玄天PE[完美支持声显网无线]

玄天

仅用PE3核心的时间更多些,DG自然要内置了

snbxeon

原帖由 玄天 于 2011-5-6 16:14 发表
仅用PE3核心的时间更多些,DG自然要内置了

你的pe我只用pe3了。内置外置都全换了。

还想问一声，外置有打算更新下吗？

buger

0505的版本打开图片照片浏览器提示文件损坏?图标预览正常。

玄天

外置还是自己去折腾吧,我也没那么多时间....

玄天

原帖由 buger 于 2011-5-6 16:49 发表
0505的版本打开图片照片浏览器提示文件损坏?图标预览正常。

应该不会吧?
如果真有问题也该说明下图片格式嘛

snbxeon

原帖由 玄天 于 2011-5-6 17:10 发表
外置还是自己去折腾吧,我也没那么多时间....

好，自己动手吧。

snbxeon

原帖由 buger 于 2011-5-6 16:49 发表
0505的版本打开图片照片浏览器提示文件损坏?图标预览正常。

试了一下，内置的图片浏览器打开jpg的文件无问题。

buger

图片浏览器没问题，应该是我测试显卡驱动时改错注册表了。图标变白的现象还是有。

jianliulin

请问大家能在玄天0427或0505系统下使用dism.exe 对玄天winre.wim部署驱动吗？我的老出现 错误：87 ，同样的命令在安装版下可以；命令如下：
dism /mount-wim /wimfile:C:\WINRE.wim /index:1 /mountdir:C:\Servicing
pause
dism /image:C:\Servicing /add-driver /driver:C:\ASUS\atims\atiilhag.inf
dism /image:C:\Servicing /add-driver /driver:C:\ASUS\ATK0100\atkacpi.inf
dism /image:C:\Servicing /add-driver /driver:C:\ASUS\Modem\agrsm.inf
dism /image:C:\Servicing /add-driver /driver:C:\ASUS\RicohMemoryr\rimsptsk.inf
dism /image:C:\Servicing /add-driver /driver:C:\ASUS\SD\rimmptsk.inf
dism /image:C:\Servicing /add-driver /driver:C:\ASUS\SD\sdbus.inf
dism /image:C:\Servicing /add-driver /driver:C:\ASUS\SD\sffdisk.inf
dism /image:C:\Servicing /add-driver /driver:C:\ASUS\XD\rixdptsk.inf
dism /unmount-wim /mountdir:C:\Servicing /commit
pause

tzxinqing

不断更新，不断完美，谢谢更新

2010meirenailia

更新到5月5号的系统。可是打不开 我的 “系统垃圾清理工具-Wywz.exe"这个带EXE后缀的软件，之前版本都能够打开的，老大帮忙弄哈。谢谢了！

lcy163

原帖由 jianliulin 于 2011-5-6 21:58 发表
请问大家能在玄天0427或0505系统下使用dism.exe 对玄天winre.wim部署驱动吗？我的老出现 错误：87 ，同样的命令在安装版下可以；命令如下：
dism /mount-wim /wimfile:C:\WINRE.wim /index:1 /mountdir:C:\Ser ...

你的3到10行删除变成这样一行就可以了
Dism /Image:C:\Servicing /Add-Driver /Driver:C:\ASUS /Recurse /ForceUnsigned

[ 本帖最后由 lcy163 于 2011-5-7 11:37 编辑 ]

jianliulin

原帖由 lcy163 于 2011-5-7 11:36 发表


你的3到10行删除变成这样一行就可以了
Dism /Image:C:\Servicing /Add-Driver /Driver:C:\ASUS /Recurse /ForceUnsigned

1.第一行就出问题了，而在完整版的win7上面的批处理是成功运行的


2.有些驱动要分先后顺序，不然安装不上

[ 本帖最后由 jianliulin 于 2011-5-7 13:14 编辑 ]

andos

原帖由 jianliulin 于 2011-5-7 12:53 发表


1.第一行就出问题了，而在完整版的win7上面的批处理是成功运行的
120619

2.有些驱动要分先后顺序，不然安装不上

看看DISM.log 内详细的信息吧

玄天

原帖由 lcy163 于 2011-5-7 11:36 发表


你的3到10行删除变成这样一行就可以了
Dism /Image:C:\Servicing /Add-Driver /Driver:C:\ASUS /Recurse /ForceUnsigned

首先搞清楚挂载路径,路径权限再说其它的....

jianliulin

玄天兄，我又到了其他的win7pe下测试，在什么都没有改变的情况下，可以挂wim 并部署驱动，由此初步怀疑可能是你的pe精简了dism必须的文件。

[ 本帖最后由 jianliulin 于 2011-5-7 14:05 编辑 ]

jianliulin

原帖由 andos 于 2011-5-7 13:54 发表

看看DISM.log 内详细的信息吧

以下是log ，附件是dism.log
07 14:06:22, Info                  DISM   PID=112 Scratch directory set to 'F:\TEMP\'. - CDISMManager::put_ScratchDir
2011-05-07 14:06:22, Info                  DISM   PID=112 Successfully loaded the ImageSession at "X:\Windows\System32\Dism" - CDISMManager::LoadImageSession
2011-05-07 14:06:22, Info                  DISM   DISM Provider Store: PID=112 Found and Initialized the DISM Logger. - CDISMProviderStore::Internal_InitializeLogger
2011-05-07 14:06:22, Info                  DISM   DISM Provider Store: PID=112 Failed to get and initialize the PE Provider.  Continuing by assuming that it is not a WinPE image. - CDISMProviderStore::Final_OnConnect
2011-05-07 14:06:22, Info                  DISM   DISM Provider Store: PID=112 Finished initializing the Provider Map. - CDISMProviderStore::Final_OnConnect
2011-05-07 14:06:22, Info                  DISM   DISM Provider Store: PID=112 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2011-05-07 14:06:22, Info                  DISM   DISM Provider Store: PID=112 Provider has previously been initialized.  Returning the existing instance. - CDISMProviderStore::Internal_GetProvider
2011-05-07 14:06:22, Info                  DISM   DISM Provider Store: PID=112 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2011-05-07 14:06:22, Info                  DISM   DISM Provider Store: PID=112 Provider has previously been initialized.  Returning the existing instance. - CDISMProviderStore::Internal_GetProvider
2011-05-07 14:06:22, Info                  DISM   DISM Manager: PID=112 Successfully created the local image session and provider store. - CDISMManager::CreateLocalImageSession
2011-05-07 14:06:22, Info                  DISM   DISM Provider Store: PID=112 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2011-05-07 14:06:22, Info                  DISM   DISM Provider Store: PID=112 Provider has previously been initialized.  Returning the existing instance. - CDISMProviderStore::Internal_GetProvider
2011-05-07 14:06:22, Info                  DISM   DISM.EXE:
2011-05-07 14:06:22, Info                  DISM   DISM.EXE: <----- Starting Dism.exe session ----->
2011-05-07 14:06:22, Info                  DISM   DISM.EXE:
2011-05-07 14:06:22, Info                  DISM   DISM.EXE: Host machine information: OS Version=6.1.7600, Running architecture=x86, Number of processors=2
2011-05-07 14:06:22, Info                  DISM   DISM.EXE: Executing command line: dism  /mount-wim /wimfile:C:\WINRE.wim /index:1 /mountdir:C:\Servicing
2011-05-07 14:06:22, Info                  DISM   DISM Provider Store: PID=112 Getting the collection of providers from a local provider store type. - CDISMProviderStore::GetProviderCollection
2011-05-07 14:06:22, Info                  DISM   DISM Provider Store: PID=112 Provider has not previously been encountered.  Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
2011-05-07 14:06:22, Info                  DISM   DISM Provider Store: PID=112 Loading Provider from location X:\Windows\System32\Dism\WimProvider.dll - CDISMProviderStore::Internal_GetProvider
2011-05-07 14:06:22, Warning               DISM   DISM Provider Store: PID=112 There is a possible version mismatch between the provider and one of its dependencies. - CDISMProviderStore::Internal_LoadProvider(hr:0x8007007f)
2011-05-07 14:06:22, Warning               DISM   DISM Provider Store: PID=112 Failed to Load the provider: X:\Windows\System32\Dism\WimProvider.dll. - CDISMProviderStore::Internal_GetProvider(hr:0x8007007f)
2011-05-07 14:06:22, Info                  DISM   DISM Provider Store: PID=112 Provider has not previously been encountered.  Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
2011-05-07 14:06:22, Info                  DISM   DISM Provider Store: PID=112 Loading Provider from location X:\Windows\System32\Dism\FolderProvider.dll - CDISMProviderStore::Internal_GetProvider
2011-05-07 14:06:22, Info                  DISM   DISM Provider Store: PID=112 Connecting to the provider located at X:\Windows\System32\Dism\FolderProvider.dll. - CDISMProviderStore::Internal_LoadProvider
2011-05-07 14:06:22, Info                  DISM   DISM Provider Store: PID=112 Provider has not previously been encountered.  Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
2011-05-07 14:06:22, Info                  DISM   DISM Provider Store: PID=112 Loading Provider from location X:\Windows\System32\Dism\CompatProvider.dll - CDISMProviderStore::Internal_GetProvider
2011-05-07 14:06:22, Info                  DISM   DISM Provider Store: PID=112 Connecting to the provider located at X:\Windows\System32\Dism\CompatProvider.dll. - CDISMProviderStore::Internal_LoadProvider
2011-05-07 14:06:22, Info                  DISM   DISM.EXE: Got the collection of providers. Now enumerating them to build the command table.
2011-05-07 14:06:22, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: FolderManager
2011-05-07 14:06:22, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DISM Log Provider
2011-05-07 14:06:22, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: Compatibility Manager
2011-05-07 14:06:22, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: Compatibility Manager.
2011-05-07 14:06:22, Warning               DISM   DISM.EXE: Failed to load WimManager. Try running from the Deployment Tools Command Prompt. If the issue persists, ensure that wimgapi.dll and wimserv.exe are up to date.
2011-05-07 14:06:22, Warning               DISM   DISM.EXE: Failed to add any commands.
2011-05-07 14:06:22, Error                 DISM   DISM.EXE: No providers were found that support the command(mount-wim). HRESULT=0
2011-05-07 14:06:22, Info                  DISM   DISM.EXE: Image session has been closed. Reboot required=no.
2011-05-07 14:06:22, Info                  DISM   DISM.EXE:
2011-05-07 14:06:22, Info                  DISM   DISM.EXE: <----- Ending Dism.exe session ----->
2011-05-07 14:06:22, Info                  DISM   DISM.EXE:
2011-05-07 14:06:22, Info                  DISM   DISM Image Session: PID=112 Disconnecting the provider store - CDISMImageSession::Final_OnDisconnect
2011-05-07 14:06:22, Info                  DISM   DISM Provider Store: PID=112 Disconnecting Provider: FolderManager - CDISMProviderStore::Internal_DisconnectProvider
2011-05-07 14:06:22, Info                  DISM   DISM Provider Store: PID=112 Found the OSServices.  Waiting to finalize it until all other providers are unloaded. - CDISMProviderStore::Final_OnDisconnect
2011-05-07 14:06:22, Info                  DISM   DISM Provider Store: PID=112 Disconnecting Provider: Compatibility Manager - CDISMProviderStore::Internal_DisconnectProvider
2011-05-07 14:06:22, Info                  DISM   DISM Provider Store: PID=112 Releasing the local reference to DISMLogger.  Stop logging. - CDISMProviderStore::Internal_DisconnectProvider

[ 本帖最后由 jianliulin 于 2011-5-7 14:21 编辑 ]

玄天

可能是目录的问题,挂载是多加一级路径试试,dism功能本身是没有问题的

jianliulin

原帖由 玄天 于 2011-5-7 17:05 发表
可能是目录的问题,挂载是多加一级路径试试,dism功能本身是没有问题的

加了还是一样挂不了

zhangze

加了ipx协议真好
可惜啊
这个pe最大连接数只是20啊

jianliulin

原帖由 zhangze 于 2011-5-7 18:54 发表
加了ipx协议真好
可惜啊
这个pe最大连接数只是20啊

自从加了ipx后我用此pe玩星际了，哈哈

2010zjh

怎么这么快就沉了，顶起

drfed1122

请修复哈chm没有权限打开,远程桌面没法连接windows 2008 server的问题,谢谢

elai

原帖由 drfed1122 于 2011-5-9 11:43 发表
请修复哈chm没有权限打开,远程桌面没法连接windows 2008 server的问题,谢谢

貌似自己注册一下SYSTEM32下的hhctrl.ocx或在PECMD.INI中将//FORX %WinDir%\System32\*.ocx,Regocx,0,CALL $%Regocx%前的//去掉 ，.CHM打开就没问题了！

tzxinqing

前来支持一下..........

2011xiaobing

也来支持一下..........

希望解决Dism和PXE启动问题

legendvip

我用最新版蓝屏 D1    ..ndis.sys这个驱动好像

snbxeon

原帖由 legendvip 于 2011-5-12 02:16 发表
我用最新版蓝屏 D1    ..ndis.sys这个驱动好像

你用的是什么主板呢，0505版我测试了很多台机器了，没有什么大问题呀。

chwjqk

玄天老师 我现在正在使用 20110505 版本的PE，很好用，谢谢，但其中DOS7.10不能引导，我是装在移动硬盘上使用的。10G硬盘，只有一个NTFS分区，试了几台机器，都不行，错误提示如下
boot from the cd/dvd disk failed!
press any key to reboot...

[...................]80A00079

望指点一下，谢谢

tzxinqing

前来支持一下..........