无忧启动论坛

标题: 文件压缩、解压缩工具 WinRAR 5.50 Beta3（20170524）更新 [打印本页]

作者: 2011momoto 时间: 2017-4-14 10:19
标题: 文件压缩、解压缩工具 WinRAR 5.50 Beta3（20170524）更新
本帖最后由 2011momoto 于 2017-5-24 17:08 编辑

32位、64位自适应单文件，有兴趣的朋友请试试。

文件大小：1.78M
文件下载：https://pan.baidu.com/s/1b9jurW 密码: wnyw

作者: wsdyleon 时间: 2017-4-14 11:08
更新了什么？

作者: 1400700226 时间: 2017-4-14 12:35

wsdyleon 发表于 2017-4-14 11:08
更新了什么？

http://rarlab.com/rarnew.htm

Version 5.50 beta 1

1. WinRAR and command line RAR use RAR 5.0 archive format by default.
   You can change it to RAR 4.x compatible format with "RAR4" option
   in archiving dialog or -ma4 command line switch.

   If you prefer RAR 4.x format by default, use "Create default..."
   button on "Compression" page of WinRAR settings and set "RAR4"
   in the displayed dialog.

   This change affects only new clean installs. If you already saved
   RAR format in the default compression profile in previous versions,
   WinRAR respects stored settings.

2. Use "Set master password" button in "Organize passwords" dialog
   to encrypt saved password records and protect them from unauthorized
   access.

   If saved passwords are protected with master password, you need to
   enter the master password and press "OK" in password prompt to access
   them. If entered password does not match the master password,
   it is treated as a usual password for archive operations.

   Once entered, the master password is valid until WinRAR is closed.
   Close WinRAR and open it again after specifying the master password
   if you wish to see how protection works. Enter a valid and then
   empty master password to remove encryption from previously protected
   password records.

   This WinRAR version uses a new data format for password organizer,
   so passwords stored in "Organize passwords" dialog are not readable
   by older versions. It does not affect archive encryption formats
   and encrypted archives are compatible with previous WinRAR version.
   Organizer data is converted to a new format only when you save it
   and not immediately after installing WinRAR.

3. Prompt proposing to set the master password is displayed
   when storing a password in compression profile. You can enter
   the master password to encrypt password data stored in Registry
   and protect it from unauthorized access. You will need to enter
   the master password in password prompt dialog to access
   such compression profile after that.

   Once entered, the master password is valid until WinRAR is closed.
   Close WinRAR and open it again after specifying the master password
   if you wish to see how protection works.

4. By default, WinRAR uses AES-256 in CTR mode to encrypt ZIP archives.
   While AES-256 is significantly more secure than ZIP 2.0 legacy
   encryption algorithm, it can be incompatible with some older
   unzip software. If compatibility with such tools is required,
   you can enable "ZIP legacy encryption" option in the password
   dialog or use -mezl switch in the command line mode.

5. Added extraction support for .LZ archives created by Lzip compressor.

6. Modern TAR tools can store high precision file times, lengthy
   file names and large file sizes in special PAX extended headers
   inside of TAR archive. Now WinRAR supports such PAX headers
   and uses them when extracting TAR archives.

7. New "Store modification time" option on "Time" page of archiving
   dialog can be used to prohibit storing the file modification time
   in RAR 5.x archives. Former "High precision modification time"
   option is replaced by "High precision time format".

8. New "Full paths in title bar" option in "Settings/General" dialog.
   If enabled, the full path of currently opened folder or archive
   is displayed in WinRAR title bar.

9. New "Settings/Archives" page provides "File types to open as
   archives first" group of options. Here you can define how Enter
   or double click on a file with non-archive extension and archive
   contents should be processed in WinRAR file list. Examples
   of such files are .docx or self-extracting .exe archives.
   You can instruct WinRAR to open such files as archives,
   to run them, to handle them similarly or differently inside
   and outside of archives, to never run specified file types
   even if they do not include any archived contents.

   Default settings are to open self-extracting exe and to run
   other types of archives with non-archive extension.

   Regardless of these options, you can always open any such
   archive file by pressing Ctrl+PgDn on its name in WinRAR file list.

  10. New "Copy full names to clipboard" command in "File" menu
   places full names of selected files to clipboard.

   This command is also added to context menu displayed
   when right clicking the file list in WinRAR. Several other commands,
   which are also present on the toolbar or in main menu,
   such as "View" and "Repair", are removed from this context menu.

  11. LZ and ZIPX are added to list of associations in Settings/Integration
   dialog.

  12. LZ and ZIPX extensions are added to default list of formats for
   -ms switch ("Specify file types to store") invoked without parameters.

  13. You can specify 'f' charset value in -sc switch to use UTF-8
   encoding. For example:

   rar a -scfl arcname @filelist.txt

   to read contents of filelist.txt as UTF-8 text.

  14. RAR "lt" and "vt" commands display file times with nanosecond
   precision. Such precision is used in RAR5 archives created
   by RAR/Unix 5.50 and newer. Archives created by WinRAR have 100ns
   file time precision.

  15. Only '+', '-' and '1' precision modifiers are supported
   in -ts switch now. Use '+' to store the file time with maximum
   precision, '-' to omit the file time and '1' to store it with
   1 second precision. Intermediate precision modes previously
   defined with '2' and '3' modifiers are not available in RAR 5.0
   archive format and ignored by -ts switch.

  16. If a wrong password is entered when unpacking an encrypted file
   in RAR5 archive, WinRAR proposes to enter a valid password
   for same file again instead of aborting extraction.

  17. File path information is displayed if mouse pointer is placed over
   a name of archiving file in the operation progress window.

  18. Name of currently active compression profile is displayed
   in the archiving dialog above "Profiles..." button.

  19. If "Find" command is invoked from inside of archive subfolder,
   "File names to find" will include the path to this subfolder.
   So "Find" will search only starting from this subfolder.

  20. Bugs fixed:

   a) WinRAR failed to unpack files in ZIP archives compressed
      with XZ algorithm and encrypted with AES;

   b) if "Windows progress bars" option in WinRAR settings was turned off
      and "Put each file to separate archive" archiving mode was used,
      "gold" part of total progress bar did not display the compressed
      data ratio correctly;

   c) SFX archive extraction progress was incorrect in case of
      multivolume SFX archive with total volume size exceeding 4 GB;

   d) if archived folder name included trailing spaces, if user
      selected and extracted some folders in non-root archive folder
      and if "Allow potentially incompatible names" extraction option
      was turned off, WinRAR could lose one or more leading characters
      in extracted folder name;

   e) if only creation or only last access file time was stored in RAR5
      archive with 1 second precision, such as with -ma5 -tsm- -tsa1
      switches, this stored time was ignored when extracting.

作者: 1400700226 时间: 2017-4-14 12:35
论坛又内部错误，发重了。。。编辑掉

作者: lbw2007 时间: 2017-4-14 13:04
本帖最后由 lbw2007 于 2017-4-14 13:13 编辑

好小，支持一下！

能帮忙搞一个自适应二合一单文件吗？

作者: Anson4 时间: 2017-4-14 14:54
好久没用这个了，觉得这个软件的发展方向不能适应潮流了。

作者: lyq1959 时间: 2017-4-14 17:17
下载试用，谢谢分享！

作者: 窄口牛 时间: 2017-4-14 19:49
五楼是要直接运行还是视环境安装？

作者: 窄口牛 时间: 2017-4-14 23:25
86&64自适应安装包

winrar.part1.rar (1.95 MB, 下载次数: 35)

winrar.part2.rar (1.95 MB, 下载次数: 38)

winrar.part3.rar (12.78 KB, 下载次数: 33)

作者: 2011momoto 时间: 2017-4-15 14:09

窄口牛发表于 2017-4-14 23:25
86&64自适应安装包

兄台这是安装包，需要安装后才能运行。

x86、x64自适应单文件应是在x86、x64不同系统下可以直接运行的文件。

作者: 2011momoto 时间: 2017-4-15 14:26

lbw2007 发表于 2017-4-14 13:04
好小，支持一下！

能帮忙搞一个自适应二合一单文件吗？

试试看，行不行。
http://pan.baidu.com/s/1boQaq7P 密码: ddyh

作者: 2011momoto 时间: 2017-5-6 08:37
文件压缩、解压缩工具 WinRAR 5.50 Beta2（20170506）更新

作者: 2011momoto 时间: 2017-5-24 17:30
文件压缩、解压缩工具 WinRAR 5.50 Beta3（20170524）更新

作者: 青青草 时间: 2017-5-25 10:09
谢谢分享！

作者: micol 时间: 2017-5-26 06:45

2011momoto 发表于 2017-5-24 17:30
文件压缩、解压缩工具 WinRAR 5.50 Beta3（20170524）更新

能不能搞到烈火一样的美化版本？

作者: 2011momoto 时间: 2017-5-26 09:23

micol 发表于 2017-5-26 06:45
能不能搞到烈火一样的美化版本？

似乎没有太大的差别啊。

欢迎光临无忧启动论坛 (http://bbs.wuyou.net/)