无忧启动论坛

标题: 加载驱动的问题,急救 [打印本页]

作者: shnjshnj 时间: 2009-4-9 15:45
标题: 加载驱动的问题,急救
lsi_sas.inf中的文件 lsi_sas.sys这是驱动程序
;
; LSI_SAS.INF - version S2003.2 (Windows Server 2003)
;
; This is the INF file for Windows Server 2003 for the LSI_SAS based
; PCI MPT environment (Serial Attached SCSI devices)
;
; ********************************************************************
;                                                                   *
; Copyright 2007 LSI Corporation, Inc. All rights reserved.       *
;                                                                   *
; This file is property of LSI Corporation, Inc. and is licensed *
; for use as is.  The receipt of or possession of this file does *
; convey any rights to modify its contents, in whole, or in part,  *
; without the specific written consent of LSI Corporation.       *
;                                                                   *
; ********************************************************************
[version]
signature="$Windows NT$"
Class=SCSIAdapter
ClassGUID={4D36E97B-E325-11CE-BFC1-08002BE10318}
Provider=%LSI%
DriverVer=01/30/2009,1.30.02.00
CatalogFile.ntx86=s2k332.cat
[DestinationDirs]
DefaultDestDir = 12 ; DIRID_DRIVERS
[SourceDisksFiles.x86]
lsi_sas.sys = 1
lsinodrv.inf = 1
[SourceDisksNames]
1 = %DiskDesc%,,
[Manufacturer]
%LSI%=LSI
%DELL%=DELL
[LSI]
%DevDesc8% = LSI_SAS_Inst, PCI\VEN_1000&DEV_0050
%DevDesc9% = LSI_SAS_Inst, PCI\VEN_1000&DEV_0054
%DevDesc10% = LSI_SAS_Inst, PCI\VEN_1000&DEV_0058
%DevDesc11% = LSI_SAS_Inst, PCI\VEN_1000&DEV_0056
%DevDesc12% = LSI_SAS_Inst, PCI\VEN_1000&DEV_0062
[DELL]
%DevDescD1% = LSI_SAS_Dell_Inst, PCI\VEN_1000&DEV_0054&SUBSYS_1F041028
%DevDescD3% = LSI_SAS_Dell_Inst, PCI\VEN_1000&DEV_0054&SUBSYS_1F061028
%DevDescD4% = LSI_SAS_Dell_Inst, PCI\VEN_1000&DEV_0054&SUBSYS_1F071028
%DevDescD5% = LSI_SAS_Dell_Inst, PCI\VEN_1000&DEV_0054&SUBSYS_1F081028
%DevDescD6% = LSI_SAS_Dell_Inst, PCI\VEN_1000&DEV_0054&SUBSYS_1F091028
%DevDescD7% = LSI_SAS_Dell_Inst, PCI\VEN_1000&DEV_0058&SUBSYS_1F0E1028
%DevDescD8% = LSI_SAS_Dell_Inst, PCI\VEN_1000&DEV_0058&SUBSYS_1F0F1028
%DevDescD9% = LSI_SAS_Dell_Inst, PCI\VEN_1000&DEV_0058&SUBSYS_1F101028
%DevDescD10% = LSI_SAS_Dell_Inst, PCI\VEN_1000&DEV_0058&SUBSYS_021D1028
[ControlFlags]
ExcludeFromSelect = *
[LSI_SAS_Inst]
CopyFiles = LSI_SAS_CopyFiles
AddReg = LSI_SAS_AddReg
CopyINF = lsinodrv.inf
[LSI_SAS_Inst.HW]
AddReg = Shutdown_addreg
DelReg = LegacyScsiportValues
[LSI_SAS_Inst.Services]
AddService = LSI_SAS, %SPSVCINST_ASSOCSERVICE%, LSI_SAS_Service_Inst, Miniport_EventLog_Inst
[LSI_SAS_AddReg]
HKLM,SYSTEM\CurrentControlSet\Services\Lsi_sas\Parameters\Device,DriverParameter,0x00000002,"PlaceHolder=0;"
HKLM,SYSTEM\CurrentControlSet\Services\Lsi_sas\Parameters\Device,MaximumSGList,0x00010001,0xFF
HKLM,SYSTEM\CurrentControlSet\Services\Lsi_sas\Parameters\Device,NumberOfRequests,0x00010001,0xFF
[LSI_SAS_Dell_Inst]
CopyFiles = LSI_SAS_CopyFiles
AddReg = LSI_SAS_Dell_AddReg
[LSI_SAS_Dell_Inst.HW]
AddReg = Shutdown_addreg
DelReg = LegacyScsiportValues
[LSI_SAS_Dell_Inst.Services]
AddService = LSI_SAS, %SPSVCINST_ASSOCSERVICE%, LSI_SAS_Service_Inst, Miniport_EventLog_Inst
[LSI_SAS_Dell_AddReg]
HKLM,SYSTEM\CurrentControlSet\Services\Lsi_sas\Parameters\Device,DriverParameter,0x00000002,"PlaceHolder=0;"
HKLM,SYSTEM\CurrentControlSet\Services\Disk,TimeOutValue,0x00010001,0x000000A0
HKLM,SYSTEM\CurrentControlSet\Services\Lsi_sas\Parameters\Device,MaximumSGList,0x00010001,0xFF
HKLM,SYSTEM\CurrentControlSet\Services\Lsi_sas\Parameters\Device,NumberOfRequests,0x00010001,0xFF
[LSI_SAS_Service_Inst]
ServiceType = %SERVICE_KERNEL_DRIVER%
StartType    = %SERVICE_BOOT_START%
ErrorControl = %SERVICE_ERROR_NORMAL%
ServiceBinary  = %12%\lsi_sas.sys
LoadOrderGroup = SCSI Miniport
AddReg       = pnpsafe_pci_addreg
AddReg       = bus_type_sas
[LSI_SAS_CopyFiles]
lsi_sas.sys,,,1
[Shutdown_addreg]
HKR,"ScsiPort","NeedsSystemShutdownNotification",0x00010001,1
[LegacyScsiportValues]
HKR,Scsiport,BusNumber
HKR,Scsiport,LegacyInterfaceType
HKR,Scsiport,SlotNumber
[pnpsafe_pci_addreg]
HKR, "Parameters\PnpInterface", "5", 0x00010001, 0x00000001
[bus_type_sas]
HKR, "Parameters", "BusType", 0x00010001, 0x0000000A
[Miniport_EventLog_Inst]
AddReg = Miniport_EventLog_AddReg
[Miniport_EventLog_AddReg]
HKR,,EventMessageFile,%REG_EXPAND_SZ%,"%%SystemRoot%%\System32\IoLogMsg.dll"
HKR,,TypesSupported,%REG_DWORD%,7
[Strings]
LSI = "LSI Corporation"
DELL = "Dell Inc."
DiskDesc = "LSI PCI Fusion-MPT SAS Driver Install Disk (StorPort)"
DevDesc8 = "LSI Adapter, SAS 3000 series, 4-port with 1064 -StorPort"
DevDesc9 = "LSI Adapter, SAS 3000 series, 8-port with 1068 -StorPort"
DevDesc10 = "LSI Adapter, SAS 3000 series, 8-port with 1068E -StorPort"
DevDesc11 = "LSI Adapter, SAS 3000 series, 4-port with 1064E -StorPort"
DevDesc12 = "LSI Adapter, SAS RAID-on-Chip, 8-port with 1078 -StorPort"
DevDescD1 = "Dell SAS 5/E Adapter Controller"
DevDescD3 = "Dell SAS 5/i Integrated Controller"
DevDescD4 = "Dell SAS 5/iR Integrated Controller"
DevDescD5 = "Dell SAS 5/iR Integrated Controller"
DevDescD6 = "Dell SAS 5/iR Adapter Controller"
DevDescD7 = "Dell SAS 6/iR Adapter Controller"
DevDescD8 = "Dell SAS 6/iR Integrated Blades Controller"
DevDescD9 = "Dell SAS 6/iR Integrated Controller"
DevDescD10 = "Dell SAS 6/iR Integrated Workstation Controller"
;*******************************************
;Handy macro substitutions (non-localizable)
SPSVCINST_ASSOCSERVICE = 0x00000002
SERVICE_KERNEL_DRIVER  = 1
SERVICE_BOOT_START    = 0
SERVICE_ERROR_NORMAL = 1
REG_EXPAND_SZ       = 0x00020000
REG_DWORD             = 0x00010001

看了下网上资料,把 lsi_sas.sys放到drivers中,
在[SCSI]里面增加
XXXSATA = "XXX SATA CONTROLLER"
然后在[SourceDisksFiles]里面添加
XXXSATA.sys = 1,,,,,,4_,4,1,,,1,4
然后在[SCSI.Load]里面增加
XXXSATA = XXXSATA.sys,4
在[HardwareIdsDatabase]里面增加
PCI\VEN_105A&DEV_3373 = "XXXSATA"  问题就在这,看上面驱动哪个是我应加进去的(那么多PCI.....),我试过把PCI全部加进去,可就会卡在那,不往下走了  请大家重点帮我看看这个,我不明白之处
已搞了二天了,还是不行,坏了6张盘了,请大家一定要帮帮忙,狂闷
我的QQ378629766,如果在这写的烦,也请直接加我QQ,万分感觉.另外我拍了下安装好系统的信息,没发现上面那些PCI....相同的,是不是和操作系统认出的不一样呀?

raid_1.JPG (79.48 KB, 下载次数: 73)

是装完系统后拍的

raid_2.JPG (89.97 KB, 下载次数: 69)

是装完系统后拍的

raid_3.JPG (87.08 KB, 下载次数: 71)

是装完系统后拍的

raid_4.JPG (89.94 KB, 下载次数: 71)

是装完系统后拍的

作者: dvd008 时间: 2009-4-9 16:00
好像驱动不对，应该是 0060的，但是你那里没有，只有58和62的

把你的驱动包发上来或放网盘上，驱动应该很小的，要全面的，包括sys，inf，txtsetup.oem
关键文件的

作者: dvd008 时间: 2009-4-9 16:10
再有，你那个显示是ibm的，看看ibm的驱动
dell有 0060的，不过没有你的型号，
只是驱动不对，没什么
按照你的型号，去找驱动

欢迎光临无忧启动论坛 (http://bbs.wuyou.net/)