无忧启动论坛

标题: 请帮我看看（引导代码）为什么引导不了ISO和IMG [打印本页]

作者: siemens 时间: 2011-3-11 19:15
标题: 请帮我看看（引导代码）为什么引导不了ISO和IMG
请帮我看看为什么引导不了ISO和IMG，还有BIN，选PE、DOS等都是没反正，哪里错了，应该改成怎样的，谢谢

LINUX能进

WINPE03.ISO在U盘的根目录，DOS和USB2.0驱动（plpbt.bin）在IMG目录里面。

以下为我修改出来的引导代码，：
--------------------------
PROMPT 0
TIMEOUT 90
DEFAULT /boot/vesamenu.c32
MENU BACKGROUND /boot/slax.jpg
MENU TITLE Slax-Remix-v07
MENU WIDTH 28
MENU MARGIN 2
MENU ROWS 9
MENU HELPMSGROW 17
MENU TIMEOUTROW 28
MENU TABMSGROW 15
MENU CMDLINEROW 23
MENU HSHIFT 4
MENU VSHIFT 5
menu color screen 37;40    #00000000 #00000000 none
menu color border 30;44    #00000000 #00000000 none
menu color title 1;36;44 #ffa0ffa0 #30003f07 none
menu color unsel 37;44    #ff27d087 #00000000 none
menu color hotkey 1;37;44 #ff8037b7 #00000000 none
menu color sel  7;37;40 #ffffff70 #003f7fbf none
menu color hotsel 1;7;37;40  #ffaf67f7 #003f7fbf none
menu color scrollbar 30;44    #00000000 #00000000 none
menu color tabmsg 31;40    #ffffff70 #00000000 none
menu color cmdmark 1;36;40 #ffff0000 #00000000 none
menu color cmdline 37;40    #ffffffff #ff000000 none
menu color pwdborder 30;47    #ffff0000 #00000000 std
menu color pwdheader 31;47    #ffff0000 #00000000 std
menu color pwdentry 30;47    #ffff0000 #00000000 std
menu color timeout_msg 37;40    #ff809aef #00000000 none
menu color timeout 1;37;40 #ffb72f9f #00000000 none
menu color help  37;40    #ffa0ffa0 #00000000 none
menu color msg07 37;40    #90ffffff #00000000 std

LABEL WINPE2003
LINUX memdisk
INITRD /WINPE03.ISO
APPEND iso raw

LABEL MAX DOS
LINUX memdisk
INITRD /img/MaxDOS.IMG
APPEND IMG raw

LABEL fresh
MENU LABEL Always Fresh
KERNEL /boot/vmlinuz
APPEND initrd=/boot/initrd.lz ramdisk_size=6666 root=/dev/ram0 rw autoexec=xconf;telinit~4
TEXT HELP
Normally Slax saves all changes
to the /slax/changes/ directory
on the boot media (if writable)
and restores them next time.
Use this option to start fresh
system, no changes are neither
read nor written anywhere
ENDTEXT

LABEL cp2ram
MENU LABEL Copy To RAM
KERNEL /boot/vmlinuz
APPEND initrd=/boot/initrd.lz ramdisk_size=6666 root=/dev/ram0 rw vga=791 splash=silent quiet copy2ram autoexec=xconf;telinit~4
TEXT HELP
Run Slax the same like above,
but first copy all data to RAM
to get huge speed (needs >300MB)
ENDTEXT

LABEL USB2.0
LINUX memdisk
INITRD /img/plpbt.bin
APPEND bin raw

LABEL slax
MENU LABEL Text mode
KERNEL /boot/vmlinuz
APPEND initrd=/boot/initrd.lz ramdisk_size=6666 root=/dev/ram0 rw changes=/slax/
TEXT HELP
Run Slax in textmode and start
command prompt only
ENDTEXT

LABEL pxe
MENU LABEL Slax as PXE server
KERNEL /boot/vmlinuz
APPEND initrd=/boot/initrd.lz ramdisk_size=6666 root=/dev/ram0 rw autoexec=/boot/pxelinux.cfg/start;/boot/pxelinux.cfg/web/start;xconf;telinit~4
TEXT HELP
Run Slax as usual, but also
initialize PXE server.
This will allow you to boot Slax
on other computers over network
ENDTEXT

MENU SEPARATOR
LABEL memtest86
MENU LABEL Run Memtest utility
KERNEL /boot/mt86p
TEXT HELP
Don't start Slax at all, but
rather run the MemTest utility
to diagnose your computer's RAM
for possible errors
ENDTEXT

[ 本帖最后由 siemens 于 2011-3-11 19:20 编辑 ]

作者: 2010guren777 时间: 2011-3-11 20:14
   LABEL runISO
      MENU LABEL  -- 加载 ISO 镜像
      LINUX memdisk
      INITRD /imgs/.iso
      APPEND iso raw

   LABEL IMA
      MENU LABEL  -- 加载 IMA 镜像
      kernel /boot/ISOLINUX/memdisk
      append initrd=/imgs/.IMA

   LABEL IMG
      MENU LABEL  -- 加载 IMG 镜像
      kernel /boot/ISOLINUX/memdisk
      append initrd=/imgs/.IMG

作者: lanlanlei091 时间: 2011-3-30 13:26
加载的ISO，如果超过内存的容量怎么办？？？

请问有解决的办法没？？

作者: syrea 时间: 2011-5-8 17:05
按照这样写的菜单，我测试了几个都不成功。

LABEL runISO
      MENU LABEL  -- 加载 ISO 镜像
      LINUX memdisk
      INITRD /imgs/.iso
      APPEND iso raw

         LABEL IMG
      MENU LABEL  -- 加载 IMG 镜像
      kernel /boot/ISOLINUX/memdisk
      append initrd=/imgs/.IMG

欢迎光临无忧启动论坛 (http://bbs.wuyou.net/)