|
4#
楼主 |
发表于 2009-2-10 21:16:49
|
只看该作者
三、关于RW
(接上图)
当要把U盘量产成CDROM+ZIP时,CDROM disk设置项中有个MAX size,如果MAX size>0,
且在量产工具的INI中设置了升级密码,则这个CD盘就是个“不破坏ZIP内容就能upgrade”
的CD。这个功能好象是个程序接口,我们enduser如何才能利用,未知。
相关内容摘抄如下:
......
Max Size:
The maximum disk size that allows on the disk. If “Pub” is a CDROM, that is,
you specify device type is “CDROM+ZIP”, the “Max Size” usually is set ZERO.
ZERO means the disk size will be as big as or just a little bigger than the real
contents it have. It will save much more space on NAND flash.
SPECIAL FUNCTION FOR SYSTEM DEVELOPER:
- CDROM UPGRADE:
If you set a number bigger than ZERO, it means the disk can be upgraded
individually without destroying the content on ZIP. In such case, you
have to set your password code in “USBDiskMPTool.ini” that you can
use it in the future in your program to upgrade the content in CDROM.
Otherwise the free CDROM space will be lost. For example, the password
is “123456”
[Update CDROM]
VENDORID=123456
......
[ 本帖最后由 wuwuzz 于 2009-2-10 21:18 编辑 ] |
|