Question again: NT install ask putting CD in drive A

wanz

I tried to include NT4 into win2ks3in1 sp2 disk (the one according to DUYIHUA, sorry cann't access the adv. member area). After boot, choosing installing NT4 workstation,inspecting hardware,then it prompts:
Please insert disk labeled as windows NT installation CD-ROM to drive A
Presh enter to continue and F3 to exit...

Could anyone point out what's wrong here? The orgnization of the files is similar to whatever the win2000.
Thx a lot.

wuyou

做NT/2000的多重启动光盘，关键在于引导文件和目录是否处理得当。
以NT SERVER 4.0 为例:
光盘根目录下应有 CDROM_S.40和一个引导文件 如文件名为NSRVSECT.DAT（这个文件可以用WIN2000 的引导文件来代替），还有一个引导目录如NSRV,并且要修改NSERSECT.DAT,将其中的I386改为NSRV.NSRV中的SETUPLDR.BIN和TXTSETUP.SIF也想WINDOWS 3IN1 那样做相应的处理。
上述几步做好了，应该没有什么问题。

wanz

Thx a lot. I just found that I fogot to put the CDROM_X.40 in the root directory which caused the problem.