回复 #60 pseudo 的帖子
谢谢srs注入虚拟机测试通过 1.03哪里有下载? 英文版好像不能启动03pe? 回复 #54 maanu 的帖子
Thanks for your suggestion. I'll try to do it.
The latest version of 0PE is shared at P&C livemesh which you have jioned.
回复 #59 maanu 的帖子
--can i modify OPE petools directory . and replace chinese tools with english versions and names ?
Yes.
Note
1. Some important components like MMC.WIM , WMP10.wim , IE6.WIM , etc. must has special mount point.
for example, right click IE6.WIM and select "send to wimnt", you will see the mount point is B:\IE6, not in the base mount path of wimnt (B:\WimTools).The special mount point of a .wim file can be specified by wimnt (you should learn a little on how to use wimnt tool).
2. Some .ini or .cmd files in x:\wxpe, x:\wxpe\system32 and petools\autoruns have referenced to some files in petools. They should be adjusted accordingly if petools changed.
--or are they already in english ? i have checked some tools and they are in chinese . like smart diriver backup .
MMC.WIM is already in English.
--will there any issue if i just rename it to other exe , and as you said before , at startup , the shortcuts will be generatted automatically
no problem
--or should i pack new tools in WIM file first then copy to PETOOLS ?
you can put any file to petools
--and can i share new modded OPE with complete english PETOOLS here ?
I did not say so, this is not the foreign, you can have your own understanding :)
回复 #63 rabbit1234 的帖子
There is no 03pe in English version. Do you think 03pe is neccessary ?回复 #65 pseudo 的帖子
Yes,I think it is neccessary!How can i jion P&C livemesh? Pseudo
well , where can i find WIMNT tool that can be installed in windows xp ? and i guess it is by the same brother who made PECMD ? and is only available in chinese ?
what if i just mount any WIM file with gimage x , modify it and save changes . i guess this way mount point will not effect ?
and yes as my chinese brother said , 03 seems necessery . and you have 2k3 version too .
thanks for reply.
Regards,
Maanu from Pakistan
回复 #66 rabbit1234 的帖子
Sorry, the number of mesh member has reached the limit回复 #67 maanu 的帖子
wimnt is only available in chinesehere is a link that can be installed in xp: http://bbs.wuyou.net/forum.php?mod=viewthread&tid=155198&highlight=imdisk
imagex can not recognize the mount point defined by wimnt, i think.
03-pe seems not neccessary, xp-pe can install windows vista/7, too. Post# 69
ok thank you . i have understood it now.
Regards,
Maanu from Pakistan zhi chi zhi chi
good good study,day day up ! very good !go onwaiting... 虽然没找到我想找的东西,但还是支持一下。 看不懂啊 呜呜汗 Oh,My god!英语,天啊,看到就头痛……
下面还有很多东西还是中文,没有英化啊。
[ 本帖最后由 xianglang 于 2010-1-28 13:33 编辑 ]
回复 #75 xianglang 的帖子
只是部分英文化,很多还是中文全英化我也看不懂了:)
懂多少,有时间就英化多少。
有人一看是英文版就吓退了,其实目前英文版不会成为理解障碍,只是习惯、顺眼与否的问题,大家英文水平绝对比我高。
回复 #76 pseudo 的帖子
只知道P大.you good. P大有崇洋媚外的嫌疑^_^
理由嘛,很简单,你的母语是汉语,现在只...... 原帖由 zhaohj 于 2010-1-28 14:53 发表 http://bbs.wuyou.net/images/common/back.gif
P大有崇洋媚外的嫌疑^_^
理由嘛,很简单,你的母语是汉语,现在只......
你没搞对方向嘛
崇洋媚外其性质属于进口
而p大英文版的性质属于出口,或者说是准备出口 回复 #77 66369 的帖子
谢谢水老鼓励。
回复 #78 zhaohj 的帖子
弄英文版直接原因是缘于国外朋友的请求。
根本原因z兄有所不知:
我得硬头皮学写英文,才能保饭碗...
英文要到写文章时感觉用英文比用中文好表达的程度。 呵呵,P大不要当真,应该鼓励你才对。看懂英文在这里的朋友大多不难,而要写英文估计并不很多。
不管是进口或出口,多学点英文没错! 想下载1。26,但不知在哪下 pseudo,你传给我的这个F6模块让我难忘啊...HEHE.我没有太多时间研究你的OPE,可惜啊...不过我对F6模块有兴趣.我试了一下.你的F6.ZIP和SRS2.ZIP都可以在ICH9M的南桥上顺利进入PE和安装系统,但是SRS2.ZIP放在ZHHSH的F6模块会出现7B错误.过几天我在找找其它电脑实测一下...QQ再加我一下14831073.今天在办公室用的QQ08版加了你,回到家用QQ 09新版却找不到你了.HEHE the nethood can not run.
when i visit my shool neighbor ,it can't find the workgroup in my shool netNeighbor . where can i download version1.04 besides updating it from livemesh for i havn't registered?
thanks. 我的英文是小学水平,真的看见就头痛。不过如果一些软件没有汉化或者中文版,也只好硬着头皮用英文版的——借助词典和见惯的英文单词字母,不太复杂的也勉强可以用一下。PSEUDO出个英文版也好,我们可以学下英文,而非中文的人见到0PE这个好PE,也可以推动他们学下中文,哈哈…… 原帖由 rongw 于 2010-1-28 19:58 发表 http://bbs.wuyou.net/images/common/back.gif
the nethood can not run.
when i visit my shool neighbor ,it can't find the workgroup in my shool netNeighbor .
Yes, it can not work now.
May be PENETCFG is helpful
原帖由 geogls 于 2010-1-28 21:31 发表 http://bbs.wuyou.net/images/common/back.gif
where can i download version1.04 besides updating it from livemesh for i havn't registered?
thanks.
sorry, other download links may have to wait a few days, because my network environment is not good, it is difficult for me to directly upload by myself.
[ 本帖最后由 pseudo 于 2010-1-29 15:54 编辑 ] it is really difficult to use live mesh .can any brother upload to 115 or ftp ?
not Mr.Pseudo
i really dont know how i can download it from mesh/
thanks
Regards ,
Maanu from Pakistan @pseudo
now you can use new out command: goto
replace fallback command in 0pe.lst
http://www.chenall.com/blog/2010/01/grub4dos_GOTO.html
goto is based on fallback.
eg.
cat --length=0 ()/CSPE/EXT.ZIP || goto 15
if no exist()/cspe/ext.zipgoto entry(menu) 15
if use fallback command,like below
fallback 15
cat --length=0 ()/cspe/ext.zip || kernel English edition livemesh already in FTP://60.190.19.108 synchronization