SRS_F6纯仿真驱动返回模块（5.31正式版发布）（6.10支持x64）

sratlf

目录问题的话统一放在BOOT下如何

如 BOOT\SRS\SRS.ZIP
             \IMG\IMG.IMG

OEM.ZIP还是在根目录

目录清爽些  而且大多数合盘都有BOOT文件夹

sratlf

usb-cdrom返回成功  手底下没有zip的盘了  都是usb-hdd的  

没有测试用usb-cdrom启动  同时光驱里有可引导盘时 chainloader （cd）的情况

需要的话有空我测试下

sratlf

自己去置顶贴里找ftp密码去

sratlf

@mannu

hi mannu, after you edited the kernel.img (20mb), you can also use 7zip to compress it.

you just need to rename the kernel.img.gz to kernel.img. I always do that.

sratlf

@maanu

it is sure that you can use the KERNEL.IMG form the 5.31 release and th SRS.ZIP form the old release. in the fact, you can use any SRS.ZIP as you want, you only need to konw if the SRS.ZIP has the currect drovers that you need.

the latest OEM.ZIP you can download form the official website(I do not know if this word is currect) or form the ftp2\zhhsh , dvd008 has upload a lot(but maybe not everyone is the latest). you can also ask dvd008 for detail.

the next question, I am not sure, you can try it.you need to use the zhhsh`s srs_f6 module, first choose the [1] User Menu , then [2] /OEM_SRS.ZIP  or [A] Input SRS or OEM Drivepack (you need to manual input), then you can choose floppy A and B, then choose the [1] Bootable CD or [8] /I386/SETUPLDR.BIN Loader. good luck.

the srs_f6 also support the one document .SYS file, it is the  [A] Input SRS or OEM Drivepack , you can also input the .SYS file path, no problem.

[ 本帖最后由 sratlf 于 2010-6-12 22:53 编辑 ]

sratlf

@mannu

translation of zhaohj`s

the drivepack is divided into four types: the built-in driver with TXTSETUP.SIF  drivepack, SRSID.TXT  drivepack, OEM  drivepack, single SYS file  drivepack.

just input the currect path and name, the program will automatically do the follows.