SK6213主控用啥量产工具？

tiengulden

金士顿DT1 G2 8GB 伸缩优盘





请教这个用啥量产工具？
========================================

SK6213是一個效能加強版的隨身碟控制器，它能符合USB2.0的規格並能以極低功率來滿足USB bus-power的需求。SK6213 的ECC糾正能力高達24bit，可支援最新3x奈米之 MLC。


Features: 　
。 Support 3x nm NAND:
- 15-bit/512B, 24-bit/512B and 24-bit/1KB BCH error control coding (ECC) for 2bpc and 3bpc MLC.
- Sufficient embedded buffer for 8K page NAND in dual channel configuration.

。 Passing FCC ClassB without choke.
Built-in regulator and power-on reset (POR) to save BOM.

。 Outstanding R/W performance:
- HDBench:Read:33 MB/s and Write: 19 MB/s with MLC in dual channel.
- ReadyBoost: 
>5 MB/sec throughput for random 4KB reads and,
>3 MB/sec throughput for random 512KB writes

。 USB Interface:
- Complied with high-speed USB 2.0 interface, backward compatible with USB 1.1.
- Complied with USB Mass Storage Class specification v1.0.
- Complied with USB bus-powered devices specification.
- Support HID interface for password entry in non-administrator mode.
- Integrated USB 2.0 Transceiver Macrocell Interface (UTMI) and Serial Interface Engine (SIE).

。 Varieties of Supported NAND:
- Samsung 35/42nm, Hynix 41nm, Toshiba 43nm, Intel 34nm and Micron 35nm.
- Either SLC, 2pc MLC and 3bpc MLC.
- Kinds of page size: 2KB large-page, 4KB large-page and 8KB large-page.
- Kinds of plane: Single-plane and Two-plane.

。 NAND Interface:
- Dual channel (x16 data width) and 4 CE/channel for Standard NAND.
- Dual channel (x16 data width) and 16 CE/channel for Standard NAND.
- Single channel (x8 data width) and 8 CE/channel for Standard NAND.
- Single channel (x8 data width) and 8 CE/channel for DDR NAND.
- Up to 256GB addressing space.

。 Enable Multi-Partition features:
- One Read-only Partition, two Read-Write Partitions and one Hidden Partition.
- Read-only Partition is designated for AutoRun feature.
- UFD can have up to two LUNs due to two Read-Write Partitions.
- Each Read-Write Partition can be divided into Public Zone and Private Zone further.
- Private Zone can be protected by password.
- Capacity of each Partition and Zone can sizeable while factory initialization or by application program through vendor specific command.

。 Configurable VID, PID, vendor name and product name.
LED indication of UFD operating status and programmable blinking rate.
Write-Protect feature to protect all UFD data from writing or erasing.

[ 本帖最后由 tiengulden 于 2010-5-18 10:12 编辑 ]

pazh3336

FLASH挺不错的。

boiu

不支持 K9ABG08U0A_26M的

wenyouliang

好像此款主控不支持CDROM，我量産也出現41 0類似錯誤

tiengulden

还是原来那个群联＋东芝的好，写速度接近一些高速U盘

jjsfm

交错路径取决于flash型号，不是量产工具版本的问题，只能这样了。

tiengulden

原帖由 jjsfm 于 2010-5-19 13:54 发表
现在速度还算正常，如果能支持增加交错路径（外部interleave）可能速度会更快。

可惜交错路径只能设置为None，下一个版本的工具会否允许设置呢？

jjsfm

现在速度还算正常，如果能支持增加交错路径（外部interleave）可能速度会更快。

tiengulden

说到速度就很杯具了……


俺起先很怀疑是假货，拆开一看不像是假货，现在怀疑是个坏货！

[ 本帖最后由 tiengulden 于 2010-5-19 13:45 编辑 ]

jjsfm

按提示是格式化分区错误，我手上没这款，需要看看其他同学有否分三驱成功的，因此暂时存疑；能支持双通道也不错，不知量产后读写速度如何，能不能测一下？

tiengulden

???

jjsfm

原帖由 tiengulden 于 2010-5-19 11:04 发表
按上面设置可以量产成功
但是不能量产成双驱

应该可以，莫非类似6281，出现AB支持AA不支持CD-ROM的情况？

[ 本帖最后由 jjsfm 于 2010-5-19 19:58 编辑 ]

tiengulden

按上面设置可以量产成功


但是无法双驱量产


[ 本帖最后由 tiengulden 于 2010-5-19 11:14 编辑 ]

jjsfm

先按下面设置点“ok”，后续有疑问继续上图~

tiengulden

获取的结果
=======================================
SK6213AA
Flash Part No.: K9BCG08U1M_8mA
Total Flash Size: 8412 MB
8K Page, MLC
Flash ID 01: 0xEC 0xD7 0x98 0xC6 0x54
Flash ID 02: 0xEC 0xD7 0x98 0xC6 0x54
Flash ID 03: 0x00 0x00 0x00 0x00 0x00
Flash ID 04: 0x00 0x00 0x00 0x00 0x00
Flash ID 05: 0x00 0x00 0x00 0x00 0x00
Flash ID 06: 0x00 0x00 0x00 0x00 0x00
Flash ID 07: 0x00 0x00 0x00 0x00 0x00
Flash ID 08: 0x00 0x00 0x00 0x00 0x00
Flash ID 09: 0x00 0x00 0x00 0x00 0x00
Flash ID 10: 0x00 0x00 0x00 0x00 0x00
Flash ID 11: 0x00 0x00 0x00 0x00 0x00
Flash ID 12: 0x00 0x00 0x00 0x00 0x00
Flash ID 13: 0x00 0x00 0x00 0x00 0x00
Flash ID 14: 0x00 0x00 0x00 0x00 0x00
Flash ID 15: 0x00 0x00 0x00 0x00 0x00
Flash ID 16: 0x00 0x00 0x00 0x00 0x00
Flash ID 17: 0x00 0x00 0x00 0x00 0x00
Flash ID 18: 0x00 0x00 0x00 0x00 0x00
Flash ID 19: 0x00 0x00 0x00 0x00 0x00
Flash ID 20: 0x00 0x00 0x00 0x00 0x00
Flash ID 21: 0x00 0x00 0x00 0x00 0x00
Flash ID 22: 0x00 0x00 0x00 0x00 0x00
Flash ID 23: 0x00 0x00 0x00 0x00 0x00
Flash ID 24: 0x00 0x00 0x00 0x00 0x00
Flash ID 25: 0x00 0x00 0x00 0x00 0x00
Flash ID 26: 0x00 0x00 0x00 0x00 0x00
Flash ID 27: 0x00 0x00 0x00 0x00 0x00
Flash ID 28: 0x00 0x00 0x00 0x00 0x00
Flash ID 29: 0x00 0x00 0x00 0x00 0x00
Flash ID 30: 0x00 0x00 0x00 0x00 0x00
Flash ID 31: 0x00 0x00 0x00 0x00 0x00
Flash ID 32: 0x00 0x00 0x00 0x00 0x00
Part name: K9BCG08U1M_EDO
CodeBank: C091106A_F090903A
CodeSwap: 10 26
Codeswap CRC: 40463
FDM CRC: 4126288255
CodeBank CRC: 3909705204
Production date and time: Thu Apr 01 17:01:55 2010

Config Name: K9BCG08U1M_dual
PDT Version: SK6213_PDT_20091118_Beta1
VID: 09 51
PID: 16 24
Vendor Name: Kingston
Product Name: DataTraveler G2
Revision: 1.00
Serial Number: 0026184A63F8AA4012CF05C3
Channel: Word Mode
Plane(s): 2
Internal Interleave: Disable
External Interleave: Disable
tRc/tWc: 33.33 ns (30 Mhz)
Max Current: 100 mA
Real Density: (0 MB)
Error Code: 0 0
=======================================


是否需要设定参数呢？

[ 本帖最后由 tiengulden 于 2010-5-19 09:08 编辑 ]

jjsfm

“选择设定档”下拉到K9BCG08U1M_8mA，双击检测框下方文字，获取info来看看。

tiengulden

"支持TLC:Samsung-K9ABG08U0A，Samsung-K9ABG08U1A这2款FLASH"
???
俺这个不是这两款闪存啊

[ 本帖最后由 tiengulden 于 2010-5-19 08:04 编辑 ]

jjsfm

http://www.upan.cc/tools/mass/2010/SK6213_PDT_20100209A_Maxell.html
http://bbs.mydigit.cn/read.php?tid=174771