newswan 发表于 2012-10-8 13:08:52

win8+ewf会进入自动修复

超级本,ssd24g
win8rtm,kms激活,安装在ssd上,用户目录放在d盘,
bios启动硬盘grldr,grldr交换磁盘,然后从ssd启动

休眠已禁用
从http://bbs.pcbeta.com/viewthread-1089111-1-1.html下载EWF_FBWF_Mgmt_WIN8.7z
安装ewf,开启了c盘保护
未安装fbwf

问题是,如果c盘有数据修改,重启或者关机后开机,会进入修复,选择不修复,重启后,就能正常启动

[ 本帖最后由 newswan 于 2012-10-8 13:24 编辑 ]

2012www.zzoo.cc 发表于 2012-10-8 13:53:06

11ydy 发表于 2012-10-8 14:03:42

你可以执行命令
bcdedit /set {default} bootstatuspolicy ignoreallfailures

newswan 发表于 2012-10-8 22:56:51

还原系统
在“安装ewf_x64.cmd”最后添加pasuse,然后以管理员身份执行
结果如下,有error

ImageX Tool for Windows
Copyright (C) Microsoft Corp. All rights reserved.
Version: 6.1.7600.16385


[ 100% ] Applying progress

Successfully applied image.

Total elapsed time: less than 1 sec




Microsoft (R) MOF 编译器版本 6.2.9200.16384
Copyright (c) Microsoft Corp. 1997-2006. All rights reserved.
Parsing MOF file: C:\windows\system32\EWFProvider.mof
MOF file has been successfully parsed
Storing data in the repository...
完成!WFCFG: EwfInstallConfiguration ---
WFCFG: Adding disk = 0 part = 1to default EWF configuration
WFCFG: Adding disk = 0 part = 2to default EWF configuration
WFCFG: Adding disk = 0 part = 3to default EWF configuration
WFCFG: Adding disk = 0 part = 4to default EWF configuration
WFCFG: Adding disk = 1 part = 1to default EWF configuration
WFCFG: Adding disk = 1 part = 0to default EWF configuration
WFCFG: Adding disk = 1 part = 0to default EWF configuration
WFCFG: Adding disk = 1 part = 0to default EWF configuration
WFCFG: Total 8 partitions configured to use EWF
WFCFG: Clearing old EWF configuration from registry (if any)...
WFCFG: Saving EWF configuration to registry:
WFCFG: DiskNumber = 0, PartNumber = 1, partitionStyle= 0
WFCFG: DiskNumber = 0, PartNumber = 2, partitionStyle= 0
WFCFG: DiskNumber = 0, PartNumber = 3, partitionStyle= 0
WFCFG: DiskNumber = 0, PartNumber = 4, partitionStyle= 0
WFCFG: DiskNumber = 1, PartNumber = 1, partitionStyle= 0
WFCFG: GetVolumeId: Failed to open handle to volume (disk = 1, partition = 0). Error = 2
WFCFG: CopyEwfConfigToRegistry: Failed to determine disk signature and partition offset with error = 2
WFCFG: GetVolumeId: Failed to open handle to volume (disk = 1, partition = 0). Error = 2
WFCFG: CopyEwfConfigToRegistry: Failed to determine disk signature and partition offset with error = 2
WFCFG: GetVolumeId: Failed to open handle to volume (disk = 1, partition = 0). Error = 2
WFCFG: CopyEwfConfigToRegistry: Failed to determine disk signature and partition offset with error = 2
WFCFG: EWFCFG: Generic command succeeded. Requesting reboot.

11ydy 发表于 2012-10-8 23:20:52

回复 #4 newswan 的帖子

EWF安装没有问题啊

newswan 发表于 2012-10-9 00:34:16

执行后 bcdedit /set {default} bootstatuspolicy ignoreallfailures
故障依旧

newswan 发表于 2012-10-9 00:34:55

这个机器不弄了,有空了用其他机器试试,谢谢11ydy

newswan 发表于 2012-10-11 18:26:29

win8企业版用uwf没问题
请问,win7用哪个好。ewf?uwf

谢谢11ydy和嵐風
页: [1]
查看完整版本: win8+ewf会进入自动修复