金士顿G3,用错东芝量产工具，怎么恢复(已经解决)

2011li3989721 · 发表于 2011-5-18 15:43:59

钢口处
DT1G3/2GB
04275-335

当时用ChipGenius看，我记得是SSS6691/SKXXXX的
我就上网下了个错的东芝量产工具，点了量产
结果U盘容量变成了0,再用ChipGenius看
变成了
设备名称: [G:]USB Mass Storage Device(GENERIC USB Mass Storage USB Device)
PNP设备ID: VID = 0C76 PID = 0005
设备序列号: 5&&1650BA11&&0&&8
  设备版本: 1.00
  设备类型: 标准USB设备 - USB2.0高速
芯片制造商: SSS(鑫创)
  芯片型号: SSS6677/SSS6690
产品制造商: GENERIC
  产品型号: USB Mass Storage

上网百度了一番，说SK6211_20080125_BA.exe能修复，但我打开SK6211_20080125_BA.exe，软件没发现到U盘
打开我的电脑能看到U盘，不过容量是0字节

求高手帮帮我啊

[ 本帖最后由 2011li3989721 于 2011-5-19 17:35 编辑 ]

jjsfm · 发表于 2011-5-18 15:59:33

不能用SK工具，这个应该是SSS主控的。参考这帖#6:
http://bbs.wuyou.net/forum.php?mod=viewthread&tid=179501

2011li3989721 · 发表于 2011-5-18 17:24:04

多得群友帮忙，现在U盘恢复原始了

设备名称: [G:]USB Mass Storage Device(Kingsto DataTraveler G3 USB Device)

PNP设备ID: VID = 0951 PID = 1643
设备序列号: 00E0B0FE1334F151248514DD
  设备版本: 1.00

  设备类型: 标准USB设备 - USB2.0高速

芯片制造商: SSS(鑫创)
  芯片型号: SSS6691/SK6215

产品制造商: Kingsto
  产品型号: DataTraveler G3

上网找了个6691_Kingston G3 CDROM Flash的量产软件，量产不了

2011li3989721 · 发表于 2011-5-18 17:25:23

---------------- Device 1------------------
  MP Tool Version : V2.162
  INI File Name : Random
  Format Date : 2011-05-18 16:21:31
  Flash Part No : Toshiba 43nm D3 MLC
  CE-0, Flash ID=98-D5-98-B2-76-54-0B
  VID : 0x0951
  PID : 0x1643
  Vendor Name = Kingsto
  Product Name = DataTraveler G3
  Serial Number = 00E0B0FE1334F151248514DD
  Volume Label = NO NAME
  F/W Version : 0xB3
  ISP Version : VA2.0C00
  Flash R/W Timing : 25ns
  Channel : Byte Mode
  Homogeneous Mode : On
  HID Function : Disable
  Planes(F/W) : 2
  Pages/Block : 192 pages
  Max Current : 100 mA
  Total Blocks : 1404
  Bad Blocks : 49
  Capacity : 3848936 Sectors, 1970655232 Bytes
               1924468 KBytes, 1879.36 MBytes, 1.84 GBytes

2011li3989721 · 发表于 2011-5-18 17:59:30

Starting Time: 17:56:57

Device 1:0xB3
MP Version:2.162
INI_File_Name:
Random delay 0 msec
--- Download MP ISP ---
CE-0, Flash ID=98-D5-98-B2-76-54-0B-04
### Error: Not supported Flash ###

Ending Time: 17:56:57

2011li3989721 · 发表于 2011-5-18 18:02:26

不支持闪存？
那要哪个量产工具才能用

jjsfm · 发表于 2011-5-18 22:51:02

链接看到#8：http://bbs.mydigit.cn/read.php?tid=203519

2011li3989721 · 发表于 2011-5-19 11:37:02

Starting Time: 11:28:37
Device 1:0xB3
MP Version:2.162
INI_File_Name:
Random delay 0 msec
--- Download MP ISP ---
CE-0, Flash ID=98-D5-98-B2-76-54-0B-04
Found BACKUP Table (00000159-0001)
Defect Table (00000400-0004)
  Original Bad Block - 0:0x0000
  Original Bad Block - 0:0x007E
  Original Bad Block - 0:0x0084
  Original Bad Block - 0:0x0098
  Original Bad Block - 0:0x009A
  Original Bad Block - 0:0x009C
  Original Bad Block - 0:0x009E
  Original Bad Block - 0:0x00A2
  Original Bad Block - 0:0x00A6
  Original Bad Block - 0:0x00AC
  Original Bad Block - 0:0x00B0
  Original Bad Block - 0:0x00B8
  Original Bad Block - 0:0x00BA
  Original Bad Block - 0:0x00BC
  Original Bad Block - 0:0x00BE
  Original Bad Block - 0:0x00C4
  Original Bad Block - 0:0x00C8
  Original Bad Block - 0:0x00CA
  Original Bad Block - 0:0x00CC
  Original Bad Block - 0:0x00CE
  Original Bad Block - 0:0x00D0
  Original Bad Block - 0:0x00D2
  Original Bad Block - 0:0x00D8
  Original Bad Block - 0:0x00DC
  Original Bad Block - 0:0x00DE
  Original Bad Block - 0:0x00E2
  Original Bad Block - 0:0x00E6
  Original Bad Block - 0:0x00F4
  Original Bad Block - 0:0x00F6
  Original Bad Block - 0:0x00F8
  Original Bad Block - 0:0x00FC
  Original Bad Block - 0:0x00FE
  Original Bad Block - 0:0x0104
  Original Bad Block - 0:0x010A
  Original Bad Block - 0:0x010C
  Original Bad Block - 0:0x0110
  Original Bad Block - 0:0x0120
  Original Bad Block - 0:0x0126
  Original Bad Block - 0:0x012A
  Original Bad Block - 0:0x012C
  Original Bad Block - 0:0x013C
  Original Bad Block - 0:0x0142
  Original Bad Block - 0:0x0152
  Original Bad Block - 0:0x0170
  Original Bad Block - 0:0x038E
  Original Bad Block - 0:0x0578
  Original Bad Block - 0:0x0579
  Original Bad Block - 0:0x057A
  Original Bad Block - 0:0x057B
Defect Table shows 1355 Good blocks, 49 Bad blocks
SafeErase (0,1404)
  Erase failed Block - 0:0:0x0000
  Erase failed Block - 0:0:0x007E
  Erase failed Block - 0:0:0x0084
  Erase failed Block - 0:0:0x0098
  Erase failed Block - 0:0:0x009A
  Erase failed Block - 0:0:0x009C
  Erase failed Block - 0:0:0x009E
  Erase failed Block - 0:0:0x00A2
  Erase failed Block - 0:0:0x00A6
  Erase failed Block - 0:0:0x00AC
  Erase failed Block - 0:0:0x00B0
  Erase failed Block - 0:0:0x00B8
  Erase failed Block - 0:0:0x00BA
  Erase failed Block - 0:0:0x00BC
  Erase failed Block - 0:0:0x00BE
  Erase failed Block - 0:0:0x00C4
  Erase failed Block - 0:0:0x00C8
  Erase failed Block - 0:0:0x00CA
  Erase failed Block - 0:0:0x00CC
  Erase failed Block - 0:0:0x00CE
  Erase failed Block - 0:0:0x00D0
  Erase failed Block - 0:0:0x00D2
  Erase failed Block - 0:0:0x00D8
  Erase failed Block - 0:0:0x00DC
  Erase failed Block - 0:0:0x00DE
  Erase failed Block - 0:0:0x00E2
  Erase failed Block - 0:0:0x00E6
  Erase failed Block - 0:0:0x00F4
  Erase failed Block - 0:0:0x00F6
  Erase failed Block - 0:0:0x00F8
  Erase failed Block - 0:0:0x00FC
  Erase failed Block - 0:0:0x00FE
  Erase failed Block - 0:0:0x0104
  Erase failed Block - 0:0:0x010A
  Erase failed Block - 0:0:0x010C
  Erase failed Block - 0:0:0x0110
  Erase failed Block - 0:0:0x0120
  Erase failed Block - 0:0:0x0126
  Erase failed Block - 0:0:0x012A
  Erase failed Block - 0:0:0x012C
  Erase failed Block - 0:0:0x013C
  Erase failed Block - 0:0:0x0142
  Erase failed Block - 0:0:0x0152
  Erase failed Block - 0:0:0x0170
  Erase failed Block - 0:0:0x038E
  Erase failed Block - 0:0:0x0578
  Erase failed Block - 0:0:0x0579
  Erase failed Block - 0:0:0x057A
  Erase failed Block - 0:0:0x057B
  ---> Max Bad of Plane (47,2)
  ---> Max BAD/DIE = 47
Total good blocks after SCAN: 1355 / 1404, Bad block=49
==> 2-Plane mode
Max. Bad Block Allowed = 79(49)
Adjust Max LBA = 3913728, 3913664
MaxWindows=1/1274, MaxLBA=3913664, Size=1910 MB
Max BAD of one plane is 47 (39),1404,1,1
### Error: Low level format failed ###
SafeErase (0,1404)
  Erase failed Block - 0:0:0x0000
  Erase failed Block - 0:0:0x007E
  Erase failed Block - 0:0:0x0084
  Erase failed Block - 0:0:0x0098
  Erase failed Block - 0:0:0x009A
  Erase failed Block - 0:0:0x009C
  Erase failed Block - 0:0:0x009E
  Erase failed Block - 0:0:0x00A2
  Erase failed Block - 0:0:0x00A6
  Erase failed Block - 0:0:0x00AC
  Erase failed Block - 0:0:0x00B0
  Erase failed Block - 0:0:0x00B8
  Erase failed Block - 0:0:0x00BA
  Erase failed Block - 0:0:0x00BC
  Erase failed Block - 0:0:0x00BE
  Erase failed Block - 0:0:0x00C4
  Erase failed Block - 0:0:0x00C8
  Erase failed Block - 0:0:0x00CA
  Erase failed Block - 0:0:0x00CC
  Erase failed Block - 0:0:0x00CE
  Erase failed Block - 0:0:0x00D0
  Erase failed Block - 0:0:0x00D2
  Erase failed Block - 0:0:0x00D8
  Erase failed Block - 0:0:0x00DC
  Erase failed Block - 0:0:0x00DE
  Erase failed Block - 0:0:0x00E2
  Erase failed Block - 0:0:0x00E6
  Erase failed Block - 0:0:0x00F4
  Erase failed Block - 0:0:0x00F6
  Erase failed Block - 0:0:0x00F8
  Erase failed Block - 0:0:0x00FC
  Erase failed Block - 0:0:0x00FE
  Erase failed Block - 0:0:0x0104
  Erase failed Block - 0:0:0x010A
  Erase failed Block - 0:0:0x010C
  Erase failed Block - 0:0:0x0110
  Erase failed Block - 0:0:0x0120
  Erase failed Block - 0:0:0x0126
  Erase failed Block - 0:0:0x012A
  Erase failed Block - 0:0:0x012C
  Erase failed Block - 0:0:0x013C
  Erase failed Block - 0:0:0x0142
  Erase failed Block - 0:0:0x0152
  Erase failed Block - 0:0:0x0170
  Erase failed Block - 0:0:0x038E
  Erase failed Block - 0:0:0x0578
  Erase failed Block - 0:0:0x0579
  Erase failed Block - 0:0:0x057A
  Erase failed Block - 0:0:0x057B
  ---> Max Bad of Plane (47,2)
  ---> Max BAD/DIE = 47
Ending Time: 11:28:45

低级格式化失败？
只能选6691_Toshiba 43nm D3 Flash.INI恢复原始了。。。
是不是我这个u盘没法量产成USB-CDROM啊

jjsfm · 发表于 2011-5-19 15:30:18

尽管兼容性不好，但肯定可以量产成USB-CDROM，检查一下
（1）是不是XP系统？
（2）ini文件有没有添加“ID17=1”？
（3）改 INI 內的路径是否正确，文件路径及文件名是否简洁：
[CDROM]
CDROM_ISO=xxxxx

2011li3989721 · 发表于 2011-5-19 17:17:07

(1)是xp
(2)ini文件没有添加“ID17=1”
(3) INI內的路径正确,内容如下

[OEM]
PN=6691 + Toshiba 43nm D3 Normal Flash (CDROM)
Note=ISP:6691_B3-D3_20100210_VA20B00_F558.BIN

VID=0x0951
PID=0x1643
VENDOR_NAME="Kingston"
PRODUCT_NAME="DataTraveler G3"
STRING_DESC_ENABLE=1
SN_CustomerCode=0x0F

[FEATURE_SETTING]
FLASH_OP="ALL123"
ID35=1

[CDROM]
CDROM_ISO=D:\1.iso

[ISP]
Code=6691_B3-D3_20100210_VA20B00_F558.BIN

jjsfm · 发表于 2011-5-19 17:26:56

可添加“ID17=1”，先换到后面插孔再试试。

2011li3989721 · 发表于 2011-5-19 17:30:35

已添加ID17=1

[FEATURE_SETTING]
FLASH_OP="ALL123"
ID35=1
ID17=1

终于成功了，非常感谢老大的一直帮助！
原来默认的配置文件不行的？要添加ID17=1？

2011li3989721 · 发表于 2011-5-19 17:31:36

原来如此！
6691_Toshiba 43nm D3 Flash.INI默认是有ID17=1这个参数
而
6691_TSB_43nm_D3_CDROM.INI默认是没有ID17=1这个参数

		自动登录	找回密码
密码			注册