无忧启动论坛

标题: Acronis True Image 2019, 2018, 2017, 2016 PE and ISO; Acronis Backup 11.7 PE [打印本页]
作者: 2012mshs    时间: 2015-8-22 13:17
标题: Acronis True Image 2019, 2018, 2017, 2016 PE and ISO; Acronis Backup 11.7 PE
本帖最后由 2012mshs 于 2018-10-1 22:45 编辑

I was make new version Acronis True Image 2018, 2017, 2016 PE and ISO
You can boot in UEFI mode with grub2. Use this code in menu

  2. menuentry "Acronis True Image Home 2018 ISO" {
  3. set quiet=1
  4. set gfxpayload=1024x768x32,1024x768
  5. set mbrcrcs=on
  6. set isofile="/iso/ati18cn.iso"
  7. search --set -f $isofile
  8. loopback loop $isofile
  9. linux (loop,msdos1)/dat10.dat lang=zh_CN quiet force_modules=usbhid
  10. initrd (loop,msdos1)/dat11.dat (loop,msdos1)/dat12.dat
  11. boot
  12. }
  13. menuentry "Acronis True Image Home 2018 ISO ElTorito" {
  14. set quiet=1
  15. set gfxpayload=1024x768x32,1024x768
  16. set mbrcrcs=on
  17. set isofile="/iso/ati18cn.iso"
  18. search --set -f $isofile
  19. loopback loop $isofile
  20. echo mount the El Torito floppy image
  21. loopback ElTorito (loop)232+224000
  22. #ls (ElTorito)/
  23. linux (ElTorito)/dat10.dat lang=zh_CN quiet force_modules=usbhid
  24. initrd (ElTorito)/dat11.dat (ElTorito)/dat12.dat
  25. boot
  26. }

  28. menuentry "Acronis True Image Home 2017 ISO" {
  29. set quiet=1
  30. set gfxpayload=1024x768x32,1024x768
  31. set mbrcrcs=on
  32. set isofile="/iso/ati17cn.iso"
  33. search --set -f $isofile
  34. loopback loop $isofile
  35. linux (loop,msdos1)/dat10.dat lang=zh_CN quiet force_modules=usbhid
  36. initrd (loop,msdos1)/dat11.dat (loop,msdos1)/dat12.dat
  37. boot
  38. }
  39. menuentry "Acronis True Image Home 2017 ISO ElTorito" {
  40. set quiet=1
  41. set gfxpayload=1024x768x32,1024x768
  42. set mbrcrcs=on
  43. set isofile="/iso/ati17cn.iso"
  44. search --set -f $isofile
  45. loopback loop $isofile
  46. echo mount the El Torito floppy image
  47. loopback ElTorito (loop)232+208000
  48. #ls (ElTorito)/
  49. linux (ElTorito)/dat10.dat lang=zh_CN quiet force_modules=usbhid
  50. initrd (ElTorito)/dat11.dat (ElTorito)/dat12.dat
  51. boot
  52. }

  54. menuentry "Acronis True Image Home 2016 ISO ElTorito" {
  55. set quiet=1
  56. set gfxpayload=1024x768x32,1024x768
  57. set mbrcrcs=on
  58. set isofile="/iso/ati16.iso"
  59. search --set -f $isofile
  60. loopback loop $isofile
  61. echo mount the El Torito floppy image
  62. loopback ElTorito (loop)232+184000
  63. #ls (ElTorito)/
  64. linux (ElTorito)/dat10.dat lang=13 quiet force_modules=usbhid
  65. initrd (ElTorito)/dat11.dat (ElTorito)/dat12.dat
  66. boot
  67. }

  69. menuentry "Acronis True Image Home 2016 ISO" {
  70. set quiet=1
  71. set gfxpayload=1024x768x32,1024x768
  72. set mbrcrcs=on
  73. set isofile="/iso/ati16.iso"
  74. search --set -f $isofile
  75. loopback loop $isofile
  76. linux (loop,msdos1)/dat10.dat lang=13 quiet force_modules=usbhid
  77. initrd (loop,msdos1)/dat11.dat (loop,msdos1)/dat12.dat
  78. boot
  79. }

  81. menuentry "Acronis True Image Home 2016 - Extract ISO" {
  82. linux /acronis/dat10.dat lang=13 vga=791 mbrcrcs=on quiet force_modules=usbhid
  83. initrd /acronis/dat11.dat /acronis/dat12.dat
  84. boot
  85. }

  87. menuentry "Acronis Disk Director Home 12 ISO ElTorito" {
  88. set quiet=1
  89. set gfxpayload=1024x768x32,1024x768
  90. set mbrcrcs=on
  91. set isofile="/iso/add12.iso"
  92. search --set -f $isofile
  93. loopback loop $isofile
  94. echo mount the El Torito floppy image
  95. loopback ElTorito (loop)220+161792
  96. #ls (ElTorito)/
  97. linux (ElTorito)/dat5.dat quiet
  98. initrd (ElTorito)/dat4.dat
  99. boot
  100. }

  102. menuentry "Acronis Backup Advanced 11.7" {
  103. set quiet=1
  104. set gfxpayload=1024x768x32,1024x768
  105. set mbrcrcs=on
  106. set isofile="/iso/abr11cn.iso"
  107. search --set -f $isofile
  108. loopback loop $isofile
  109. loopback ElTorito (loop)228+368000
  110. #ls (ElTorito)/
  111. linux (ElTorito)/abr64ker.dat product=bootagent media_for_windows quiet
  112. initrd (ElTorito)/abr64ram.dat (ElTorito)/dat8.dat
  113. boot
  114. }

  116. menuentry "Acronis Snap Deploy 5 Standalone Utility" {
  117. set quiet=1
  118. set gfxpayload=1024x768x32,1024x768
  119. set mbrcrcs=on
  120. set isofile="/iso/asd5s.iso"
  121. search --set -f $isofile
  122. loopback loop $isofile
  123. echo mount the El Torito floppy image
  124. loopback ElTorito (loop)208+154000
  125. #ls (ElTorito)/
  126. linux (ElTorito)/dat4.dat quiet
  127. initrd (ElTorito)/dat5.dat
  128. boot
  129. }

  131. menuentry "Acronis Snap Deploy 5 Master Image Creator" {
  132. set quiet=1
  133. set gfxpayload=1024x768x32,1024x768
  134. set mbrcrcs=on
  135. set isofile="/iso/asd5m.iso"
  136. search --set -f $isofile
  137. loopback loop $isofile
  138. echo mount the El Torito floppy image
  139. loopback ElTorito (loop)208+146000
  140. #ls (ElTorito)/
  141. linux (ElTorito)/dat8.dat quiet
  142. initrd (ElTorito)/dat9.dat
  143. boot
  144. }

  146. menuentry "Acronis Snap Deploy 5 Agent" {
  147. set quiet=1
  148. set gfxpayload=1024x768x32,1024x768
  149. set mbrcrcs=on
  150. set isofile="/iso/asd5a.iso"
  151. search --set -f $isofile
  152. loopback loop $isofile
  153. echo mount the El Torito floppy image
  154. loopback ElTorito (loop)208+148000
  155. #ls (ElTorito)/
  156. linux (ElTorito)/dat16.dat quiet
  157. initrd (ElTorito)/dat17.dat
  158. boot
  159. }
复制代码

Multi Language code (for version 2017)
- PE

  2. - Wellcome test: Change value language=en to region code (zh_CN only need zh...)
复制代码

- ISO: Use region code (can found when change region from acronis website)
 Edit file BOOTIA32.XML, BOOTX64.XML;
  1. Arguments="  lang=zh_CN; quiet"
复制代码

BOOTWIZ.CFG
  1. KERNEL dat10.dat lang=zh_CN force_modules=usbhid quiet
复制代码

Multi Language code (for version 2016) (thanks waterchu for ideas)
- PE

  2. REG.exe Add HKLM\Software\Acronis /f /v "language" /T REG_DWORD /D "13"
  3. ...............DWORD.............
  4. 1-ENGLISH; 11-BRAZIL; 13-CHINESE; 14-CHINESET; 8-CZECH; 6-DUTCH; 27-ESPANA; 2-GERMAN; 25-INDIAN; 15-ITALIAN; 9-JAPAN; 3-KOREAN; 5-POLISH; 19-PORTUGUESE; 0-RUSSIAN; 12-SPANISH; 17-FRENCH
复制代码

- ISO: Edit file BOOTIA32.XML, BOOTX64.XML;
  1. Arguments="  lang=13; quiet"
复制代码

BOOTWIZ.CFG
  1. KERNEL dat10.dat lang=13 force_modules=usbhid quiet
复制代码

If Extract ISO and boot with Grub4dos

  2. title Acronis True Image 2016
  3. find --set-root --ignore-floppies --ignore-cd /acronis/dat10.dat
  4. kernel /acronis/dat10.dat lang=13 vga=791 mbrcrcs=on force_modules=usbhid quiet
  5. initrd /acronis/dat11.dat /acronis/dat12.dat
复制代码

If try with Recovery Manager (F11), only need extract folder Recovery Manager from original ISO
  1. ..........Grub2 (Boot with grub2 can use Recovery Manager)
  2. menuentry "Acronis True Image Home 2016 - F11" {
  3. linux /Recovery\ Manager/kernel64.dat lang=13 vga=791 mbrcrcs=on force_modules=usbhid quiet
  4. initrd /Recovery\ Manager/ramdisk_merged64.dat /Recovery\ Manager/DAT12.DAT
  5. boot
  6. }
  7. ....................Grub4dos............
  8. title Acronis True Image Home 2016 - F11
  9. find --set-root --ignore-floppies --ignore-cd /Recovery\ Manager/kernel.dat
  10. kernel /Recovery\ Manager/kernel64.dat lang=13 vga=791 mbrcrcs=on force_modules=usbhid quiet
  11. initrd /Recovery\ Manager/ramdisk_merged64.dat /Recovery\ Manager/DAT12.DAT
复制代码

Link:
Acronis True Image 2019 PE
https://mega.nz/#!voBQRQTT!uOL8i ... crkvLjQcArv84kATico
Acronis True Image 2018 PE
https://pan.baidu.com/s/1eRWSw50
Acronis True Image 2018 ISO
https://pan.baidu.com/s/1o8rAOo6
Acronis True Image 2017 PE
http://pan.baidu.com/s/1i4JgeTf
Acronis True Image 2017 ISO
http://pan.baidu.com/s/1jIxF8cY
http://pan.baidu.com/s/1skH3RLb
Acronis True Image 2016 PE(CN)
http://pan.baidu.com/s/1c2zRdTY
Acronis True Image 2016 ISO (CN)
http://pan.baidu.com/s/1o8sfhNW
Activator nova-s for installer version
http://pan.baidu.com/s/1qY2Tg5Y
Acronis Backup 11.7 PE&ISO (CN - Build 50064)
https://pan.baidu.com/s/1qYr25Uc
https://pan.baidu.com/s/1jHQAxL0
https://pan.baidu.com/s/1c1HZjSs
Acronis Backup 12 Beta for PE (English)
http://pan.baidu.com/s/1i5jS1sp
http://pan.baidu.com/s/1jIlStXs

For old acronis version, need replace new driver (Snapapi64.dll only for Acronis True Image 2015, Disk Director 2012x64 - delete old snapapi.dll, copy and rename snapapi64.dll to snapapi.dll)
http://pan.baidu.com/s/1kTD8Jnp
If you try use on real system, try to uninstall driver first. If 64bit, use Fltsrv64. Right Click on snapman_uninstall.inf, fltsrv_uninstall.inf and select Install. Also you can update snapman & Flisrv driver.
http://pan.baidu.com/s/1i3m80rN
Some English version
Acronis Disk Director 12 ISO (English - Build 3270)
http://pan.baidu.com/s/1i33vRRf
Acronis Snap deploy 5 mini version
- Master image: http://pan.baidu.com/s/1miuMLEo
- Standalone Utility: http://pan.baidu.com/s/1slwE4OX
- Agent: http://pan.baidu.com/s/1o8Hdz6q
-TIB shell: Open TIB file in windows explorer
http://pan.baidu.com/s/1sk9MvNn
Aomei Partition Assistant 6.5
http://pan.baidu.com/s/1bJxTp0
Try test and report! :D

ABR11_FIX.7z

4.45 KB, 下载次数: 301, 下载积分: 无忧币 -2

作者: shuren    时间: 2015-8-22 14:16
Thank you very much! Have a Test.
作者: 1400700226    时间: 2015-8-22 14:43
本帖最后由 1400700226 于 2015-8-22 14:44 编辑

This is stable version？
作者: gy0715    时间: 2015-8-22 15:08
win7 x64运行报错

作者: shuren    时间: 2015-8-22 15:18
已安装了ATIH6614V PE版的Windows Server 2008 R2的64位系统，先启动到安全模式卸载ATIH6614V PE版。再以管理员安装ATIH2016_x64.exe，启动ATIH2016仍然失败。

作者: 2012mshs    时间: 2015-8-22 15:24
本帖最后由 2012mshs 于 2015-8-22 15:54 编辑

ERROR_SERVICE_EXISTS
1073 (0x431)
The specified service already exists.
- Try build PE without snapman, fltsr services
- Or: Rebuild with new snapman.sys, fltsrv.sys, snapapi.dll
If you try use on real system, try to uninstall driver first. If 64bit, use Fltsrv64. Right Click on snapman_uninstall.inf, fltsrv_uninstall.inf and select Install. Also you can update snapman & Flisrv driver.
http://pan.baidu.com/s/1qWHuMeC
作者: 2012mshs    时间: 2015-8-22 15:37
本帖最后由 2012mshs 于 2015-8-22 15:55 编辑

ATIH6614V PE: You should replace with new driver
http://pan.baidu.com/s/1jGGRc4A
If you try use on real system, try to uninstall driver first. If 64bit, use Fltsrv64. Right Click on snapman_uninstall.inf, fltsrv_uninstall.inf and select Install. Also you can update snapman & Flisrv driver.
http://pan.baidu.com/s/1qWHuMeC
作者: shuren    时间: 2015-8-22 16:03
2012mshs 发表于 2015-8-22 15:37
ATIH6614V PE: You should replace with new driver
http://pan.baidu.com/s/1jGGRc4A
If you try use on ...

Thank you, tye it again
作者: shuren    时间: 2015-8-22 16:20
本帖最后由 shuren 于 2015-8-22 16:27 编辑
2012mshs 发表于 2015-8-22 15:37
ATIH6614V PE: You should replace with new driver
http://pan.baidu.com/s/1jGGRc4A
If you try use on ...


First, Right Click on \Uninstall\fltsrv64\fltsrv_update.inf, update snapman & Flisrv driver.
Then, run CMD as administrator, run \ATIH2016_x64\acronis.cmd to install.
Finally, run \ATIH2016_x64\TrueImage.exe successfully.

Thank you very much! It have successfully already installed.

作者: 2012mshs    时间: 2015-8-22 16:41
asky800 发表于 2015-8-22 14:50
有中文版吗?

It seems multi language. You should try in chinese PE.
作者: 2012mshs    时间: 2015-8-22 16:42
shuren 发表于 2015-8-22 16:20
First, Right Click on %uninstall\fltsrv64\fltsrv_update.inf, update snapman & Flisrv driver.
Th ...

I was forgot run as Administrator. :)
作者: 2012mshs    时间: 2015-8-22 18:26
@hyde777: I was update:
- Acronis True Image 2016 ISO (English)
- Acronis Disk Director 12 ISO (English)
- Acronis Backup Advanced PC ISO (English)
and all code in grub2 menu. Try test it!
作者: hyde777    时间: 2015-8-22 21:14
friend Where are you from?
作者: hyde777    时间: 2015-8-22 21:15
Thank you very much!
作者: shuren    时间: 2015-8-22 21:35
本帖最后由 shuren 于 2015-8-22 22:06 编辑

Win10中卸载ATIH6614V后，安装ATI2016.5518-OK
========================================================================

经测试，在Windows 10中能够正常安装ATI2016 19.0.5518。但是必须注意：安装后也必须以Run as administrator才能正常启动TrueImage.exe。
在桌面上建立的快捷方式也必须设置Run as administrator才能正常启动，否则会报错。见下图：

Windows 10下面安装ATI2016 19.0.5518多语言64位WINPE专用版后。建立的快捷方式必须设置Run as administrator才能正常启动，否则会报错

========================================================================
若Windows 10中已经安装ATIH6614V，不用启动到安全模式，可以在Windows 10正常启动后直接运行
\Program Files\ATIH6614V\install.exe，选择uninstall卸载即可。

卸载ATIH6614V后，可以马上就在Windows 10中运行
\Program Files\ATI5518\install.exe进行安装。
但是必须注意：安装后也必须以Run as administrator才能正常启动TrueImage.exe。
在桌面上建立的快捷方式也必须设置Run as administrator才能正常启动，否则会报错。

========================================================================

作者: alakee    时间: 2015-8-23 12:09
这是单个ISO吗？
作者: yjcqm    时间: 2015-8-23 15:29
Thank you very muc
作者: yjcqm    时间: 2015-8-23 15:30
Thank you very much
作者: 2012mshs    时间: 2015-8-23 16:04
alakee 发表于 2015-8-23 12:09
这是单个ISO吗？

Only mini ISO (ENG, CN, TW). Full ISO with Recovery Manager
http://dl.acronis.com/s/AcronisTrueImage2016_5518.iso
Multi language.
作者: ali88home    时间: 2015-8-24 00:35
You can boot in UEFI mode with grub2. Use this code in menu

三个ISO使用GRUB菜单初步简单测试了，ATI.iso and ADD.iso是OK，but 测试 abr.iso 却失败，信息显示需要再设定，grub2加载iso的方式，速度和启动不是很稳定和理想，还是比较喜欢by Spadek PE版本。
作者: 2012mshs    时间: 2015-8-24 08:29
本帖最后由 2012mshs 于 2015-8-24 10:22 编辑
ali88home 发表于 2015-8-24 00:35
You can boot in UEFI mode with grub2. Use this code in menu

三个ISO使用GRUB菜单初步简单测试了，AT ...


- Acronis Backup Advanced PC 11.5 - Build 43994 PE version has more bug. Only use old ABR39029 PE.
- ISO loading seems slow. If you do not use uefi, please use grub4dos.
Or with new file (I forgot sgn9.sgn)
http://pan.baidu.com/s/1wOHyu
作者: ali88home    时间: 2015-8-24 13:17
2012mshs 发表于 2015-8-24 08:29
- Acronis Backup Advanced PC 11.5 - Build 43994 PE version has more bug. Only use old ABR39029 P ...

谢谢！

再一次使用UEFI-grub2菜单方式简单测试ABR.iso，结果是ok

不过，可能是加载ISO的原因，内存使用率高，速度慢了一些，操作过程还是可以的。
作者: 2012mshs    时间: 2015-8-28 12:29
Update Acronis True Image 2016 build 5576 PE, ISO. Code boot with grub2 change. Older version need replace driver, update fltsrv & snapman driver. :D
作者: mmnn606    时间: 2015-8-29 11:55
PE版是不是也可以解压后运行呢
作者: 2012mshs    时间: 2015-8-29 12:25
mmnn606 发表于 2015-8-29 11:55
PE版是不是也可以解压后运行呢

- Update or uninstall snapman & fltsrv driver
- No need unpack file exe, simple run it.
作者: Seifer    时间: 2015-8-29 14:23
可以教一下ATI mini ISO 怎樣製作的？

謝謝
作者: 2012mshs    时间: 2015-8-29 17:32
Seifer 发表于 2015-8-29 14:23
可以教一下ATI mini ISO 怎樣製作的？

謝謝

Yes, only min ISO. :D
作者: dcbakkk    时间: 2015-8-31 19:18
Thanks, Mark it!
作者: neojin    时间: 2015-9-1 01:06
thank you for sharing
作者: 2012hzy6420    时间: 2015-9-1 07:34
xxfxxxfx
作者: 2011shenql    时间: 2015-9-1 16:18
不错，下来试试，
百度网盘分享已经取消，请重新分享，谢谢
作者: 2012mshs    时间: 2015-9-1 18:34
2011shenql 发表于 2015-9-1 16:18
不错，下来试试，
百度网盘分享已经取消，请重新分享，谢谢

Ok, :D
http://pan.baidu.com/s/1ntCbXXZ
作者: ddianxing    时间: 2015-9-1 23:21
亲测，win7 Enterprise 64-Bit 下可以使用PE版。
作者: boy6585948    时间: 2015-9-9 10:54
UEFI多启动菜单的PE现在好少啊！！！
作者: boy6585948    时间: 2015-9-9 10:57
现在都是基于Linux来开发的么？？？
作者: dcbakkk    时间: 2015-9-12 00:54
Hope you can release x86 verison.
作者: 2012mshs    时间: 2015-9-12 13:54
dcbakkk 发表于 2015-9-12 00:54
Hope you can release x86 verison.

Waiting Acronis support PE plugin! :)
作者: 2012mshs    时间: 2015-9-12 13:55
boy6585948 发表于 2015-9-9 10:57
现在都是基于Linux来开发的么？？？

Only Mini version, also support UEFI (32&64bit)
作者: dcbakkk    时间: 2015-9-14 14:33
本帖最后由 dcbakkk 于 2015-9-14 14:36 编辑
2012mshs 发表于 2015-9-12 13:54
Waiting Acronis support PE plugin! :)


I burned it to USB Flash, but I found it can not be started via my x86 Tablet(Model:Teclast X16HD 3G), don't know why. Might require 32-bit PE.
作者: 2012mshs    时间: 2015-9-15 19:37
本帖最后由 2012mshs 于 2015-9-15 19:52 编辑
dcbakkk 发表于 2015-9-14 14:33
I burned it to USB Flash, but I found it can not be started via my x86 Tablet(Model:Teclast X16H ...


If you burn it to USB Flash, please use this
http://pan.baidu.com/s/1hqIYCJU
only extract it to USB (require FAT32 format).
作者: dcbakkk    时间: 2015-9-16 13:16
2012mshs 发表于 2015-9-15 19:37
If you burn it to USB Flash, please use this
http://pan.baidu.com/s/1hqIYCJU
only extract it t ...

Thanks, I'll try it.
作者: 2012mshs    时间: 2015-9-16 19:24
Update Acronis True Image 2016 build 5620 PE & ISO. Code boot grub2 change.
作者: 土著007    时间: 2015-9-16 19:43
更新得挺勤的，楼主也很勤快，赞
作者: yjcqm    时间: 2015-9-16 22:28
感谢分享！
作者: Roosevelt122007    时间: 2015-9-17 14:05
Hi,


I met 2 issues, can you help me?
1.  With Grub2,  use your  ati16cn.iso(86MB), it can boot normally,  but if I replace it with official ISO (517MB),  it will indicate unkown filesystem,  can you tell me what's the difference??
2.  Where can I get 5620 mini ISO, or how can I create it??



Thanks a lot!
作者: 2012mshs    时间: 2015-9-17 22:57
Roosevelt122007 发表于 2015-9-17 14:05
Hi,

- ATIH 5620 mini ISO
http://pan.baidu.com/s/1gdErakN

  2. menuentry "Acronis True Image Home 2016 ISO ElTorito" {
  3. set quiet=1
  4. set gfxpayload=1024x768x32,1024x768
  5. set mbrcrcs=on
  6. set isofile="/iso/ati16m.iso"
  7. search --set -f $isofile
  8. loopback loop $isofile
  9. echo mount the El Torito floppy image
  10. loopback ElTorito (loop)232+176000
  11. #ls (ElTorito)/
  12. linux (ElTorito)/dat10.dat lang=13 quiet force_modules=usbhid
  13. initrd (ElTorito)/dat11.dat (ElTorito)/dat12.dat
  14. boot
  15. }
复制代码

- With original ISO, try with this code

  2. menuentry "Acronis True Image Home 2016 ISO" {
  3. set quiet=1
  4. set gfxpayload=1024x768x32,1024x768
  5. set mbrcrcs=on
  6. set isofile="/iso/ati16.iso"
  7. search --set -f $isofile
  8. loopback loop $isofile
  9. linux (loop,msdos1)/dat10.dat lang=13 quiet force_modules=usbhid
  10. initrd (loop,msdos1)/dat11.dat (loop,msdos1)/dat12.dat
  11. boot
  12. }
复制代码
作者: 步惊云    时间: 2015-9-18 01:01
感谢楼主的分享，下载有空测试。
作者: Roosevelt122007    时间: 2015-9-18 09:26
2012mshs 发表于 2015-9-17 22:57
- ATIH 5620 mini ISO
http://pan.baidu.com/s/1gdErakN

Thanks for your reply, I will try it and update my result!

Thanks aggain!
作者: Roosevelt122007    时间: 2015-9-18 15:30
2012mshs 发表于 2015-9-17 22:57
- ATIH 5620 mini ISO
http://pan.baidu.com/s/1gdErakN

I  had tried it, and all is OK!


Thanks for your help!
作者: 2012mshs    时间: 2015-9-18 18:17
Roosevelt122007 发表于 2015-9-18 15:30
I  had tried it, and all is OK!

For best, Only needs extract dat10, dat11, dat12. And boot with grub4dos or grub2 (no high memory use)
作者: 2012mshs    时间: 2015-9-18 21:21
I was add more tips for use Acronis True Image 2016. Please read at first page. :)
作者: Roosevelt122007    时间: 2015-9-21 09:41
2012mshs 发表于 2015-9-18 18:17
For best, Only needs extract dat10, dat11, dat12. And boot with grub4dos or grub2 (no high memory  ...

Hi 2012mshs,


Well,  I have tried it with Grub4Dos in fact,
And when boot, it will hang on decompress kernel phase...
it display message "Please press Enter to activate this console.", but press enter no responds, so I think mapping ISO will be better silution.

The only concern is that, if use full ISO file, it will take more than 500MB size and will cost more memory),  I have to use mini ISO file, but I have no idea how to create a mini ISO (86MB as you createed),  can you share me the method how to create a mini ISO file ?

Thanks!

作者: 2012mshs    时间: 2015-9-21 11:48
Roosevelt122007 发表于 2015-9-21 09:41
Hi 2012mshs,

Some machine will error, but pleses don't test it with QEMU.
P/s: Can you help me test with Recover Manager (F11) in UEFI bios with Grub2 or with burn Acronis rescue media? In Legacy bios, it can active F11.
For mini ISO, I will tell with you how to make it.
作者: boy6585948    时间: 2015-9-21 13:30
给力啊，先收藏了！！！
作者: boy6585948    时间: 2015-9-21 13:30
目前有人测试过么？？？
作者: Roosevelt122007    时间: 2015-9-21 13:50
本帖最后由 Roosevelt122007 于 2015-9-21 13:55 编辑
2012mshs 发表于 2015-9-21 11:48
Some machine will error, but pleses don't test it with QEMU.
P/s: Can you help me test with Recov ...


Hi,  it can work!!!!




The previous error is becuse of I don't put dat12 file into recovery file folder.
作者: 2012mshs    时间: 2015-9-21 14:16
本帖最后由 2012mshs 于 2015-9-21 14:21 编辑
Roosevelt122007 发表于 2015-9-21 13:50
Hi,  it can work!!!!


Small question
- Grub4dos: Do you test it in real system with out map ISO to memory?. With me, it works but slower than map iso to memory.
- Do you test F11 funtion on UEFI with two ways? (use  Grub2 or acronis uefi loader)
P/s: ISO & IMG maker by SpadeK. For small, delete some file no need
http://www.ctfile.com/file/79894744
作者: 2012mshs    时间: 2015-9-22 10:38
Roosevelt122007 发表于 2015-9-21 13:50
Hi,  it can work!!!!

Small question
- Grub4dos: Do you test it in real system with out map ISO to memory?. With me, it works but slower than map iso to memory.
- Do you test F11 funtion on UEFI with two ways? (use  Grub2 or acronis uefi loader)
P/s: ISO & IMG maker by SpadeK. For small, delete some file no need
http://www.ctfile.com/file/79894744
作者: 残荷    时间: 2015-9-23 11:47
能直接提供一个Acronis True Image 2016 PE and ISO (Build 5620)简体中文版可以吗？那些代码看不懂，当然更不知如何使用了。
作者: HIGH-Q    时间: 2015-9-23 12:04
新發佈版本是 Acronis True Image 2016 Build 5628 喔,
版大是否接著更新...感謝
作者: 2012mshs    时间: 2015-9-23 12:07
HIGH-Q 发表于 2015-9-23 12:04
新發佈版本是 Acronis True Image 2016 Build 5628 喔,
版大是否接著更新...感謝

Update to version 5628. Nothing change for PE.
作者: 2012mshs    时间: 2015-9-23 12:09
残荷 发表于 2015-9-23 11:47
能直接提供一个Acronis True Image 2016 PE and ISO (Build 5620)简体中文版可以吗？那些代码看不懂，当然 ...

Tell with me more. It's very easy
作者: 残荷    时间: 2015-9-23 14:49
我用ati16m.iso替换了我原来U盘启动中的ATI2014.iso中文版，但启动后的ATI2016 5620版是英文版的看不懂，所以我想要一个ATI2016 5620.iso中文版，或能启动的ATI2016 5620.IMG中文版。
作者: 2012mshs    时间: 2015-9-23 15:57
残荷 发表于 2015-9-23 14:49
我用ati16m.iso替换了我原来U盘启动中的ATI2014.iso中文版，但启动后的ATI2016 5620版是英文版的看不懂，所 ...

Seems you use grub4dos, not Grub2. With grub4dos, only change language with menu.lst for extract iso (img). Without extract it, you need change in file BOOTWIZ.CFG. This line
[code]
KERNEL dat10.dat lang=13 force_modules=usbhid quiet
[code]
13-Chinese; 14-Chineset.
作者: 土著007    时间: 2015-9-23 20:26
谢谢！不过，Acronis最近更新挺频繁的，难道有很多BUG
作者: HIGH-Q    时间: 2015-9-24 09:38
2012mshs 大大, Acronis 又更新了 (BUILD 5634),
好不容易整好提供的 5628 PE, 真的是 ^&%%*%...
不過還是感謝大大...
作者: 2012mshs    时间: 2015-9-24 10:51
HIGH-Q 发表于 2015-9-24 09:38
2012mshs 大大, Acronis 又更新了 (BUILD 5634),
好不容易整好提供的 5628 PE, 真的是 ^&%%*%...
不過還 ...

Daily update! But nothing change for PE version.
作者: tdqk003    时间: 2015-9-24 21:09
2012mshs 发表于 2015-9-24 10:51
Daily update! But nothing change for PE version.

ISO版本下载不了，请大师更新一下啊
作者: 2012mshs    时间: 2015-9-25 10:02
tdqk003 发表于 2015-9-24 21:09
ISO版本下载不了，请大师更新一下啊

You can get it here
http://pan.baidu.com/s/1o6IMXFO
作者: aaa888    时间: 2015-9-25 10:08
楼主能否单独分享能破解激活ATI2016 5628版本的ActivatorAcronisTIH.exe ？
作者: 2012mshs    时间: 2015-9-25 11:48
本帖最后由 2012mshs 于 2015-9-25 11:51 编辑
aaa888 发表于 2015-9-25 10:08
楼主能否单独分享能破解激活ATI2016 5628版本的ActivatorAcronisTIH.exe ？


You can get it here
http://pan.baidu.com/s/1i3HBmiL
Note: If you was install ATIH
- Change key
- Run ActivatorAcronisTIH.exe
作者: tdqk003    时间: 2015-9-27 12:40
2012mshs 发表于 2015-9-25 10:02
You can get it here
http://pan.baidu.com/s/1o6IMXFO

非常感谢大师回复，我还有一个问题，我用最新的三分区法把优盘三分区了  ，分别是ud+exfat+uefi（fat32），我把AcronisBootableMedia.iso放在可见去（exfat），还有放在了ud区，一开始都能够在dell服务器上引导，可是过几天后，就没法引导了，在普通pc机上能引导进入Acronis True Image 2016程序界面然后能够添加新硬盘，恢复镜像，可是在dell服务器上一开始可以，后来就不行了，请问是不是要解开iso然后再引导吗，我用BURG引导过，也是一样 ，一开始可以  。后来就不行了  ，进不了Acronis True Image 2016程序界面。我的BURG菜单如下：
menuentry "         ------------------>>>loading ATI5634<<<--------------------- " --class windows {
search -s -f /IMGs/ATI5634.iso
map  --set /IMGs/ATI5634.iso (cd96)
cdload --image=0 ($root)
}

请问我这样写有什么不对，宁外如果要解开ISO引导菜单要怎么写。

非常感谢您的指点，再次期待您的答复 ，非常感谢
作者: 2012mshs    时间: 2015-9-27 14:02
tdqk003 发表于 2015-9-27 12:40
非常感谢大师回复，我还有一个问题，我用最新的三分区法把优盘三分区了  ，分别是ud+exfat+uefi（fat32） ...

It seems for grub4dos (map, cdload). Or can you capture a picture?
作者: tdqk003    时间: 2015-9-27 15:02
2012mshs 发表于 2015-9-27 14:02
It seems for grub4dos (map, cdload). Or can you capture a picture?

非常感谢回复，u盘现在不在我手中，明天我上传图片，谢谢
作者: tdqk003    时间: 2015-9-27 15:24
2012mshs 发表于 2015-9-27 14:02
It seems for grub4dos (map, cdload). Or can you capture a picture?

This is my flash drive is being tested as shown:
Fbinst menu，Grldr  menu，Burg menu：

3.jpg (100.9 KB, 下载次数: 76)

3.jpg

4.jpg (130.2 KB, 下载次数: 79)

4.jpg

5.jpg (86.26 KB, 下载次数: 82)

5.jpg
作者: tdqk003    时间: 2015-9-27 15:26
Burg menu how to write
作者: 2012mshs    时间: 2015-9-27 15:35
本帖最后由 2012mshs 于 2015-9-27 15:42 编辑
tdqk003 发表于 2015-9-27 15:26
Burg menu how to write


It shoould be

  2. title True Image 2016 (RUN by sratlf)
  3. COMMAND RUN --MEM /IMGS/ATI16.ISO

  5. title True Image 2016
  6. map /IMGS/ati16.iso (0xff) || map --mem /IMGS/ati16.iso (0xff)
  7. map --hook
  8. chainloader (0xff)
复制代码

Map iso to memory will faster than only Map ISO. But what is Burgrld?
作者: tdqk003    时间: 2015-9-27 15:43
2012mshs 发表于 2015-9-27 15:35
It shoould be

Map iso to memory will faster than only Map ISO. But what is Burgrld?

Thank you very much, I tested to see
作者: tdqk003    时间: 2015-9-27 16:11
2012mshs 发表于 2015-9-27 15:35
It shoould be

Map iso to memory will faster than only Map ISO. But what is Burgrld?

what is Burgrld?
I think GRLDR is GRUB4DOS, BURG As may be based GRUB2 development, you can look https://help.ubuntu.com/community/Burg/zh_CN
https://linuxtoy.org/archives/gr ... h-burg-support.html
Thank you again for your help, my English is very bad, but I feel burg boot quickly, so please burg menu Research
作者: tdqk003    时间: 2015-9-27 16:14
tdqk003 发表于 2015-9-27 15:43
Thank you very much, I tested to see

http://www.webupd8.org/2010/10/i ... burg-in-ubuntu.html
作者: 2012mshs    时间: 2015-9-27 16:38
tdqk003 发表于 2015-9-27 16:11
what is Burgrld?
I think GRLDR is GRUB4DOS, BURG As may be based GRUB2 development, you can look ...

If BURG seems GRUB2, you can use code for Grub2.
作者: 2012mshs    时间: 2015-9-27 17:48
tdqk003 发表于 2015-9-27 15:43
Thank you very much, I tested to see

You can try with this

  2. menuentry "Acronis True Image Home 2016 ISO" {
  3. search -s -f /iso/ati16.iso
  4. map --mem (hd0,1)/iso/ati16.iso (cd96)
  5. cdload --image=0 (map224)
  6. boot
  7. }
复制代码
作者: tdqk003    时间: 2015-9-27 18:29
2012mshs 发表于 2015-9-27 17:48
You can try with this

sorry

33.jpg (251.37 KB, 下载次数: 72)

33.jpg
作者: tdqk003    时间: 2015-9-27 18:31
2012mshs 发表于 2015-9-27 17:48
You can try with this

http://bbs.wuyou.net/forum.php?m ... mp;highlight=kernel
作者: 2012mshs    时间: 2015-9-27 18:37
tdqk003 发表于 2015-9-27 18:29
sorry

I was test with this code

  2. menuentry "Acronis True Image Home 2016 ISO" {
  3. search -s -f /iso/ati16.iso
  4. map --mem (hd0,1)/iso/ati16.iso (cd96)
  5. cdload --image=0 (map224)
  6. boot
  7. }
复制代码

It works ok. But my USB only one partition (FAT32, Active, no hide)
作者: tdqk003    时间: 2015-9-27 19:15
2012mshs 发表于 2015-9-27 18:37
I was test with this code

It works ok. But my USB only one partition (FAT32, Active, no hide)

Good I try a single partition, but you can not be UD
作者: tdqk003    时间: 2015-9-27 19:29
2012mshs 发表于 2015-9-27 18:37
I was test with this code

It works ok. But my USB only one partition (FAT32, Active, no hide)

“starting acronis loader........”

Entrance
作者: 2012mshs    时间: 2015-9-27 19:46
tdqk003 发表于 2015-9-27 19:29
“starting acronis loader........”

Entrance

Use map --mem will faster. :)
I only use USB with one partition. :)
作者: tdqk003    时间: 2015-9-28 14:54
2012mshs 发表于 2015-9-27 19:46
Use map --mem will faster. :)
I only use USB with one partition. :)

Hello I ask what the master boot mode you are using, GRUB4DOS it? Or use something else
作者: 2012mshs    时间: 2015-9-28 16:50
本帖最后由 2012mshs 于 2015-9-28 17:15 编辑
tdqk003 发表于 2015-9-28 14:54
Hello I ask what the master boot mode you are using, GRUB4DOS it? Or use something else


I use 2 USB drive for work.
- 1st: Syslinux 6.03 (some main board will hang with grub4dos)
- 2st: Grub4dos on MBR, NT6X on PBR
Also I can boot around (syslinux - grub2 - grub4dos -......)
For uefi: use grub2 with refind
But only one partition for usb.
P/s: For burg.cfg, you can try in command mode. Press "root", see partition has ATI16CN.iso and try with
map --set (hd0,1)/iso/ati16.iso (cd96)
(hd0,1) - first partition on usb. With your ud, it will (hd0,2), (hd0,3)... (partition has ati16cn.iso)
作者: 2012mshs    时间: 2015-9-29 20:53
Update: TIB shell - open TIB file in wimdows explorer
作者: shuren    时间: 2015-9-29 23:02
TIB shell: Open TIB file in windows explorer (require VC2005)

It may program by WTL, then it not need VC2005.
http://sourceforge.net/projects/wtl/files/?source=navbar
作者: 2012mshs    时间: 2015-9-29 23:27
shuren 发表于 2015-9-29 23:02
TIB shell: Open TIB file in windows explorer (require VC2005)

It may program by WTL, then it not  ...

VC2005 require for PE (Spadek)
作者: guock0    时间: 2015-9-30 20:52
2015全国各地楼凤良家兼职信息

覆盖全国所有城市所有良家,兼职,.......，无论你走到哪儿都能如 愿以偿。
  ●多达十万条信息应有尽有。各种类型满足你的不同需求
  ●QQ，电话，详细地址，三重保障，无一漏网
  ●良家，兼职，学妹，.......，满足你的不同欲望

全国良家学妹.......富婆信息good898.com 全国兼职良家学妹.......富婆信息网 美眉QQ：1431827808微信号：hsx3000














==全国兼职·良家·学妹·.......·情人·富婆性信大全==   
覆盖全国所有城市所有良家,兼职,.......，无论你走到哪儿都能如 愿以偿。
  ●多达10万条信息应有尽有。各种类型满足你的不同需求
  ●QQ，电话，详细地址，三重保障，无一漏网
  ●良家，兼职，学妹，.......，满足你的不同欲望
全国良家学妹.......富婆信息 good898.com 全国兼职良家学妹.......富婆信息网 美眉QQ：1431827808   微信号：hsx3000 体验网址http://www.good898.com
作者: yjcqm    时间: 2015-10-1 00:19
更新真快，感谢分享！
作者: tdqk003    时间: 2015-10-1 15:53
2012mshs 发表于 2015-9-28 16:50
I use 2 USB drive for work.
- 1st: Syslinux 6.03 (some main board will hang with grub4dos)
- 2 ...

Hello Great God, I changed the USB GRUB4DOS, SYSLINUX, GRUB2 synthetic disc, fat32 single partition, several temporary test normal, thank you very much God's help.
Ning outside, I would like to ask the great God, if you encounter soft RAID DELL workstations, such as s100.s110 other soft RAID, Acronis True Image 2016 is no way to see the disk array group, only to see a single hard disk, ask big God, not need to use with Acronis True Image 2016 plug-PE to backup and recovery, or if you need anything else, and I hope the master help me, thank you very much
作者: 2012mshs    时间: 2015-10-1 17:32
You should try with Acronis backup and recover 11.5.  
作者: 2012mshs    时间: 2015-10-1 17:37
If it do not see raid disk, you can try with winpe version. Other way, try test R-Drive Image bbs.wuyou.net/forum.php?mod=viewthread&tid=371666&extra=page%3D1&mobile=2
作者: 2012hzy6420    时间: 2015-10-11 14:02
谢谢分享
作者: byh9098    时间: 2015-11-23 07:51
Acronis True Image 2016BootableMedia ISO



欢迎光临 无忧启动论坛 (http://bbs.wuyou.net/) Powered by Discuz! X3.3