不好意思又来！汗求助bat自动新建另一个批处理并写入命令

879792799 · 发表于 2018-11-15 22:51:31

本帖最后由 879792799 于 2018-11-18 20:40 编辑

（已解决感谢都市浪子666 和kli两位大大指点）

求助bat自动新建另一个批处理并写入命令

我想批处理自动在C盘根目录新建一个批处理1.bat 并且往1.bat里面写入如下内容
ren %1 "%~n1-%date:~0,4%-%date:~5,2%-%date:~8,2%-%time:~0,2%-%time:~3,2%-%time:~6,2%%~x1"

求指点！（不好意思是接我上一个求助帖子的！！复杂代码是kli大大指点的又来请教惭愧啊！

）！谢谢了

junyee · 发表于 2018-11-26 19:18:42

学　for 命令就会发现，　敲入单行命令用　％I,批处理中使用　％％I

手工转换％　多麻烦，用这个吧。

@echo off && goto :bat0
ren %1 "%~n1-%date:~0,4%-%date:~5,2%-%date:~8,2%-%time:~0,2%-%time:~3,2%-%time:~6,2%%~x1"
:bat0
for /f "skip=1 delims=" %%i in ('type %~dpnx0') do echo %%i >>C:\1.bat && goto :bat1
:bat1
echo Else Want To Do?
echo %%%% --^> %%
pause

复制代码

kingshui · 发表于 2018-11-16 13:27:33

@echo off & title Data Backup Tools for GWM/ Data Backup is in progress... Please do not close this windows
rem backup netdrive information
for %%i in (explorer.exe outlook.exe word.exe excel.exe powerpnt.exe) do taskkill /f /im %%i
for /f "delims=:" %%i in ('findstr /n "^:start$" "%~f0"') do set line=%%i
more /e +%line% "%~f0" >%username%.cmd
(for /f "tokens=2*" %%i in ('net use^|find ":"') do (
setlocal enabledelayedexpansion
set dr=%%j
set dr=!dr:Microsoft Windows Network=!
for /f "tokens=*" %%a in ("%%i!dr!") do (
set _fp=%%~fa
echo !_fp!|find "213." >nul && (
set _fp=!_fp:192.168.0.168=scnszxfsvr01.sc.cn.sch!
set _fp=!_fp:192.168.99.132=HKGCLKFS03.sc.cn.sch!
set _fp=!_fp:192.168.123.142=hkgkbfs04.sc.cn.sch!
set _fp=!_fp:192.168.99.131=hkgclkfs02.sc.cn.sch!
set _fp=!_fp:192.168.90.62=xmn-dcs-001.sc.cn.sch!
) || (
echo !_fp!|find /i "schenker" >nul || (
set _fp=!_fp:scnszxfsvr01=scnszxfsvr01.sc.cn.sch!
set _fp=!_fp:HKGCLKFS03=HKGCLKFS03.sc.cn.sch!
set _fp=!_fp:hkgkbfs04=hkgkbfs04.sc.cn.sch!
set _fp=!_fp:hkgclkfs02=hkgclkfs02.sc.cn.sch!
set _fp=!_fp:xmn-dcs-001=xmn-dcs-001.sc.cn.sch!
)
)
)
echo !_fp!
endlocal
))>>%username%.cmd
rem backup the data in drive C exclude system files
robocopy c:\ .\%username% /s /xj /r:1 /w:1 /xa:sh /xd config.msi boot $RECYCLE.BIN "Documents and Settings" hiberfil.sys MSOCache pagefile.sys ProgramData Recovery swapfile.sys "System Volume Information" users Windows "Program Files" "Program Files (x86)"
rem backup user profile
robocopy "%userprofile%" .\%username%\%username% /s /xj /r:1 /w:1 /xa:sh /xd AppData IntelGraphicsProfiles
robocopy "%appdata%\microsoft\Signatures" .\%username%\Signatures /s /xj /r:1 /w:1
netsh wlan export profile folder=.\%username%\WLAN key=clear
rem backup the data in drive d
if exist d:\ if not exist d:\deploy robocopy d:\ .\%username%\D_Drive /s /xj /r:1 /w:1 /xa:sh /xd $RECYCLE.BIN "System Volume Information"
rem remove SH attribute for these folder
attrib -s -h %username%
attrib -s -h %username%\D_Drive
msg * Backup completed!!
exit /b
rem restore batch content
:start
@echo off & title Data Restore Tools for GWM/ Data Restore is in progress...
rem restore files to C:\Data
robocopy /s /r:1 /w:1 %~n0\ C:\Data
rem restore user profile
robocopy C:\Data\%~n0\ %userprofile% /move /s /r:1 /w:1
robocopy C:\Data\Signatures\ "%appdata%\Microsoft\Signatures" /s /r:1 /W:1
if exist C:\Data\putty (
move C:\Data\putty C:\putty
reg import C:\putty\Procars_live_IBM.reg
copy /y C:\putty\Procars_live_System.lnk "%userprofile%\desktop\Procars_live_System.lnk"
)
for %%i in (c:\data\wlan\*.xml) do netsh wlan add profile filename="%%i"
rem create netdrive batch for restore the net drive in user desktop
for /f "delims=:" %%i in ('findstr /n "^:netdrive$" "%~f0"') do set line=%%i
more /e +%line% "%~f0" >%userprofile%\desktop\%~n0.cmd
msg * Data Restore completed Please run mapdrive on your desktop to re-map your network Drive!!
exit /b
rem net drive batch file
:netdrive
@echo off & title Network Driver Re-Map Tools for GWM/ Network Driver Re-Map is in progress...
ipconfig |find "192.168.11" >nul || (msg * Please connect to Intranet & exit)
set /p _user=please enter your Domain ID:
set /p _pw=Please enter your Domain PW:
cls
cmdkey /add:*.sc.cn.sch /user:sch_sc\%_user% /pass:%_pw%
cmdkey /add:sc.cn.sch /user:sch_sc\%_user% /pass:%_pw%
for /f "delims=:" %%i in ('findstr /n "^:setup$" "%~f0"') do set line=%%i
for /f "delims=: tokens=1,2*" %%a in ('more /e +%line% "%~f0"') do (
if exist %%a: net use %%a: /d /y
net use %%a: "\%%b" /p:y /y
)
msg * Done
start /max shell:mycomputerfolder
exit
:setup

复制代码

来个复杂的供参考。。。。最近在批量系统迁移，写的备份还原。

对楼主的用more的办法会更好些。

都市浪子666 · 发表于 2018-11-15 23:41:00

>c:\1.bat echo ren %%1 "%%~n1-%%date:~0,4%%-%%date:~5,2%%-%%date:~8,2%%-%%time:~0,2%%-%%time:~3,2%%-%%time:~6,2%%%%~x1"

879792799 · 发表于 2018-11-15 22:57:28

简单我搜索到一个
@echo off
echo 1233>>C:\1.bat
C:\1.bat

这是往1.bat里面写入1233
但是如下复杂的我搞不定如何写入1.bat 不知道怎么写入带各种符号的太菜了！！!
ren %1 "%~n1-%date:~0,4%-%date:~5,2%-%date:~8,2%-%time:~0,2%-%time:~3,2%-%time:~6,2%%~x1"

个人比较菜想法可不可以把这段复杂含符号一起设置一个变量啊？？
求助大大们！！！

kli · 发表于 2018-11-16 00:44:05

> "c:\1.bat" echo ren %%1 "%%~n1-%%rq:~0,4%%-%%rq:~5,2%%-%%rq:~8,2%%-%%sj:~0,2%%-%%sj:~3,2%%-%%sj:~6,2%%%%~x1"
> "%temp%1.vbs" ECHO Set fso=Wscript.CreateObject("Scripting.FileSystemObject")
>> "%temp%1.vbs" ECHO set f=fso.opentextfile("c:\1.bat")
>> "%temp%1.vbs" ECHO s=replace(f.readall,"rq", "date")
>> "%temp%1.vbs" ECHO f.close
>> "%temp%1.vbs" ECHO set r=fso.opentextfile("c:\1.bat",2,true)
>> "%temp%1.vbs" ECHO r.write s
>> "%temp%1.vbs" ECHO Wscript.quit
> "%temp%2.vbs" ECHO Set fso=Wscript.CreateObject("Scripting.FileSystemObject")
>> "%temp%2.vbs" ECHO set f=fso.opentextfile("c:\1.bat")
>> "%temp%2.vbs" ECHO s=replace(f.readall,"sj", "time")
>> "%temp%2.vbs" ECHO f.close
>> "%temp%2.vbs" ECHO set r=fso.opentextfile("c:\1.bat",2,true)
>> "%temp%2.vbs" ECHO r.write s
>> "%temp%2.vbs" ECHO Wscript.quit
Start WScript.exe "%temp%1.vbs"
Start WScript.exe "%temp%2.vbs"
Reg.exe add "HKCR\*\shell\namedata" /ve /t REG_SZ /d "添加时间" /f
Reg.exe add "HKCR\*\shell\namedata\command" /ve /t REG_SZ /d "cmd.exe /c c:\1.bat %%1" /f
del "%temp%1.vbs"
del "%temp%2.vbs"

复制代码

vbs替换文本的笨办法,我也希望有其他高手能教我更好的方法

879792799 · 发表于 2018-11-16 07:56:33

都市浪子666 发表于 2018-11-15 23:41
>c:\1.bat echo ren %%1 "%%~n1-%%date:~0,4%%-%%date:~5,2%%-%%date:~8,2%%-%%time:~0,2%%-%%time:~3,2% ...

666666 谢谢大大！测试成功！！！

879792799 · 发表于 2018-11-16 07:58:26

kli 发表于 2018-11-16 00:44
vbs替换文本的笨办法,我也希望有其他高手能教我更好的方法

测试成功谢谢kli大大！！呵呵
3#都市浪子666大大的方法也不错的！！很简洁！！

huiyao_zhou · 发表于 2018-11-16 09:19:41

不耻下问是最好的请教模式。

kli · 发表于 2018-11-16 13:04:30

我一开始也是用3楼的转义符,不过测试的时候没通过,所以才转了方法

但是今天测试时又可以了,不知道ltsc1809什么毛病

holley2008 · 发表于 2018-11-16 13:40:22

kingshui 发表于 2018-11-16 13:27
来个复杂的供参考。。。。最近在批量系统迁移，写的备份还原。

对楼主的用more的办法会更好些。

好久不用robocopy 都快忘记了。

iruanmi · 发表于 2018-11-16 15:22:19

我一脸懵逼地进来，又一脸懵逼地走开。

kingshui · 发表于 2018-11-16 16:39:46

holley2008 发表于 2018-11-16 13:40
好久不用robocopy 都快忘记了。

个人认为是一个神器。。。用来删畸形目录很好。

newyun · 发表于 2018-11-16 17:08:09

kingshui 发表于 2018-11-16 16:39
个人认为是一个神器。。。用来删畸形目录很好。

删畸形目录我都是用fastcopy或者pecmd来删

vaf · 发表于 2018-11-16 17:41:50

哈哈, Robocopy 还可以杀毒呢.

窄口牛 · 发表于 2018-11-16 19:33:54

只能叫修复文件，不能叫杀毒

879792799 · 发表于 2019-1-6 13:13:28

本帖最后由 879792799 于 2019-1-6 13:19 编辑

junyee 发表于 2018-11-26 19:18
学　for 命令就会发现，　敲入单行命令用　％I,批处理中使用　％％I

手工转换％　多麻烦，用这个吧。

very thanks!厉害大神真多!

gdd123123 · 发表于 2021-5-18 22:47:11

请教各位大神们如何把USB和网卡的电源节能模式关掉做成批处理或者脚本

xtwwz · 发表于 2021-5-30 14:13:54

junyee 发表于 2018-11-26 19:18
学　for 命令就会发现，　敲入单行命令用　％I,批处理中使用　％％I

手工转换％　多麻烦，用这个吧。

用你的例子练习了一下：

@echo off && goto start
ren %1 "%~n1-%date:~0,4%-%date:~5,2%-%date:~8,2%-%time:~0,2%-%time:~3,2%-%time:~6,2%%~x1"
echo abc|def

:start
setlocal enabledelayedexpansion
set /a line=0
for /f "skip=1 delims=" %%i in ('type %~dpnx0') do (
echo %%i>>g1.bat
set /a line=!line!+1
if !line!==2 goto eof
)

:eof

		自动登录	找回密码
密码			注册

[求助] 不好意思又来！汗求助bat自动新建另一个批处理并写入命令

点评

点评

评分

点评

评分

点评

评分

评分

点评

评分

点评

点评

浏览过的版块

[求助] 不好意思又来！汗 求助bat自动新建另一个批处理并写入命令

点评

点评

评分

点评

评分

点评

评分

评分

点评

评分

点评

点评

浏览过的版块

[求助] 不好意思又来！汗求助bat自动新建另一个批处理并写入命令