【XORBOOT Uefi: 多系统引导程序】-（2019-04-04 v0.25）

leoxxx

功能很强大啊。

zhangzan30

好东西 支持一下

紫微垣

用来启动win10+deepin相当好用。

cycyc

作者的BOOTICE用了很久，给力。
再试试这个！

Orochi77

Pauly,
Thank you very much for your amazing program.
I was wondering if you know how to boot parted magic from iso with xorboot uefi.
The boot process starts, however at some point parted magic cannot find PMAGIC_2019_01_03.SQFS
Few other isos like booit for uefi and image for uefi, also have problems finding files after booting the iso.

非常感谢您的精彩节目。
我想知道你是否知道如何使用xorboot uefi从iso启动parted magic。
启动过程开始，但是在某些时候，魔法师无法找到PMAGIC_2019_01_03.SQFS
很少有其他isos像uofi的booit和uefi的图像，在启动iso后也找不到文件。

Pauly

Orochi77 发表于 2019-3-24 10:12
Pauly,
Thank you very much for your amazing program.
I was wondering if you know how to boot parte ...

Please try the new version.

android

感谢大神的作品，更新一下

zgzxp

新版终于出来了，谢谢分享，bios版的更新吗？

Pauly

zgzxp 发表于 2019-3-31 19:50
新版终于出来了，谢谢分享，bios版的更新吗？

BIOS版本暂不更新

adef

XorBootUx64_0.25的菜单文件貌似和xorboot.efi一起放\efi\boot目录下找不到xorboot.xor了，xorboot.xor必须放\efi\xorboot目录下。

lminnie

好东西，正想做个多系统安装的东东

Orochi77

Pauly,

Thank you for the new version.
I did find few bugs while testing it.
1.When selecting System Type =>Linux Iso, no iso can be selected, Only xor files.
If we manually set the path to /iso/ifl.iso, the file is not found during boot.
None of my iso files boot.
2. I am not sure if this was done on purpose, but the extra parameters section has been switched between system type -> iso file and system type -> linux iso. System type iso file now has initrd and cmd as extra parameters, and system type-> linux iso has not extra parameters at all.
3. When booting linux iso files and specifying initrd file, I get "checkKernelsetup Failed: 3" error.
I hope you can fix those issues.

Thanks

=======

保利，

谢谢你的新版本。
测试时我确实发现了一些bug。
1.选择System Type => Linux Iso时，不能选择iso，只能选择xor文件。
如果我们手动将路径设置为/iso/ifl.iso，则在引导期间找不到该文件。
我的iso文件都没有启动。
2.我不确定这是否是故意的，但额外的参数部分已在系统类型 - > iso文件和系统类型 - > linux iso之间切换。系统类型iso文件现在有initrd和cmd作为额外参数，而system type-> linux iso根本没有额外的参数。
3.在启动linux iso文件并指定initrd文件时，出现“checkKernelsetup Failed：3”错误。
我希望你能解决这些问题。

谢谢

Pauly

Orochi77 发表于 2019-4-1 22:08
Pauly,

Thank you for the new version.

Sorry, in the new version, the system types are different from old ones, you should modify the menu manually.

Orochi77

Pauly,

I tried booting a simple linux iso from ntfs partition, I get /iso/ifl.iso not found!
In the 0.24 version, the same iso booted fine.
Right now I cannot boot anything except efi files.
Maybe someone can confirm this.

======

保利，

我尝试从ntfs分区启动一个简单的linux iso，我找不到/iso/ifl.iso！
在0.24版本中，相同的iso启动很好。
现在除了efi文件我无法启动任何东西。
也许有人可以证实这一点。

Pauly

Orochi77 发表于 2019-4-2 00:34
Pauly,

I tried booting a simple linux iso from ntfs partition, I get /iso/ifl.iso not found!

Maybe you should re-make the boot menu file.

brook

辛苦Pauly，感谢您的分享，希望闲暇时把bootice也更新一下！谢谢了

hilsonma

新版本强大了许多：
有些efi程序原本不能启动的现在能启动了。如：grubfm.efi, minilinux.efi，refind.efi
逻辑分区的wim文件原本不能启动的现在能启动了。

有个小问题：原本菜单文件可以放 \efi\boot\ 跟xorboot.efi 一起的，现在只能放 \efi\xorboot\ 了。

假大空

P大终于再次更新了，支持！

Orochi77

Pauly,

Maybe you should re-make the boot menu file.

I used a new usb with one fat partition and a new boot menu file, and attempted to boot iso files.
I can't boot a single iso file.
In your tests with the new version, did you try booting any uefi supported iso files?

====
我使用了一个带有一个胖分区和一个新的启动菜单文件的新usb，并尝试启动iso文件。
我无法启动单个iso文件。
在使用新版本的测试中，您是否尝试启动任何支持uefi的iso文件？

hilsonma

Orochi77 发表于 2019-4-2 23:04
Pauly,

I used a new usb with one fat partition and a new boot menu file, and attempted to boot is ...

I boot iso files sucessfully with the new version.

Pauly

Orochi77 发表于 2019-4-2 23:04
Pauly,

I used a new usb with one fat partition and a new boot menu file, and attempted to boot is ...

Did you export the new bootx64.efi？Could you uplosd a screenshot of the failing boot？

hhh333

Pauly 发表于 2019-4-1 22:38
Sorry, in the new version, the system types are different from old ones, you should modify the m ...

老的菜单好像可以读啊，再另存为行不行？

hhh333

好你有问题，不能显示菜单出来

hhh333

有问题，不能显示菜单出来
虚拟机光盘启动，用新版本做的，用老版本启动也可出菜单，如下：


但用新版来启动就是这个样子：


xorboot.7z (5.63 KB, 下载次数: 6)

2019-4-3 10:32 上传

点击文件名下载附件
下载积分: 无忧币 -2

Orochi77

Hilsonma,

I boot iso files sucessfully with the new version.

Thank you for your reply. I am not sure what's going on then on my side.

Pauli,

Did you export the new bootx64.efi?

Of course.

Could you upload a screenshot of the failing boot?

Of course. Here they are.

The 1st screenshot shows, that an iso files cannot be selected. The only option for selection is xorboot.xor menu.
The previous version did not have that. I am not sure if it is a bug or it is supposed to be like that.

====

Hilsonma，
“我使用新版本成功启动iso文件。”
谢谢您的回复。我不确定那时我发生了什么。

保利，
“你导出了新的bootx64.efi吗？”
当然。

“你能上传失败启动的屏幕截图吗？”
当然。他们来了。

第1个屏幕截图显示，无法选择iso文件。选择的唯一选项是xorboot.xor菜单。
以前的版本没有。我不确定它是否是一个bug或它应该是那样的。

Orochi77

hilsonma,

Could you kindly upload your xorboot.xor menu, so I can take a look at how you configured iso files in the menu.
Thanks.

====
你能不能上传你的xorboot.xor菜单，所以我可以看看你如何在菜单中配置iso文件。
谢谢。

hilsonma

Orochi77 发表于 2019-4-4 02:57
hilsonma,

Could you kindly upload your xorboot.xor menu, so I can take a look at how you configur ...

Orochi77,

I think you should have edited your xorboot.xor with the old version. Because I did the same thing just now. And result as below:


After that I generated a new xorboot.xor with the new version and covered the old xorboot.xor menu, I suceeded to boot iso files again.

Orochi77

hilsonma,

Sorry that I have the same problem as yours now. I tried the new version with a usb disk and suceeded. But when I upgraded my old version in hard disk to the new version, I failed to boot iso files.

Thank God. I thought I was the only one having this problem. I was loosing my mind.
I hope Pauly can fix this.

=====

“对不起，我现在和你的问题一样。我用usb磁盘尝试了新版本并且超过了。但是当我将旧版本的硬盘升级到新版本时，我无法启动iso文件。”

感谢上帝。我以为我是唯一一个遇到这个问题的人。我在失去理智。
我希望保利可以解决这个问题。

hilsonma

Orochi77 发表于 2019-4-4 07:16
hilsonma,

Orochi77,

I have solved my problem. I re-generated a new xorboot.xor with the new version xorbootux64.exe and everything is ok.

Your screenshots show that you edited xorboot.xor with the old version xorbootux64.exe .
"No extra parameters needed." is for system type "ISO File".
"Linux ISO" should have extra params.
The result in your screenshots should be cause by editing xorboot.xor with old version and using it with the new version.

Pauly

Orochi77 发表于 2019-4-4 07:16
hilsonma,

I'm very sorry, in the English UI of the new version, the system types are incorrect. They are only correct in  the "Chinese Simplified" language UI, I'll correct it on this weekend. You have to modify you menu file in the "Chinese Simplified" UI temporarily.