作者: cnn_5454 时间: 2007-8-28 17:41 标题: 德国人制作补丁 批处理a @echo offclsrem Copyright (C) 2003-05 Ansgar Wiechers & Torsten Mannrem Contact: admin@ntsvcfg.deremrem This program is free software; you can redistribute it and/or modify it underrem the terms of the GNU General Public License as published by the Free Software Foundation;rem either version 2 of the License, or (at your option) any later version.rem This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;rem without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.rem See the GNU General Public License for more details.remrem You should have received a copy of the GNU General Public License along with this program;rem if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,rem MA 02111-1307, USA.echo.REM Tested on ... WinXP_SP2REM Always basic XP64 SupportREM Modifications to BITS service (cause of v5 WindowsUpdate) - #discharged#REM Additional notices corresponding to DHCP issueREM Variables problems during RESTORE_DEFAULT usage fixedREM SMBDEVICEENABLED Restore Bug fixedREM Mod_history-09-27-2005**11-08-2005**11-29-2005**12-07-2005**12-18-2005setlocalREM *** INIT_VARS ***set CHK_SVC=YESset XPSP2=FALSEset SERVER=FALSEset NT_SERVER_CHK=TRUE:STARTecho "svc2kXp.cmd" v2.2_build7b (18.12.2005), published under GNU GPLecho ================================================================set find=%SystemRoot%\System32\find.exeset regedit=%SystemRoot%\regedit.exeif not exist "%find%" goto :NOFINDif not exist "%regedit%" goto :NOREGEDITif not "%1" == "%*" goto :SYNTAXif /I "%1"=="/?" goto :HELPif /I "%1"=="/help" goto :HELPif /I "%1"=="-h" goto :HELPif /I "%1"=="--help" goto :HELPif /I "%1"=="-?" goto :HELPif /I "%1"=="--?" goto :HELPif /I "%1"=="/fix" goto :FIXgoto :VERSION:SYNTAXecho.echo.echo !!Syntax error!!echo ________________echo Es kann nur ein oder kein Parameter angegeben werden.echo.echo Only one or no parameter allowed.goto UIT:HELPecho.echo -= Hilfe =-echo Parameter:echo /lan.......Einige Dienste fuer LAN-Betrieb werden nicht veraendert.echo /std.......Schliesst alle Ports, einige Dienste bleiben unveraendert.echo /all.......Setzt alle Vorschlaege nach www.ntsvcfg.de um (hardening).echo /restore...Nimmt die zuletzt vorgenommenen Aenderungen zurueck.echo /reLAN.....Reaktiviert Dienste, die fuer LAN-Betrieb benoetigt werden.echo /default...Setzt alle Diensteinstellungen auf urspr黱gliche Werte zur點k.echo.echo Parameters:echo /lan.......Some services needed for LAN-usage stay unchanged!echo /std.......Closes all Ports, but some services stay unchangedecho /all.......Changes all issues recommended by www.ntsvcfg.de ("hardening")echo /restore...Undo last changes.echo /reLAN.....Reactivates services required for LAN.echo /default...Restoring factory service settings (before first time usage)echo.echo example: svc2kxp.cmd /allecho.set /P CHS= [Press "G" for GNU GPL informations or "Q" for quit]?if /I "%CHS%"=="G" goto :GNU_GPLif /I "%CHS%"=="Q" goto UIT_EXTCLSgoto :HELP:GNU_GPLCLSecho Informations about GNU-General Public License for "svc2kxp.cmd"echo ===============================================================echo.echo Copyright (C) 2003-05 Ansgar Wiechers, Torsten Mannecho Contact: admin@ntsvcfg.deecho.echo This program is free software; you can redistribute it and/or modify it underecho the terms of the GNU General Public License as published by the Free Softwareecho Foundation; either version 2 of the License, or (at your option) any laterecho version. This program is distributed in the hope that it will be useful, butecho WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY orecho FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for moreecho details.echo.echo You should have received a copy of the GNU General Public License along withecho this program; if not, write to the:echo.echo Free Software Foundation, Inc.echo 59 Temple Place, Suite 330echo Boston, MA 02111-1307, USA.echo.set /P CHS= [Press "H" for help or "Q" for quit]?CLSif /I "%CHS%"=="H" goto :HELPif /I "%CHS%"=="Q" goto UIT_EXTgoto GNU_GPL:VERSIONecho Checking system version ...if /I "%NT_SERVER_CHK%"=="FALSE" goto :SKIP_NT_SERVER_CHKREM Checking for running server version "%regedit%" /e "%TEMP%\~svr.txt" "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\ProductOptions" type "%TEMP%\~svr.txt"|"%find%" /i "Server" >NUL if not errorlevel 1 set SERVER=TRUE type "%TEMP%\~svr.txt"|"%find%" /i "LanMan" >NUL if not errorlevel 1 set SERVER=TRUE if exist "%TEMP%\~svr.txt" del /F /Q "%TEMP%\~svr.txt" if /I "%SERVER%"=="TRUE" goto :NTSERVER:SKIP_NT_SERVER_CHKver | "%find%" /i "Windows 2000" > nulif not errorlevel 1 goto :OS2Kver | "%find%" /i "Windows XP" > nulif not errorlevel 1 goto :OSXPver | "%find%" /i "Microsoft Windows [Version 5.2.3790]" > nulif not errorlevel 1 goto :OSXP64echo !!Failed!!echo __________echo.echo Dieses Script ist nur unter Windows 2000 oder XP lauffaehig!echo.echo This script works only on Windows 2000/XP machines!echo.goto UIT:NOFINDecho.echo !!Failed!!echo __________echo.echo Leider konnte folgende Datei nicht gefunden werden:echo.echo Sorry, but following file is missing:echo.echo.echo # %SystemRoot%\System32\FIND.EXEecho.echo.goto UIT:NOREGEDITecho.echo !!Failed!!echo __________echo.echo Leider konnte folgende Datei nicht gefunden werden:echo.echo Sorry, but following file is missing:echo.echo.echo # %SystemRoot%\REGEDIT.EXEecho.echo.goto UIT:NTSERVERecho.echo !!Failed!!echo __________echo.echo Dieses Script unterstuetzt keine NT Server Versionen!echo.echo This script doesn't support NT server versions!echo.goto UIT:OS2Krem Specific OS Detection Iset SYSTEM=2krem Testing for XP ServicePacks "%regedit%" /e "%TEMP%\~svclist.txt" "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion" type "%TEMP%\~svclist.txt"|"%find%" /i "Service Pack 4" >NUL if errorlevel==1 ( type "%TEMP%\~svclist.txt"|"%find%" /i "Service Pack 3" >NUL if errorlevel==1 ( type "%TEMP%\~svclist.txt"|"%find%" /i "Service Pack 2" >NUL if errorlevel==1 ( type "%TEMP%\~svclist.txt"|"%find%" /i "Service Pack 1" >NUL if errorlevel==1 ( echo !Windows 2000 [no or unknown Service Pack] detected! goto NO_2KSP ) echo !Windows 2000 [Service Pack 1] detected! goto :NO_2KSP ) echo !Windows 2000 [Service Pack 2] detected! goto :NO_2KSP ) echo !Windows 2000 [Service Pack 3] detected! goto :NO_2KSP ) echo !Windows 2000 [Service Pack 4] detected! goto :NO_2KSP:NO_2kSPif exist "%TEMP%\~svclist.txt" del /F /Q "%TEMP%\~svclist.txt"goto :CONTINUE:OSXPrem Specific OS detection IIset SYSTEM=xprem Testing for XP ServicePack 2 "%regedit%" /e "%TEMP%\~svclist.txt" "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion" type "%TEMP%\~svclist.txt"|"%find%" /i "Service Pack 2" >NUL if errorlevel==1 ( type "%TEMP%\~svclist.txt"|"%find%" /i "Service Pack 1" >NUL if errorlevel==1 ( SET XPSP2=FALSE echo !Windows XP [no or unknown Service Pack] detected! goto NO_XPSP ) SET XPSP2=FALSE echo !Windows XP [Service Pack 1] detected! goto :NO_XPSP ) SET XPSP2=TRUE echo !Windows XP [ServicePack 2] detected! goto :NO_XPSP:OSXP64rem Specific OS detection IIset SYSTEM=xprem Testing for XP ServicePack 2 "%regedit%" /e "%TEMP%\~svclist.txt" "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion" type "%TEMP%\~svclist.txt"|"%find%" /i "Service Pack 2" >NUL if errorlevel==1 ( type "%TEMP%\~svclist.txt"|"%find%" /i "Service Pack 1" >NUL if errorlevel==1 ( SET XPSP2=FALSE echo !EXPERIMENTAL! Windows XP64 [no or unknown Service Pack] detected! goto NO_XPSP ) SET XPSP2=FALSE echo !EXPERIMENTAL! Windows XP64 [Service Pack 1] detected! goto :NO_XPSP ) SET XPSP2=TRUE echo !EXPERIMENTAL! Windows XP64 [ServicePack 2] detected! goto :NO_XPSP:NO_XPSPif exist "%TEMP%\~svclist.txt" del /F /Q "%TEMP%\~svclist.txt"goto :CONTINUE:CONTINUEREM Creating subdirectory "ntsvcfg" in userprofile if necessaryif not exist "%USERPROFILE%\ntsvcfg\*.*" mkdir "%USERPROFILE%\ntsvcfg"REM Moving old script backup files to ...\%USERNAME%\ntsvcfg : if exist "%USERPROFILE%\dcom.reg" move /Y "%USERPROFILE%\dcom.reg" "%USERPROFILE%\ntsvcfg\dcom.reg" if exist "%USERPROFILE%\dcomp.reg" move /Y "%USERPROFILE%\dcomp.reg" "%USERPROFILE%\ntsvcfg\dcomp.reg" if exist "%USERPROFILE%\services.reg" move /Y "%USERPROFILE%\services.reg" "%USERPROFILE%\ntsvcfg\services.reg" if exist "%USERPROFILE%\current_services_config.reg" move /Y "%USERPROFILE%\current_services_config.reg" "%USERPROFILE%\ntsvcfg\current_services_config.reg" if exist "%USERPROFILE%\smb.reg" move /Y "%USERPROFILE%\smb.reg" "%USERPROFILE%\ntsvcfg\smb.reg" if exist "%USERPROFILE%\FPRINT.REF" move /Y "%USERPROFILE%\FPRINT.REF" "%USERPROFILE%\ntsvcfg\FPRINT.REF" if exist "%USERPROFILE%\handler_aim.reg" move /Y "%USERPROFILE%\handler_aim.reg" "%USERPROFILE%\ntsvcfg\handler_aim.reg" if exist "%USERPROFILE%\handler_gopher.reg" move /Y "%USERPROFILE%\handler_gopher.reg" "%USERPROFILE%\ntsvcfg\handler_gopher.reg" if exist "%USERPROFILE%\handler_telnet.reg" move /Y "%USERPROFILE%\handler_telnet.reg" "%USERPROFILE%\ntsvcfg\handler_telnet.reg" if exist "%USERPROFILE%\services.reg.default" move /Y "%USERPROFILE%\services.reg.default" "%USERPROFILE%\ntsvcfg\services.reg.default" if exist "%USERPROFILE%\dcom.reg.default" move /Y "%USERPROFILE%\dcom.reg.default" "%USERPROFILE%\ntsvcfg\dcom.reg.default" if exist "%USERPROFILE%\dcomp.reg.default" move /Y "%USERPROFILE%\dcomp.reg.default" "%USERPROFILE%\ntsvcfg\dcomp.reg.default" if exist "%USERPROFILE%\smb.reg.default" move /Y "%USERPROFILE%\smb.reg.default" "%USERPROFILE%\ntsvcfg\smb.reg.default" if exist "%USERPROFILE%\handler_aim.reg.default" move /Y "%USERPROFILE%\handler_aim.reg.default" "%USERPROFILE%\ntsvcfg\handler_aim.reg.default" if exist "%USERPROFILE%\handler_gopher.reg.default" move /Y "%USERPROFILE%\handler_gopher.reg.default" "%USERPROFILE%\ntsvcfg\handler_gopher.reg.default" if exist "%USERPROFILE%\handler_telnet.reg.default" move /Y "%USERPROFILE%\handler_telnet.reg.default" "%USERPROFILE%\ntsvcfg\handler_telnet.reg.default"REM *****Declarations*****set SELECT="no"set SVC_BAK=%USERPROFILE%\ntsvcfg\services.regset SVC_SAV=%USERPROFILE%\ntsvcfg\current_services_config.regset DCOM_BAK=%USERPROFILE%\ntsvcfg\dcom.regset DCOMP_BAK=%USERPROFILE%\ntsvcfg\dcomp.regset SMB_BAK=%USERPROFILE%\ntsvcfg\smb.regset DCOM_TMP=%TEMP%\dcomoff.regset DCOMP_TMP=%TEMP%\dcompoff.regset SMB_TMP=%TEMP%\smboff.regset FPRINT=%USERPROFILE%\ntsvcfg\FPRINT.REFset HANDLER1=%USERPROFILE%\ntsvcfg\handler_aim.regset HANDLER2=%USERPROFILE%\ntsvcfg\handler_gopher.regset HANDLER3=%USERPROFILE%\ntsvcfg\handler_telnet.regset NB_TMP=%TEMP%\nb_off.vbsset srctmp=%USERPROFILE%\ntsvcfg\~srcreate.vbsset DHCP_CHANGES="YES"REM *****Options*****set SCHEDULER_ENABLED=NOset UseXPSysRestore=YESset RESTORE=NOset SVC_MOD=NOset USE_FPRINT=YESset Deactivate_NetBIOS=YESset RESTORE_MODE=2REM *****APP_PATHs******set NET=%SystemRoot%\system32\net.exeset SC=%SystemRoot%\system32\sc.exeset FC=%SystemRoot%\system32\fc.exeset IPCONFIG=%SystemRoot%\system32\ipconfig.exeecho Checking available permissions: [local], please wait ..."%net%" user "%USERNAME%" 2> nul | "%find%" /i "admin" | "%find%" /i /v "name" > nulif errorlevel 1 ( echo " " " : [domain], please wait ... "%net%" user "%USERNAME%" /domain 2> nul | "%find%" /i "admin" | "%find%" /i /v "name" > nul if errorlevel 1 ( echo. echo Failed! echo __________ echo Leider verfuegen Sie nicht ueber die erforderlichen Rechte! echo Melden Sie sich bitte als Administrator an. echo. echo Sorry but you don't have the permissions required for this task. echo Please login as Administrator. echo. goto :END ) )set IMPORT_OLD_FILES=FALSErem searching for sc.exeif not exist "%FPRINT%" echo Checking for presence of SC.EXE ..."%sc%" qc > nul 2>&1if errorlevel 1 ( echo !!Failed!! echo __________ echo Die notwendige Datei SC.EXE konnte leider nicht unter echo [%SystemRoot%\SYSTEM32\] gefunden werden. echo Bitte laden Sie sich diese Datei von der unten genannten Adresse herunter: echo. echo SC.EXE couldn't be found in [%SystemRoot%\SYSTEM32\]. echo Please download it from following location: echo. echo. echo -= ftp://ftp.microsoft.com/reskit/win2000/sc.zip =- echo. echo Self-installing SC.EXE echo ====================== echo svx2kxp.cmd kann versuchen, die notwendige Datei selbst zu installieren. echo Hierzu benoetigen Sie eine bestehende Internetverbindung. echo. echo svc2kxp.cmd may try to download the required file SC.EXE itself if an echo active internet connection exists. goto :SC_DOWNLOAD )if /I "%1"=="/all" ( set SELECT="/all" goto :SKIP_MENUE )if /I "%1"=="/relan" ( set SELECT="/relan" goto :SKIP_MENUE )if /I "%1"=="/std" ( set SELECT="/std" goto :SKIP_MENUE )if /I "%1"=="/default" goto :RESTORE_DEFAULTSrem checking for modified servicesif /I %CHK_SVC%==YES ( if /I %USE_FPRINT%==YES ( if exist "%FPRINT%" ( rem Creating fingerprint of current service settings... if exist "%USERPROFILE%\ntsvcfg\svc2cmp.sav" del /F /Q "%USERPROFILE%\ntsvcfg\svc2cmp.sav" "%sc%" query type= service state= all bufsize= 8192 | %FIND% "SERVICE_NAME" >%TEMP%\~svclist.txt for /F "tokens=1*" %%a in (%TEMP%\~svclist.txt) do ( echo %%b >>"%USERPROFILE%\ntsvcfg\svc2cmp.sav" "%sc%" query "%%b" | %FIND% "STATE" >>"%USERPROFILE%\ntsvcfg\svc2cmp.sav" "%sc%" qc "%%b" | %FIND% "DISPLAY_NAME" >>"%USERPROFILE%\ntsvcfg\svc2cmp.sav" "%SC%" qc "%%b" | %FIND% "START_TYPE" >>"%USERPROFILE%\ntsvcfg\svc2cmp.sav" echo. >> "%USERPROFILE%\ntsvcfg\svc2cmp.sav" ) del "%TEMP%\~svclist.txt" "%FC%" "%FPRINT%" "%USERPROFILE%\ntsvcfg\svc2cmp.sav" >NUL if errorlevel 1 goto IFF goto OK IFF echo Checking for modified services ... failed-services maybe modified! [E]valuate set SVC_MOD=YES goto :MOD_END :OK echo Checking for modified services ... OK set SVC_MOD=NO if exist "%USERPROFILE%\ntsvcfg\svc2cmp.sav" del /F /Q "%USERPROFILE%\ntsvcfg\svc2cmp.sav" goto :MOD_END :MOD_END REM ) ) )set CHK_SVC=NOif /I "%1"=="/restore" goto :RESTORE:MENUEif /I "%1"=="/lan" goto :SKIP_MENUEecho.echo -= Auswahl / Overview =-echo.echo Bitte waehlen sie einen Punkt aus, den sie ausfuehren moechten:echo.echo (1) LAN: Einige Dienste fuer LAN-Betrieb werden nicht veraendert.echo (2) Standard: Schliesst alle Ports, aber einige Dienste bleiben unveraendert.echo (3) ALL: Setzt alle Vorschlaege nach www.ntsvcfg.de um (hardening).echo (4) Restore: Nimmt die zuletzt vorgenommenen Aenderungen zurueck.echo ______________________________________________________________________________echo.echo Please choose one task you want to do:echo.echo (1) LAN: Some services needed for LAN-usage stay unchangedecho (2) Standard: Close ports but some services stay unchangedecho (3) ALL: Making all changes described at www.ntsvcfg.de (hardening)echo (4) restore: Restores last changes made.echo.set /P CHS= Bitte waehlen Sie/Please choose: [1],[2],[3],[4], [M]ore options or [Q]uit?if /I "%CHS%"=="1" ( set SELECT="/lan" goto :SKIP_MENUE )if /I "%CHS%"=="2" ( set SELECT="/std" goto :SKIP_MENUE )if /I "%CHS%"=="3" ( set SELECT="/all" goto :SKIP_MENUE )if /I "%CHS%"=="4" goto :RESTOREif /I "%CHS%"=="R" goto :RESTOREif /I "%CHS%"=="M" goto :MORE_OPTIONSif /I "%SVC_MOD%"=="YES" if /I "%CHS%"=="E" goto :EVALUATE_SERVICESif /I "%CHS%"=="G" goto :CREATING_NEW_FINGERPRINTif /I "%CHS%"=="Q" goto UITclsgoto :START:SKIP_MENUErem Checking if old restorefiles exists.rem if it is so old files will be restored before new changesif not exist "%SVC_BAK%" goto :NO_RESTOREif /I %RESTORE_MODE%==3 goto :NO_RESTOREif /I %RESTORE_MODE%==4 goto :NO_RESTOREset RESTORE=YESecho.echo _______________________________________________________________________echo.echo [Selected Restore Mode: %RESTORE_MODE%]echo.echo # Achtung: Alte Sicherungsdateien gefunden!echo.echo "Svc2kXp.cmd" wurde schon einmal ausgefuehrt. Damit neue Aenderungenecho korrekt durchgefuehrt werden koennen, werden die Sicherungsdateienecho eingespielt.echo.echo.echo Attention: old restore-files found!echo.echo This program runs not for the first time. To apply all new changesecho correctly old restore files will used to get an definite state.echo.echo.echo # Starting restore ...goto RESTORE_EXT:NO_RESTORErem query if taskplaner should runif /I "%SYSTEM%"=="2k" goto :SKIP_SQUERYif /I "%SYSTEM%"=="xp" ( if /I %SELECT%=="" goto :SKIP_SQUERY if /I %SELECT%=="/all" goto :SKIP_SQUERY if /I %XPSP2%==True ( set SCHEDULER_ENABLED=YES goto :SKIP_SQUERY ) )echo.echo.echo Rueckfrage / Queryecho ==================echo.echo Soll der Dienst "Taskplaner" beendet werden?echo.echo Wenn sie zeitgesteuerten Aufgaben [z.B. Antiviren-Updates] oder die automati-echo sche Erstellung von Systemwiederherstellungspunkten nicht benoetigen, drueckenecho Sie eine BELIEBIGE TASTE, um auch Port 135 [RPC] sowie Port 1025 [Taskplaner]echo zu schliessen [empfohlen!]. Andernfalls druecken Sie "N"!echo.echo.echo Should the "scheduler service" be disabled?echo.echo If you have time-controlled tasks [i.e. AV-Updates] or you will not setecho automatic system restore points press ANY KEY TO CONTINUE to close port 135echo [RPC] and port 1025 [scheduler] instantly. Otherwise press "N"echo ___________________________________________echo.set /P UNDO= Taskplaner beenden - Close scheduler [y/n]?if /I "%UNDO%"=="n" set SCHEDULER_ENABLED=YES
[[i] 本帖最后由 cnn_5454 于 2007-8-29 12:07 PM 编辑 [/i]]作者: cnn_5454 时间: 2007-8-28 17:41 标题: B :SKIP_SQUERYif not exist "%SVC_BAK%.default" ( echo. echo Creating backup of defaults ... "%regedit%" /e "%SVC_BAK%.default" HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services "%regedit%" /e "%DCOM_BAK%.default" HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Ole "%regedit%" /e "%DCOMP_BAK%.default" HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Rpc "%regedit%" /e "%SMB_BAK%.default" HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NetBT\Parameters "%regedit%" /e "%HANDLER1%.default" HKEY_CLASSES_ROOT\AIM "%regedit%" /e "%HANDLER2%.default" HKEY_CLASSES_ROOT\gopher "%regedit%" /e "%HANDLER3%.default" HKEY_CLASSES_ROOT\telnet echo ... done. )if exist "%SVC_BAK%" ( if /I %RESTORE_MODE%==2 goto :SKIP_SAVING if /I %RESTORE_MODE%==4 goto :SKIP_SAVING )rem saving registry settingsecho _________________________________________________________________________echo.echo [Selected Restore Mode: %RESTORE_MODE%]echo.echo Saving services settings toecho %SVC_BAK% ..."%regedit%" /e "%SVC_BAK%" HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servicesecho Saving DCOM settings toecho %DCOM_BAK% ..."%regedit%" /e "%DCOM_BAK%" HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Oleecho Saving DCOM standard protocols settings toecho %DCOMP_BAK% ..."%regedit%" /e "%DCOMP_BAK%" HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Rpcecho Saving SMB settings toecho %SMB_BAK%"%regedit%" /e "%SMB_BAK%" HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NetBT\Parametersecho Saving URL-Handler [AIM, GOPHER, TELNET] toecho %HANDLER1%"%regedit%" /e "%HANDLER1%" HKEY_CLASSES_ROOT\AIMecho %HANDLER2%"%regedit%" /e "%HANDLER2%" HKEY_CLASSES_ROOT\gopherecho %HANDLER3%"%regedit%" /e "%HANDLER3%" HKEY_CLASSES_ROOT\telnetecho.echo All done.echo ___________________________________________echo.:SKIP_SAVINGif /I "%SYSTEM%"=="xp" ( if /I %UseXPSysRestore%==YES ( goto :XPSYSRESTORE ) ):XPSYSRESTORE_DONErem reconfigure servicesrem startup: demandecho.echo Setting services to "demand" ...echo ___________________________________________echo.echo # Checking DHCP ..."%ipconfig%" -all | "%find%" /i "Lease" > nulif errorlevel 1 ( rem trying other method for DHCP "%ipconfig%" -all | "%find%" /i "DHCP-Server" > nul if errorlevel 1 ( echo ... no active DHCP found. echo. echo Hinweis echo ======= echo Ihre Konfiguration deutet an, das kein DHCP benoetigt wird. Falls echo Sie dennoch einen DSL-Internetzugang besitzen und DHCP irrtuemlich echo deaktivert wurde, kann es nach einem Neustart zu Problemen mit der echo Internetverbindung kommen. Starten sie zur Problembehebung den echo DHCP-Dienst manuell neu. echo. echo Notice echo ====== echo Your configuration indicates that DHCP no longer will be required. echo But if you use a DSL internet connection this choice probably echo might be wrong. If you experiences problems during accessing the echo internet please re-activate the "DHCP Service" manually. echo. echo ___________________________________________ echo. "%sc%" config DHCP start= demand goto :SKIP_DHCP ))set DHCP_CHANGES="NO"echo ... DHCP active, status of service will NOT be changed!echo.:SKIP_DHCP"%sc%" config dmadmin start= demand"%sc%" config DNSCache start= demand"%sc%" config mnmsrvc start= demand"%sc%" config MSIServer start= demand"%sc%" config NetDDE start= demand"%sc%" config NetDDEdsdm start= demand"%sc%" config Netman start= demand"%sc%" config NTLMSsp start= demand"%sc%" config NtmsSvc start= demand"%sc%" config PolicyAgent start= demand"%sc%" config RASAuto start= demand"%sc%" config RASMan start= demand"%sc%" config RSVP start= demand"%sc%" config Scardsvr start= demand"%sc%" query ScardDrv | "%find%" /i "OpenService FAILED" >NULif errorlevel 1 "%sc%" config ScardDrv start= demandif /I %XPSP2%==True ( rem If XP SP2 is installed there are less changes to XP-ICF if /I %SELECT%=="/std" goto :SKIP_FIREWALL )"%sc%" config SharedAccess start= demand:SKIP_FIREWALL"%sc%" config Sysmonlog start= demand"%sc%" config TAPISrv start= demand"%sc%" config TrkWks start= demand"%sc%" config UPS start= demand"%sc%" config W32Time start= demand"%sc%" config WMI start= demandif /I %SELECT%=="/all" ( "%sc%" config SamSs start= demand "%sc%" config LmHosts start= demand "%sc%" config Winmgmt start= demand )if /I "%SYSTEM%"=="2k" ( "%sc%" config AppMgmt start= demand "%sc%" config Browser start= demand "%sc%" config clipsrv start= demand "%sc%" config EventSystem start= demand "%sc%" config Fax start= demand "%sc%" config netlogon start= demand "%sc%" config RPCLocator start= demand "%sc%" config Utilman start= demand if /I %SELECT%=="/all" ( "%sc%" config seclogon start= demand "%sc%" config RPCSs start= demand "%sc%" config lanmanServer start= demand ) )if /I "%SYSTEM%"=="xp" ( "%sc%" config ALG start= demand "%sc%" config FastUserSwitchingCompatibility start= demand "%sc%" config helpsvc start= demand "%sc%" config ImapiService start= demand "%sc%" config Nla start= demand "%sc%" config RdSessMgr start= demand "%sc%" config seclogon start= demand "%sc%" config stisvc start= demand "%sc%" config SwPrv start= demand "%sc%" config TermService start= demand "%sc%" config upnphost start= demand "%sc%" config VSS start= demand "%sc%" query WmdmPmSp | "%find%" /i "OpenService FAILED" >NUL if errorlevel 1 "%sc%" config WmdmPmSp start= demand "%sc%" config WmiApSrv start= demand rem Wireless Zero Configuration - fuer WLAN-Verbindungen notwendig. rem Falls erforderlich auf AUTO stellen. rem "%sc%" config WZCSVC start= demand )echo.rem startup: autoecho Setting services to "auto" ..."%sc%" config dmserver start= auto"%sc%" config eventlog start= auto"%sc%" config PlugPlay start= auto"%sc%" config ProtectedStorage start= auto"%sc%" config sens start= auto"%sc%" config spooler start= autoif /I "%SYSTEM%"=="2k" ( "%sc%" config lanmanworkstation start= auto "%sc%" config alerter start= auto )if /I "%SYSTEM%"=="xp" ( "%sc%" query InteractiveLogon | "%find%" /i "OpenService FAILED" >NUL if errorlevel 1 "%sc%" config InteractiveLogon start= auto "%sc%" config Audiosrv start= auto "%sc%" config CryptSvc start= auto "%sc%" config RPCSs start= auto "%sc%" config ShellHWDetection start= auto "%sc%" config srservice start= auto "%sc%" query uploadmgr | "%find%" /i "OpenService FAILED" >NUL if errorlevel 1 "%sc%" config uploadmgr start= auto "%sc%" config WebClient start= auto )echo.rem startup: disabledecho Setting services to "disabled" ..."%sc%" config cisvc start= disabled"%sc%" config MSDTC start= disabled"%sc%" config RemoteAccess start= disabled"%sc%" config TlntSvr start= disabled"%sc%" config messenger start= disabledif /I %SELECT%=="/all" ( "%sc%" query BITS | "%find%" /i "SERVICE_NAME" >NUL if not errorlevel 1 "%sc%" config BITS start= disabled "%sc%" query wuauserv | "%find%" /i "SERVICE_NAME" >NUL if not errorlevel 1 "%sc%" config wuauserv start= disabled "%sc%" config schedule start= disabled "%sc%" config RemoteRegistry start= disabled )if /I "%SYSTEM%"=="xp" ( "%sc%" config ERSvc start= disabled "%sc%" config HidServ start= disabled "%sc%" config SSDPSRV start= disabled if /I %SELECT%=="/lan" ( if /I %SCHEDULER_ENABLED%==NO "%sc%" config schedule start= disabled ) if /I %SELECT%=="/std" ( if /I %SCHEDULER_ENABLED%==NO "%sc%" config schedule start= disabled ) if /I %XPSP2%==True ( echo. echo XPSP2: Disabling Security Center ... "%sc%" config wscsvc start= disabled ) )echo.echo ------------------echo # Checking and stopping unnecessary system services ...echo."%sc%" query cisvc | "%find%" /i "4 RUNNING" >NUL if not errorlevel 1 "%net%" stop cisvc"%sc%" query RemoteAccess | "%find%" /i "4 RUNNING" >NUL if not errorlevel 1 "%net%" stop RemoteAccess"%sc%" query TlntSvr | "%find%" /i "4 RUNNING" >NUL if not errorlevel 1 "%net%" stop TlntSvr"%sc%" query MSDTC | "%find%" /i "4 RUNNING" >NUL if not errorlevel 1 "%net%" stop MSDTC"%sc%" query messenger | "%find%" /i "4 RUNNING" >NUL if not errorlevel 1 "%net%" stop messengerif /I %SELECT%=="/all" ( "%sc%" query BITS | "%find%" /i "SERVICE_NAME" >NUL if not errorlevel 1 ( "%sc%" query BITS | "%find%" /i "4 RUNNING" >NUL if not errorlevel 1 "%net%" stop BITS ) "%sc%" query wuauserv | "%find%" /i "SERVICE_NAME" >NUL if not errorlevel 1 ( "%sc%" query wuauserv | "%find%" /i "4 RUNNING" >NUL if not errorlevel 1 "%net%" stop wuauserv ) "%sc%" query schedule | "%find%" /i "4 RUNNING" >NUL if not errorlevel 1 "%net%" stop schedule )if /I "%SYSTEM%"=="xp" ( if /I %SELECT%=="/lan" ( if /I %SCHEDULER_ENABLED%==NO "%net%" ( "%sc%" query schedule | "%find%" /i "4 RUNNING" >NUL if not errorlevel 1 "%net%" stop schedule ) ) if /I %SELECT%=="/std" ( if /I %SCHEDULER_ENABLED%==NO "%net%" ( "%sc%" query schedule | "%find%" /i "4 RUNNING" >NUL if not errorlevel 1 "%net%" stop schedule ) if /I %XPSP2%==True ( "%sc%" query wscsvc | "%find%" /i "4 RUNNING" >NUL if not errorlevel 1 "%net%" stop wscsvc ) )echo ------------------echo Disabling DCOM ...echo REGEDIT4 > "%DCOM_TMP%"echo. >> "%DCOM_TMP%"echo [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Ole] >> "%DCOM_TMP%"echo "EnableDCOM"="N" >> "%DCOM_TMP%"echo "EnableDCOMHTTP"="N" >> "%DCOM_TMP%"echo. >> "%DCOM_TMP%"echo. >> "%DCOM_TMP%""%regedit%" /s "%DCOM_TMP%"del /F /Q "%DCOM_TMP%"echo Disabling DCOM standard protocols ...echo REGEDIT4 > "%DCOMP_TMP%"echo. >> "%DCOMP_TMP%"echo [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Rpc] >> "%DCOMP_TMP%"echo "DCOM Protocols"=hex(7):00,00,00,00 >> "%DCOMP_TMP%"echo. >> "%DCOMP_TMP%"echo. >> "%DCOMP_TMP%""%regedit%" /s "%DCOMP_TMP%"del /F /Q "%DCOMP_TMP%" echo Disabling port 135 (maybe 1025 too) ... echo - Removing RPC Client Protocols echo REGEDIT4 > "%SMB_TMP%" echo [-HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Rpc\ClientProtocols] >> "%SMB_TMP%" echo. >> "%SMB_TMP%" if /I %SCHEDULER_ENABLED%==NO ( echo - Advanced RPC Configuration echo [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Rpc\Internet] >> "%SMB_TMP%" echo "PortsInternetAvailable"="N" >> "%SMB_TMP%" echo "UseInternetPorts"="N" >> "%SMB_TMP%" echo. >> "%SMB_TMP%" ) if /I %XPSP2%==TRUE ( echo - Advanced RPC Configuration echo [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Rpc\Internet] >> "%SMB_TMP%" echo "PortsInternetAvailable"="N" >> "%SMB_TMP%" echo "UseInternetPorts"="N" >> "%SMB_TMP%" echo. >> "%SMB_TMP%" ) echo - Removing needless URL Handler [AIM,gopher,telnet] echo [-HKEY_CLASSES_ROOT\AIM] >> "%SMB_TMP%" echo [-HKEY_CLASSES_ROOT\gopher] >> "%SMB_TMP%" echo [-HKEY_CLASSES_ROOT\telnet] >> "%SMB_TMP%" echo. >> "%SMB_TMP%" echo. >> "%SMB_TMP%" "%regedit%" /s "%SMB_TMP%" del /F /Q "%SMB_TMP%"if /I %SELECT%=="/all" ( echo. echo Disabling SMB port 445 ... echo REGEDIT4 > "%SMB_TMP%" echo. >> "%SMB_TMP%" echo [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NetBT\Parameters] >> "%SMB_TMP%" echo "SMBDeviceEnabled"=dword:00000000 >> "%SMB_TMP%" echo. >> "%SMB_TMP%" echo. >> "%SMB_TMP%" "%regedit%" /s "%SMB_TMP%" del /F /Q "%SMB_TMP%" set REBOOT_REQUIRED=yes )if /I %SELECT%=="/std" ( echo. echo Disabling SMB port 445 ... echo REGEDIT4 > "%SMB_TMP%" echo. >> "%SMB_TMP%" echo [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NetBT\Parameters] >> "%SMB_TMP%" echo "SMBDeviceEnabled"=dword:00000000 >> "%SMB_TMP%" echo. >> "%SMB_TMP%" echo. >> "%SMB_TMP%" "%regedit%" /s "%SMB_TMP%" del /F /Q "%SMB_TMP%" set REBOOT_REQUIRED=yes )if /I %SELECT%=="/std" goto :NB_DISABLEif /I %SELECT%=="/all" goto :NB_DISABLEgoto :SKIP_NB_DISABLE:NB_DISABLE if /I %DEACTIVATE_NETBIOS%==NO ( echo. echo. Due problems with SP2 and deactivating NetBIOS this option echo will be skipped. echo. goto :SKIP_NB_DISABLE ) rem Because of problems with SP2 Netbios: if /I %XPSP2%==True ( echo. echo Note: echo ----- echo If you experiencing problems after updating Windows XP with echo Service Pack 2 please do following: echo. echo set Deactivate_NetBIOS=NO echo. ) rem *** Thx2 Johannes Lichtenberger for the following lines using VBScript*** echo Disable NetBios on all local interfaces ... echo. echo On Error Resume Next>> "%nb_tmp%" echo.>> "%nb_tmp%" echo TcpipoverNetbios = 2 '0=NetbiosfromDHCP 1=EnableNetbios 2=DisableNetbios>> "%nb_tmp%" echo.>> "%nb_tmp%" echo strComputer = ".">> "%nb_tmp%" echo Set objWMIService = GetObject("winmgmts:\\" ^& strComputer ^& "\root\cimv2")>> "%nb_tmp%" echo Set objNICs = objWMIService.ExecQuery _>> "%nb_tmp%" echo ("Select * From Win32_NetworkAdapterConfiguration Where IPEnabled = True")>> "%nb_tmp%" echo For Each objNic In objNICs>> "%nb_tmp%" echo errTcpipNetbios = objNic.SetTCPIPNetBIOS(TcpipoverNetbios)>> "%nb_tmp%" echo Next>> "%nb_tmp%" "%SYSTEMROOT%\SYSTEM32\CSCRIPT.EXE" "%nb_tmp%" del /F /Q "%nb_tmp%" set REBOOT_REQUIRED=yes:SKIP_NB_DISABLErem Skip Billboard because /all is usedif /I %SELECT%=="/all" goto :SW_ALLif /I %SELECT%=="/std" goto :SW_ALLif /I %SELECT%=="/relan" goto :SW_ALLecho.echo ___________________________________________________________________echo.echo *** Zusammenfassung / Result ***echo.echo Es wurden NICHT alle Aenderungen umgesetzt!echo Um alle Vorschlaege von kssysteme.de umzusetzen, verwenden Sieecho bitte den Parameter '/all' oder waehlen Sie im Menue den Punkt "3".if /I %DHCP_CHANGES%=="YES" ( echo. echo Wichtiger DHCP Hinweis echo ====================== echo Ihre Konfiguration deutete an, das kein DHCP benoetigt wird. Falls echo Sie jedoch einen DSL-Internetzugang besitzen und DHCP irrtuemlich echo deaktivert wurde, kann es nach einem Neustart zu Problemen mit der echo Internetverbindung kommen. Starten sie zur Problembehebung den echo DHCP-Dienst von Hand neu. echo. )echo.echo Not all changes could be performed. To change all issues listedecho on www.ntsvcfg.de please use parameter '/all' or select item "3"!if /I %DHCP_CHANGES%=="YES" ( echo. echo Important DHCP Notice echo ===================== echo Your configuration indicates that DHCP will no longer be required. echo But if you are using a DSL internet connection this choice probably echo might be wrong. If you experiences problems during accessing the echo internet please re-activate the "DHCP Service" manually. echo. )echo ___________________________________________________________________:SW_ALLif /I %SELECT%=="/relan" ( rem startup: auto echo. echo ------------------ echo Re-enabling services ... "%sc%" config LmHosts start= auto "%sc%" config RemoteRegistry start= auto "%sc%" config SamSs start= auto "%sc%" config Winmgmt start= auto if /I "%SYSTEM%"=="2k" ( "%sc%" config RPCSs start= auto "%sc%" config lanmanServer start= auto "%sc%" config seclogon start= auto ) if /I "%SYSTEM%"=="XP" ( rem "%sc%" config SharedAccess start= auto ) rem start re-enabled services echo. echo ------------------ echo [Re]starting services ... echo. "%sc%" query RemoteRegistry | "%find%" /i "1 STOPPED" >NUL if not errorlevel 1 "%net%" start RemoteRegistry "%sc%" query SamSs | "%find%" /i "1 STOPPED" >NUL if not errorlevel 1 "%net%" start SamSs "%sc%" query LmHosts | "%find%" /i "1 STOPPED" >NUL if not errorlevel 1 "%net%" start LmHosts "%sc%" query Winmgmt | "%find%" /i "1 STOPPED" >NUL if not errorlevel 1 "%net%" start Winmgmt if /I "%SYSTEM%"=="2k" ( "%sc%" query LanmanServer | "%find%" /i "1 STOPPED" >NUL if not errorlevel 1 "%net%" start lanmanServer "%sc%" query RPCSs | "%find%" /i "1 STOPPED" >NUL if not errorlevel 1 "%net%" start RPCSs "%sc%" query Seclogon | "%find%" /i "1 STOPPED" >NUL if not errorlevel 1 "%net%" start seclogon ) if /I "%SYSTEM%"=="XP" ( rem "%net%" start SharedAccess ) rem enable SMB port 445 echo. echo ------------------ echo Enabling SMB port 445 ... echo REGEDIT4 > "%SMB_TMP%" echo. >> "%SMB_TMP%" echo [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NetBT\Parameters] >> "%SMB_TMP%" echo "SMBDeviceEnabled"=dword:00000001 >> "%SMB_TMP%" echo. >> "%SMB_TMP%" echo. >> "%SMB_TMP%" "%regedit%" /s "%SMB_TMP%" del /F /Q "%SMB_TMP%" set REBOOT_REQUIRED=yes )rem Creating fingerprint of current service settings...if exist "%FPRINT%" del /F /Q "%FPRINT%"if /I %USE_FPRINT%==YES ( echo. echo Creating fingerprint which will take a few seconds ... "%sc%" query type= service state= all bufsize= 8192 | %FIND% "SERVICE_NAME" > %TEMP%\~svclist.txt for /F "tokens=1*" %%a in (%TEMP%\~svclist.txt) do ( echo %%b >>"%FPRINT%" "%sc%" query "%%b" | %FIND% "STATE" >>"%FPRINT%" "%sc%" qc "%%b" | %FIND% "DISPLAY_NAME" >>"%FPRINT%" "%SC%" qc "%%b" | %FIND% "START_TYPE" >>"%FPRINT%" echo. >> "%FPRINT%" ) del "%TEMP%\~svclist.txt" echo ... done. )goto :END:RESTOREecho ____________________________________________________echo.echo Letzte Aenderungen zuruecknehmen [y/n]?set /P UNDO= Undo last changes [y/n]?if /I "%UNDO%"=="y" ( echo _______________________________________________________________ echo. echo Hinweis: echo ======== echo Moeglicherweise meldet Windows Fehler beim Importieren. echo Ignorieren Sie diese mit Klick auf "OK". echo. echo Windows might probably report an error during importing the echo backups. Just ignore this by clicking the "OK" button! echo _______________________________________________________________ echo Status: echo ------- :RESTORE_EXT if exist "%SVC_BAK%" ( echo Importing services ... echo ["%SVC_BAK%"] "%regedit%" /s "%SVC_BAK%" set action="" ) if exist "%DCOM_BAK%" ( echo Importing DCOM ... echo ["%DCOM_BAK%"] "%regedit%" /s "%DCOM_BAK%" ) if exist "%DCOMP_BAK%" ( echo Importing DCOM-standard protocols ... echo ["%DCOMP_BAK%"] "%regedit%" /s "%DCOMP_BAK%" ) if exist "%SMB_BAK%" ( echo Importing SMB-settings ... echo ["%SMB_BAK%"] echo - Removing SMBDeviceEnabled RegKey ... echo REGEDIT4 > "%USERPROFILE%\smbpatch~.reg" echo. >> "%USERPROFILE%\smbpatch~.reg" echo [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NetBT\Parameters] >> "%USERPROFILE%\smbpatch~.reg" echo "SMBDeviceEnabled"=- >> "%USERPROFILE%\smbpatch~.reg" echo. >> "%USERPROFILE%\smbpatch~.reg" echo. >> "%USERPROFILE%\smbpatch~.reg" "%SystemRoot%\regedit.exe" /s "%USERPROFILE%\smbpatch~.reg" del /F /Q "%USERPROFILE%\smbpatch~.reg" "%regedit%" /s "%SMB_BAK%" ) if exist "%HANDLER1%" ( echo Importing URL_HANDLER AIM ... echo ["%HANDLER1%"] "%regedit%" /s "%HANDLER1%" ) if exist "%HANDLER2%" ( echo Importing URL_HANDLER GOPHER ... echo ["%HANDLER2%"] "%regedit%" /s "%HANDLER2%" ) if exist "%HANDLER3%" ( echo Importing URL_HANDLER TELNET ... echo ["%HANDLER3%"] "%regedit%" /s "%HANDLER3%" ) rem Skipping back to next state if /I "%RESTORE%"=="YES" goto :NO_RESTORE echo Removing RPC Internet key .... echo REGEDIT4 >"%USERPROFILE%\svc_fix.reg" echo. >>"%USERPROFILE%\svc_fix.reg" echo [-HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Rpc\Internet] >>"%USERPROFILE%\svc_fix.reg" echo. >>"%USERPROFILE%\svc_fix.reg" echo. >>"%USERPROFILE%\svc_fix.reg" "%regedit%" /s "%USERPROFILE%\svc_fix.reg" del /F /Q "%USERPROFILE%\svc_fix.reg" rem Creating fingerprint of current service settings... if exist "%FPRINT%" del /F /Q "%FPRINT%" if /I %USE_FPRINT%==YES ( echo. echo Creating fingerprint which will take a few seconds ... "%sc%" query type= service state= all bufsize= 8192 | %FIND% "SERVICE_NAME" > %TEMP%\~svclist.txt for /F "tokens=1*" %%a in (%TEMP%\~svclist.txt) do ( echo %%b >>"%FPRINT%" "%sc%" query "%%b" | %FIND% "STATE" >>"%FPRINT%" "%sc%" qc "%%b" | %FIND% "DISPLAY_NAME" >>"%FPRINT%" "%SC%" qc "%%b" | %FIND% "START_TYPE" >>"%FPRINT%" echo. >> "%FPRINT%" ) del "%TEMP%\~svclist.txt" echo ... done. ) echo. echo _______________________________________________________________ echo. echo *** Zusammenfassung / Result *** echo. echo Die Ruecksicherung wurde ausgefuehrt. Wenn in der oberen Zeile echo keine Statusmeldungen zu sehen sind, existierten keine rueckzu- echo sichernden Dateien. Aktivieren Sie gegebenenfalls NetBios in echo den Eigenschaften der jeweiligen Netzwerkkarte. echo Bitte starten Sie abschliessend Ihren Rechner neu. echo. echo Restore finished. If you don't see any messages in the status echo box above, there were no files to restore. Please reactivate echo NetBios for each NIC you want use with it and reboot afterwards. echo ________________________________________________________________ )goto :END:RESTORE_DEFAULTSecho.echo *** Restore Factory Settings ***echo.echo ______________________________________________________________________________echo.echo Einstellungen vor Erstanwendung des Scripts wiederherstellen (ausser NetBIOS)?set /P UNDO= Restore defaults (before using script, except NetBIOS) [y/n]?if /I "%UNDO%"=="y" ( echo. echo - Restoring original service settings [if exists] ... if exist "%SVC_BAK%.default" ( echo "%SVC_BAK%.default" "%regedit%" /s "%SVC_BAK%.default" ) if exist "%DCOM_BAK%.default" ( echo "%DCOM_BAK%.default" "%regedit%" /s "%DCOM_BAK%.default" ) if exist "%DCOMP_BAK%.default" ( echo "%DCOMP_BAK%.default" "%regedit%" /s "%DCOMP_BAK%.default" ) if exist "%SMB_BAK%.default" ( echo "%SMB_BAK%.default" echo - Removing SMBDeviceEnabled RegKey ... echo REGEDIT4 > "%USERPROFILE%\smbpatch~.reg" echo. >> "%USERPROFILE%\smbpatch~.reg" echo [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NetBT\Parameters] >> "%USERPROFILE%\smbpatch~.reg" echo "SMBDeviceEnabled"=- >> "%USERPROFILE%\smbpatch~.reg" echo. >> "%USERPROFILE%\smbpatch~.reg" echo. >> "%USERPROFILE%\smbpatch~.reg" "%SystemRoot%\regedit.exe" /s "%USERPROFILE%\smbpatch~.reg" del /F /Q "%USERPROFILE%\smbpatch~.reg" "%regedit%" /s "%SMB_BAK%.default" ) if exist "%HANDLER1%.default" ( echo "%HANDLER1%.default" "%regedit%" /s "%HANDLER1%.default" ) if exist "%HANDLER2%.default" ( echo "%HANDLER2%.default" "%regedit%" /s "%HANDLER2%.default" ) if exist "%HANDLER3%.default" ( echo "%HANDLER3%.default" "%regedit%" /s "%HANDLER3%.default" ) echo ... done. echo - Removing RPC Internet key ... echo REGEDIT4 >"%USERPROFILE%\svc_fix.reg" echo. >>"%USERPROFILE%\svc_fix.reg" echo [-HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Rpc\Internet] >>"%USERPROFILE%\svc_fix.reg" echo. >>"%USERPROFILE%\svc_fix.reg" echo. >>"%USERPROFILE%\svc_fix.reg" "%regedit%" /s "%USERPROFILE%\svc_fix.reg" del /F /Q "%USERPROFILE%\svc_fix.reg" echo ... done. )goto UIT:SC_DOWNLOADecho ______________________________________________________________echo.echo Besteht eine aktive Internetverbindung?echo Are you currently connected to the internet?echo.set /P UNDO= Bitte waehlen/Please choose: [y/n]? if /I "%UNDO%"=="y" goto :SC_DOWNLOAD_OKgoto :END:SC_DOWNLOAD_OKif exist "%SYSTEMROOT%\sc.zip" goto :SCEecho Generating FTP-script ...if exist "%USERPROFILE%"\script_sc.ls del /F "%USERPROFILE%\script_sc.ls"echo open 207.46.133.140 >"%USERPROFILE%\script_sc.ls"echo user anonymous anonymous@aol.com >>"%USERPROFILE%\script_sc.ls"echo type binary >>"%USERPROFILE%\script_sc.ls"echo user anonymous anonymous@aol.com >>"%USERPROFILE%\script_sc.ls"echo type binary >>"%USERPROFILE%\script_sc.ls"echo get /reskit/win2000/sc.zip "%SYSTEMROOT%\System32\SC.ZIP" >>"%USERPROFILE%\script_sc.ls"echo quit >>"%USERPROFILE%\script_sc.ls"echo Downloading SC.EXE ...ftp -s:"%USERPROFILE%\script_sc.ls"del /F "%USERPROFILE%\script_sc.ls":SCEif exist "%SYSTEMROOT%\System32\pkunzip.exe" goto KEecho Generating FTP-script ...if exist "%USERPROFILE%"\script_pk.ls del /F "%USERPROFILE%\script_pk.ls"echo open ftp.uni-duesseldorf.de >"%USERPROFILE%\script_pk.ls"echo user anonymous anonymous@aol.com >>"%USERPROFILE%\script_pk.ls"echo type binary >>"%USERPROFILE%\script_pk.ls"echo user anonymous anonymous@aol.com >>"%USERPROFILE%\script_pk.ls"echo type binary >>"%USERPROFILE%\script_pk.ls"echo get /pub/ie/pkunzip.exe "%SYSTEMROOT%\System32\pkunzip.exe" >>"%USERPROFILE%\script_pk.ls"echo quit >>"%USERPROFILE%\script_pk.ls"echo Downloading PKUNZIP.EXE ...ftp -s:"%USERPROFILE%\script_pk.ls"del /F "%USERPROFILE%\script_pk.ls"KEif not exist "%SYSTEMROOT%\System32\sc.zip" ( echo. echo Download fehlgeschlagen. Bitte laden sie sich die Datei SC.ZIP manuell echo herunter und kopieren diese nach %SYSTEMROOT%\. echo. echo Downloading SC.ZIP failed. Please download it manually an copy it to echo %SYSTEMROOT%\. )if not exist "%SYSTEMROOT%\System32\pkunzip.exe" ( echo. echo Die Datei PKUNZIP.EXE konnte nicht gefunden werden. Diese wird zum echo Entpacken des Archivs SC.ZIP benoetigt! echo. echo File PKUNZIP.EXE not found. It is needed to decompress the archive SC.EXE. )if exist "%SYSTEMROOT%\System32\SC.ZIP" ( if exist "%SYSTEMROOT%\System32\pkunzip.exe" ( "%SYSTEMROOT%\System32\pkunzip.exe" -e "%SYSTEMROOT%\System32\sc.zip" sc.exe ) )move /Y sc.exe "%SYSTEMROOT%\System32\"echo.echo Skript wird neu gestartet ...echo Restarting script ...goto :START:FIXecho.echo -= svc2kxp.cmd taskplaner fix =-echo.echo.echo Druecken Sie "Y", um das Problem mit dem Taskplaner ("falscher Parameter")echo unter Windows XP zu beheben.echo.echo Press "Y", if you want fix issue "scheduler doesn't start under Windows XPecho after running script v2.0 - v2.1build0".echo.set /P UNDO= Fix problem [y/n]?if /I "%UNDO%"=="y" ( echo REGEDIT4 >"%USERPROFILE%\svc_fix.reg" echo. >>"%USERPROFILE%\svc_fix.reg" echo [-HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Rpc\Internet] >>"%USERPROFILE%\svc_fix.reg" echo. >>"%USERPROFILE%\svc_fix.reg" echo. >>"%USERPROFILE%\svc_fix.reg" "%regedit%" /s "%USERPROFILE%\svc_fix.reg" del /F /Q "%USERPROFILE%\svc_fix.reg" echo ______________________________________ echo OK. Bitte starten Sie den Rechner neu und kontrollieren Sie erneut, echo ob hierdurch Ports geoeffnet wurden. echo. echo Done. Please reboot and check again for open ports ...! )rem Creating fingerprint of current service settings...if exist "%FPRINT%" del /F /Q "%FPRINT%"goto quitif /I %USE_FPRINT%==YES ( echo. echo Creating fingerprint which will take a few seconds ... "%sc%" query type= service state= all bufsize= 8192 | %FIND% "SERVICE_NAME" > %TEMP%\~svclist.txt for /F "tokens=1*" %%a in (%TEMP%\~svclist.txt) do ( echo %%b >>"%FPRINT%" "%sc%" query "%%b" | %FIND% "STATE" >>"%FPRINT%" "%sc%" qc "%%b" | %FIND% "DISPLAY_NAME" >>"%FPRINT%" "%SC%" qc "%%b" | %FIND% "START_TYPE" >>"%FPRINT%" echo. >> "%FPRINT%" ) del "%TEMP%\~svclist.txt" echo ... done. )goto UITrem **** Additional Feature List ****:MORE_OPTIONSclsecho ______________________________________________________________________________echo.echo *** Weitere Optionen / More Options Menue ***echo =====================================echo.if /I "%SVC_MOD%"=="YES" ( echo [E]...Zeigt eine Liste an, welche Dienste seit der letzten Anwendung echo von svc2kxp.cmd veraendert wurden. echo. echo Shows a list with modified services since last use of scv2kxp.cmd echo. )echo [G]...Generiert einen neuen Fingerprint, um Veraenderungen beiecho Diensten zu erfassenecho.echo Generates a new fingerprint to correctly detect changes ofecho servicesecho.echo [S]...Sichern der aktuellen Dienstekonfiguration.echo Saving current NT service configuration (auto/demand/disabled).echo.echo ______________________________________________________________________________echo.if /I "%SVC_MOD%"=="NO" set /P CHS= Bitte waehlen Sie/Please choose: [G], [S], ack or [Q]uit?if /I "%SVC_MOD%"=="YES" set /P CHS= Bitte waehlen Sie/Please choose: [E], [G], [S], ack or [Q]uit?if /I "%SVC_MOD%"=="YES" if /I "%CHS%"=="E" GOTO :EVALUATE_SERVICESif /I "%CHS%"=="G" GOTO :CREATING_NEW_FINGERPRINTif /I "%CHS%"=="B" ( CLS GOTO :START )if /I "%CHS%"=="S" GOTO :SAVE_SVC_SETTINGSif /I "%CHS%"=="Q" GOTO UITGOTO :MORE_OPTIONS:EVALUATE_SERVICESclsecho ______________________________________________________________________________echo.echo *** Evaluate Services Menue ***echo."%FC%" /N "%FPRINT%" "%USERPROFILE%\ntsvcfg\svc2cmp.sav"echo ______________________________________________________________________________echo.set /P CHS= Bitte waehlen Sie/Please choose: ack, pdate or [Q]uit?if /I "%CHS%"=="B" GOTO :MORE_OPTIONSif /I "%CHS%"=="U" GOTO :CREATING_NEW_FINGERPRINTif /I "%CHS%"=="Q" GOTO UITGOTO :MORE_OPTIONS:SAVE_SVC_SETTINGSclsecho ______________________________________________________________________________echo.echo *** Manage current services configurations menue ***echo --------------------------------------------echo.echo Soll die aktuelle Dienstekonfiguration gesichert werden?echo.set /P CHS= Should the current service configuration saved (y/n)?if /I "%CHS%"=="N" GOTO :MORE_OPTIONSif /I "%CHS%"=="Y" ( echo Saving current services settings to: echo. echo - %SVC_SAV% "%regedit%" /e "%SVC_SAV%" HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services echo. echo ... Done! echo ______________________________________________________________________________ echo. echo Beliebige Taste druecken, um fortzufahren. Hit any key to return. pause>NUL )if /I "%CHS%"=="Q" GOTO UITgoto :MORE_OPTIONSpause >NULgoto :MORE_OPTIONS:CREATING_NEW_FINGERPRINTclsecho ______________________________________________________________________________echo.echo *** Creating new fingerprint menue ***echo ------------------------------echo.set /P CHS= Create new fingerprint [Y/N]?if /I "%CHS%"=="Y" ( if exist "%FPRINT%" del /F /Q "%FPRINT%" echo Creating new fingerprint which will take a few seconds ... "%sc%" query type= service state= all bufsize= 8192 | %FIND% "SERVICE_NAME" > %TEMP%\~svclist.txt for /F "tokens=1*" %%a in (%TEMP%\~svclist.txt) do ( echo %%b >>"%FPRINT%" "%sc%" query "%%b" | %FIND% "STATE" >>"%FPRINT%" "%sc%" qc "%%b" | %FIND% "DISPLAY_NAME" >>"%FPRINT%" "%SC%" qc "%%b" | %FIND% "START_TYPE" >>"%FPRINT%" echo. >> "%FPRINT%" ) del "%TEMP%\~svclist.txt" echo ... done. echo ______________________________________________________________________________ echo. echo [Press any key to continue] set CHK_SVC=YES PAUSE >NUL )clsGOTO :MORE_OPTIONS:XPSYSRESTOREREM Creating A System Restore Point // Source Code: MS Technet Scriptcenter echo. echo # Creating System Restore Point [if XP SysRestore is enabled] ... if exist "%srctmp%" del /F /Q "%srctmp%" echo CONST DEVICE_DRIVER_INSTALL = 10 >"%srctmp%" echo CONST BEGIN_SYSTEM_CHANGE = 100 >>"%srctmp%" echo.>>"%srctmp%" echo strComputer = ".">>"%srctmp%" echo Set objWMIService = GetObject("winmgmts:" _ >>"%srctmp%" echo ^& "{impersonationLevel=impersonate}!\\" ^& strComputer ^& "\root\default")>>"%srctmp%" echo.>>"%srctmp%" echo Set objItem = objWMIService.Get("SystemRestore")>>"%srctmp%" echo errResults = objItem.CreateRestorePoint _ >>"%srctmp%" echo ("svc2kxp.cmd created restore point", DEVICE_DRIVER_INSTALL, BEGIN_SYSTEM_CHANGE)>>"%srctmp%" "%srctmp%" del /F /Q "%srctmp%" echo.goto :XPSYSRESTORE_DONE:ENDif "%REBOOT_REQUIRED%"=="yes" ( echo. echo ______________________________________________________ echo. echo *** Zusammenfassung / Result *** echo. if /I %SELECT%=="/all" echo Es wurden alle gewuenschten Aenderungen durchgefuehrt. if /I %SELECT%=="/std" echo Einige Dienste blieben unveraendert. if /I %SELECT%=="/relan" echo Notwendige LAN-Einstellungen wurden aktiviert. if /I %DHCP_CHANGES%=="YES" ( echo. echo Wichtiger DHCP Hinweis echo ====================== echo Ihre Konfiguration deutete an, das kein DHCP benoetigt wird. Falls echo Sie jedoch einen DSL-Internetzugang besitzen und DHCP irrtuemlich echo deaktivert wurde, kann es nach einem Neustart zu Problemen mit der echo Internetverbindung kommen. Starten sie zur Problembehebung den echo DHCP-Dienst von Hand neu. echo. ) echo. echo Bitte starten Sie abschliessend Ihren Rechner neu. echo. if /I %SELECT%=="/all" echo All changes applied successfully. if /I %SELECT%=="/std" echo Some services stay unchanged. if /I %SELECT%=="/relan" echo LAN settings reactivated. if /I %DHCP_CHANGES%=="YES" ( echo. echo Important DHCP Notice echo ===================== echo Your configuration indicates that DHCP will no longer be required. echo But if you are using a DSL internet connection this choice probably echo might be wrong. If you experiences problems during accessing the echo internet please re-activate the "DHCP Service" manually. echo. ) echo Please reboot. echo ______________________________________________________ )UITecho ________________________________________________________echo.echo Weitere Informationen: http://www.ntsvcfg.deecho For more informations: http://www.ntsvcfg.de/ntsvcfg_engecho ________________________________________________________echo [Taste zum Beenden druecken] [Press any key to quit]echo ------------------------------------------------------echo.if /I "%1"=="" pause>NULUIT_EXTendlocalif exist "%USERPROFILE%\ntsvcfg\svc2cmp.sav" del /F /Q "%USERPROFILE%\ntsvcfg\svc2cmp.sav"echo.
