不能运行gdisk,ntfsdos,请各位帮看看config是否有问题

allpurpose

[这个贴子最后由allpurpose在 2005/12/03 10:05am 第 1 次编辑]

如题,我自己做个img引导到dos,但在dos运行上面两个程序提示出错。错误如图.在请教一下 在dos有啥好分区工具和格式化工具,最好是支持ntfs格式的.
[UploadFile=CEB4C3FCC3FB_1133575193.gif]
这是config.sys的代码

2. [menu]
3. menuitem=CD, Start computer with CD-ROM support.
4. menuitem=NOCD, Start computer without CD-ROM support.
5. menudefault=CD,30
6. menucolor=7,0
7. [CD]
8. device=himem.sys /testmem:off
9. DEVICEHIGH=UDMA.SYS
10. DEVICEHIGH=VIDE-CDD.SYS /D:IDE-CD
11. [NOCD]
12. device=himem.sys /testmem:off
13. [COMMON]
14. files=60
15. buffers=20
16. dos=high,umb
17. stacks=9,256
18. lastdrive=z

复制代码

这是AUTOEXEC.BAT的代码

2. @ECHO OFF
3. set EXPAND=YES
4. SET DIRCMD=/O:N
5. SMARTDRV
6. xmsdsk 4096 /y > NUL
7. cls
8. findramd >nul
9. path=%RAMDRIVE%\;a:\
10. copy command.com %RAMDRIVE%\ > NUL
11. set comspec=%RAMDRIVE%\command.com
12. copy extract.exe %RAMDRIVE%\ > NUL
13. %RAMDRIVE%\
14. extract /y /e /l %RAMDRIVE% a:\ebd.cab > NUL
15. cls
16. set temp=c:\
17. set tmp=c:\
19. IF "%config%"=="NOCD" GOTO QUIT
20. LH SHSUCDX /D:?IDE-CD /D:?USB-CD > nul
21. findcd >nul
22. ECHO.
23. echo     Your ramdrive is %RAMDRIVE%
24. echo     Your CDrom is %CDROM%
25. :QUIT

复制代码

magictek

妳應該在Config裏麵加載一個EMM386或者UMBPCI