国产开源U盘启动工具——Ventoy 【2024/05/19 1.0.98 版本发布】

qingyi78

老大，如果没有明显证据证明安全启动会导致资料丢失，建议默认启用。可以给小白一个教程，因为过安全启动的那个界面真的挺吓人的，全英文。字还特别小。

lzy157

这样省事多了，谢谢楼主分享。

2010anweinuo

功能不错，试用看看，支持一下！

chinaren12

无忧真是各路大神聚集呀，支持下，非常好的工具

2012charove

[2020/05/28 12:11:58.028]
################################ Ventoy2Disk 1.0.0.2 ################################
[2020/05/28 12:11:58.030] Control Flag: 0 1 1
[2020/05/28 12:11:58.030] Windows Version : Windows 10 64-bit (Build 17763)
[2020/05/28 12:11:58.030] RegOpenKeyExA <SYSTEM\CurrentControlSet\Services\disk\Enum> Ret:0
[2020/05/28 12:11:58.031] RegQueryValueExA <Count> ret:0  Size:4 Value:2
[2020/05/28 12:11:58.031] GetPhysicalDriveCount: 2
[2020/05/28 12:11:58.031] Logical Drives: 0x14
[2020/05/28 12:11:58.032] LogicalDrive:\\.\C: PhyDrive:0 Offset:2097152 ExtentLength:250056015872
[2020/05/28 12:11:58.032] C --> 0
[2020/05/28 12:11:58.033] LogicalDrive:\\.\E: PhyDrive:1 Offset:0 ExtentLength:16149076992
[2020/05/28 12:11:58.033] E --> 1
[2020/05/28 12:11:58.034] Create file Handle:00000190 \\.\PhysicalDrive0 status:0
[2020/05/28 12:11:58.034] PHYSICALDRIVE0 size 250059350016 bytes
[2020/05/28 12:11:58.035] Create file Handle:00000190 \\.\PhysicalDrive1 status:0
[2020/05/28 12:11:58.036] PHYSICALDRIVE1 size 16149076992 bytes
[2020/05/28 12:11:58.037] PhyDrv:0 BusType:SATA Removable:0 Size:256GB(250059350016) Name: HP SSD S700 250GB
[2020/05/28 12:11:58.037] PhyDrv:1 BusType:USB  Removable:1 Size:16GB(16149076992) Name: UFD
[2020/05/28 12:11:58.037] LogicalDrive:\\.\C: PhyDrive:0 Offset:2097152 ExtentLength:250056015872
[2020/05/28 12:11:58.037] Logical Drive:C  ===> PhyDrive:0
[2020/05/28 12:11:58.038] LogicalDrive:\\.\E: PhyDrive:1 Offset:0 ExtentLength:16149076992
[2020/05/28 12:11:58.038] Logical Drive:E  ===> PhyDrive:1
[2020/05/28 12:11:58.038] < HP SSD S700 250GB> is filtered for not USB type.
[2020/05/28 12:11:58.039] Create file Handle:00000190 \\.\PhysicalDrive1 status:0
[2020/05/28 12:11:58.040] Read MBR Ret:1 Size:512 code:183
[2020/05/28 12:11:58.040] =========== Partition Table 1 ============
[2020/05/28 12:11:58.041] PartTbl.Active = 0x6f
[2020/05/28 12:11:58.041] PartTbl.FsFlag = 0x72
[2020/05/28 12:11:58.041] PartTbl.StartSectorId = 778135908
[2020/05/28 12:11:58.042] PartTbl.SectorCount = 1141509631
[2020/05/28 12:11:58.042] PartTbl.StartHead = 116
[2020/05/28 12:11:58.042] PartTbl.StartSector = 40
[2020/05/28 12:11:58.042] PartTbl.StartCylinder = 405
[2020/05/28 12:11:58.042] PartTbl.EndHead = 32
[2020/05/28 12:11:58.043] PartTbl.EndSector = 45
[2020/05/28 12:11:58.043] PartTbl.EndCylinder = 405
[2020/05/28 12:11:58.043] =========== Partition Table 2 ============
[2020/05/28 12:11:58.043] PartTbl.Active = 0x69
[2020/05/28 12:11:58.044] PartTbl.FsFlag = 0x65
[2020/05/28 12:11:58.044] PartTbl.StartSectorId = 168689522
[2020/05/28 12:11:58.044] PartTbl.SectorCount = 1936028240
[2020/05/28 12:11:58.044] PartTbl.StartHead = 115
[2020/05/28 12:11:58.044] PartTbl.StartSector = 43
[2020/05/28 12:11:58.044] PartTbl.StartCylinder = 129
[2020/05/28 12:11:58.045] PartTbl.EndHead = 114
[2020/05/28 12:11:58.045] PartTbl.EndSector = 50
[2020/05/28 12:11:58.045] PartTbl.EndCylinder = 445
[2020/05/28 12:11:58.045] =========== Partition Table 3 ============
[2020/05/28 12:11:58.045] PartTbl.Active = 0x73
[2020/05/28 12:11:58.046] PartTbl.FsFlag = 0x79
[2020/05/28 12:11:58.046] PartTbl.StartSectorId = 1869881465
[2020/05/28 12:11:58.046] PartTbl.SectorCount = 1936028192
[2020/05/28 12:11:58.046] PartTbl.StartHead = 32
[2020/05/28 12:11:58.046] PartTbl.StartSector = 33
[2020/05/28 12:11:58.047] PartTbl.StartCylinder = 441
[2020/05/28 12:11:58.047] PartTbl.EndHead = 32
[2020/05/28 12:11:58.047] PartTbl.EndSector = 43
[2020/05/28 12:11:58.047] PartTbl.EndCylinder = 405
[2020/05/28 12:11:58.047] =========== Partition Table 4 ============
[2020/05/28 12:11:58.047] PartTbl.Active = 0x74
[2020/05/28 12:11:58.048] PartTbl.FsFlag = 0xd
[2020/05/28 12:11:58.048] PartTbl.StartSectorId = 2885681152
[2020/05/28 12:11:58.048] PartTbl.SectorCount = 55499
[2020/05/28 12:11:58.048] PartTbl.StartHead = 97
[2020/05/28 12:11:58.048] PartTbl.StartSector = 50
[2020/05/28 12:11:58.048] PartTbl.StartCylinder = 465
[2020/05/28 12:11:58.049] PartTbl.EndHead = 10
[2020/05/28 12:11:58.049] PartTbl.EndSector = 0
[2020/05/28 12:11:58.049] PartTbl.EndCylinder = 0
[2020/05/28 12:11:58.049] Part3 Part4 are not empty
[2020/05/28 12:11:58.153] Total 19 languages ...
[2020/05/28 12:12:10.983] InstallVentoy2PhyDrive PhyDrive1 << UFD 16GB>>
[2020/05/28 12:12:10.987] Copy boot img success
[2020/05/28 12:12:10.987] Disk signature: 0xa8e05f2d
[2020/05/28 12:12:10.988] Lock disk for clean .............................
[2020/05/28 12:12:10.988] QueryDosDeviceA success \Device\Harddisk1\DR8
[2020/05/28 12:12:10.989] [0] CreateFileA \\.\PhysicalDrive1 code:0 000002B4
[2020/05/28 12:12:10.991] FSCTL_LOCK_VOLUME success
[2020/05/28 12:12:10.991] LogicalDrive:\\.\C: PhyDrive:0 Offset:2097152 ExtentLength:250056015872
[2020/05/28 12:12:10.992] LogicalDrive:\\.\E: PhyDrive:1 Offset:0 ExtentLength:16149076992
[2020/05/28 12:12:10.993] E: is belong to phydrive1
[2020/05/28 12:12:10.993] Delete mountpoint E:\ ret:1 code:0
[2020/05/28 12:12:10.994] Will use 'E:' as volume mountpoint
[2020/05/28 12:12:12.391] Deleting ALL partition(s) from disk '\\?\PhysicalDrive1':
[2020/05/28 12:12:12.392] * Partition 1 (offset: 0, size: 16149076992)
[2020/05/28 12:12:12.399] Could not delete partitions: 2147942450
[2020/05/28 12:12:12.399] Deleting all partitions ......................... OK
[2020/05/28 12:12:12.402] Lock disk for write .............................
[2020/05/28 12:12:12.403] QueryDosDeviceA success \Device\Harddisk1\DR8
[2020/05/28 12:12:12.404] [0] CreateFileA \\.\PhysicalDrive1 code:0 00000344
[2020/05/28 12:12:12.404] Opened \\.\PhysicalDrive1 for exclusive write access
[2020/05/28 12:12:12.406] FSCTL_LOCK_VOLUME success
[2020/05/28 12:12:12.410] Formatting part1 exFAT ...
[2020/05/28 12:12:12.411] Formatting Part1 exFAT ...
[2020/05/28 12:12:12.418] WriteFile error bRet:0 WriteSize:4608 dwSize:0 ErrCode:5
[2020/05/28 12:12:12.423] WriteFile error bRet:0 WriteSize:61952 dwSize:0 ErrCode:5
[2020/05/28 12:12:12.425] WriteFile error bRet:0 WriteSize:1967104 dwSize:0 ErrCode:5
[2020/05/28 12:12:12.427] WriteFile error bRet:0 WriteSize:32768 dwSize:0 ErrCode:5
[2020/05/28 12:12:12.427] WriteFile error bRet:0 WriteSize:512 dwSize:0 ErrCode:5
[2020/05/28 12:12:12.428] WriteFile error bRet:0 WriteSize:512 dwSize:0 ErrCode:5
[2020/05/28 12:12:12.428] WriteFile error bRet:0 WriteSize:512 dwSize:0 ErrCode:5
[2020/05/28 12:12:12.428] WriteFile error bRet:0 WriteSize:512 dwSize:0 ErrCode:5
[2020/05/28 12:12:12.429] WriteFile error bRet:0 WriteSize:512 dwSize:0 ErrCode:5
[2020/05/28 12:12:12.429] WriteFile error bRet:0 WriteSize:512 dwSize:0 ErrCode:5
[2020/05/28 12:12:12.430] WriteFile error bRet:0 WriteSize:512 dwSize:0 ErrCode:5
[2020/05/28 12:12:12.430] WriteFile error bRet:0 WriteSize:512 dwSize:0 ErrCode:5
[2020/05/28 12:12:12.430] WriteFile error bRet:0 WriteSize:512 dwSize:0 ErrCode:5
[2020/05/28 12:12:12.431] WriteFile error bRet:0 WriteSize:512 dwSize:0 ErrCode:5
[2020/05/28 12:12:12.431] WriteFile error bRet:0 WriteSize:512 dwSize:0 ErrCode:5
[2020/05/28 12:12:12.431] WriteFile error bRet:0 WriteSize:512 dwSize:0 ErrCode:5
[2020/05/28 12:12:12.432] WriteFile error bRet:0 WriteSize:512 dwSize:0 ErrCode:5
[2020/05/28 12:12:12.432] WriteFile error bRet:0 WriteSize:512 dwSize:0 ErrCode:5
[2020/05/28 12:12:12.432] WriteFile error bRet:0 WriteSize:512 dwSize:0 ErrCode:5
[2020/05/28 12:12:12.433] WriteFile error bRet:0 WriteSize:512 dwSize:0 ErrCode:5
[2020/05/28 12:12:12.433] WriteFile error bRet:0 WriteSize:512 dwSize:0 ErrCode:5
[2020/05/28 12:12:12.433] WriteFile error bRet:0 WriteSize:512 dwSize:0 ErrCode:5
[2020/05/28 12:12:12.434] WriteFile error bRet:0 WriteSize:512 dwSize:0 ErrCode:5
[2020/05/28 12:12:12.434] WriteFile error bRet:0 WriteSize:512 dwSize:0 ErrCode:5
[2020/05/28 12:12:12.434] WriteFile error bRet:0 WriteSize:512 dwSize:0 ErrCode:5
[2020/05/28 12:12:12.435] WriteFile error bRet:0 WriteSize:512 dwSize:0 ErrCode:5
[2020/05/28 12:12:12.435] WriteFile error bRet:0 WriteSize:512 dwSize:0 ErrCode:5
[2020/05/28 12:12:12.435] WriteFile error bRet:0 WriteSize:512 dwSize:0 ErrCode:5
[2020/05/28 12:12:12.437] Formatting Part1 exFAT success
[2020/05/28 12:12:12.438] mount part 13
[2020/05/28 12:12:12.441] Writing part2 FAT img ...
[2020/05/28 12:12:12.441] FormatPart2Fat ...
[2020/05/28 12:12:12.444] Malloc whole img buffer success, now decompress ...
[2020/05/28 12:12:12.867] decompress finished success
[2020/05/28 12:12:12.867] VentoyProcSecureBoot 0 ...
[2020/05/28 12:12:12.868] Open ventoy efi file 00E7A158
[2020/05/28 12:12:12.868] ventoy efi file size 1265664 ...
[2020/05/28 12:12:12.869] Now delete all efi files ...
[2020/05/28 12:12:12.869] Open bootx64 efi file 00E7A59C
[2020/05/28 12:12:12.879] Write part data bRet:0 dwSize:0 code:5
[2020/05/28 12:12:12.887] Mounting Ventoy Partition .......................
[2020/05/28 12:12:13.889] LogicalDrive:\\.\C: PhyDrive:0 Offset:2097152 ExtentLength:250056015872
[2020/05/28 12:12:13.889] Logical drive letter after write ventoy: <>
[2020/05/28 12:12:13.889] need to mount ventoy part1...
[2020/05/28 12:12:13.889] GetVentoyVolumeName PhyDrive 1 PartOffset:1048576
[2020/05/28 12:12:13.890] Find volume:\\?\Volume{f58a5c3a-0000-0000-0000-200000000000}\
[2020/05/28 12:12:13.890] IOCTL_VOLUME_GET_VOLUME_DISK_EXTENTS bRet:1 code:0
[2020/05/28 12:12:13.890] NumberOfDiskExtents:1 DiskNumber:0
[2020/05/28 12:12:13.891] This volume DiskNumber:0 offset:2097152
[2020/05/28 12:12:13.891] Find volume:\\?\Volume{6b085d1f-61d0-11ea-88cf-806e6f6e6963}\
[2020/05/28 12:12:13.892] IOCTL_VOLUME_GET_VOLUME_DISK_EXTENTS bRet:1 code:0
[2020/05/28 12:12:13.892] NumberOfDiskExtents:1 DiskNumber:1
[2020/05/28 12:12:13.892] This volume DiskNumber:1 offset:0
[2020/05/28 12:12:13.893] GetVentoyVolumeName return 1168
[2020/05/28 12:12:13.893] Failed to find ventoy volume
[2020/05/28 12:12:13.893] OK

[2020/05/28 12:12:13.894] This time install failed, now wait and retry...
[2020/05/28 12:12:23.895] Now retry to install...
[2020/05/28 12:12:23.896] InstallVentoy2PhyDrive PhyDrive1 << UFD 16GB>>
[2020/05/28 12:12:23.903] Disk signature: 0x41baab33
[2020/05/28 12:12:23.904] Lock disk for clean .............................
[2020/05/28 12:12:23.905] QueryDosDeviceA success \Device\Harddisk1\DR8
[2020/05/28 12:12:23.909] [0] CreateFileA \\.\PhysicalDrive1 code:0 0000035C
[2020/05/28 12:12:23.913] FSCTL_LOCK_VOLUME success
[2020/05/28 12:12:23.915] LogicalDrive:\\.\C: PhyDrive:0 Offset:2097152 ExtentLength:250056015872
[2020/05/28 12:12:23.916] No drive letter was assigned...
[2020/05/28 12:12:23.917] GetFirstUnusedDriveLetter D: ...
[2020/05/28 12:12:23.918] Will use 'D:' as volume mountpoint
[2020/05/28 12:12:23.976] Deleting ALL partition(s) from disk '\\?\PhysicalDrive1':
[2020/05/28 12:12:23.976] * Partition 1 (offset: 0, size: 16149076992)
[2020/05/28 12:12:23.985] Could not delete partitions: 2147942450
[2020/05/28 12:12:23.985] Deleting all partitions ......................... OK
[2020/05/28 12:12:23.986] Lock disk for write .............................
[2020/05/28 12:12:23.987] QueryDosDeviceA success \Device\Harddisk1\DR8
[2020/05/28 12:12:23.988] [0] CreateFileA \\.\PhysicalDrive1 code:0 00000360
[2020/05/28 12:12:23.988] Opened \\.\PhysicalDrive1 for exclusive write access
[2020/05/28 12:12:23.989] FSCTL_LOCK_VOLUME success
[2020/05/28 12:12:23.992] Formatting part1 exFAT ...
[2020/05/28 12:12:23.992] Formatting Part1 exFAT ...
[2020/05/28 12:12:24.000] WriteFile error bRet:0 WriteSize:4608 dwSize:0 ErrCode:5
[2020/05/28 12:12:24.004] WriteFile error bRet:0 WriteSize:61952 dwSize:0 ErrCode:5
[2020/05/28 12:12:24.006] WriteFile error bRet:0 WriteSize:1967104 dwSize:0 ErrCode:5
[2020/05/28 12:12:24.008] WriteFile error bRet:0 WriteSize:32768 dwSize:0 ErrCode:5
[2020/05/28 12:12:24.008] WriteFile error bRet:0 WriteSize:512 dwSize:0 ErrCode:5
[2020/05/28 12:12:24.008] WriteFile error bRet:0 WriteSize:512 dwSize:0 ErrCode:5
[2020/05/28 12:12:24.009] WriteFile error bRet:0 WriteSize:512 dwSize:0 ErrCode:5
[2020/05/28 12:12:24.009] WriteFile error bRet:0 WriteSize:512 dwSize:0 ErrCode:5
[2020/05/28 12:12:24.010] WriteFile error bRet:0 WriteSize:512 dwSize:0 ErrCode:5
[2020/05/28 12:12:24.010] WriteFile error bRet:0 WriteSize:512 dwSize:0 ErrCode:5
[2020/05/28 12:12:24.010] WriteFile error bRet:0 WriteSize:512 dwSize:0 ErrCode:5
[2020/05/28 12:12:24.010] WriteFile error bRet:0 WriteSize:512 dwSize:0 ErrCode:5
[2020/05/28 12:12:24.011] WriteFile error bRet:0 WriteSize:512 dwSize:0 ErrCode:5
[2020/05/28 12:12:24.011] WriteFile error bRet:0 WriteSize:512 dwSize:0 ErrCode:5
[2020/05/28 12:12:24.011] WriteFile error bRet:0 WriteSize:512 dwSize:0 ErrCode:5
[2020/05/28 12:12:24.011] WriteFile error bRet:0 WriteSize:512 dwSize:0 ErrCode:5
[2020/05/28 12:12:24.012] WriteFile error bRet:0 WriteSize:512 dwSize:0 ErrCode:5
[2020/05/28 12:12:24.012] WriteFile error bRet:0 WriteSize:512 dwSize:0 ErrCode:5
[2020/05/28 12:12:24.012] WriteFile error bRet:0 WriteSize:512 dwSize:0 ErrCode:5
[2020/05/28 12:12:24.013] WriteFile error bRet:0 WriteSize:512 dwSize:0 ErrCode:5
[2020/05/28 12:12:24.013] WriteFile error bRet:0 WriteSize:512 dwSize:0 ErrCode:5
[2020/05/28 12:12:24.013] WriteFile error bRet:0 WriteSize:512 dwSize:0 ErrCode:5
[2020/05/28 12:12:24.013] WriteFile error bRet:0 WriteSize:512 dwSize:0 ErrCode:5
[2020/05/28 12:12:24.014] WriteFile error bRet:0 WriteSize:512 dwSize:0 ErrCode:5
[2020/05/28 12:12:24.014] WriteFile error bRet:0 WriteSize:512 dwSize:0 ErrCode:5
[2020/05/28 12:12:24.014] WriteFile error bRet:0 WriteSize:512 dwSize:0 ErrCode:5
[2020/05/28 12:12:24.014] WriteFile error bRet:0 WriteSize:512 dwSize:0 ErrCode:5
[2020/05/28 12:12:24.014] WriteFile error bRet:0 WriteSize:512 dwSize:0 ErrCode:5
[2020/05/28 12:12:24.016] Formatting Part1 exFAT success
[2020/05/28 12:12:24.017] mount part 13
[2020/05/28 12:12:24.019] Writing part2 FAT img ...
[2020/05/28 12:12:24.019] FormatPart2Fat ...
[2020/05/28 12:12:24.021] Malloc whole img buffer success, now decompress ...
[2020/05/28 12:12:24.397] decompress finished success
[2020/05/28 12:12:24.398] VentoyProcSecureBoot 0 ...
[2020/05/28 12:12:24.398] Open ventoy efi file 00E7A158
[2020/05/28 12:12:24.398] ventoy efi file size 1265664 ...
[2020/05/28 12:12:24.399] Now delete all efi files ...
[2020/05/28 12:12:24.399] Open bootx64 efi file 00E7A59C
[2020/05/28 12:12:24.407] Write part data bRet:0 dwSize:0 code:5
[2020/05/28 12:12:24.413] Mounting Ventoy Partition .......................
[2020/05/28 12:12:25.415] LogicalDrive:\\.\C: PhyDrive:0 Offset:2097152 ExtentLength:250056015872
[2020/05/28 12:12:25.416] Logical drive letter after write ventoy: <>
[2020/05/28 12:12:25.417] need to mount ventoy part1...
[2020/05/28 12:12:25.418] GetVentoyVolumeName PhyDrive 1 PartOffset:1048576
[2020/05/28 12:12:25.419] Find volume:\\?\Volume{f58a5c3a-0000-0000-0000-200000000000}\
[2020/05/28 12:12:25.420] IOCTL_VOLUME_GET_VOLUME_DISK_EXTENTS bRet:1 code:0
[2020/05/28 12:12:25.421] NumberOfDiskExtents:1 DiskNumber:0
[2020/05/28 12:12:25.421] This volume DiskNumber:0 offset:2097152
[2020/05/28 12:12:25.422] Find volume:\\?\Volume{6b085d1f-61d0-11ea-88cf-806e6f6e6963}\
[2020/05/28 12:12:25.425] IOCTL_VOLUME_GET_VOLUME_DISK_EXTENTS bRet:1 code:0
[2020/05/28 12:12:25.426] NumberOfDiskExtents:1 DiskNumber:1
[2020/05/28 12:12:25.427] This volume DiskNumber:1 offset:0
[2020/05/28 12:12:25.427] GetVentoyVolumeName return 1168
[2020/05/28 12:12:25.428] Failed to find ventoy volume
[2020/05/28 12:12:25.429] OK

[2020/05/28 13:12:07.685]

zds1210

终于出来一个新的玩法，不错。

9zhmke

不得不说确实好用！

goodtime

遇到有机器不能使用键盘， 不知道问题在哪里，DELL E6430笔记本， 暂时就是这个款机器碰到这个问题

barton

能更新对livecd类linux的persistent支持吗，比如knoppix

hannibal

试试看哈

sairen139

一个u盘同时支持pe维护和各种类型的系统安装，还可以当数据盘，超级棒！不知道是否支持苹果系统安装？

lbw2007

感谢分享！！
学习一下

zhaoyun444

去年才买的笔记本电脑（BIOS），启动时无法引导选择ISO，其他台式机、笔记本无异常。
恕我学习力不够，没能引导的原因是没有关闭secure boot，导致U盘无法引导，进入BIOS关闭了，顺利引导并进入PE。

小白有话说：能不能直接（而不是加参数）实现不关闭secure boot从U盘引导？？

longpanda

liuzhaoyzz 发表于 2020-5-16 15:43
下载ventoy1.0.10版本试了下，全新安装之后，重启，按F8可以看到优盘的BIOS启动项，选择之后，无法启动，直 ...

我记得之前让你帮忙测试过，把第一个分区改为活动分区，第二个改为非活动分区，Legacy BIOS下是否能启动。当时情况也是不行。 现在是什么情况？
把这里的完全初始化设置之后， 第一个分区改为活动分区之后Legacy BIOS下能认到启动项吗？

我已经收到几个反馈，都是需要把第一个分区改为活动分区，第二个改为非活动分区之后，BIOS才能识别。
我在考虑后面版本是不是把它调整过来。毕竟第一个分区为活动分区是比较常规的方式，而且我觉得标记这个分区为活动分区和实际启动文件在不在这个分区上应该没啥关系。

liuzhaoyzz

longpanda 发表于 2020-5-29 22:34
我记得之前让你帮忙测试过，把第一个分区改为活动分区，第二个改为非活动分区，Legacy BIOS下是否能启动 ...

似乎是的，但是需要更加详细地测试，可能上次是因为BIOS设置中，usb未设置为完全初始化的原因导致的，我不确定，这个必须要深度测试才行。
因为测试结果会影响你对程序的设置，这很重要。
我要出去大约2小时，回来后帮忙测试下。
请详细地描述下，你倒底需要我用什么版本来测试，还是上次你发的测试版？就是设置第一分区为活动分区的那个？还是1.0.11版本，然后我用bootice修改活动分区为第一个exfat分区？

longpanda

liuzhaoyzz 发表于 2020-5-30 08:10
似乎是的，但是需要更加详细地测试，可能上次是因为BIOS设置中，usb未设置为完全初始化的原因导致的，我 ...

就用 1.0.11 版本吧。
就是测试下，在你的机器上Legacy BIOS下识别启动项和设置哪个分区为活动分区之间到底是什么关系。
比如默认情况下（第一个为非活动分区，第二个为活动分区）Legacy BIOS下是否每次都能识别到启动项。
然后再换过来（即第一个改为活动分区，第二个改为非活动分区）再看看Legacy BIOS下能否每次都能识别到启动项。

我个人认为，一般情况应该是：
大部分的机器，不管你设置哪个分区为活动分区，它都能识别出启动项。
个别的机器，你必须把第一个分区设置为活动分区，它才能识别出启动项。
应该没有哪个机器说，你必须把第二个分区设置为活动分区（虽然启动文件是在第二个分区上）才能识别出启动项。

所以，我觉得Ventoy默认把第一个分区设置为活动分区，第二个设置为非活动分区，应该兼容性会更好一些。

liuzhaoyzz

longpanda 发表于 2020-5-30 09:43
就用 1.0.11 版本吧。
就是测试下，在你的机器上Legacy BIOS下识别启动项和设置哪个分区为活动分区之间 ...

刚才测试了很多次，用ventoy1.0.11版本。
设置第一分区exfat为活动分区，BIOS/UEFI启动都可以，在一台新电脑和老电脑启动都没问题。
但是有个问题，感觉ventoy启动的时候优盘能否出现在启动列表中，需要看人品，一般地需要重新拔插一次优盘才可以，有时候不拔插优盘又可以看到启动列表。


下图是按F12/F8这样子的一次性启动快捷键的启动菜单列表：
有时候出现启动列表中出现只有BIOS模式的优盘，选择之后无法启动，直接从硬盘启动。（USB启动项已设置为完全初始化）


有时候就正常，能够显示出BIOS/UEFI启动列表。

出现这样子的情况，让我非常迷惑。

longpanda

liuzhaoyzz 发表于 2020-5-30 11:51
刚才测试了很多次，用ventoy1.0.11版本。
设置第一分区exfat为活动分区，BIOS/UEFI启动都可以，在一台新 ...

这个可能还是和这个主板有关，你这种时有时无的情况是在每个电脑上都这样吗，还是只有一个电脑是这样的。

不过，按照验证结果， 最起码把第一个分区改为可启动分区应该是不会有坏的影响的。所以，后面版本我改过来应该问题不大，而且能兼容一些比较老的，只认第一个分区为活动分区的主板。

liuzhaoyzz

longpanda 发表于 2020-5-30 12:45
这个可能还是和这个主板有关，你这种时有时无的情况是在每个电脑上都这样吗，还是只有一个电脑是这样的。 ...

不是每台电脑都是这样子，我手头就只有几台电脑，有两台电脑配置一样的，华硕主板台式机，出现这样的问题。老电脑感觉还好。需要大家大面积的测试，来看下结论。

annyhow

随便说一下，试了几个PE都很好，就是优启通，我在联想的一个笔记本上启动，一直都是光标在闪，好长时间也没有反应，我以为是我的ISO  文件没有做好，就在网上下载了小鱼的旧版本3.3的ISO,结果一样。今天在我的松下笔记本上一试，结果弹出一个按任意键继续的窗口，按键后竟然进去了，两个版本都可以，不知道什么原因。

秋月云开

annyhow 发表于 2020-5-30 14:32
随便说一下，试了几个PE都很好，就是优启通，我在联想的一个笔记本上启动，一直都是光标在闪，好长时间也没 ...

电脑主板不同

秋月云开

、

秋月云开

liuzhaoyzz 发表于 2020-5-30 11:51
刚才测试了很多次，用ventoy1.0.11版本。
设置第一分区exfat为活动分区，BIOS/UEFI启动都可以，在一台新 ...

[需要重新拔插一次优盘才可以]才能出现启动项，我在05年的老联想上出现过，是1.0.06版

秋月云开

在BOOTICEx86.exe的分区管理中有三个分区，但在计算机的磁盘管理中只有两个，是咋回事？
注是1.0.06版。

秋月云开

这两天【蓝奏云】不能下载了？

2011sxpdwzs

换个主题哇 另 啥时候出个苹果版的

ALLANCHENG

试试好不好用。感谢分享。

JackieW

看着心痒痒，有机会尝试一下

laolaishao

ventoy-1.0.12-windows+ventoy_wimboot.img顺利启动  * .wim 文件。谢谢楼主！

yzw92

楼主就是开发者吗