|
|
增加SATA/SCSI/RAID驱动问题
因为要在HP服务器上使用克隆安装，用V27版光盘启动找不到相应驱动，看不到硬盘，自己找到驱动想安装上去，已经按照DIY.TXT里面的外挂驱动的说明操作，包括修改INF文件名为0LIS_SAS.INF,但是启动后系统提示加载失败，让我和供应商联系。
我想问的是INF文件的内容需要修改吗，下面粘贴的就是INF文件全文，请帮助看一下。
另外，能不能给一个增加新的SATA/SCSI等新的驱动的详细的方法。
谢谢。
; LSI_SAS.INF - version (Windows XP)
;
; This is the INF file for Windows XP for the LSI_SAS based
; PCI MPT environment (Serial Attached SCSI devices)
;
; ********************************************************************
; *
; Copyright 2005 LSI Logic, Inc. All rights reserved. *
; *
; This file is property of LSI Logic, Inc. and is licensed for *
; use as is. The receipt of or possession of this file does not *
; convey any rights to modify its contents, in whole, or in part, *
; without the specific written consent of LSI Logic, Inc. *
; *
; ********************************************************************
[version]
signature="$Windows NT$"
Class=SCSIAdapter
ClassGUID={4D36E97B-E325-11CE-BFC1-08002BE10318}
Provider=%LSI%
DriverVer=08/16/2005,1.21.03.00
CatalogFile.ntx86=lsi2k2k3.cat
[DestinationDirs]
DefaultDestDir = 12 ; DIRID_DRIVERS
[SourceDisksFiles.x86]
lsi_sas.sys = 1
[SourceDisksNames]
1 = %DiskDesc%,,
[Manufacturer]
%LSI%=LSI
[LSI]
%DevDesc8% = LSI_SAS_Inst, PCI\VEN_1000&DEV_0050
%DevDesc9% = LSI_SAS_Inst, PCI\VEN_1000&DEV_0054
%DevDesc10% = LSI_SAS_Inst, PCI\VEN_1000&DEV_0058
%DevDesc11% = LSI_SAS_Inst, PCI\VEN_1000&DEV_005E
%DevDesc12% = LSI_SAS_Inst, PCI\VEN_1000&DEV_0056
%DevDesc13% = LSI_SAS_Inst, PCI\VEN_1000&DEV_005A
[ControlFlags]
ExcludeFromSelect = PCI\VEN_1000&DEV_0050
ExcludeFromSelect = PCI\VEN_1000&DEV_0054
ExcludeFromSelect = PCI\VEN_1000&DEV_0058
ExcludeFromSelect = PCI\VEN_1000&DEV_005E
ExcludeFromSelect = PCI\VEN_1000&DEV_0056
ExcludeFromSelect = PCI\VEN_1000&DEV_005A
[LSI_SAS_Inst]
CopyFiles = LSI_SAS_CopyFiles
AddReg = LSI_SAS_AddReg
[LSI_SAS_Inst.HW]
DelReg = LegacyScsiportValues
[LSI_SAS_Inst.Services]
AddService = LSI_SAS, %SPSVCINST_ASSOCSERVICE%, LSI_SAS_Service_Inst, Miniport_EventLog_Inst
[LSI_SAS_Service_Inst]
ServiceType = %SERVICE_KERNEL_DRIVER%
StartType = %SERVICE_BOOT_START%
ErrorControl = %SERVICE_ERROR_NORMAL%
ServiceBinary = %12%\lsi_sas.sys
LoadOrderGroup = SCSI Miniport
AddReg = pnpsafe_pci_addreg
AddReg = bus_type_sas
[LSI_SAS_CopyFiles]
lsi_sas.sys,,,1
[LSI_SAS_AddReg]
HKLM,SYSTEM\CurrentControlSet\Services\Lsi_sas\Parameters\Device,DriverParameter,0x00000002,"PlaceHolder=0;"
HKLM,SYSTEM\CurrentControlSet\Services\Lsi_sas\Parameters\Device,MaximumSGList,0x00010001,0xFF
HKLM,SYSTEM\CurrentControlSet\Services\Lsi_sas\Parameters\Device,NumberOfRequests,0x00010001,0xFF
[LegacyScsiportValues]
HKR,Scsiport,BusNumber
HKR,Scsiport,LegacyInterfaceType
HKR,Scsiport,SlotNumber
[pnpsafe_pci_addreg]
HKR, "Parameters\PnpInterface", "5", 0x00010001, 0x00000001
[bus_type_sas]
HKR, "Parameters", "BusType", 0x00010001, 0x0000000B
[Miniport_EventLog_Inst]
AddReg = Miniport_EventLog_AddReg
[Miniport_EventLog_AddReg]
HKR,,EventMessageFile,%REG_EXPAND_SZ%,"%%SystemRoot%%\System32\IoLogMsg.dll"
HKR,,TypesSupported,%REG_DWORD%,7
[Strings]
LSI = "LSI Logic"
DiskDesc = "LSI Logic PCI Fusion-MPT SAS Driver Install Disk (StorPort)"
DevDesc8 = "LSI Adapter, SAS 3000 series, 4-port with 1064 -StorPort"
DevDesc9 = "LSI Adapter, SAS 3000 series, 8-port with 1068 -StorPort"
DevDesc10 = "LSI Adapter, SAS 3000 series, 8-port with 1068E -StorPort"
DevDesc11 = "LSI Adapter, SAS 3000 series, 6-port with 1066 -StorPort"
DevDesc12 = "LSI Adapter, SAS 3000 series, 4-port with 1064E -StorPort"
DevDesc13 = "LSI Adapter, SAS 3000 series, 6-port with 1066E -StorPort"
;*******************************************
;Handy macro substitutions (non-localizable)
SPSVCINST_ASSOCSERVICE = 0x00000002
SERVICE_KERNEL_DRIVER = 1
SERVICE_BOOT_START = 0
SERVICE_ERROR_NORMAL = 1
REG_EXPAND_SZ = 0x00020000
REG_DWORD = 0x00010001 |
|
[复制链接]
IP卡
狗仔卡
发表于 2007-2-12 08:57:52
显身卡
