无忧启动论坛
标题:
U盘量产失败 怎么办啊??
[打印本页]
作者:
201094048344
时间:
2010-10-10 12:01
标题:
U盘量产失败 怎么办啊??
量产前的
---------------- Device 1------------------
MP Tool Version :
INI File Name :
Format Date :
Flash Part No : Toshiba 43nm D2 MLC
CE-0, Flash ID=98-D5-94-32-76-54-0B
CE-1, Flash ID=98-D5-94-32-76-54-0B
VID : 0x0930
PID : 0x6544
Vendor Name = Kingston
Product Name = DataTraveler 2.0
Serial Number = 0019B92764CCC97143AF09B5
Volume Label = NO NAME
F/W Version : 0xB0
ISP Version : V1.27
Flash R/W Timing : 25ns
Channel : Byte Mode
Homogeneous Mode : Off
HID Function : Disable
Planes(F/W) : 2
Pages/Block : 128 pages
Max Current : 100 mA
Total Blocks : 4168
Bad Blocks : 7
Capacity : 7807888 Sectors, 3997638656 Bytes
3903944 KBytes, 3812.45 MBytes, 3.72 GBytes
量产后的
Device 1:0xB0
MP Version:2.162
INI_File_Name:
Random delay 0 msec
[2090 CM]
--- Download MP ISP ---
CE-0, Flash ID=98-D5-94-32-76-54-0B-00
CE-1, Flash ID=98-D5-94-32-76-54-0B-00
Searching SORTING BOARD table ...
--> Not Found
Found BACKUP Table (000000BB-0001)
Found BACKUP Table (0000013B-0002)
Original Bad Block - 0:0x00E6
Original Bad Block - 0:0x00E8
Original Bad Block - 0:0x0233
Original Bad Block - 1:0x051F
Original Bad Block - 1:0x06F1
Original Bad Block - 1:0x0739
Original Bad Block - 1:0x0777
Defect Table shows 4161 Good blocks, 7 Bad blocks
SafeErase (0,2084)
Erase failed Block - 0:0:0x00E6
Erase failed Block - 0:0:0x00E8
Erase failed Block - 0:0:0x0233
---> Max Bad of Plane (2,1)
SafeErase (1,2084)
Erase failed Block - 1:0:0x051F
Erase failed Block - 1:0:0x06F1
Erase failed Block - 1:0:0x0739
Erase failed Block - 1:0:0x0777
---> Max Bad of Plane (0,4)
---> Max BAD/DIE = 4
Total good blocks after SCAN: 4161 / 4168, Bad block=7
RootSector=0x3D3D,Sec/Cluster=8, SuperPage=32 ---> Alignment=27
Boot Block=0x0001,0x0002
==> Homogeneous ON
Lun0(7987120), Lun1(329808), Public=7987120, Secure=0, CDROM=329808
Special FE Config = 56-0B-00
(MaxLBA: 007EE800 < 007DA800)
Lun0(7905200), Lun1(329808), Public=7905200, Secure=0, CDROM=329808
Public,Secure,CDROM = 7905200,0,329808
SN=0025869B489BF0A0A98514DB
--- Download ISP Code:C:\TDDOWNLOAD\MP_VER2162_ALL\ISP_CODE\6690_B1-CM_20081204_V302_29E2.BIN---
--- ISP Code installed.
--- Download ISP Code:C:\TDDOWNLOAD\MP_VER2162_ALL\ISP_CODE\6690_B1-CM_20081204_V302_29E2.BIN---
--- ISP Code installed.
=== CM Preformat Done ===
Low Level Format DONE
Store INI/ERROR MSG to Block-0x0001:79.
CDROM image:D:\LUYAFEI.ISO
Total=8235008,CDROM=329808, PublicArea=7905072, SecureArea=0
Create SECURE(CDROM=1,Public=3859 MB,Secure=0 MB)
Write LBA(0x00789FB0,128) Fail !
### Err: SECURE failed(16413816).
U盘现在识别不到安装要驱动
0字节 RAW文件
作者:
201094048344
时间:
2010-10-10 12:03
有什么办法可以补救啊?????
作者:
201094048344
时间:
2010-10-10 12:19
我把U盘还原了 请问这个U盘能量产么??
哪位大哥帮帮我啊???
设备名称: [E:]USB Mass Storage Device(Kingston DataTraveler 2.0 USB Device)
PNP设备ID: VID = 0930 PID = 6544
设备序列号: 0025869B489BF0A0AFA514DC
设备版本: 1.00
设备类型: 标准USB设备 - USB2.0高速
芯片制造商: Toshiba(东芝)
芯片型号: SK6211BB/TC58NC6686G1F
产品制造商: Kingston
产品型号: DataTraveler 2.0
cardinfo
---------------- Device 1------------------
MP Tool Version :
INI File Name :
Format Date :
Flash Part No : Toshiba 43nm D2 MLC
CE-0, Flash ID=98-D5-94-32-76-54-0B
CE-1, Flash ID=98-D5-94-32-76-54-0B
VID : 0x0930
PID : 0x6544
Vendor Name = Kingston
Product Name = DataTraveler 2.0
Serial Number = 0019B92764CCC97143AF09B5
Volume Label = NO NAME
F/W Version : 0xB0
ISP Version : V1.27
Flash R/W Timing : 25ns
Channel : Byte Mode
Homogeneous Mode : Off
HID Function : Disable
Planes(F/W) : 2
Pages/Block : 128 pages
Max Current : 100 mA
Total Blocks : 4168
Bad Blocks : 7
Capacity : 7807888 Sectors, 3997638656 Bytes
3903944 KBytes, 3812.45 MBytes, 3.72 GBytes
作者:
jjsfm
时间:
2010-10-10 15:09
这个盘不能量产CD-ROM。
作者:
201094048344
时间:
2010-10-10 16:47
悲剧啊!! 怎么不能量产啊??
我的U盘还原后怎么容量变大了啊? 原来是3.72G 现在是3.92G了
作者:
2010xiaodmeon
时间:
2010-10-16 00:47
不是变大了,是量产工具将U盘的容量虚拟大了,其实你U盘真正的容量还是那么大,不信楼主可以尝试一下
欢迎光临 无忧启动论坛 (http://bbs.wuyou.net/)
Powered by Discuz! X3.3