刻录机不认刻录盘怎麽办？

强龙

前几天买了10张清华同方的刻录盘，有5张刻录时提示：不能结束区段，以X速的刻录失败。我从32X一直降到4X都不行，谁能分析一下原因？
下边是刻录日志：

Windows 2000 5.0
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 2002-8-14 15:03:36
ahead WinASPI: File 'D:\Program Files\ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 2003-6-17 15:25:04
Nero版本： 6.0.0.15
刻录机：              <ATAPI CD-RW 32X10X40>    版本: B.PW - HA 3 TA 0 - 6.0.0.15
适配卡驱动程序：     <>                        HA 3
Drive buffer  :      8192kB
Bus Type      :      default (0) -> ATAPI, detected: ?
CD-ROM:               <Generic  STEALTH DVD     >版本:      - HA 0 TA 0 - 6.0.0.15
适配卡驱动程序：     <St320hg>                 HA 0
=== Scsi-Device-Map ===
CdRomPeripheral      : Generic STEALTH DVD            St320hg Port 0 ID 0  DMA: Off
DiskPeripheral       : Maxtor 4D040H2                IdeChnDr Port 1 ID 0  DMA: On
CdRomPeripheral      :   ATAPI CDROM.44X             IdeChnDr Port 2 ID 0  DMA: On
=== CDRom-Device-Map ===
Generic STEALTH DVD        I:   CDRom1
ATAPI CDROM.44X           H:   CDRom0
ATAPI CD-RW 32X10X40       J:   CDRom7
=======================
AutoRun : 0
Excluded drive IDs:
CmdQueuing     : 1
CmdNotification: 2
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
EraseSpeed     : 0
BUFE           : 0
Physical memory     : 255MB (261616kB)
Free physical memory: 27MB (27764kB)
Memory in use       : 89 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
4.11.2003
光盘映像
12:56:32        #1 Phase 87 File dlgbrnst.cpp, Line 1843
        无缝链接已激活
        
12:56:32        #2 Text 0 File Reader.cpp, Line 118
        Reader running
        
12:56:32        #3 Text 0 File Writer.cpp, Line 127
        Writer ATAPI    CD-RW 32X10X40   running
        
12:56:32        #4 Text 0 File Burncd.cpp, Line 3169
        Turn on 轨道一次刻录, using CD-R/RW media
        
12:56:32        #5 Text 0 File DlgWaitCD.cpp, Line 230
        Last possible write address on media:   359844 (79:59.69)
        Last address to be written:             295349 (65:39.74)
        
12:56:32        #6 Text 0 File DlgWaitCD.cpp, Line 235
        Write in overburning mode: FALSE
        
12:56:32        #7 Text 0 File DlgWaitCD.cpp, Line 1878
        Recorder: ATAPI CD-RW 32X10X40;
           CDR code: 00 97 15 17; OSJ entry from: Ritek Co.
           ATIP Data:
             Special    Info [hex] 1: C0 00 90, 2: 61 0F 11 (LI 97:15.17), 3: 4F 3B 46 (LO 79:59.70)
             Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)
        
12:56:32        #8 Text 0 File DlgWaitCD.cpp, Line 393
        >>> Protocol of DlgWaitCD activities: <<<
        =========================================
        
12:56:32        #9 Text 0 File ThreadedTransferInterface.cpp, Line 769
        Setup items (after recorder preparation)
         0: TRM_DATA_MODE1 (CD-ROM模式1, ISO 9660)
            2 indices, index0 (150) not provided
            original disc pos #0 + 295350 (295350) = #295350/65:38.0
            relocatable, disc pos for caching/writing not required/not required, patch infos
            -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 295348 blocks [ATAPI    CD-RW 32X10X40  ]
        --------------------------------------------------------------
        
12:56:32        #10 Text 0 File ThreadedTransferInterface.cpp, Line 938
        Prepare recorder [ATAPI    CD-RW 32X10X40  ] for write in TAO
        DAO infos:
        ==========
         MCN: ""
         TOCType: 0x00; Session Closed, disc not fixated
         Tracks 1 to 1:
           1: TRM_DATA_MODE1, 2048/0x00, FilePos             0        307200     605184000, ISRC ""
        DAO layout:
        ===========
         __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
            -150 |  lead-in |   0 |   0x00 |  0x41
            -150 |        1 |   0 |   0x00 |  0x41
               0 |        1 |   1 |   0x00 |  0x41
          295350 | lead-out |   1 |   0x00 |  0x41
        
12:56:32        #11 Text 0 File ThreadedTransferInterface.cpp, Line 965
        Removed 2 run-out blocks from end of track 1.
        
12:56:32        #12 Phase 24 File dlgbrnst.cpp, Line 1843
        文件暂存过程开始
        
12:56:32        #13 Phase 25 File dlgbrnst.cpp, Line 1843
        文件暂存过程完成
        
12:56:32        #14 Phase 36 File dlgbrnst.cpp, Line 1843
        以4x (600 KB/s)的速度开始刻录
        
12:56:33        #15 Text 0 File ThreadedTransferInterface.cpp, Line 2136
        Verifying disc position of item 0 (relocatable, no disc pos, patch infos, orig at #0): write at #0
        
12:56:33        #16 Text 0 File Mmc.cpp, Line 19000
        Set BUFE: Seamless Link -> ON , Auto Pilot : ON
        
12:56:58        #17 SCSI -1106 File Cdrdrv.cpp, Line 1411
        SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x077D0000
        Status:     0x04 (0x01, SCSI_ERR)
        HA-Status   0x00 (0x00, OK)
        TA-Status   0x02 (0x01, SCSI_TASTATUS_CHKCOND)
        Sense Key:  0x03 (KEY_MEDIUM_ERROR)
        Sense Code: 0x73
        Sense Qual: 0x03
        CDB Data:   0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
        Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
                    0x00 0x00 0x00 0x00 0x73 0x03
        
12:56:58        #18 CDR -1106 File Writer.cpp, Line 335
        电源校准错误
        
12:56:59        #19 Text 0 File ThreadedTransfer.cpp, Line 228
        all writers idle, stopping conversion
        
12:56:59        #20 Text 0 File ThreadedTransfer.cpp, Line 222
        conversion idle, stopping reader
        
12:56:59        #21 CDR -201 File WriterStatus.cpp, Line 193
        写入状态无效
        ATAPI CD-RW 32X10X40\H3 T0
        
12:56:59        #22 TRANSFER -18 File WriterStatus.cpp, Line 193
        无法执行结束轨道
        
12:56:59        #23 Text 0 File Mmc.cpp, Line 13975
        <ATAPI   CD-RW 32X10X40  > start Close Session
        
12:56:59        #24 Text 0 File dlgbrnst.cpp, Line 1703
        Set remaining time: 0:00,000 (0ms) -> OK
        
12:56:59        #25 Phase 38 File dlgbrnst.cpp, Line 1843
        以4x (600 KB/s)的速度刻录失败
        
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 2002-8-14 15:03:36
File 'Drivers\st320hg.sys': Ver=3.20.0.0, size=85696 bytes, created 2002-9-12 11:49:36 (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

cai2003

我用的数码多48x的光盘会出现说光盘容量设置不对

泽维尔

应当是CD-R盘片的问题，你可换另一种盘试试。

强龙

也可能是刻录机的问题，今天用52X的建基刻录机，用52x刻，又能用了，但是盘上标明是48x的，怪！

jarychan

下面引用由强龙在 2003/11/04 11:24pm 发表的内容：
也可能是刻录机的问题，今天用52X的建基刻录机，用52x刻，又能用了，但是盘上标明是48x的，怪！

只是一个参考值而已。

totodog

萝卜配青菜的问题，不是刻录机和光盘都好就一定兼容，换个牌子呗~