[终结]人人学会！DIY定制Win10_1809(含成品!)2020.4.26修订

Ace.Lee · 发表于 2019-3-30 23:12:02

令狐大虾发表于 2019-3-30 22:07
审核模式下DISM++清理后，重新封装。PE下打包DISM命令或是DISM++或是Gimagex都行。
如果对于PE镜像，必 ...

ctrl+shift+f3进入系统后调整了一些设置。然后gimagex捕获镜像，用这个捕获出来的镜像安装系统，有些设置还是原来默认的，并不是我调整好的。唉，走一遍流程时间不少，都不想折腾了。

898756744 · 发表于 2019-3-31 14:02:28

又更新了，谢谢大侠！

wrs · 发表于 2019-3-31 17:41:04

能否给个福利看看效果

cakiihana · 发表于 2019-3-31 18:02:52

附件下载一下~

cakiihana · 发表于 2019-3-31 18:05:15

附件呢附件呢附件呢附件呢附件呢附件呢附件呢附件呢

hnwsdz · 发表于 2019-3-31 19:35:55

这个要收藏

2012bzzb · 发表于 2019-3-31 22:09:03

求个附件谢谢

303055 · 发表于 2019-3-31 22:21:48

又更新了,强大，期待福利！

2012bzzb · 发表于 2019-3-31 22:30:02

2012bzzb 发表于 2019-3-31 22:09
求个附件谢谢

如何在映像里添加显卡驱动和程序？

2011wr · 发表于 2019-4-5 17:04:05

楼主好人，俺来领取福利啦。

ttt0001 · 发表于 2019-4-5 21:11:24

真的很好，感谢楼主分享，学习一下，谢谢！

onlive · 发表于 2019-4-12 10:14:34

楼主好人，来领取福利啦

2012liwanxi · 发表于 2019-4-12 10:48:16

感谢楼主分享！

intellect · 发表于 2019-4-14 18:46:39

再来支持楼主，感谢分享好教程

Ace.Lee · 发表于 2019-4-14 23:46:15

请问能不能帮我看下隐私的“位置”开关和活动历史记录的“在此设备上存储我的活动历史记录”这两个开关注册表项，实在没找到。

叶知秋 · 发表于 2019-4-15 07:37:35

楼主大侠又出新版了，又来申请领取福利一份。

叶知秋 · 发表于 2019-4-15 09:21:13

谢谢楼主，福利已收到！

令狐大虾 · 发表于 2019-4-15 10:54:10

Ace.Lee 发表于 2019-4-14 23:46
请问能不能帮我看下隐私的“位置”开关和活动历史记录的“在此设备上存储我的活动历史记录”这两个开关注册 ...

叶知秋 · 发表于 2019-4-17 15:16:13

2019-04-17 15:16:05, Info                DISM PID=2988 TID=6992 Scratch directory set to 'Z:\'. - CDISMManager::put_ScratchDir
2019-04-17 15:16:05, Info                DISM PID=2988 TID=6992 DismCore.dll version: 10.0.14393.2457 - CDISMManager::FinalConstruct
2019-04-17 15:16:05, Info                DISM Try to initialize Panther logging 1 times, last error: 0x0
2019-04-17 15:16:05, Info                DISM PID=2988 TID=6992 Successfully loaded the ImageSession at "C:\Windows\System32\Dism" - CDISMManager::LoadLocalImageSession
2019-04-17 15:16:05, Info                DISM Try to initialize Panther logging 1 times, last error: 0x0
2019-04-17 15:16:05, Info                DISM DISM Provider Store: PID=2988 TID=6992 Found and Initialized the DISM Logger. - CDISMProviderStore::Internal_InitializeLogger
2019-04-17 15:16:05, Info                DISM DISM Provider Store: PID=2988 TID=6992 Failed to get and initialize the PE Provider.  Continuing by assuming that it is not a WinPE image. - CDISMProviderStore::Final_OnConnect
2019-04-17 15:16:05, Info                DISM DISM Provider Store: PID=2988 TID=6992 Finished initializing the Provider Map. - CDISMProviderStore::Final_OnConnect
2019-04-17 15:16:05, Info                DISM DISM Provider Store: PID=2988 TID=6992 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2019-04-17 15:16:05, Info                DISM DISM Provider Store: PID=2988 TID=6992 Provider has previously been initialized.  Returning the existing instance. - CDISMProviderStore::Internal_GetProvider
2019-04-17 15:16:05, Info                DISM Try to initialize Panther logging 1 times, last error: 0x0
2019-04-17 15:16:05, Info                DISM DISM Provider Store: PID=2988 TID=6992 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2019-04-17 15:16:05, Info                DISM DISM Provider Store: PID=2988 TID=6992 Provider has previously been initialized.  Returning the existing instance. - CDISMProviderStore::Internal_GetProvider
2019-04-17 15:16:05, Info                DISM DISM Manager: PID=2988 TID=6992 Successfully created the local image session and provider store. - CDISMManager::CreateLocalImageSession
2019-04-17 15:16:05, Info                DISM DISM Provider Store: PID=2988 TID=6992 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2019-04-17 15:16:05, Info                DISM DISM Provider Store: PID=2988 TID=6992 Provider has previously been initialized.  Returning the existing instance. - CDISMProviderStore::Internal_GetProvider
2019-04-17 15:16:05, Info                DISM DISM.EXE:
2019-04-17 15:16:05, Info                DISM DISM.EXE: <----- Starting Dism.exe session ----->
2019-04-17 15:16:05, Info                DISM DISM.EXE:
2019-04-17 15:16:05, Info                DISM DISM.EXE: Host machine information: OS Version=10.0.14393, Running architecture=amd64, Number of processors=8
2019-04-17 15:16:05, Info                DISM DISM.EXE: Dism.exe version: 10.0.14393.0
2019-04-17 15:16:05, Info                DISM DISM.EXE: Executing command line: dism  /export-image /Compress:maximum /sourceimagefile:WimFiles\x64\install.wim /sourceindex:2 /destinationimagefile:1809x64.wim
2019-04-17 15:16:05, Info                DISM DISM Provider Store: PID=2988 TID=6992 Getting the collection of providers from a local provider store type. - CDISMProviderStore::GetProviderCollection
2019-04-17 15:16:05, Info                DISM DISM Provider Store: PID=2988 TID=6992 Provider has not previously been encountered.  Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
2019-04-17 15:16:05, Info                DISM DISM Provider Store: PID=2988 TID=6992 Loading Provider from location C:\Windows\System32\Dism\FolderProvider.dll - CDISMProviderStore::Internal_GetProvider
2019-04-17 15:16:05, Info                DISM DISM Provider Store: PID=2988 TID=6992 Connecting to the provider located at C:\Windows\System32\Dism\FolderProvider.dll. - CDISMProviderStore::Internal_LoadProvider
2019-04-17 15:16:05, Info                DISM DISM Provider Store: PID=2988 TID=6992 Provider has not previously been encountered.  Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
2019-04-17 15:16:05, Info                DISM DISM Provider Store: PID=2988 TID=6992 Loading Provider from location C:\Windows\System32\Dism\WimProvider.dll - CDISMProviderStore::Internal_GetProvider
2019-04-17 15:16:05, Info                DISM DISM Provider Store: PID=2988 TID=6992 Connecting to the provider located at C:\Windows\System32\Dism\WimProvider.dll. - CDISMProviderStore::Internal_LoadProvider
2019-04-17 15:16:05, Info                DISM DISM Provider Store: PID=2988 TID=6992 Provider has not previously been encountered.  Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
2019-04-17 15:16:05, Info                DISM DISM Provider Store: PID=2988 TID=6992 Loading Provider from location C:\Windows\System32\Dism\VHDProvider.dll - CDISMProviderStore::Internal_GetProvider
2019-04-17 15:16:05, Info                DISM DISM Provider Store: PID=2988 TID=6992 Connecting to the provider located at C:\Windows\System32\Dism\VHDProvider.dll. - CDISMProviderStore::Internal_LoadProvider
2019-04-17 15:16:05, Info                DISM DISM Provider Store: PID=2988 TID=6992 Provider has not previously been encountered.  Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
2019-04-17 15:16:05, Info                DISM DISM Provider Store: PID=2988 TID=6992 Loading Provider from location C:\Windows\System32\Dism\ImagingProvider.dll - CDISMProviderStore::Internal_GetProvider
2019-04-17 15:16:05, Info                DISM DISM Provider Store: PID=2988 TID=6992 Connecting to the provider located at C:\Windows\System32\Dism\ImagingProvider.dll. - CDISMProviderStore::Internal_LoadProvider
2019-04-17 15:16:05, Info                DISM DISM Provider Store: PID=2988 TID=6992 Provider has not previously been encountered.  Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
2019-04-17 15:16:05, Info                DISM DISM Provider Store: PID=2988 TID=6992 Loading Provider from location C:\Windows\System32\Dism\CompatProvider.dll - CDISMProviderStore::Internal_GetProvider
2019-04-17 15:16:05, Info                DISM DISM Provider Store: PID=2988 TID=6992 Connecting to the provider located at C:\Windows\System32\Dism\CompatProvider.dll. - CDISMProviderStore::Internal_LoadProvider
2019-04-17 15:16:05, Info                DISM DISM Provider Store: PID=2988 TID=6992 Provider has not previously been encountered.  Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
2019-04-17 15:16:05, Info                DISM DISM Provider Store: PID=2988 TID=6992 Loading Provider from location C:\Windows\System32\Dism\FfuProvider.dll - CDISMProviderStore::Internal_GetProvider
2019-04-17 15:16:05, Info                DISM DISM Provider Store: PID=2988 TID=6992 Connecting to the provider located at C:\Windows\System32\Dism\FfuProvider.dll. - CDISMProviderStore::Internal_LoadProvider
2019-04-17 15:16:05, Info                DISM DISM Provider Store: PID=2988 TID=6992 Provider has not previously been encountered.  Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
2019-04-17 15:16:05, Info                DISM DISM Provider Store: PID=2988 TID=6992 Loading Provider from location C:\Windows\System32\Dism\SiloedPackageProvider.dll - CDISMProviderStore::Internal_GetProvider
2019-04-17 15:16:05, Warning             DISM DISM Provider Store: PID=2988 TID=6992 Failed to Load the provider: C:\Windows\System32\Dism\SiloedPackageProvider.dll. - CDISMProviderStore::Internal_GetProvider(hr:0x8007007e)
2019-04-17 15:16:05, Info                DISM DISM.EXE: Got the collection of providers. Now enumerating them to build the command table.
2019-04-17 15:16:05, Info                DISM DISM.EXE: Attempting to add the commands from provider: DISM Log Provider
2019-04-17 15:16:05, Info                DISM DISM.EXE: Attempting to add the commands from provider: FolderManager
2019-04-17 15:16:05, Info                DISM DISM.EXE: Attempting to add the commands from provider: WimManager
2019-04-17 15:16:05, Info                DISM DISM.EXE: Succesfully registered commands for the provider: WimManager.
2019-04-17 15:16:05, Info                DISM DISM.EXE: Attempting to add the commands from provider: VHDManager
2019-04-17 15:16:05, Info                DISM DISM.EXE: Attempting to add the commands from provider: GenericImagingManager
2019-04-17 15:16:05, Info                DISM DISM.EXE: Succesfully registered commands for the provider: GenericImagingManager.
2019-04-17 15:16:05, Info                DISM DISM.EXE: Attempting to add the commands from provider: Compatibility Manager
2019-04-17 15:16:05, Info                DISM DISM.EXE: Succesfully registered commands for the provider: Compatibility Manager.
2019-04-17 15:16:05, Info                DISM DISM.EXE: Attempting to add the commands from provider: FfuManager
2019-04-17 15:16:05, Info                DISM DISM Provider Store: PID=2988 TID=6992 Getting Provider WimManager - CDISMProviderStore::GetProvider
2019-04-17 15:16:05, Info                DISM DISM Provider Store: PID=2988 TID=6992 Provider has previously been initialized.  Returning the existing instance. - CDISMProviderStore::Internal_GetProvider
[2988] [0x80070057] WIMLoadImageInternal:(166): 参数错误。
2019-04-17 15:16:05, Error                DISM DISM WIM Provider: PID=2988 TID=6992 onecore\base\ntsetup\opktools\dism\providers\wimprovider\dll\wimmanager.cpp:1480 - CWimManager::Export(hr:0x80070057)
2019-04-17 15:16:05, Error                DISM DISM WIM Provider: PID=2988 TID=6992 onecore\base\ntsetup\opktools\dism\providers\wimprovider\dll\wimmanager.cpp:4821 - CWimManager::InternalCmdExport(hr:0x80070057)
2019-04-17 15:16:05, Error                DISM DISM WIM Provider: PID=2988 TID=6992 "Error executing command" - CWimManager::InternalExecuteCmd(hr:0x80070057)
2019-04-17 15:16:05, Error                DISM DISM WIM Provider: PID=2988 TID=6992 onecore\base\ntsetup\opktools\dism\providers\wimprovider\dll\wimmanager.cpp:2223 - CWimManager::ExecuteCmdLine(hr:0x80070057)
2019-04-17 15:16:05, Error                DISM DISM.EXE: WimManager processed the command line but failed. HRESULT=80070057
2019-04-17 15:16:05, Info                DISM DISM.EXE: Image session has been closed. Reboot required=no.
2019-04-17 15:16:05, Info                DISM DISM.EXE:
2019-04-17 15:16:05, Info                DISM DISM.EXE: <----- Ending Dism.exe session ----->
2019-04-17 15:16:05, Info                DISM DISM.EXE:
2019-04-17 15:16:05, Info                DISM DISM Provider Store: PID=2988 TID=6992 Found the OSServices.  Waiting to finalize it until all other providers are unloaded. - CDISMProviderStore::Final_OnDisconnect
2019-04-17 15:16:05, Info                DISM DISM Provider Store: PID=2988 TID=6992 Disconnecting Provider: FolderManager - CDISMProviderStore::Internal_DisconnectProvider
2019-04-17 15:16:05, Info                DISM DISM Provider Store: PID=2988 TID=6992 Disconnecting Provider: WimManager - CDISMProviderStore::Internal_DisconnectProvider
2019-04-17 15:16:05, Info                DISM DISM Provider Store: PID=2988 TID=6992 Disconnecting Provider: VHDManager - CDISMProviderStore::Internal_DisconnectProvider
2019-04-17 15:16:05, Info                DISM DISM Provider Store: PID=2988 TID=6992 Disconnecting Provider: GenericImagingManager - CDISMProviderStore::Internal_DisconnectProvider
2019-04-17 15:16:05, Info                DISM DISM Provider Store: PID=2988 TID=6992 Disconnecting Provider: Compatibility Manager - CDISMProviderStore::Internal_DisconnectProvider
2019-04-17 15:16:05, Info                DISM DISM Provider Store: PID=2988 TID=6992 Disconnecting Provider: FfuManager - CDISMProviderStore::Internal_DisconnectProvider
2019-04-17 15:16:05, Info                DISM DISM Provider Store: PID=2988 TID=6992 Releasing the local reference to DISMLogger.  Stop logging. - CDISMProviderStore::Internal_DisconnectProvider

大侠，运行第一步就出现了错误87，出错日志如上。工具版本是1809 系统镜像是Ltsc20419，工作系统是ltsb2016

令狐大虾 · 发表于 2019-4-17 16:43:32

本帖最后由令狐大虾于 2019-4-17 16:56 编辑

叶知秋发表于 2019-4-17 15:16
2019-04-17 15:16:05, Info DISM PID=2988 TID=6992 Scratch directory set to 'Z:\'. ...

这个教程指明是处理1809企业版，和ltsc有区别的。1809企业版是多合一映像，而ltsc是单个映像。如下图提取所示:

Sys32 · 发表于 2019-4-18 08:12:13

大虾，没有附件吗?可以发一份文中的工具吗？

eastmz · 发表于 2019-4-18 08:14:31

非常棒啊，感谢

叶知秋 · 发表于 2019-4-18 09:00:26

大侠，你的意思是，将那个地方改为1重新命名存一个新的批处理就可以了吧，好的，今天就试试，多谢回复。

令狐大虾 · 发表于 2019-4-18 09:39:09

叶知秋发表于 2019-4-18 09:00
大侠，你的意思是，将那个地方改为1重新命名存一个新的批处理就可以了吧，好的，今天就试试，多谢回复。

我只是解释一下1809企业版和LTSC存在区别包括异同。教程中64W10_1809_1.4RemoveApps.txt相对应的组件可以调整。但不能直接套用于LTSC。为了系统的兼容性，最好仅仅处理1809
;12、连接
;14、Window浏览器
;(2)、Edge
;16、小娜
;25、混合现实门户
;40、OneDrive
;61、Windows Defender组件
即可！

叶知秋 · 发表于 2019-4-19 13:57:15

好的，多谢大侠回复，我直接用1809来做吧

brook · 发表于 2019-4-20 13:46:42

厉害了，楼主

bg888 · 发表于 2019-4-21 10:06:35

学习到了。哈哈
难怪俺做的老是弹“主页已更改、、、、”
下次更新试一下

2012liujingxion · 发表于 2019-4-28 09:18:28

非常感谢楼主的分享，请发福利。

86024363 · 发表于 2019-5-21 09:33:47

正想整个合适的1903自用，楼主的教程真是太给力了！先点赞后i收藏。谢谢！

令狐大虾 · 发表于 2019-5-21 12:48:39

86024363 发表于 2019-5-21 09:33
正想整个合适的1903自用，楼主的教程真是太给力了！先点赞后i收藏。谢谢！

1903和这个有差别的，并且还不是正式版！尝鲜只是适合家用机玩玩而已

		自动登录	找回密码
密码			注册

[教程] [终结]人人学会！DIY定制Win10_1809(含成品!)2020.4.26修订

点评

点评

点评

点评

点评

点评

点评

点评

点评

点评

点评

点评

点评

点评

点评

点评

点评

点评

点评

点评

点评

点评