下面引用由useronce在 2004/11/17 09:05pm 发表的内容：
(159.226.20.15/grub_chs/snapshots/geexbox.jpg)
GeeXBox 简体中文版 － FAT32 运行
===========================================================
下载//159.226.20.15/incoming/Grub 相关/GeeXBox
...
下面引用由huaqingyuan在 2004/11/19 06:15pm 发表的内容：
useronce:
你好，我还比较关心geexbox播放网络上的问题，我找到了一些文章，但是都没有实验成功。你能说一下该怎么做吗？
其实useronce给我们的那个geexbox已经很好了，你如果有电视卡，需要改一下光盘中
/geexbox/etc/tvcard 脚本
TV_CARD=
TV_TUNER=
设置值在这个文件中给出了地址，具体你打开这个设置文件自己看一下！
下面引用由cgistar在 2004/11/20 10:33am 发表的内容：
其实useronce给我们的那个geexbox已经很好了，你如果有电视卡，需要改一下光盘中
/geexbox/etc/tvcard 脚本
TV_CARD=
TV_TUNER=
设置值在这个文件中给出了地址，具体你打开这个设置文件自己看一下！
下面引用由hai2002713在 2004/11/23 03:36pm 发表的内容：
下载了Codecs后是不是要解压缩后放入codecs目录中，还是直接把压缩包放入codecs中不需要解压缩？？！请指教！～～
下面引用由zhenfu在 2004/11/23 05:24pm 发表的内容：
测试如下。。
加入 title GeeBox CHS
kernel (hd0,4)/geexbox/boot/vmlinuz root=/dev/ram0 rw init=linuxrc boot=hda5 vga=785 video=vesa:ywrap,mtrr console=/dev/tty1
initrd (hd0,4)/geexbox/boot/initrd.b ...
下面引用由cgistar在 2004/11/24 04:30am 发表的内容：
电视卡播放100％需要有线频道列表，geexbox能支持电视卡，但不能支持自动搜台，希望新版有这个功能吧！
下面引用由zhenfu在 2004/11/23 05:24pm 发表的内容：
测试如下。。
加入 title GeeBox CHS
kernel (hd0,4)/geexbox/boot/vmlinuz root=/dev/ram0 rw init=linuxrc boot=hda5 vga=785 video=vesa:ywrap,mtrr console=/dev/tty1
initrd (hd0,4)/geexbox/boot/initrd.b ...
下面引用由useronce在 2004/11/25 09:02am 发表的内容：
从你的配置菜单的内容看，没有问题，如果分区情况真如你说得那样的化。
那还有一个可能的原因，你的 D: 会不会用了 NTFS? 如果真的是这样，就有可能发生
这种情况。
下面引用由zhenfu在 2004/11/25 12:33pm 发表的内容：
那是..D盘的确是NTFS......
ATI cards － atitvout
S3 cards － s3switch
nVidia cards － nvtv
* Language :
You can easily select your preferred menu language by editing the file
GEEXBOX/etc/lang. This as no effect on DVD language (see the MPlayer
section). If your language is not available, you can translate the menu
in your own language. This simply involve the creation of
GEEXBOX/etc/mplayer/menu_LANG.conf and
GEEXBOX/usr/share/mplayer/help_LANG.txt.
* MPlayer :
This is where you can do most of the configuration and tweaking.
The options take place in the file packages/MPlayer/mplayer.conf.
You may want to modify options such as OSD font size (subfont-text-scale).
You can also add lots of options such as DVD default language
(eg: alang=fr,en). The best place to find them is the MPlayer manpage
for Linux users (man -l build/MPlayer-*/DOCS/mplayer.1). You should also
have a look at the MPlayer documentation (in build/MPlayer-*/DOCS or at
http://mplayerhq.hu/DOCS/).
Another file you may modify is the packages/MPlayer/menu.conf. You can
remove items you don';t need, or you can translate it in your own language
for example.
Then the last file you can look at is the packages/MPlayer/build which
contain the selection of options which are built into MPlayer.
* tvout :
Enabling the TV-Out is achieved with the help of multiple small programs
dedicated to different video card brands. Currently we use atitvout
for ATI cards, s3switch for S3 cards and nvtv for nVidia cards (and
possibly intel i810 and 3dfx cards). The configuration of those programs
is done in config/tvout. There you can choose the TV standard you
want (pal, ntsc...) and you can also modify specific options for nvtv.
Please note that you can also define the output aspect (say 4:3 or 16:9
display) in this file through the line :
TVOUT_ASPECT="4:3"
This parameter will be used both for TVOut and regular (CRT/TFT) display.
You can also specify the desired height/width values and your display';s
horizontal and vertical frequencies in case you have unusual screen like
WideScreens or videoprojector. This can be done, editing the
/etc/mplayer/mplayer.conf file. Default parameters are shown below (please
uncomment lines related to frequency if you want to use them) :
screenw=800
screenh=600
#monitor-hfreq=31.5k-50k
#monitor-vfreq=50-90
* Lirc :
You can choose one of the supported remote controller by editing the file
GEEXBOX/etc/remote. Also take care to chose the corresponding ir receiver
in the same configuration file. If you want to modify the key binding of
your remote controler, look at the file GEEXBOX/etc/lirc/lircrc_REMOTE.
* network :
You can configure the network in the file GEEXBOX/etc/network.
There you can chose the IP address used by the GeeXboX (default is to
use DHCP and if it don';t work, fall back to 192.168.0.54.
You can also specify a login and a password which will be used to connect
to windows shares (default will only connect to anonymous shares).
You can also declare some NFS mounts in GEEXBOX/etc/nfs.
* wifi :
By default, GeeXboX tries to autodetect your network settings.
If you have both traditionnal NIC and WiFi cards, only the latest will
be setup. You may have to modify the /etc/network file in order to fit
your network';s settings.
In this one, 4 lines are related to wireless cards :
* PHY_TYPE="auto" # Network physical type (auto|ethernet|wifi)
* WIFI_MODE="managed" # Wifi working mode (managed|ad-hoc)
* WIFI_WEP="" # Wifi WEP key
* WIFI_ESSID="any" # Wifi SSID
These lines let you configure most of the settings. You can let
autodetection enable or even force the use of ethernet or WiFi adapters.
In the same way, this let you choose between the managed and the ad-hoc
mode and let you define your WEP key and SSID.
* gateway :
GeeXboX supports access to the Internet. In the case you';ve got a
connection to the Internet, you may share it with your multimedia box,
using a router or a gateway. For this, simply define the gateway IP
address in the /etc/network file.
* GATEWAY="" # Gateway IP ("" for DHCP or no internet connection)
* tv configuration :
GeeXboX supports TV inputs and tuners. The system hardly tries to
autodetect the card and the tuner. You can force the settings and skip
the autodetection try. Please modify the /etc/tvcard as described :
#TV CARD/TUNER Model (AUTO for autodetection or look at the following urls)
#http://www.linuxhq.com/kernel/v2.6/2/Documentation/video4linux/CARDLIST.bttv
#http://www.linuxhq.com/kernel/v2.6/2/Documentation/video4linux/CARDLIST.tuner
TV_CARD=AUTO
TV_TUNER=AUTO
TVIN_STANDARD=pal
Please let the AUTO parameter whether you want to keep autodetection,
or replace it by the number of your card and tuner types, according to
the previous URL. Please be careful : in order to force the card and tuner
types, you have to know the EXACT REFERENCES of your hardware.
Once done, you should be able to use the TV inputs (Composite and S-VHS)
of your TV card. In the same way, you can use the tuner to watch TV.
For that, you will have to define the region you belongs to and the
frequency of the TV channels you want to watch.
Once again, simply edit the /etc/tvcard file :
# TV Channels
# Syntax : CHAN="Channel Title":"Channel Frequency"
# Example :
# CHAN="France 2":"26"
# CHAN="Canal +":"K08"
# TV Channels List
# Available : france, europe-east, europe-west, us-bcast, us-cable
CHANLIST=france
Please be careful when editing channels and simply use the same syntax
as described above and TV channels should be present in the main menu.
* audio configuration :
GeeXboX supports both analog and digital audio output through regular JACK
connectors or RCA SPDIF one. By default, output is set to analog. You can
change this, by editing the /etc/audio file :
# Output using SPDIF (yes/no), otherwise ANALOG output
SPDIF=no
Remember that you will need to set your output to SPDIF if you want
to connect your soundcard to an external amplifier for decoding AC3/DTS
streams (using passthrough mode).
* DXR3/Hollywood+ cards :
Users with this kind of hardware decompression card does NOT even need
to have a video board and sound card to use GeeXboX. On the drawbacks,
only the tvout connector can be used with DXR3 cards (no CRT display).
You may have to set the required image norm (PAL/NTSC) in the /etc/tvout
file and the kind of audio output you want to use (Analog or SPDIF)
in /etc/audio.
下面引用由弄潮儿-NET在 2004/12/01 11:21am 发表的内容：
我也引启不了,是不是用他的那个专用的ISO生成工具?
下面引用由huaqingyuan在 2004/11/19 02:31pm 发表的内容：
我在笔记本上测试，为什么不能全屏，当我用全屏模式时，图象被横向拉长。下方没有图象。
当我用非全屏模式时，图象在屏幕中间。
我怎么样才可以解决这个问题？
下面引用由jhlcf在 2004/12/01 11:16am 发表的内容：
向高手请教：
1、怎么用Grub实现GeeXBOX在FAT32分区上运行的呢？
我下载最新的GeeXBOX测试版本，想更新一下文件结果就引导不了了，要修改哪些文件呢？
2、请问有哪位在IBM ThinkPad600E 机器上成功驱 ...
下面引用由弄潮儿-NET在 2004/12/01 11:27pm 发表的内容：
你说的是这个吗?
http://movix.sourceforge.net/
大家一起研究...
下面引用由useronce在 2004/11/19 12:03pm 发表的内容：
成功了！ 诸位可以到这里下载这个 Ezboot 版的 GeexBox 光盘运行版。
由我和 MR. hnlyzhd 共同完成！ ；）
ftp://159.226.20.15/pub/geexbox/ 约 20MB
这里有一些运行截图： http://159.226.20.15/grub_chs/gee ...
下面引用由useronce在 2005/06/13 08:11am 发表的内容：
请使用这个地址：
http://sysfot.zdwx.com/tmp/g99.7z
下面引用由zrfdcs在 2005/06/19 04:12pm 发表的内容：
应该是：
http://sysoft.zdwx.com/tmp/g99.7z
下面引用由useronce在 2005/06/24 01:02pm 发表的内容：
use WinRar is the simple way. ;-)
下面引用由srlmm在 2005/06/27 07:02pm 发表的内容：
找了个WINRAR3.5终于打开了，很不错，谢谢
下面引用由hnlyzhd在 2005/05/31 00:01am 发表的内容：
中文英文全版下载，可以直接移植到硬盘上启动。
http80/cfan/200406/movix.rar
| 欢迎光临 无忧启动论坛 (http://bbs.wuyou.net/) | Powered by Discuz! X3.3 |