用WinBuilder制作一个Win8PE (X86,X64)

2012doberman

Share.
81x64_Drivers.iso

http://pan.baidu.com/s/1dDxdP2T

sp_star

2012doberman 发表于 2014-1-3 04:04
Share.
81x64_Drivers.iso

Thank you, doberman.
I have downloaded and have a quick try, it's as good as your x86 PE. (your PE are always very good :) )
I will find some time to look into your PE, and to see how to improve my script.
BTW, I think someone have a nice PE again to translate it to Chinese.
BR.

sp_star

2012doberman 发表于 2014-1-3 04:04
Share.
81x64_Drivers.iso

A few suggestion:
1. WLAN support seems not included, it should be nice for laptop.
2. Audio is not common used. (personal viewpoint) It can be an external module.
3. system32\catroot seems only from boot.wim, but it's very important for x64. For my personal experience, some internal driver (for example, wireless) cannot work without these files. Of cause you can pick up the needed files only. (It's difficult for me)

2012doberman

1.Wlan - works! Added the necessary packages!
2. Audio - can be externally. But the place is not enough!
3. Acronis (TIH 14 ADD11)- English. Work in x86, x64!

2012doberman

You can add RecEnv scissors and externally. IE - only x64. Primodisk - set once at boot as Ramdrive - "B".

Temp variables are automatically assigned:
If RAM is less than 1Gb, then X:\Temp
Ram disk created "B" ~ 3mb to mount *. Wim.
If more RAM 1Gb, then B:\Temp
Ramdrive - calculated automaton of RAM.

To Videos are installed automatically, you need to delete:
X:\Windows\Inf\basicdisplay.inf  - delete
X:\Windows\Inf\basicrender.inf  - delete

BCD - "testsigning"  yes   ---   (x64)

sp_star

2012doberman 发表于 2014-1-3 14:39
You can add RecEnv scissors and externally. IE - only x64. Primodisk - set once at boot as Ramdrive  ...

IE - only x64, should be a problem. It "flashed" when open website by typing the address. Add 32-bit IE can fix it, but add a lot of files in SysWOW64. Do you know better method?

2012doberman

I seemed to work fine IE11. I do not see any problems?
You can add an external Opera.
If you do not need to WMI, you can clean about Wbem!

If you install the video, the flash is working properly.

ADD:
1. X:\Program Files\Common Files\Microsoft Shared\VGX
2. html.iec + (mui)!

sp_star

2012doberman 发表于 2014-1-3 15:39
I seemed to work fine IE11. I do not see any problems?
You can add an external Opera.
If you do no ...

I tested your PE in VM (a slow PC?)
you can try type www.bing.com in IE address bar, and save the site in favorite. Re-open it from favorite, you should can see the problem.

2012doberman

sp_star 发表于 2014-1-3 16:50
I tested your PE in VM (a slow PC?)
you can try type www.bing.com in IE address bar, and save the ...

O! I did not know about this issue. See what I can do!
I usually use Opera.

sp_star

2012doberman 发表于 2014-1-3 18:18
O! I did not know about this issue. See what I can do!
I usually use Opera.

Add 32-bit IE can fix it, but it's too big....

kayuk

在 win7 x64 下用这个工具定制 win 8.1 x64 后VM、实体机都无法进桌面，启动到进度条那里的时候就提示启动失败，将会重启。

很奇怪，刚刚下载了另一个 由 zlgs 前辈 上传的 64位 8pe 使用也是一样的结果
http://bbs.wuyou.net/forum.php?m ... &fromuid=253371

kayuk

正常了，我把ISO放到UD引导就正常，两个都可以工作，但放在硬盘上用BCD引导的就进不了桌面，也不知道是什么原因。
难道要 ramos 模式 才可以放在硬盘上，winpe 模式 只能在外部存储器上引导？

sp_star

kayuk 发表于 2014-1-3 21:23
正常了，我把ISO放到UD引导就正常，两个都可以工作，但放在硬盘上用BCD引导的就进不了桌面，也不知道是什么 ...

没有这样的问题，可能还是你的启动设置有点不对。

kayuk

sp_star 发表于 2014-1-3 22:42
没有这样的问题，可能还是你的启动设置有点不对。

谢谢回复，我刚才在办公室急着回家图省时间所以只是单纯用EasyBCD添加ISO、WIM文件到启动条目，等会用grldr.mbr试试

2011_Pia1024

此帖真是受用, 感谢 sp_star 大的贡献

对繁体中文完全相容~

有一事想请教 目前不知道如何解决开机时的介面载入问题
像我是做RAMOS  RamOSInit.ini 这个文件是否启动系统后第一载入的呢
我启动时会先看到桌面, 然后才出现LOGO载入

        ===== RamOSInit.ini =====
     LOGO %WinDir%\web\wallpaper\Windows\img1.jpg

     TIPS  正在设定系统......,,1,#1
     EXEC !%SystemRoot%\system32\winpeshl.exe
     INIT IU,4000
     FONT %SystemRoot%\Fonts,0
     ::以下略
     
     

sp_star

2011_Pia1024 发表于 2014-1-4 20:45
此帖真是受用, 感谢 sp_star 大的贡献

对繁体中文完全相容~

RamOSInit.ini是在启动后载入，这个是在注册表里设置的。
和正常windows一样，你也可以找一个启动前就执行的位置来执行ini文件，只是要注意不要把系统挂死了。

2011_Pia1024

另外有沒有大大可以解惑一下
WinBuilder 可以註冊其他軟件的.DLL嗎? 例如7-zip
當然我不是要7Zip啦, 只是例如~^^
目前都是在PE內註冊... 這樣PE設定比較雜, 所以想都整合在WinBuilder處理
而且sp_star大的PE整合7zip, 沒有見到在PE內註冊DLL.... 小弟不才><

sp_star

2011_Pia1024 发表于 2014-1-4 21:20
另外有沒有大大可以解惑一下
WinBuilder 可以註冊其他軟件的.DLL嗎? 例如7-zip
當然我不是要7Zip啦, 只是 ...

什么叫"注册DLL"?

2012bear1alex1

2011_Pia1024 发表于 2014-1-4 21:20
另外有沒有大大可以解惑一下
WinBuilder 可以註冊其他軟件的.DLL嗎? 例如7-zip
當然我不是要7Zip啦, 只是 ...

通常dll是缺檔再補檔應該就行了吧~您的意思是不是在PE內執行某的軟件時，會出現*.dll錯誤或找不到呢??但希望sp大能整合所有用的到的dll進winbulider??

hhh333

经过仔细定位，发现64位安装输入法syswow64中需要kbdus.dll，而脚本中没有加入，导致64位输入法有时要安装2次，32位输入法安装不上，加上它问题解决。

sp_star

hhh333 发表于 2014-1-6 07:40
经过仔细定位，发现64位安装输入法syswow64中需要kbdus.dll，而脚本中没有加入，导致64位输入法有时要安装2 ...

多谢热心反馈，我会把这个文件加进去的。

2012doberman

Added IE (x86)
Added RecEnv (x64) - externally triggered.
Added some drivers in "System"  (bfadfcoei.sys, bfadi.sys etc. )
http://pan.baidu.com/s/1dDxdP2T

sp_star

Thanks for the update.
I'm curious how you keep such a small size. I plan to optimize my script, by reference to your PE, if you do not mind it.
BTW, if you agree, I will put your link on the top, so more guys can know it.

2011_Pia1024

sp_star 发表于 2014-1-4 21:18
RamOSInit.ini是在启动后载入，这个是在注册表里设置的。
和正常windows一样，你也可以找一个启动前就执 ...

感謝提醒, 我再找找看~ 感謝感謝!~

2011_Pia1024

2012bear1alex1 发表于 2014-1-4 22:13
通常dll是缺檔再補檔應該就行了吧~您的意思是不是在PE內執行某的軟件時，會出現*.dll錯誤或找不到呢??但 ...

像是7-zip 如果没有注册(登录) .DLL (regsvr32.exe /s "%ProgramFiles%\7-Zip\7-zip.dll)
就会发现右键菜单没有捷径 因为我发现蛮多软件都需要注册的, 是不是有甚麼方法我忽略掉了呢^^

2012doberman

Thanks to you!
Use InftoReg:

sp_star

2012doberman 发表于 2014-1-6 21:06
Thanks to you!
Use InftoReg:

what "InftoReg" used for? find the dependency of files?

2012bear1alex1

2011_Pia1024 发表于 2014-1-6 20:37
像是7-zip 如果没有注册(登录) .DLL (regsvr32.exe /s "%ProgramFiles%\7-Zip\7-zip.dll)
就会发现右键 ...

好像一直以來就是這樣，需要要自己處理，SP大無法想像有哪些龐大的東西需要預先處理，因為可能有人沒有這個需求

sp_star

2011_Pia1024 发表于 2014-1-6 20:37
像是7-zip 如果没有注册(登录) .DLL (regsvr32.exe /s "%ProgramFiles%\7-Zip\7-zip.dll)
就会发现右键 ...

这是通过注册表来实现的，每个软件都不一样。

2012doberman

sp_star 发表于 2014-1-6 21:16
what "InftoReg" used for? find the dependency of files?

Yes!
Not only. You can integrate it with the driver in Windows, and much more ....

No only describe how to operate it.