[求助]谁有独立运行的WINPE硬盘版教程

515833 · 发表于 2004-11-23 19:14:35

我有一个移动硬盘,我想把PE装到里面,这样维护就容易多了,但我找不到响应的教程,哪位大侠教一下~~~谢谢先~~~

eric917 · 发表于 2004-11-23 20:37:35

你找找前面的贴，我记得有几个都有教的^_^

人人为我 · 发表于 2004-11-23 20:45:28

不能放到移动硬盘

eric917 · 发表于 2004-11-23 21:04:45

移动就好像没有人试过，但放在硬盘就一定可以

515833 · 发表于 2004-11-24 11:53:04

我装了,在硬盘可以用,但在移动硬盘就启动不了,
不知道是不是我的硬盘盒不支持USB启动,我先后用了充SONY的3.5寸USB2.0的外置硬盘盒还有长寿的5寸和3.5寸还有一个叫"USB2.0 TO IDE"还有两个不知什么牌的3.5寸硬盘盒的都不行.就连启动到DOS都不行
我的机子的配置是epox8rda3I,巴顿2500+,KINMAX512/DDR400,创新5.1白金版,双敏5700Ultra GDDR3,三星120G/8M*2~~~另一台是技嘉8i845pe-rz,P42.4/金士顿512/DDR400/ONDA8520(FX5200),三星120G/8M*2~~~
谁能提供一个能启动的硬盘盒的型号~~~谢谢~~~~

mayjune · 发表于 2004-11-24 17:12:49

到http://www.911cd.net/forums/index.php?act=idx上自己找吧，有介绍，但很难做的。

zhangcz · 发表于 2004-11-24 17:20:33

Yes, I have tried it some time ago and it DID work for me
The method I used was the following:
- Create an BartPE bootable partition on my own PC
- Make a ghost image of that partition
- On the USB Harddisk, I created multiple partitions.
- Use the ghost image from the interanal HD of the PC and write it to the USB HD.
- Install a bootmanager on the USB HD (I was using XFDISK)
- Setup the bootmanager on the USB HD to boot from the BartPE partition.
Voila, it worked for me...

515833 · 发表于 2004-11-25 20:59:32

我~~~看不懂E文~~~

mayjune · 发表于 2004-11-25 22:41:20

Yes, I have tried it some time ago and it DID work for me<--是的，我试了几次并且可行
The method I used was the following:<---我的制作方法如下
- Create an BartPE bootable partition on my own PC<--为bartpe在自己的电脑上分一个可启动的分区
- Make a ghost image of that partition<--为此分区做一个ghost镜像（我想是必须在将PE安装到硬盘此分区以后）
- On the USB Harddisk, I created multiple partitions.<--在USB硬盘上分多个分区
- Use the ghost image from the interanal HD of the PC and write it to the USB HD.<--用GHOST将此镜像写到USB硬盘上
- Install a bootmanager on the USB HD (I was using XFDISK)<--在USB硬盘上安装启动管理（我用XFDISK）
- Setup the bootmanager on the USB HD to boot from the BartPE partition.<--设置USB硬盘从BARTPE分区启动
Voila, it worked for me...哈哈，这样就可以为我服务了.....

弄潮儿-NET · 发表于 2004-11-25 22:53:50

下面引用由zhangcz在 2004/11/24 05:20pm 发表的内容：
Yes, I have tried it some time ago and it DID work for me
The method I used was the following:
- Create an BartPE bootable partition on my own PC
- Make a ghost image of that partition
...

牛B呀...your english is verrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrry goooooooooooooood!

wowuyou · 发表于 2004-11-26 09:11:06

我已经做成功了，参看这里：http://bbs.wuyou.net/cgi-bin/topic.cgi?forum=34&topic=1&start=2628&show=0
但好像兼容性不太好，在有些机器上不能启动。我也不知为什么！求高手能解决。

515833 · 发表于 2004-11-27 13:57:50

牛啊~~~~~~~~~~~~~~~
谢谢~~~~~~~~~~~~~~~~~~~~~~~~~
我试一下~~~~~~~~~~~~~~

		自动登录	找回密码
密码			注册