无忧启动论坛

标题: pxe 安装ubuntu卡着不动了 [打印本页]

作者: mayi    时间: 2020-7-26 16:20
标题: pxe 安装ubuntu卡着不动了
buntu18.04配置的pxe服务器 安装ubuntu18.04卡着不动了,用了dnsmasq,nfs

QQ图片20200726161855.png (84 KB, 下载次数: 143)

QQ图片20200726161855.png

作者: longpanda    时间: 2020-7-26 17:01
你把Ubuntu启动参数里面的 quiet  splash 删掉,那样能打印log出来,方便确认问题。


作者: mayi    时间: 2020-7-30 18:08
longpanda 发表于 2020-7-26 17:01
你把Ubuntu启动参数里面的 quiet  splash 删掉,那样能打印log出来,方便确认问题。

谢谢,已解决了,能正常启动了,但是我用的preseed.cfg,不能自动安装呢,好像这个文件没起作用,像没调用一样
作者: mayi    时间: 2020-8-3 10:13
这又是什么鬼问题,坑真多

1.png (50.96 KB, 下载次数: 124)

1.png

作者: mayi    时间: 2020-8-3 11:12
mayi 发表于 2020-8-3 10:13
这又是什么鬼问题,坑真多

https://www.cnblogs.com/xlhblog/archive/2011/10/26/2225627.html     类似的问题
Ubuntu 安装时(initramfs) Unable to find a medium containing a live file system错误的解决
这个问题搞了我一整天,积累下不少教训,下面记录如下:
在安装ubuntu10.10 LiveCD时,提示(initramfs) Unable to find a medium containing a live file system错误。
然后就觉得是CD的问题?用另外一个电脑虚拟机实验安装,没有问题。
重新刻录LiveCD,还是有这个错误
刻录maverick-dvd-amd64还是有这个问题。
得,那就搜吧,baidu好一阵,搜得结果都不知所云。
———————— 神奇的分割线 ————————
今晚忽然想起来,应该用google搜,我操,果真是国外论坛专业,一搜就解决了问题。
原来是哥的新电脑主板太先进了,把CDROM插到SATA3接口上了,ubuntu10.10愣是认不出来!
换接到SATA2口,立即解决问题。
看人论坛上说的:
Evidently, in addition to disabling the quick-boot option in the bios, you MUST use the left USB port on the Asus 1018p.

I was trying to install using the right usb ports, which are USB 3.0, however are apparently not bootable.
看到这句,哥就觉得是硬件问题了。
后来竟然直接找到了问题答案:
I was just looking at this thread since I had a similar problem trying to install 10.10 from CD. I finally figured it out. I tried to think about everything I had changed since I had previously installed 10.04. I remembered changed the SATA port that the DVD drive plugged into, based on advice for installing OSX (which I had been trying to do). I moved the connector back and sure enough, no more "..unable to find live file system" problem.
汗!附上地址:
http://ubuntuforums.org/showthread.php?t=1332782








欢迎光临 无忧启动论坛 (http://bbs.wuyou.net/) Powered by Discuz! X3.3