2012apple3000 发表于 2013-8-22 16:49
But Until Desktop, It Takes a long Time. 2 minute.. Why it is... I Dont Know.
i`m trying to find why RUN did`t work... i have no idea about why need so long time before desktop, but maybe you can try to modify the menu like below, no ",boot"
my reply was also deleted by the BBS, and just recovered... i do not know why...
so now it`s working fine? do not need too long time to see the desktop?
详情回复
发表于 2013-8-23 17:09
sratlf 发表于 2013-8-23 17:09
my reply was also deleted by the BBS, and just recovered... i do not know why...
so now it`s wo ...
Yes , It;s working fine. It did not need too long time to see the desktop.
vhd normally booted and fast.
Non-Sysprep XP Image worked Fine. Good.
But I didnt try "write (99) [FiraDisk]\nStartOptions=disk,vmem=find:/winxp.vhd;\n\0"
I will try that.
and Today I tried to Make vhd using SYSPREP XP Ghost-Image.
1 restore sysprep xp to VHD.
2 inject firadisk driver to VHD.
3 boot from Grub menu.
MY Bios is AHCI Mode.
Boot First, I saw XP logo and progressBar for a long time.
So I was contemplating whether or not to shutdown PC ^^.
but I Wait. Then sysprep setup was started. Inner EasyDriver Tool worked and installed driver.
Boot Second, I Saw xp logo and progressBar for a long time ,too.
But eternally . ㅠㅠ.
I turned off my PC. Tried again. Same problem..
I went to Home.
Yes , It;s working fine. It did not need too long time to see the desktop.
vhd normally booted and fast.
Non-Sysprep XP Image worked Fine. Good.
But I didnt try "write (99) [FiraDisk]\nStartOptions=disk,vmem=find:/winxp.vhd;\n\0"
I will try that.
and Today I tried to Make vhd using SYSPREP XP Ghost-Image.
1 restore sysprep xp to VHD.
2 inject firadisk driver to VHD.
3 boot from Grub menu.
MY Bios is AHCI Mode.
Boot First, I saw XP logo and progressBar for a long time.
So I was contemplating whether or not to shutdown PC ^^.
but I Wait. Then sysprep setup was started. Inner EasyDriver Tool worked and installed driver.
Boot Second, I Saw xp logo and progressBar for a long time ,too.
But eternally . ㅠㅠ.
I turned off my PC. Tried again. Same problem..
I went to Home.
sratlf 发表于 2013-8-23 17:09
my reply was also deleted by the BBS, and just recovered... i do not know why...
so now it`s wo ...
Yes , It;s working fine. It did not need too long time to see the desktop.
vhd normally booted and fast.
Non-Sysprep XP Image worked Fine. Good.
But I didnt try "write (99) [FiraDisk]\nStartOptions=disk,vmem=find:/winxp.vhd;\n\0"
I will try that.
and Today I tried to Make vhd using SYSPREP XP Ghost-Image.
1 restore sysprep xp to VHD.
2 inject firadisk driver to VHD.
3 boot from Grub menu.
MY Bios is AHCI Mode.
Boot First, I saw XP logo and progressBar for a long time.
So I was contemplating whether or not to shutdown PC ^^.
but I Wait. Then sysprep setup was started. Inner EasyDriver Tool worked and installed driver.
Boot Second, I Saw xp logo and progressBar for a long time ,too.
But eternally . ㅠㅠ.
I turned off my PC. Tried again. Same problem..
I went to Home.
Yes , It;s working fine. It did not need too long time to see the desktop.
vhd normally booted and fast.
Non-Sysprep XP Image worked Fine. Good.
But I didnt try "write (99) [FiraDisk]\nStartOptions=disk,vmem=find:/winxp.vhd;\n\0"
I will try that.
and Today I tried to Make vhd using SYSPREP XP Ghost-Image.
1 restore sysprep xp to VHD.
2 inject firadisk driver to VHD.
3 boot from Grub menu.
MY Bios is AHCI Mode.
Boot First, I saw XP logo and progressBar for a long time.
So I was contemplating whether or not to shutdown PC ^^.
but I Wait. Then sysprep setup was started. Inner EasyDriver Tool worked and installed driver.
Boot Second, I Saw xp logo and progressBar for a long time ,too.
But eternally . ㅠㅠ.
I turned off my PC. Tried again. Same problem..
I went to Home.
Why was my article deleted by the bbs. I wrote same article several time because it was deleted time to time.
After several menute, I confirmed that my article was deleted.
Yes , It;s working fine. It did not need too long time to see the desktop.
vhd normally booted and fast.
Non-Sysprep XP Image worked Fine. Good.
But I didnt try "write (99) [FiraDisk]\nStartOptions=disk,vmem=find:/winxp.vhd;\n\0"
I will try that.
and Today I tried to Make vhd using SYSPREP XP Ghost-Image.
1 restore sysprep xp to VHD.
2 inject firadisk driver to VHD.
3 boot from Grub menu.
MY Bios is AHCI Mode.
Boot First, I saw XP logo and progressBar for a long time.
So I was contemplating whether or not to shutdown PC ^^.
but I Wait. Then sysprep setup was started. Inner EasyDriver Tool worked and installed driver.
Boot Second, I Saw xp logo and progressBar for a long time ,too.
But eternally . ㅠㅠ.
I turned off my PC. Tried again. Same problem..
I went to Home.
Why was my article deleted by the bbs. I wrote same article several time because it was deleted time to time.
After several menute, I confirmed that my article was deleted.
Yes , It;s working fine. It did not need too long time to see the desktop.
vhd normally booted and fast.
Non-Sysprep XP Image worked Fine. Good.
But I didnt try "write (99) [FiraDisk]\nStartOptions=disk,vmem=find:/winxp.vhd;\n\0"
I will try that.
and Today I tried to Make vhd using SYSPREP XP Ghost-Image.
1 restore sysprep xp to VHD.
2 inject firadisk driver to VHD.
3 boot from Grub menu.
MY Bios is AHCI Mode.
Boot First, I saw XP logo and progressBar for a long time.
So I was contemplating whether or not to shutdown PC.
but I Wait. Then sysprep setup was started. Inner EasyDriver Tool worked and installed driver.
Boot Second, I Saw xp logo and progressBar for a long time ,too.
But eternally . .
I turned off my PC. Tried again. Same problem..
I went to Home.
sratlf 发表于 2013-8-23 17:09
my reply was also deleted by the BBS, and just recovered... i do not know why...
so now it`s wo ...
Why was my article deleted by the bbs. I wrote same article several time because it was deleted time to time.
After several menute, I confirmed that my article was deleted.
Yes , It;s working fine. It did not need too long time to see the desktop.
vhd normally booted and fast.
Non-Sysprep XP Image worked Fine. Good.
But I didnt try "write (99) [FiraDisk]\nStartOptions=disk,vmem=find:/winxp.vhd;\n\0"
I will try that.
and Today I tried to Make vhd using SYSPREP XP Ghost-Image.
1 restore sysprep xp to VHD.
2 inject firadisk driver to VHD.
3 boot from Grub menu.
MY Bios is AHCI Mode.
Boot First, I saw XP logo and progressBar for a long time.
So I was contemplating whether or not to shutdown PC.
but I Wait. Then sysprep setup was started. Inner EasyDriver Tool worked and installed driver.
Boot Second, I Saw xp logo and progressBar for a long time ,too.
But eternally ..
I turned off my PC. Tried again. Same problem..
I went to Home.
Why was my article deleted by the bbs. I wrote same article several time because it was deleted time to time.
After several menute, I confirmed that my article was deleted.
So, I rejoined this bbs.
Yes , It;s working fine. It did not need too long time to see the desktop.
vhd normally booted and fast.
Non-Sysprep XP Image worked Fine. Good.
But I didnt try "write (99) [FiraDisk]\nStartOptions=disk,vmem=find:/winxp.vhd;\n\0"
I will try that.
and Today I tried to Make vhd using SYSPREP XP Ghost-Image.
1 restore sysprep xp to VHD.
2 inject firadisk driver to VHD.
3 boot from Grub menu.
MY Bios is AHCI Mode.
Boot First, I saw XP logo and progressBar for a long time.
So I was contemplating whether or not to shutdown PC.
but I Wait. Then sysprep setup was started. Inner EasyDriver Tool worked and installed driver.
Boot Second, I Saw xp logo and progressBar for a long time ,too.
But eternally ..
I turned off my PC. Tried again. Same problem..
I went to Home.
hi, sorry for the late reply, just busy with other things and have little time to view bbs.
your articles all have been recovered, i also have no idea for why bbs deleted these automatically...
fo
详情回复
发表于 2013-9-2 10:18
hi, sorry for the late reply, just busy with other things and have little time to view bbs.
your articles all have been recovered, i also have no idea for why bbs deleted these automatically...
for the long time spent on the progress bar, it`s due to some unknown issue caused by firadisk driver.
you can try both "...find:/winxp.vhd;\n\0" and "...find:/winxp.vhd,boot;\n\0", maybe someone working, do not need to wait so long time.
attachment is RUN script using "...find:/winxp.vhd,boot;\n\0" when booting winxp.vhd, you can also have a try, good luck.
how to do this?
I tried several times, but was Not mounted.
syntax,
run --fira /8PE.ISO
run --mem --fira /8PE.ISO
..
..
..
not mounted.
So If you possible, At next version , I hope now you reflect this method.
run --cd /8PE.ISO (directly boot and virtual CD-ROM)
run --mem --cd /8PE.ISO (loading to RAM and virtual CD-ROM)
or with any --para..
Thank you.
So, I write again
-------------------------------------------
Long time no see. have you ever been fine?
Thanks for your help always.
When I boot 7PE or 8PE.iso, I found this.
This is that If PE included firadisk driver, PE is automatically mounted to Virtual CD-ROM after booting.
First, PE has firadisk service As service SYSTEM-registry and system32\drivers\firadisk.sys.
Second, Use following grub syntax.
how to do this?
I tried several times, but was Not mounted.
syntax,
run --fira /8PE.ISO
run --mem --fira /8PE.ISO
..
..
..
not mounted.
So If you possible, At next version , I hope now you reflect this method.
run --cd /8PE.ISO (directly boot and virtual CD-ROM)
run --mem --cd /8PE.ISO (loading to RAM and virtual CD-ROM)
or with any --para..
Thank you.
yeah, many things happened and now back to normal, it`s good, thanks :)
for the iso file mapping, that is a good suggestion, let me try to achieve it in next version.
详情回复
发表于 2013-12-5 23:29