|
参照MSDN上的一篇文章。
http://msdn.microsoft.com/librar ... l/XPESP1_CF_EWF.asp
1先在DOS下把CF卡分区激活,FORMAT 为FAT16并传导DOS启动文件
确认CF卡能正常引导DOS
2把BOOTPREP.EXE文件复制到CF卡上并在DOS下运行它,按两次“Y”。
3添加下列组件
Enhanced Write Filter
EWF NTLDR
EWF Manager Console application
Registry Editor (optional) 注册表编辑器
Enhanced Write Filter API (optional)
并把Enhanced Write Filter 里的EWF Partition Size in KBytes 设为CF卡的保护分区的容量
把Start EWF Enabled 的钩去掉,其他用默认设置
5FBA启动完成后把下面文件复制下来村成注册表文件导入XPE系统并重新启动,然后看EWFMGR C:就完全OK了
======================================
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\ewf]
"ErrorControl"=dword:00000001
"Group"="System Bus Extender"
"Start"=dword:00000000
"Type"=dword:00000001
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{71A27CDD-812A-11D0-BEC7-08002BE2092F}]
"UpperFilters"="Ewf"
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\ewf\Parameters]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\ewf\Parameters\Protected]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\ewf\Parameters\Protected\Volume0]
"VolumeID"="{1EA414D1-6760-4625-8CBE-4F9F85A48E15}"
"Type"=dword:00000001
"ArcName"="multi(0)disk(0)rdisk(0)partition(1)"
=========================================== |
|