无忧启动论坛

标题: 0PE不支持USB3.0? [打印本页]

作者: 2012zghrb 时间: 2012-5-6 12:08
标题: 0PE不支持USB3.0?
金士顿8G USB2.0  用0PE自带FbinstTool处理  标准部署（只有0PE与grldr） 0PE为
http://115.com/file/anwtg9zj#
0PE-NBv1.4.3(2012-04-25)2in1-150MB.7z

0PE无任何修改，在同一块主板A75上在USB2.0正常启动，USB3.0过滚动条卡住，

Native shell [version 0.12 x86] (may 23 2011 09:21:02)
you are now in native shll

                              硬盘控制器 IDE模式
=====================================================================================
PCI\VEN_1022&DEV_780C&SUBSYS_780C1022&REV_00\3&267A616A&0&A1
Name:    Hardware ID's:
      PCI\VEN_1022&DEV_780C&SUBSYS_780C1022&REV_00
      PCI\VEN_1022&DEV_780C&SUBSYS_780C1022
      PCI\VEN_1022&DEV_780C&CC_01018A
      PCI\VEN_1022&DEV_780C&CC_0101
Compatible ID's:
      PCI\VEN_1022&DEV_780C&REV_00
      PCI\VEN_1022&DEV_780C
      PCI\VEN_1022&CC_01018A
      PCI\VEN_1022&CC_0101
      PCI\VEN_1022
      PCI\CC_01018A
      PCI\CC_0101
1 matching device(s) found.

PCI\VEN_1022&DEV_780C&SUBSYS_780C1022&REV_00\3&267A616A&0&A1
Name:    Driver installed from c:\windows\inf\mshdc.inf [pciide_Inst]. 3 file(s) used by driver:
      C:\WINDOWS\system32\DRIVERS\pciidex.sys
      C:\WINDOWS\system32\DRIVERS\atapi.sys
      C:\WINDOWS\system32\DRIVERS\pciide.sys
1 matching device(s) found.

=====================================================================================
                              硬盘控制器 AHCI模式
=====================================================================================
PCI\VEN_1022&DEV_7801&SUBSYS_78011022&REV_40\3&267A616A&0&88
Name: AMD AHCI Compatible RAID Controller
Hardware ID's:
      PCI\VEN_1022&DEV_7801&SUBSYS_78011022&REV_40
      PCI\VEN_1022&DEV_7801&SUBSYS_78011022
      PCI\VEN_1022&DEV_7801&CC_010601
      PCI\VEN_1022&DEV_7801&CC_0106
Compatible ID's:
      PCI\VEN_1022&DEV_7801&REV_40
      PCI\VEN_1022&DEV_7801
      PCI\VEN_1022&CC_010601
      PCI\VEN_1022&CC_0106
      PCI\VEN_1022
      PCI\CC_010601
      PCI\CC_0106
1 matching device(s) found.

PCI\VEN_1022&DEV_7801&SUBSYS_78011022&REV_40\3&267A616A&0&88
Name: AMD AHCI Compatible RAID Controller
Driver installed from c:\windows\inf\oem1.inf [Napa_Inst]. 1 file(s) used by driver:
      C:\WINDOWS\system32\DRIVERS\ahcix86.sys
1 matching device(s) found.

=====================================================================================
                              硬盘控制器 RAID模式
=====================================================================================
No matching devices found.

No matching devices found.

作者: zhs509 时间: 2012-5-6 12:26
本来就没添加USB3.0的驱动，全解开如何能进入桌面？全应该是不可能的，因为后面认不到盘了

你用0PE.ISO和grldr应该就没问题了

作者: pseudo 时间: 2012-5-6 12:39
标题: 如果插在usb3.0接口
按标准部署（ud里只有两个文件），如果把U盘插在usb3.0接口，启动开始有3秒读秒，要按空格键，才能进入pe桌面，并可正常使用外置工具。

因无windows 3.0驱动，所以进pe桌面后认硬盘不认u盘。

插在usb2.0接口则一切正常。

作者: 2012zghrb 时间: 2012-5-6 15:22
标题: 回复 #3 pseudo 的帖子
那要怎么添加USB3.0的驱动?

作者: my9823 时间: 2012-5-6 15:38
http://bbs.wuyou.net/forum.php?mod=viewthread&tid=202196&highlight=%2Btegl

作者: 2012zghrb 时间: 2012-5-6 16:32
标题: 回复 #5 my9823 的帖子
多谢my9823, 晚上我试下。

欢迎光临无忧启动论坛 (http://bbs.wuyou.net/)