无忧启动论坛

标题: 求助：关于无PXE芯片机器实现PXE启动[已解决] [打印本页]

作者: leadbuy 时间: 2008-6-25 15:03
标题: 求助：关于无PXE芯片机器实现PXE启动[已解决]
各位朋友大家好。我在论坛上上看到了xieliuyun朋友发的帖子(http://bbs.wwwfox.net/viewthread.php?tid=87439&extra=page%3D2&page=1)，很感兴趣。可是本人对于pxe启动PE一点也不懂。虽然在论坛上搜索了相关帖子并认真看了。但还是一头雾水。

我现在碰到这样一个问题。我想用Etherboot启动无PXE启动芯片的电脑到老毛桃的PE系统下。我该怎么做。我是用Climbing大虾提供的文件试验的。他的帖子(http://bbs.wwwfox.net/viewthread.php?tid=106538&highlight=PXE%C6%F4%B6%AF)。用帖子里提供的工具能够成功启动带有PXE启动芯片的电脑到老毛桃的PE下。如果先把电脑通过软盘启动到dos下，然后用Etherboot生成的rom引导(假设网卡没有启动芯片)，在中途停止了。下面我会提供详细的日志。我是个初学者，对PXE启动一窍不通，所以请大家包涵。因为我对Linux一点也不会，所以我是先用软盘启动到dos下，然后手动执行Etherboot生成的ROM(.com文件)。我知道vmware虚拟机本身是可以从网卡启动的。假设vmware不支持从网卡启动，我想从dos下，通过Etherboot的rom启动到PE系统下，我该怎么做。先谢谢各位朋友了。如果哪位朋友有现成的文件提供，那就更好了。我可以下载下来，慢慢学习学习。不管是用何种方式，只要能让无pxe启动芯片的电脑通过网卡启动到PE下就行。

TFTP日志：
在虚拟机里，通过软盘启动到dos下，然后执行用Etherboot生成的rom后，下载完ntldr文件就不继续了

Rcvd DHCP Discover Msg for IP 0.0.0.0, Mac 00:0C:29:A4:0B:F2 [25/06 14:23:14.468]
DHCP: proposed address 192.168.1.105 [25/06 14:23:16.822]
Rcvd DHCP Rqst Msg for IP 0.0.0.0, Mac 00:0C:29:A4:0B:F2 [25/06 14:23:19.465]
Previously allocated address 192.168.1.105 acked [25/06 14:23:20.988]
Connection received from 192.168.1.105 on port 2001 [25/06 14:23:21.108]
Read request for file <startrom.0>. Mode octet [25/06 14:23:21.128]
OACK: <blksize=1432,> [25/06 14:23:21.128]
Using local port 3455 [25/06 14:23:21.128]
Ack block 3 ignored (received twice) [25/06 14:23:25.184]
<startrom.0>: sent 18 blks, 24466 bytes in 4 s. 0 blk resent [25/06 14:23:25.344]
Connection received from 192.168.1.105 on port 2002 [25/06 14:23:25.454]
Read request for file <NTLDR>. Mode octet [25/06 14:23:29.220]
OACK: <blksize=1432,> [25/06 14:23:29.220]
Using local port 3456 [25/06 14:23:29.220]
<NTLDR>: sent 194 blks, 277504 bytes in 6 s. 0 blk resent [25/06 14:23:31.493]

直接使用vmware的网卡启动，能成功进入PE

Rcvd DHCP Discover Msg for IP 0.0.0.0, Mac 00:0C:29:A4:0B:F2 [25/06 14:25:27.369]
DHCP: proposed address 192.168.1.105 [25/06 14:25:28.872]
Rcvd DHCP Rqst Msg for IP 0.0.0.0, Mac 00:0C:29:A4:0B:F2 [25/06 14:25:30.354]
Previously allocated address 192.168.1.105 acked [25/06 14:25:31.856]
Connection received from 192.168.1.105 on port 2070 [25/06 14:25:31.876]
Read request for file <startrom.0>. Mode octet [25/06 14:25:31.886]
OACK: <blksize=1456,> [25/06 14:25:31.886]
Using local port 3527 [25/06 14:25:31.886]
<startrom.0>: sent 17 blks, 24466 bytes in 0 s. 0 blk resent [25/06 14:25:31.936]
Connection received from 192.168.1.105 on port 2071 [25/06 14:25:32.036]
Read request for file <NTLDR>. Mode octet [25/06 14:25:32.036]
OACK: <blksize=1456,> [25/06 14:25:32.036]
Using local port 3528 [25/06 14:25:32.036]
<NTLDR>: sent 191 blks, 277504 bytes in 0 s. 0 blk resent [25/06 14:25:32.266]
Connection received from 192.168.1.105 on port 51945 [25/06 14:25:34.079]
Read request for file <BOOTFONT.BIN>. Mode octet [25/06 14:25:34.089]
File <BOOTFONT.BIN> : error 2 in system call CreateFile 系统找不到指定的文件。 [25/06 14:25:34.089]
Connection received from 192.168.1.105 on port 51946 [25/06 14:25:34.099]
Read request for file <ntdetect.com>. Mode octet [25/06 14:25:34.099]
OACK: <blksize=1432,tsize=47772,> [25/06 14:25:34.099]
Using local port 3530 [25/06 14:25:34.099]
<ntdetect.com>: sent 34 blks, 47772 bytes in 0 s. 0 blk resent [25/06 14:25:34.259]
Connection received from 192.168.1.105 on port 51947 [25/06 14:25:34.440]
Read request for file <winnt.sif>. Mode octet [25/06 14:25:34.440]
OACK: <blksize=1432,tsize=247,> [25/06 14:25:34.450]
Using local port 3531 [25/06 14:25:34.450]
Connection received from 192.168.1.105 on port 51948 [25/06 14:25:34.490]
Read request for file <WINPE.ISO>. Mode octet [25/06 14:25:34.510]
<winnt.sif>: sent 1 blk, 247 bytes in 0 s. 0 blk resent [25/06 14:25:34.520]
OACK: <blksize=1432,tsize=138252288,> [25/06 14:25:34.570]
Using local port 3532 [25/06 14:25:34.570]
<WINPE.ISO>: sent 96545 blks, 138252288 bytes in 216 s. 0 blk resent [25/06 14:29:10.711]

[ 本帖最后由 leadbuy 于 2008-6-25 07:48 PM 编辑 ]

作者: 世界第一等 时间: 2008-10-4 14:42
楼上怎么解决的能说一下吗?

欢迎光临无忧启动论坛 (http://bbs.wuyou.net/)