路过……

666

66.。支持大大

谢谢楼主的分享！

1.Yes,you can run the batch in win7/8/10.vhd,RAMOS loaded from bootmgr-grub4dos when boot under BIOS,it cannot boot by grub2,for grub2 doesn't  support map function in grub4dos,neither xorbootUEFI,it boot with Microsoft ramdisk.sys and primo disk driver under UEFI ,and it need to make a lot of junctions to run windows normally.   
2.3.8.3 batch support server2003/2012/2016/2019 chinese X64,I didn't test the English version windows system by my self.
3.You can have a look at the readme.txt in the directory.Brief production instructions

replyed by my telephone.  

liuzhaoyzz 发表于 2019-6-22 07:50
You can't put the 3.8.3 batch in dirve C:,because the batch will snap dirve C: to ramos.sna,ramo ...

thank you , it run fine from D:

2 questions please.

1- can i make a win 8.1x64  vhd from WINNTSETUP tool . boot from that VHD , and then make onekey RAMOS ? will i be able to boot that RAMOS from grub4dos and from grub2 (uefi )
  ????

2-  does this tool support server2012 x64


thank you so much

666.。支持大大

maanu 发表于 2019-6-22 06:29
Dear ,

thank you for keep updating , i finally got time to test. sorry for delay,

You can't put the 3.8.3 batch in dirve C:,because the batch will snap dirve C: to ramos.sna,ramos.sna and some wim files will be saved in the directory where the batch 3.8.3 lies.This maybe cause circle error.The batch don't exclude these files to keep compatible running from drive C:.

So I suggest that you can put the 3.8.3 batch in the drive which has the maximum free disk space.

liuzhaoyzz 发表于 2019-3-10 13:26
【RAMOS一键批处理多合一V3.8.0】在线制作P驱R驱F驱内存系统工具
1、据网友Amtfo030128、chenyingkeng、布 ...

Dear ,

thank you for keep updating , i finally got time to test. sorry for delay,

but i cant run batch file , i downloaded latest 3.8.3 english , right click on batch and run as admin , it give following line on batch file , and exit after few seconds,

" Please do not put batch into system drive! "

what could be the issue ?

大神们的无私奉献真的是让人感动，谢谢！

【RAMOS一键批处理多合一V3.8.0】在线制作P驱R驱F驱内存系统工具
1、据网友Amtfo030128、chenyingkeng、布衣等反馈，土豪模式启动失败，原因可能是启动镜像过大导致的，从该版本开始，傻瓜模式、土豪模式、WIMBOOT内存和硬盘模式、悠远模式启动镜像采用正向拷贝列表代替反向列表，从而减小启动镜像的体积到300MB以内（实际设置了启动镜像为512MB），也减少了制作时间，启动镜像列表主要来自虎大。该版本改动很大，需要广泛的测试。    ----感谢虎大2012wuzhong！
2、土豪模式的RAMOS_C盘大小调整为内存大小，注意土豪模式要求物理硬盘或者VHD磁盘总大小必须小于物理内存总量！这是因为Drive snapshot目前只支持从小分区向大分区热备份；从大分区向小分区克隆时，要求小分区总容量必须大于一定的存放空间，而且可能出现奇怪的问题。比如系统安装在VHD中，VHD总大小是30GB（已用空间以15GB为例），物理内存是32GB就可以用土豪模式，同时还要注意批处理所在的硬盘可用空间要足够大，比如15*3=45GB以上可用，做好后RAMOS_C盘是32GB。特别要注意的是一定要以管理员身份运行运行一键！一定要以管理员身份运行运行一键！一定要以管理员身份运行运行一键！另外对于64位系统，不要从第三方的32位的文件浏览器运行一键，因为32位的文件浏览器无法直接访问windows的某些文件夹和注册表文件，推荐从windows资源管理器中，右击以管理员身份运行运行一键！有些文件的读取写入权限超越了Nsudo所能达到的范围。 ----感谢real456的反馈！
3、①改进RPIO、RPCP虚拟内存方案避免关机蓝屏问题。运行RPIO、RPCP方案之后，原系统的primo内存盘要删除必须先在关闭primo内存盘的虚拟内存才行，我的电脑→右击属性→高级系统设置→高级标签→设置→高级→选中无分页文件→设置并确定，然后正常重启，重启后即可删除内存盘，删除之后最好重启一次，否则可能会影响其他模式制作。②给出微软Ramdisk内存盘推荐值范围，并可手工输入数值，32位的一般400-900MB，64位的一般800-3200MB。③改进RPIO、RP COMPACT方案（包括MBR和UEFI）下的启动镜像列表，放弃原有的win.ini、win1.ini方案，采用win2.ini方案减小捕捉范围，避免启动镜像过大无法启动的问题；在启动镜像中建立除了aaa.txt列表目录之外其他一级目录的软链接。④因为不同的电脑system32、syswow64、fonts目录下的文件各种各样，因此放弃bbb.txt文件链接列表，直接用批处理代码在线实时提取代替，若文件存在则自动跳过。⑤调整ccc.txt中的删除启动镜像列表，增强稳定性。但UEFI下这些基于Ramdisk驱动的的方案仍然存在WIN8/10下开始菜单的一些遗留问题待解决。该版本改动很大，需要广泛的测试。    ----by心心相印！
4、更新热备份程序rc.cmd，确保注册表设置生效。
5、除了用powercfg -h off命令，还尝试使用注册表来关闭休眠，避免Hiberfil.sys带入RAMOS中。----感谢yamingw
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Power]
"HibernateEnabled"=dword:00000000
6、wimlib采用最新版的1.13.0来自https://wimlib.net/，该版本官方说解决了当[ExclusionList]字段有匹配通配符文件时，[ExclusionException]强制保留绝对路径不生效的问题。
7、在建盘、删盘的时候增加延迟，确保制作稳定不蓝屏（官方后续版本也修正了这个bug）。
8、删除在桌面创建PCBackup.cmd的语句。
9、各个界面下均给出推荐制作的模式，推荐的模式不再单纯看测速指标，更重要的是兼顾兼容性和稳定性，不再推崇Direct-IO模式，因为这种模式Romex官方介绍就不如SCSI模式稳定，还有软链接带来的不稳定性。

Change logs:
1KRAMOS3.8.0-English
1, according to Amtfo030128, chenyingkeng, buyi and other feedback, the rich mode failed to start, the reason may be caused by the boot image is too large, from this version, fool mode, local mode, WIMBOOT memory and hard disk mode, distant mode boot image is positive Replacing the reverse list with the copy list, thereby reducing the size of the boot image to less than 300MB (the actual setting of the boot image is 512MB), and also reducing the production time. The boot image list is mainly from 2012wuzhong. This version has changed a lot and requires extensive testing. ----Thanks to 2012wuzhong!
2, the rich mode RAMOS_C disk size is adjusted to the memory size, pay attention to the rich mode requires the physical hard disk or VHD disk total size must be less than the total amount of physical memory! This is because Drive snapshot currently only supports hot backup from small partition to large partition; when cloning from large partition to small partition, the total capacity of small partition must be larger than a certain storage space, and strange problems may occur. For example, the system is installed in the VHD, the total size of the VHD is 30GB (the used space is 15GB), the physical memory is 32GB, you can use the local mode, and also pay attention to the available space of the hard disk is large enough, such as 15* 3=45GB or more is available, after the RAMOS_C disk is 32GB. Special attention must be made to run as a administrator! Be sure to run as a administrator privilege! Be sure to run as a administrator privilege!Be sure to run as a administrator privilege! Also for 64-bit systems, don't run the batch from a third-party 32-bit file browser, because 32-bit file browsers don't have direct access to certain windows and registry files, recommended from Windows Explorer. The read and write permissions of some files go beyond the ability of Nsudo. ---- Thanks for the feedback of real456!
3,(1) improve RPIO, RPCP virtual memory scheme to avoid shutdown blue screen problem. After running the RPIO and RPCP schemes, the primo memory disk of the original system must be deleted before the virtual memory of the primo memory disk is closed. My computer→right-click Properties→Advanced System Settings→Advanced Tab→Settings→Advanced→Select No Pagination File → set and confirm, then restart normally, you can delete the memory disk after rebooting, it is best to restart once after deletion, otherwise it may affect other mode production. (2)gives the recommended range of Microsoft Ramdisk memory disk, and can manually enter the value, 32-bit general 400-900MB, 64-bit general 800-3200MB. (3)Improve the list of boot images under RPIO and RP COMPACT schemes (including MBR and UEFI), abandon the original win.ini and win1.ini schemes, use win2.ini scheme to reduce the capture range, and avoid starting mirrors that are too large to start. Problem; create a soft link to the first level directory in addition to the aaa.txt list directory in the boot image. (4)Because different computers have various files in the system32, syswow64, and fonts directories, so the bbb.txt file link list is discarded, and the batch code is directly used for online real-time extraction instead, and if the file exists, it is automatically skipped. (5)Adjust the list of deleted boot images in ccc.txt to enhance stability. However, these Ramdisk-based solutions under UEFI still have some remaining problems to be solved under the WIN8/10 start menu. This version has changed a lot and requires extensive testing. ----by liuzhaoyzz!
4. Update the hot backup program rc.cmd to ensure that the registry settings take effect.
5, in addition to using the powercfg -h off command, also try to use the registry to shut down hibernation, to avoid Hiberfil.sys brought into RAMOS. ----Thank yamingw
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Power]
"HibernateEnabled"=dword:00000000
6, Wimlib uses the latest version of 1.13.0 from https://wimlib.net/, which officially said that when the [ExclusionList] field has a matching wildcard file, [ExclusionException] forces the absolute path to be invalid.
7, increase the delay in the construction of the disk, delete the disk, to ensure that the production is not stable blue screen (the official follow-up version also corrected this bug).
8. Delete the statement that creates PCBackup.cmd on the desktop.
9. The recommended production mode is given under each interface. The recommended mode is no longer simply to look at the speed measurement index, but more importantly, compatibility and stability are not considered. The Direct-IO mode is no longer recommended, because this mode is officially introduced by Romex. Not as stable as the SCSI mode, but also the instability caused by soft links.
10.Modify GUID code in bcd.

2012mshs 发表于 2018-10-9 14:06
I was try again with new update. It work ok. No error. Thank you so much!!!!

    Glad to hear that! Congratulations！

liuzhaoyzz 发表于 2018-10-5 17:48
Please  download it again,I have already updated it.

I was try again with new update. It work ok. No error. Thank you so much!!!!

liuzhaoyzz 发表于 2018-10-6 10:26
No,the batch was encoded in ANSI.In new version,I have fixed  Snapshot driver signature error,I m ...

Next week, I will test new version. Here info about snapshot error in older version

21:29:35 Start of Snapshot 1.46.18041 [Mar 23 2018] at 9/30/2018
21:29:35 Running on Windows 7 Ultimate 64-bit Service Pack 1 (7601)
21:29:35 Memory Info: Total: 8092Mb, Free: 7193Mb, Pagefile total: 10154Mb, Pagefile free: 8693Mb
21:29:35 Command line: D:\RAMOS320\Tool\snapshot.exe  D:\ramos.sna W: -VQ
21:29:35 ***********************************************************
21:29:35 Snapshot error NTVDISK, line 3240
21:29:35 no valid volume file D:\ramos.sna
21:29:35 last Windows Error: 2-The system cannot find the file specified.
21:29:35 ***********************************************************
21:29:35 Error occurred - exitcode 1

   No,the batch was encoded in ANSI.In new version,I have fixed  Snapshot driver signature error,I made RAMOS OK in WIN7X64.
Can you upload the screenshot of snapshot error?

liuzhaoyzz 发表于 2018-10-6 09:57
Yes,it is.

Maybe, the BAT file was encode in unicode. Snapshot driver error cause by my Win7x64 lite don't have Windows6.1-KB3033929-x64. I can't run direct Snapshot with NSUDO.

     Yes,it is.

2012mshs 发表于 2018-10-5 17:38
Snapshots herr

Change system locate from here. It will display command line in chinese language

爱慕内存系统……一定超快吧？

            Please  download it again,I have already updated it.  

Snapshots herr

DAY DAY UP !

2012mshs 发表于 2018-10-4 23:03
In 64bit, do not install any one, do not change locate. RAMOS don't work. I try change system locate ...

Please take  a look at the 2# post.
Download 1KRAMOS3.7.3 from 1# post again. I test OK under United States region,WIN7ENX64.
http://bbs.wuyou.net/forum.php?m ... &fromuid=298214

        start→run→cmd→echo %date%  
,echo %time% ,upload the snapshot,I will fix it tomorrow.      

利害了，我的双心

In 64bit, do not install any one, do not change locate. RAMOS don't work. I try change system locate, RAMOS work but snapshot error.

liuzhaoyzz 发表于 2018-10-4 22:03
32bit RAMOS is slower than 64bit RAMOS ,indeed.

Must change system locate for RAMOS work?

Thank you so much. I will with 64 bit system (before RAMOS can not work)

   32bit RAMOS is slower than 64bit RAMOS ,indeed.

Must change system locate for RAMOS work?
NO,maybe locate in America will work,too.But I didn't try.
Changing the system location is just to avoid messy code in the readme.txt.
It was wrote by Chinese character encoding.   

厉害了我的哥，前排支持

Work ok in my system (32 bit). But speed seems slower than 64 bit. Must change system locate for RAMOS work?