HDAT2 v5.3 最新版，所有测试功能开放了 11.12.2016更新

wang6610

原帖由 M 于 2012-12-19 20:47 发表
下载不动呀？有没有哪位大侠给整个IMG版本的啊？

http://hdat2.com/files/hdat2img_492.exe  粘贴到迅雷...

[ 本帖最后由 wang6610 于 2012-12-20 08:20 编辑 ]

wang6610

HDAT2支持48-bits LBA ,就看dos和主板了

(2^48)(512) / (1 * (10^12)) = 144115.2 TB = 131072 TiB


Features:

•fully implemented commands: SET MAX, SET SECURITY, Device Configuration Overlay (DCO)
•device access with interrupt 13h, direct via ATA ports, with ASPI drivers
•detects ATA/ATAPI/SATA devices with on-board and add-on controllers
•detects devices on AHCI/RAID controllers (just only on ports 0-3)
•detects USB devices via USB ASPI driver or BIOS (if supported)
•detects SCSI hard drives via BIOS interrupt 13h or ASPI drivers
•other SCSI devices are detected via ASPI drivers only (must be loaded before);
with ASPI drivers you will get more information about SCSI devices
•test and repair device for bad sectors (so far version 4.5.3 only)
•many different test-functions for hard drives
•resize hard drives which supports SET MAX ADDRESS/EXT
(supports 28/48-bits LBA addressing modes)
•drive lock detection via security feature (Security Menu)
•S.M.A.R.T. functions for ATA/SATA and SCSI drives only
•information about devices (ATA/ATAPI, BIOS interrupt 13h, ASPI, EDD)
•sector viewer for devices (also for USB, ZIP, CD-data discs)
•to access ATA/SATA CD/DVD drive you don't need any driver or MSCDEX
•enable/disable some features for direct-access devices
•Device Configuration Overlay (DCO) feature set
(you can restore a full capacity or allow/disallow some feature sets of hard drive)

wang6610

刚才在官方演示程序hd列表里,看到了3t的WD hd,还有待实际测试..

wang6610

那就是不压缩....................

wang6610

原帖由 dos时代菜鸟 于 2012-12-24 11:29 发表
看来 只能 如此 了 ，不要压缩 的 ，解压缩 后   1.13M 呵呵

官方不压缩的是2.21M,可从iso中解出.

wang6610

upx压缩后再解压,文件md5会发生改变的. 我过去试过.

wang6610

原帖由 andos 于 2012-12-24 11:46 发表
汗....
IMG或者光EXE，unUPX后是1.13M

ISO版2.21M...难道IMG版和ISO版的EXE有不同?

是的......................

wang6610

直接用iso版的exe ......................