【20240517】骨头网络版PE[win10-96M][win8-56M][win7-37M][XP-16M]

bet365 · 发表于 2012-7-13 22:25:26

终于支持无线网络了，顶一下吧。

2010mzx1213cool · 发表于 2012-7-14 09:10:30

谢谢楼主的更新收下了

20120301 · 发表于 2012-7-14 10:49:19

如果是做简单的维护，用这两个启动快的小不点足矣

2011gidon · 发表于 2012-7-17 00:00:42

这么多PE 就是觉得这个比较好用，快又小，又全一点，兼容也好

无垠 · 发表于 2012-7-17 11:27:40

请教，修改xppe注册表什么内容，才能像骨头版xppe一样，支持外置软件 doc xls 自动关联？我试了几次另外的xppe，用骨头版petools中的文本图像工具，图像可以关联，就是doc、xls文件不能自动关联。重新加载regdoc.cmd 也不行

2010dirty · 发表于 2012-7-17 14:51:09

又更新了，感谢！·~

hlstudio · 发表于 2012-7-17 20:57:51

在config/software注册表
classes/doc
classes/OfficeWord

然后在regdoc.cmd中这么引用的
REG ADD HKCR\OfficeWord\shell\open\command /ve /t REG_SZ /d "\"%TP%\文本图像\OFFICE\WORD.EXE\" "\"%%1\" /f>NUL

要是用regtool打开software文件，直接按时间倒序排列，就能看得很清楚了。
还能直接导出为reg文件，再导入到要修改的XPE中即可。

zyk02 · 发表于 2012-7-17 21:02:28

发现我不能上传附件，就把 setupapi.dev.log 贴上来。对realtek 8187l无线网卡，不能显示出来而言。

[Device Install Log]
   OS Version = 6.1.7601
   Service Pack = 0.0
   Suite = 0x0100
   ProductType = 1
   Architecture = x86

[BeginLog]

[Boot Session: 2012/07/17 20:23:14.453]

>>>  [Device Install (Hardware initiated) - ACPI\GenuineIntel_-_x86_Family_6_Model_14_-_Intel(R)_Celeron(R)_M_CPU________440__@_1.86GHz\_1]
>>>  Section start 2012/07/17 20:23:24.750
   ump: Creating Install Process: DrvInst.exe 20:23:24.750
   ndv: Retrieving device info...
   ndv: Setting device parameters...
   ndv: Searching Driver Store and Device Path...
   dvi: {Build Driver List} 20:23:24.796
   dvi:    Searching for hardware ID(s):
   dvi:          acpi\genuineintel_-_x86_family_6_model_14
   dvi:          *genuineintel_-_x86_family_6_model_14
   dvi:          acpi\genuineintel_-_x86_family_6
   dvi:          *genuineintel_-_x86_family_6
   dvi:          acpi\genuineintel_-_x86
   dvi:          *genuineintel_-_x86
   dvi:    Searching for compatible ID(s):
   dvi:          acpi\processor
   cpy:    Policy is set to make all digital signatures equal.
   dvi:    Enumerating INFs from path list 'X:\WINDOWS\inf'
! inf:    Detected INFCACHE inconsistency
! inf:    Attempting INFCACHE repair 20:23:24.796
! inf:    Verify/Fix on INFCACHE complete, status(4) - Fixed 20:23:25.046
   inf:    Searched 0 potential matches in published INF directory
   inf:    Searched 2 INFs in directory: 'X:\WINDOWS\inf'
   dvi: {Build Driver List - exit(0x00000000)} 20:23:25.062
   ndv: Selecting best match from Driver Store (including Device Path)...
   dvi: {DIF_SELECTBESTCOMPATDRV} 20:23:25.062
   dvi:    Using exported function 'ProcessorClassInstall' in module 'X:\WINDOWS\system32\procinst.dll'.
   dvi:    Class installer == procinst.dll,ProcessorClassInstall
   dvi:    No CoInstallers found
   dvi:    Class installer: Enter 20:23:25.125
   dvi:    Class installer: Exit
   dvi:    Default installer: Enter 20:23:25.125
   dvi:          {Select Best Driver}
! dvi:             Selecting driver failed(0xe0000228)
   dvi:          {Select Best Driver - exit(0xe0000228)}
! dvi:    Default installer: failed!
   dvi: {DIF_SELECTBESTCOMPATDRV - exit(0xe0000228)} 20:23:25.125
   ndv: {Core Device Install} 20:23:25.125
! ndv:    Installing NULL driver!
   dvi:    Set selected driver complete.
   dvi:    {DIF_ALLOW_INSTALL} 20:23:25.125
   dvi:          Class installer: Enter 20:23:25.125
   dvi:          Class installer: Exit
   dvi:          Default installer: Enter 20:23:25.125
   dvi:          Default installer: Exit
   dvi:    {DIF_ALLOW_INSTALL - exit(0xe000020e)} 20:23:25.125
   dvi:    {DIF_INSTALLDEVICE} 20:23:25.125
   dvi:          Class installer: Enter 20:23:25.125
! dvi:             Installing NULL driver!
   dvi:             Writing common driver property settings.
! dvi:             Failed to set Device Description property: (null)
   dvi:             {Restarting Devices} 20:23:25.140
   dvi:                   Restart: ACPI\GENUINEINTEL_-_X86_FAMILY_6_MODEL_14_-_INTEL(R)_CELERON(R)_M_CPU________440__@_1.86GHZ\_1
   dvi:                   Restart complete.
   dvi:             {Restarting Devices exit} 20:23:25.140
   dvi:          Class installer: Exit
   dvi:    {DIF_INSTALLDEVICE - exit(0x00000000)} 20:23:25.140
   ndv:    Device install status=0xe0000203
   ndv:    Performing device install final cleanup...
! ndv:    Queueing up error report since device installation failed...
   ndv: {Core Device Install - exit(0xe0000203)} 20:23:25.140
   dvi: {DIF_DESTROYPRIVATEDATA} 20:23:25.140
   dvi:    Class installer: Enter 20:23:25.140
   dvi:    Class installer: Exit
   dvi:    Default installer: Enter 20:23:25.140
   dvi:    Default installer: Exit
   dvi: {DIF_DESTROYPRIVATEDATA - exit(0xe000020e)} 20:23:25.140
   ump: Server install process exited with code 0xe0000203 20:23:25.265
<<<  Section end 2012/07/17 20:23:25.265
<<<  [Exit status: FAILURE(0xe0000203)]

>>>  [Device Install (Hardware initiated) - PCI\VEN_8086&DEV_27D8&SUBSYS_0F701019&REV_02\3&11583659&0&D8]
>>>  Section start 2012/07/17 20:23:24.765
   ump: Creating Install Process: DrvInst.exe 20:23:24.765
   ndv: Retrieving device info...
   ndv: Setting device parameters...
   ndv: Searching Driver Store and Device Path...
   dvi: {Build Driver List} 20:23:24.906
   dvi:    Searching for hardware ID(s):
   dvi:          pci\ven_8086&dev_27d8&subsys_0f701019&rev_02
   dvi:          pci\ven_8086&dev_27d8&subsys_0f701019
   dvi:          pci\ven_8086&dev_27d8&cc_040300
   dvi:          pci\ven_8086&dev_27d8&cc_0403
   dvi:    Searching for compatible ID(s):
   dvi:          pci\ven_8086&dev_27d8&rev_02
   dvi:          pci\ven_8086&dev_27d8
   dvi:          pci\ven_8086&cc_040300
   dvi:          pci\ven_8086&cc_0403
   dvi:          pci\ven_8086
   dvi:          pci\cc_040300
   dvi:          pci\cc_0403
   cpy:    Policy is set to make all digital signatures equal.
   dvi:    Enumerating INFs from path list 'X:\WINDOWS\inf'
! inf:    Detected INFCACHE inconsistency
! inf:    Attempting INFCACHE repair 20:23:25.468
! inf:    Verify/Fix on INFCACHE complete, status(4) - Fixed 20:23:25.640
   inf:    Searched 0 potential matches in published INF directory
   inf:    Searched 2 INFs in directory: 'X:\WINDOWS\inf'
   dvi: {Build Driver List - exit(0x00000000)} 20:23:26.562
   ndv: Selecting best match from Driver Store (including Device Path)...
   dvi: {DIF_SELECTBESTCOMPATDRV} 20:23:26.562
   dvi:    No class installer for 'PCI Device'
   dvi:    Using exported function 'CriticalDeviceCoInstaller' in module 'X:\WINDOWS\system32\SysClass.Dll'.
   dvi:    CoInstaller 1 == SysClass.Dll,CriticalDeviceCoInstaller
   dvi:    CoInstaller 1: Enter 20:23:26.625
   dvi:    CoInstaller 1: Exit
   dvi:    Default installer: Enter 20:23:26.625
   dvi:          {Select Best Driver}
! dvi:             Selecting driver failed(0xe0000228)
   dvi:          {Select Best Driver - exit(0xe0000228)}
! dvi:    Default installer: failed!
   dvi: {DIF_SELECTBESTCOMPATDRV - exit(0xe0000228)} 20:23:26.625
   ndv: {Core Device Install} 20:23:26.625
! ndv:    Installing NULL driver!
   dvi:    Set selected driver complete.
   dvi:    {DIF_ALLOW_INSTALL} 20:23:26.671
   dvi:          No class installer for 'PCI Device'
   dvi:          CoInstaller 1: Enter 20:23:26.671
   dvi:          CoInstaller 1: Exit
   dvi:          Default installer: Enter 20:23:26.671
   dvi:          Default installer: Exit
   dvi:    {DIF_ALLOW_INSTALL - exit(0xe000020e)} 20:23:26.671
   dvi:    {DIF_INSTALLDEVICE} 20:23:26.671
   dvi:          No class installer for 'PCI Device'
   dvi:          CoInstaller 1: Enter 20:23:26.671
   dvi:          CoInstaller 1: Exit
   dvi:          Default installer: Enter 20:23:26.671
! dvi:             Installing NULL driver!
   dvi:             Writing common driver property settings.
   dvi:             {Restarting Devices} 20:23:26.671
   dvi:                   Restart: PCI\VEN_8086&DEV_27D8&SUBSYS_0F701019&REV_02\3&11583659&0&D8
   dvi:                   Restart complete.
   dvi:             {Restarting Devices exit} 20:23:26.687
   dvi:          Default installer: Exit
   dvi:          CoInstaller 1: Enter (Post Processing) 20:23:26.687
   dvi:          CoInstaller 1: Exit (Post Processing)
   dvi:    {DIF_INSTALLDEVICE - exit(0x00000000)} 20:23:26.687
   ndv:    Device install status=0xe0000203
   ndv:    Performing device install final cleanup...
! ndv:    Queueing up error report since device installation failed...
   ndv: {Core Device Install - exit(0xe0000203)} 20:23:26.687
   dvi: {DIF_DESTROYPRIVATEDATA} 20:23:26.687
   dvi:    CoInstaller 1: Enter 20:23:26.687
   dvi:    CoInstaller 1: Exit
   dvi:    Default installer: Enter 20:23:26.687
   dvi:    Default installer: Exit
   dvi: {DIF_DESTROYPRIVATEDATA - exit(0xe000020e)} 20:23:26.687
   ump: Server install process exited with code 0xe0000203 20:23:26.812
<<<  Section end 2012/07/17 20:23:26.812
<<<  [Exit status: FAILURE(0xe0000203)]

>>>  [Device Install (Hardware initiated) - PCI\VEN_1217&DEV_00F7&SUBSYS_0F701019&REV_02\4&1f66df41&0&38F0]
>>>  Section start 2012/07/17 20:23:24.781
   ump: Creating Install Process: DrvInst.exe 20:23:24.781
   ndv: Retrieving device info...
   ndv: Setting device parameters...
   ndv: Searching Driver Store and Device Path...
   dvi: {Build Driver List} 20:23:24.906
   dvi:    Searching for hardware ID(s):
   dvi:          pci\ven_1217&dev_00f7&subsys_0f701019&rev_02
   dvi:          pci\ven_1217&dev_00f7&subsys_0f701019
   dvi:          pci\ven_1217&dev_00f7&cc_0c0010
   dvi:          pci\ven_1217&dev_00f7&cc_0c00
   dvi:    Searching for compatible ID(s):
   dvi:          pci\ven_1217&dev_00f7&rev_02
   dvi:          pci\ven_1217&dev_00f7
   dvi:          pci\ven_1217&cc_0c0010
   dvi:          pci\ven_1217&cc_0c00
   dvi:          pci\ven_1217
   dvi:          pci\cc_0c0010
   dvi:          pci\cc_0c00
   cpy:    Policy is set to make all digital signatures equal.
   dvi:    Enumerating INFs from path list 'X:\WINDOWS\inf'
! inf:    Detected INFCACHE inconsistency
! inf:    Attempting INFCACHE repair 20:23:25.468
! inf:    Verify/Fix on INFCACHE complete, status(4) - Fixed 20:23:26.578
   inf:    Searched 0 potential matches in published INF directory
   inf:    Searched 2 INFs in directory: 'X:\WINDOWS\inf'
   dvi: {Build Driver List - exit(0x00000000)} 20:23:26.593
   ndv: Selecting best match from Driver Store (including Device Path)...
   dvi: {DIF_SELECTBESTCOMPATDRV} 20:23:26.593
   dvi:    No class installer for 'IEEE 1394 Controller'
   dvi:    No CoInstallers found
   dvi:    Default installer: Enter 20:23:26.625
   dvi:          {Select Best Driver}
! dvi:             Selecting driver failed(0xe0000228)
   dvi:          {Select Best Driver - exit(0xe0000228)}
! dvi:    Default installer: failed!
   dvi: {DIF_SELECTBESTCOMPATDRV - exit(0xe0000228)} 20:23:26.625
   ndv: Waiting for previous device install to complete. 20:23:26.625
   ndv: {Core Device Install} 20:23:26.687
! ndv:    Installing NULL driver!
   dvi:    Set selected driver complete.
   dvi:    {DIF_ALLOW_INSTALL} 20:23:26.687
   dvi:          No class installer for 'IEEE 1394 Controller'
   dvi:          Default installer: Enter 20:23:26.687
   dvi:          Default installer: Exit
   dvi:    {DIF_ALLOW_INSTALL - exit(0xe000020e)} 20:23:26.687
   dvi:    {DIF_INSTALLDEVICE} 20:23:26.687
   dvi:          No class installer for 'IEEE 1394 Controller'
   dvi:          Default installer: Enter 20:23:26.687
! dvi:             Installing NULL driver!
   dvi:             Writing common driver property settings.
   dvi:             {Restarting Devices} 20:23:26.828
   dvi:                   Restart: PCI\VEN_1217&DEV_00F7&SUBSYS_0F701019&REV_02\4&1F66DF41&0&38F0
   dvi:                   Restart complete.
   dvi:             {Restarting Devices exit} 20:23:26.828
   dvi:          Default installer: Exit
   dvi:    {DIF_INSTALLDEVICE - exit(0x00000000)} 20:23:26.828
   ndv:    Device install status=0xe0000203
   ndv:    Performing device install final cleanup...
! ndv:    Queueing up error report since device installation failed...
   ndv: {Core Device Install - exit(0xe0000203)} 20:23:26.828
   ump: Server install process exited with code 0xe0000203 20:23:26.843
<<<  Section end 2012/07/17 20:23:26.843
<<<  [Exit status: FAILURE(0xe0000203)]

>>>  [Device Install (DiInstallDriver) - E:\Win7X86\Netrtuw.inf]
>>>  Section start 2012/07/17 20:26:25.843
   cmd: pecmd  devi Netrtuw.inf
   inf: {SetupCopyOEMInf: E:\Win7X86\Netrtuw.inf} 20:26:25.843
   inf:    Opened INF: 'E:\Win7X86\Netrtuw.inf' ([strings])
! inf:    Add to Driver Store unsuccessful
!!!  inf:    returning failure to SetupCopyOEMInf
   inf: {SetupCopyOEMInf exit (0x0000007f)} 20:26:25.890
<<<  Section end 2012/07/17 20:26:25.890
<<<  [Exit status: FAILURE(0x0000007f)]

hlstudio · 发表于 2012-7-17 21:18:27

贴上最后一个小节就行，就是如下部分，有你执行pecmd devi netrtuw.inf命令。
>>>  [Device Install (DiInstallDriver) - E:\Win7X86\Netrtuw.inf]
>>>  Section start 2012/07/17 20:26:25.843
   cmd: pecmd  devi Netrtuw.inf
   inf: {SetupCopyOEMInf: E:\Win7X86\Netrtuw.inf} 20:26:25.843
   inf:    Opened INF: 'E:\Win7X86\Netrtuw.inf' ([strings])
! inf:    Add to Driver Store unsuccessful
!!!  inf:    returning failure to SetupCopyOEMInf
   inf: {SetupCopyOEMInf exit (0x0000007f)} 20:26:25.890
<<<  Section end 2012/07/17 20:26:25.890
<<<  [Exit status: FAILURE(0x0000007f)]

请确认以下两件事：
①执行pecmd devi命令是在启用网络组件之后吧。
②无线网卡是内置的，还是外插的USB无线网卡。

再把这个Netrtuw.inf的内容也贴下。

zyk02 · 发表于 2012-7-18 00:04:06

不好意思，上次急了一点，重新来过。无线网卡是外插的USB无线网卡。把自己的驱动包删除了rtl8187b，不知有没有关系？
楼主请看：

以下是 setupapi.dev.log 的部分内容：

>>>  [Device Install (DiInstallDriver) - E:\Win7X86\Netrtuw.inf]
>>>  Section start 2012/07/17 23:30:22.421
   cmd: pecmd  devi Netrtuw.inf
   inf: {SetupCopyOEMInf: E:\Win7X86\Netrtuw.inf} 23:30:22.421
   sto:    {Import Driver Package: E:\Win7X86\Netrtuw.inf} 23:30:22.468
   sto:          Importing driver package into Driver Store:
   sto:             Driver Store = X:\WINDOWS\System32\DriverStore (Online | 6.1.7601)
   sto:             Driver Package = E:\Win7X86\Netrtuw.inf
   sto:             Architecture = x86
   sto:             Locale Name = neutral
   sto:             Flags       = 0x00001000
   sto:          Copying driver package files to 'X:\Users\Default\AppData\Local\Temp\{2acae291-e221-5164-9a29-9e575d24180b}'.
   inf:          Opened INF: 'E:\Win7X86\Netrtuw.inf' ([strings])
   inf:          Opened INF: 'E:\Win7X86\Netrtuw.inf' ([strings])
   flq:          {FILE_QUEUE_COPY}
   flq:             CopyStyle    - 0x00000000
   flq:             SourceRootPath - 'E:\Win7X86'
   flq:             SourceFilename - 'netrtuw.cat'
   flq:             TargetDirectory- 'X:\Users\Default\AppData\Local\Temp\{2acae291-e221-5164-9a29-9e575d24180b}'
   flq:          {FILE_QUEUE_COPY exit(0x00000000)}
   flq:          {FILE_QUEUE_COPY}
   flq:             CopyStyle    - 0x00000000
   flq:             SourceRootPath - 'E:\Win7X86'
   flq:             SourceFilename - 'Netrtuw.inf'
   flq:             TargetDirectory- 'X:\Users\Default\AppData\Local\Temp\{2acae291-e221-5164-9a29-9e575d24180b}'
   flq:          {FILE_QUEUE_COPY exit(0x00000000)}
   flq:          {FILE_QUEUE_COPY}
   flq:             CopyStyle    - 0x00000000
   flq:             SourceRootPath - 'E:\Win7X86'
   flq:             SourceFilename - 'RTL8187.sys'
   flq:             TargetDirectory- 'X:\Users\Default\AppData\Local\Temp\{2acae291-e221-5164-9a29-9e575d24180b}'
   flq:          {FILE_QUEUE_COPY exit(0x00000000)}
   flq:          {_commit_file_queue}
   flq:             CommitQ DelNodes=0 RenNodes=0 CopyNodes=3
   flq:             {_commit_copy_subqueue}
   flq:                   subqueue count=3
   flq:                   source media:
   flq:                         SourcePath - [E:\Win7X86]
   flq:                         SourceFile - [netrtuw.cat]
   flq:                         Flags       - 0x00000000
   flq:                   {_commit_copyfile}
   flq:                         CopyFile: 'E:\Win7X86\netrtuw.cat'
   flq:                               to: 'X:\Users\Default\AppData\Local\Temp\{2acae291-e221-5164-9a29-9e575d24180b}\SETCD25.tmp'
   flq:                         MoveFile: 'X:\Users\Default\AppData\Local\Temp\{2acae291-e221-5164-9a29-9e575d24180b}\SETCD25.tmp'
   flq:                               to: 'X:\Users\Default\AppData\Local\Temp\{2acae291-e221-5164-9a29-9e575d24180b}\netrtuw.cat'
   flq:                   {_commit_copyfile exit OK}
   flq:                   {_commit_copyfile}
   flq:                         CopyFile: 'E:\Win7X86\Netrtuw.inf'
   flq:                               to: 'X:\Users\Default\AppData\Local\Temp\{2acae291-e221-5164-9a29-9e575d24180b}\SETCD26.tmp'
   flq:                         MoveFile: 'X:\Users\Default\AppData\Local\Temp\{2acae291-e221-5164-9a29-9e575d24180b}\SETCD26.tmp'
   flq:                               to: 'X:\Users\Default\AppData\Local\Temp\{2acae291-e221-5164-9a29-9e575d24180b}\Netrtuw.inf'
   flq:                   {_commit_copyfile exit OK}
   flq:                   {_commit_copyfile}
   flq:                         CopyFile: 'E:\Win7X86\RTL8187.sys'
   flq:                               to: 'X:\Users\Default\AppData\Local\Temp\{2acae291-e221-5164-9a29-9e575d24180b}\SETCD55.tmp'
   flq:                         MoveFile: 'X:\Users\Default\AppData\Local\Temp\{2acae291-e221-5164-9a29-9e575d24180b}\SETCD55.tmp'
   flq:                               to: 'X:\Users\Default\AppData\Local\Temp\{2acae291-e221-5164-9a29-9e575d24180b}\RTL8187.sys'
   flq:                   {_commit_copyfile exit OK}
   flq:             {_commit_copy_subqueue exit OK}
   flq:          {_commit_file_queue exit OK}
   pol:          {Driver package policy check} 23:30:22.578
   pol:          {Driver package policy check - exit(0x00000000)} 23:30:22.578
   sto:          {Stage Driver Package: X:\Users\Default\AppData\Local\Temp\{2acae291-e221-5164-9a29-9e575d24180b}\Netrtuw.inf} 23:30:22.578
   inf:             Opened INF: 'X:\Users\Default\AppData\Local\Temp\{2acae291-e221-5164-9a29-9e575d24180b}\Netrtuw.inf' ([strings])
   inf:             Opened INF: 'X:\Users\Default\AppData\Local\Temp\{2acae291-e221-5164-9a29-9e575d24180b}\Netrtuw.inf' ([strings])
   sto:             Copying driver package files:
   sto:                   Source Path    = X:\Users\Default\AppData\Local\Temp\{2acae291-e221-5164-9a29-9e575d24180b}
   sto:                   Destination Path = X:\WINDOWS\System32\DriverStore\Temp\{7fe6b078-da5e-6ead-4cba-9f2a599be728}
   flq:             {FILE_QUEUE_COPY}
   flq:                   CopyStyle    - 0x00000010
   flq:                   SourceRootPath - 'X:\Users\Default\AppData\Local\Temp\{2acae291-e221-5164-9a29-9e575d24180b}'
   flq:                   SourceFilename - 'netrtuw.cat'
   flq:                   TargetDirectory- 'X:\WINDOWS\System32\DriverStore\Temp\{7fe6b078-da5e-6ead-4cba-9f2a599be728}'
   flq:             {FILE_QUEUE_COPY exit(0x00000000)}
   flq:             {FILE_QUEUE_COPY}
   flq:                   CopyStyle    - 0x00000010
   flq:                   SourceRootPath - 'X:\Users\Default\AppData\Local\Temp\{2acae291-e221-5164-9a29-9e575d24180b}'
   flq:                   SourceFilename - 'Netrtuw.inf'
   flq:                   TargetDirectory- 'X:\WINDOWS\System32\DriverStore\Temp\{7fe6b078-da5e-6ead-4cba-9f2a599be728}'
   flq:             {FILE_QUEUE_COPY exit(0x00000000)}
   flq:             {FILE_QUEUE_COPY}
   flq:                   CopyStyle    - 0x00000010
   flq:                   SourceRootPath - 'X:\Users\Default\AppData\Local\Temp\{2acae291-e221-5164-9a29-9e575d24180b}'
   flq:                   SourceFilename - 'RTL8187.sys'
   flq:                   TargetDirectory- 'X:\WINDOWS\System32\DriverStore\Temp\{7fe6b078-da5e-6ead-4cba-9f2a599be728}'
   flq:             {FILE_QUEUE_COPY exit(0x00000000)}
   flq:             {_commit_file_queue}
   flq:                   CommitQ DelNodes=0 RenNodes=0 CopyNodes=3
   flq:                   {_commit_copy_subqueue}
   flq:                         subqueue count=3
   flq:                         source media:
   flq:                            SourcePath - [X:\Users\Default\AppData\Local\Temp\{2acae291-e221-5164-9a29-9e575d24180b}]
   flq:                            SourceFile - [netrtuw.cat]
   flq:                            Flags       - 0x00000000
   flq:                         {_commit_copyfile}
   flq:                            CopyFile: 'X:\Users\Default\AppData\Local\Temp\{2acae291-e221-5164-9a29-9e575d24180b}\netrtuw.cat'
   flq:                                  to: 'X:\WINDOWS\System32\DriverStore\Temp\{7fe6b078-da5e-6ead-4cba-9f2a599be728}\SETCDA2.tmp'
   flq:                            MoveFile: 'X:\WINDOWS\System32\DriverStore\Temp\{7fe6b078-da5e-6ead-4cba-9f2a599be728}\SETCDA2.tmp'
   flq:                                  to: 'X:\WINDOWS\System32\DriverStore\Temp\{7fe6b078-da5e-6ead-4cba-9f2a599be728}\netrtuw.cat'
   flq:                         {_commit_copyfile exit OK}
   flq:                         {_commit_copyfile}
   flq:                            CopyFile: 'X:\Users\Default\AppData\Local\Temp\{2acae291-e221-5164-9a29-9e575d24180b}\Netrtuw.inf'
   flq:                                  to: 'X:\WINDOWS\System32\DriverStore\Temp\{7fe6b078-da5e-6ead-4cba-9f2a599be728}\SETCDA3.tmp'
   flq:                            MoveFile: 'X:\WINDOWS\System32\DriverStore\Temp\{7fe6b078-da5e-6ead-4cba-9f2a599be728}\SETCDA3.tmp'
   flq:                                  to: 'X:\WINDOWS\System32\DriverStore\Temp\{7fe6b078-da5e-6ead-4cba-9f2a599be728}\Netrtuw.inf'
   flq:                         {_commit_copyfile exit OK}
   flq:                         {_commit_copyfile}
   flq:                            CopyFile: 'X:\Users\Default\AppData\Local\Temp\{2acae291-e221-5164-9a29-9e575d24180b}\RTL8187.sys'
   flq:                                  to: 'X:\WINDOWS\System32\DriverStore\Temp\{7fe6b078-da5e-6ead-4cba-9f2a599be728}\SETCDA4.tmp'
   flq:                            MoveFile: 'X:\WINDOWS\System32\DriverStore\Temp\{7fe6b078-da5e-6ead-4cba-9f2a599be728}\SETCDA4.tmp'
   flq:                                  to: 'X:\WINDOWS\System32\DriverStore\Temp\{7fe6b078-da5e-6ead-4cba-9f2a599be728}\RTL8187.sys'
   flq:                         {_commit_copyfile exit OK}
   flq:                   {_commit_copy_subqueue exit OK}
   flq:             {_commit_file_queue exit OK}
   sto:             {DRIVERSTORE_IMPORT_NOTIFY_VALIDATE} 23:30:22.656
   inf:                   Opened INF: 'X:\WINDOWS\System32\DriverStore\Temp\{7fe6b078-da5e-6ead-4cba-9f2a599be728}\Netrtuw.inf' ([strings])
   sto:                   Validating driver package files against catalog 'netrtuw.cat'.
   sto:                   Driver package is valid.
   sto:             {DRIVERSTORE_IMPORT_NOTIFY_VALIDATE exit(0x00000000)} 23:30:22.671
   sto:             Verified driver package signature:
   sto:                   Digital Signer Score = 0x00000000
   sto:                   Digital Signer Name  = <unknown>
   sto:             {DRIVERSTORE_IMPORT_NOTIFY_BEGIN} 23:30:22.671
   ndv:                   System restore not required for signed driver package.
   sto:             {DRIVERSTORE_IMPORT_NOTIFY_BEGIN: exit(0x00000000)} 23:30:22.671
   sto:             Importing driver package files:
   sto:                   Source Path    = X:\WINDOWS\System32\DriverStore\Temp\{7fe6b078-da5e-6ead-4cba-9f2a599be728}
   sto:                   Destination Path = X:\WINDOWS\System32\DriverStore\FileRepository\netrtuw.inf_x86_neutral_1116baaf4ebbe2a4
   sto:             {Copy Directory: X:\WINDOWS\System32\DriverStore\Temp\{7fe6b078-da5e-6ead-4cba-9f2a599be728}} 23:30:22.671
   sto:                   Target Path = X:\WINDOWS\System32\DriverStore\FileRepository\netrtuw.inf_x86_neutral_1116baaf4ebbe2a4
   sto:             {Copy Directory: exit(0x00000000)} 23:30:22.687
   sto:             {Index Driver Package: X:\WINDOWS\System32\DriverStore\FileRepository\netrtuw.inf_x86_neutral_1116baaf4ebbe2a4\Netrtuw.inf} 23:30:22.687
   idb:                   Registered driver store entry 'netrtuw.inf_x86_neutral_1116baaf4ebbe2a4'.
   idb:                   Published 'netrtuw.inf_x86_neutral_1116baaf4ebbe2a4\netrtuw.inf' to 'X:\WINDOWS\INF\oem2.inf'
   idb:                   Published driver store entry 'netrtuw.inf_x86_neutral_1116baaf4ebbe2a4'.
   sto:                   Published driver package INF 'oem2.inf' was changed.
   sto:                   Active published driver package is 'netrtuw.inf_x86_neutral_1116baaf4ebbe2a4'.
   sto:             {Index Driver Package: exit(0x00000000)} 23:30:22.718
   sto:             {DRIVERSTORE_IMPORT_NOTIFY_END} 23:30:22.718
   ndv:                   No system restore point was set earlier.
   sto:             {DRIVERSTORE_IMPORT_NOTIFY_END: exit(0x00000000)} 23:30:22.718
   sto:          {Stage Driver Package: exit(0x00000000)} 23:30:22.718
   ndv:          Doing device matching lookup!
   inf:          Opened INF: 'X:\WINDOWS\System32\DriverStore\FileRepository\netrtuw.inf_x86_neutral_1116baaf4ebbe2a4\Netrtuw.inf' ([strings])
   sto:          Driver package was staged to Driver Store. Time = 188 ms
   sto:          Imported driver package into Driver Store:
   sto:             Filename = X:\WINDOWS\System32\DriverStore\FileRepository\netrtuw.inf_x86_neutral_1116baaf4ebbe2a4\Netrtuw.inf
   sto:             Time    = 266 ms
   sto:    {Import Driver Package: exit(0x00000000)} 23:30:22.750
   inf:    Opened INF: 'E:\Win7X86\Netrtuw.inf' ([strings])
   inf:    Driver Store location: X:\WINDOWS\System32\DriverStore\FileRepository\netrtuw.inf_x86_neutral_1116baaf4ebbe2a4\Netrtuw.inf
   inf:    Published Inf Path: X:\WINDOWS\INF\oem2.inf
   inf:    Opened INF: 'E:\Win7X86\Netrtuw.inf' ([strings])
   inf:    Installing catalog netrtuw.cat as: oem2.CAT
   inf:    OEM source media location: E:\Win7X86\
   inf: {SetupCopyOEMInf exit (0x00000000)} 23:30:22.765
   inf: Opened INF: 'E:\Win7X86\Netrtuw.inf' ([strings])
   dvi: Set selected driver complete.
   dvi: {Build Driver List} 23:30:22.796
   dvi:    Searching for hardware ID(s):
   dvi:          usb\vid_0bda&pid_8187&rev_0100
   dvi:          usb\vid_0bda&pid_8187
   dvi:    Searching for compatible ID(s):
   dvi:          usb\class_00&subclass_00&prot_00
   dvi:          usb\class_00&subclass_00
   dvi:          usb\class_00
   cpy:    Policy is set to make all digital signatures equal.
   dvi:    Processing a single INF: 'e:\win7x86\netrtuw.inf'
   inf:    Opened INF: 'e:\win7x86\netrtuw.inf' ([strings])
   dvi:    Created Driver Node:
   dvi:          HardwareID - USB\VID_0BDA&PID_8187&REV_0100
   dvi:          InfName    - e:\win7x86\netrtuw.inf
   dvi:          DevDesc    - Realtek RTL8187 Wireless 802.11b/g 54Mbps USB 2.0 Network Adapter
   dvi:          DrvDesc    - Realtek RTL8187 Wireless 802.11b/g 54Mbps USB 2.0 Network Adapter
   dvi:          Provider    - Realtek Semiconductor Corp.
   dvi:          Mfg       - Realtek Semiconductor Corp.
   dvi:          ModelsSec - Realtek.NTx86.6.1
   dvi:          InstallSec - RTL8187.ndi
   dvi:          ActualSec - RTL8187.ndi.NT
   dvi:          Rank       - 0xf0ff0000
   dvi:          Signer    -
   dvi:          Signer Score - Not digitally signed
   dvi:          DrvDate    - 12/09/2009
   dvi:          Version    - 6.1316.1209.2009
   dvi: {Build Driver List - exit(0x00000000)} 23:30:22.812
   dvi: {Build Driver List} 23:30:22.812
   dvi:    Searching for hardware ID(s):
   dvi:          usb\vid_0bda&pid_8187&rev_0100
   dvi:          usb\vid_0bda&pid_8187
   dvi:    Searching for compatible ID(s):
   dvi:          usb\class_00&subclass_00&prot_00
   dvi:          usb\class_00&subclass_00
   dvi:          usb\class_00
   cpy:    Policy is set to make all digital signatures equal.
   dvi:    Unable to retrieve InfPath - likely no driver installed
   dvi: {Build Driver List - exit(0x00000000)} 23:30:22.812
   dvi: {DIF_SELECTBESTCOMPATDRV} 23:30:22.812
   dvi:    Using exported function 'NetClassInstaller' in module 'X:\WINDOWS\system32\NetCfgx.dll'.
   dvi:    Class installer == NetCfgx.dll,NetClassInstaller
   dvi:    Using exported function 'NciDeviceInstall' in module 'X:\WINDOWS\system32\nci.dll'.
   dvi:    CoInstaller 1 == nci.dll,NciDeviceInstall
   dvi:    Using exported function 'WlanDeviceClassCoInstaller' in module 'X:\WINDOWS\system32\wlaninst.dll'.
   dvi:    CoInstaller 2 == wlaninst.dll,WlanDeviceClassCoInstaller
   dvi:    Using exported function 'WwanDeviceClassCoInstaller' in module 'X:\WINDOWS\system32\wwaninst.dll'.
   dvi:    CoInstaller 3 == wwaninst.dll,WwanDeviceClassCoInstaller
   dvi:    CoInstaller 1: Enter 23:30:22.812
   dvi:    CoInstaller 1: Exit
   dvi:    CoInstaller 2: Enter 23:30:22.812
   dvi:    CoInstaller 2: Exit
   dvi:    CoInstaller 3: Enter 23:30:22.812
   dvi:    CoInstaller 3: Exit
   dvi:    Class installer: Enter 23:30:22.812
   dvi:    Class installer: Exit
   dvi:    Default installer: Enter 23:30:22.812
   dvi:          {Select Best Driver}
   dvi:             Selected driver installs from section [RTL8187.ndi] in 'e:\win7x86\netrtuw.inf'.
   dvi:             Class GUID of device changed to: {4d36e972-e325-11ce-bfc1-08002be10318}.
   dvi:             {DIF_DESTROYPRIVATEDATA} 23:30:22.812
   dvi:                   CoInstaller 1: Enter 23:30:22.812
   dvi:                   CoInstaller 1: Exit
   dvi:                   CoInstaller 2: Enter 23:30:22.812
   dvi:                   CoInstaller 2: Exit
   dvi:                   CoInstaller 3: Enter 23:30:22.812
   dvi:                   CoInstaller 3: Exit
   dvi:                   Class installer: Enter 23:30:22.812
   dvi:                   Class installer: Exit
   dvi:             {DIF_DESTROYPRIVATEDATA - exit(0x00000000)} 23:30:22.812
   dvi:             Set selected driver complete.
   dvi:             Selected:
   dvi:                   Description - [Realtek RTL8187 Wireless 802.11b/g 54Mbps USB 2.0 Network Adapter]
   dvi:                   InfFile    - [e:\win7x86\netrtuw.inf]
   dvi:                   Section    - [RTL8187.ndi]
   dvi:                   Signer    - []
   dvi:                   Rank       - [0xf0ff0000]
   dvi:          {Select Best Driver - exit(0x00000000)}
   dvi:    Default installer: Exit
   dvi: {DIF_SELECTBESTCOMPATDRV - exit(0x00000000)} 23:30:22.828
   inf: {SetupCopyOEMInf: e:\win7x86\netrtuw.inf} 23:30:22.828
! inf:    Package was already in store: skipping Driver Store add
   inf:    Driver Store location: X:\WINDOWS\System32\DriverStore\FileRepository\netrtuw.inf_x86_neutral_1116baaf4ebbe2a4\netrtuw.inf
   inf:    Published Inf Path: X:\WINDOWS\INF\oem2.inf
   inf:    OEM source media location: e:\win7x86\
   inf: {SetupCopyOEMInf exit (0x00000000)} 23:30:22.828
   dvi: Searching for hardware ID(s):
   dvi:    usb\vid_0bda&pid_8187&rev_0100
   dvi:    usb\vid_0bda&pid_8187
   dvi: Searching for compatible ID(s):
   dvi:    usb\class_00&subclass_00&prot_00
   dvi:    usb\class_00&subclass_00
   dvi:    usb\class_00
   inf: Opened INF: 'X:\WINDOWS\System32\DriverStore\FileRepository\netrtuw.inf_x86_neutral_1116baaf4ebbe2a4\netrtuw.inf' ([strings])
   dvi: Selected driver installs from section [RTL8187.ndi] in 'x:\windows\system32\driverstore\filerepository\netrtuw.inf_x86_neutral_1116baaf4ebbe2a4\netrtuw.inf'.
   dvi: Class GUID of device changed to: {4d36e972-e325-11ce-bfc1-08002be10318}.
   dvi: Set selected driver complete.
   dvi: {Plug and Play Service: Device Install for USB\VID_0BDA&PID_8187\380A0AA13C23}
   ump:    Creating Install Process: DrvInst.exe 23:30:22.843
   ndv:    Infpath=X:\WINDOWS\INF\oem2.inf
   ndv:    DriverNodeName=netrtuw.inf:Realtek.NTx86.6.1:RTL8187.ndi:6.1316.1209.2009:usb\vid_0bda&pid_8187&rev_0100
   ndv:    DriverStorepath=X:\WINDOWS\System32\DriverStore\FileRepository\netrtuw.inf_x86_neutral_1116baaf4ebbe2a4\netrtuw.inf
   ndv:    Building driver list from driver node strong name...
   dvi:    Searching for hardware ID(s):
   dvi:          usb\vid_0bda&pid_8187&rev_0100
   dvi:          usb\vid_0bda&pid_8187
   dvi:    Searching for compatible ID(s):
   dvi:          usb\class_00&subclass_00&prot_00
   dvi:          usb\class_00&subclass_00
   dvi:          usb\class_00
   inf:    Opened INF: 'X:\WINDOWS\System32\DriverStore\FileRepository\netrtuw.inf_x86_neutral_1116baaf4ebbe2a4\netrtuw.inf' ([strings])
   dvi:    Selected driver installs from section [RTL8187.ndi] in 'x:\windows\system32\driverstore\filerepository\netrtuw.inf_x86_neutral_1116baaf4ebbe2a4\netrtuw.inf'.
   dvi:    Class GUID of device changed to: {4d36e972-e325-11ce-bfc1-08002be10318}.
   dvi:    Set selected driver complete.
   ndv:    {Core Device Install} 23:30:22.859
   inf:          Opened INF: 'X:\WINDOWS\INF\oem2.inf' ([strings])
   dvi:          {DIF_ALLOW_INSTALL} 23:30:22.906
   dvi:             Using exported function 'NetClassInstaller' in module 'X:\WINDOWS\system32\NetCfgx.dll'.
   dvi:             Class installer == NetCfgx.dll,NetClassInstaller
   dvi:             Using exported function 'NciDeviceInstall' in module 'X:\WINDOWS\system32\nci.dll'.
   dvi:             CoInstaller 1 == nci.dll,NciDeviceInstall
   dvi:             Using exported function 'WlanDeviceClassCoInstaller' in module 'X:\WINDOWS\system32\wlaninst.dll'.
   dvi:             CoInstaller 2 == wlaninst.dll,WlanDeviceClassCoInstaller
   dvi:             Using exported function 'WwanDeviceClassCoInstaller' in module 'X:\WINDOWS\system32\wwaninst.dll'.
   dvi:             CoInstaller 3 == wwaninst.dll,WwanDeviceClassCoInstaller
   dvi:             CoInstaller 1: Enter 23:30:22.906
   dvi:             CoInstaller 1: Exit
   dvi:             CoInstaller 2: Enter 23:30:22.906
   dvi:             CoInstaller 2: Exit
   dvi:             CoInstaller 3: Enter 23:30:22.906
   dvi:             CoInstaller 3: Exit
   dvi:             Class installer: Enter 23:30:22.906
   inf:                   Opened INF: 'X:\WINDOWS\INF\oem2.inf' ([strings])
   inf:                   AddReg=RTL8187.common.reg,RTLWLAN.reg,RTL8187_os61.reg  (oem2.inf line 62)
   dvi:             Class installer: Exit
   dvi:             Default installer: Enter 23:30:22.921
   dvi:             Default installer: Exit
   dvi:          {DIF_ALLOW_INSTALL - exit(0xe000020e)} 23:30:22.921
   ndv:          Installing files...
   dvi:          {DIF_INSTALLDEVICEFILES} 23:30:22.921
   dvi:             CoInstaller 1: Enter 23:30:22.921
   dvi:             CoInstaller 1: Exit
   dvi:             CoInstaller 2: Enter 23:30:22.921
   dvi:             CoInstaller 2: Exit
   dvi:             CoInstaller 3: Enter 23:30:22.921
   dvi:             CoInstaller 3: Exit
   dvi:             Class installer: Enter 23:30:22.921
   dvi:             Class installer: Exit
   dvi:             Default installer: Enter 23:30:22.921
   dvi:                   {Install FILES}
   inf:                         Opened INF: 'x:\windows\system32\driverstore\filerepository\netrtuw.inf_x86_neutral_1116baaf4ebbe2a4\netrtuw.inf' ([strings])
   inf:                         {Install Inf Section [RTL8187.ndi.NT]}
   inf:                            CopyFiles=RTL8187.CopyFiles  (netrtuw.inf line 65)
   cpy:                            Open PnpLockdownPolicy: Err=2. This is OK. Use LockDownPolicyDefault
   flq:                            QueueSingleCopy...
   flq:                            Inf    : 'x:\windows\system32\driverstore\filerepository\netrtuw.inf_x86_neutral_1116baaf4ebbe2a4\netrtuw.inf'
   flq:                            SourceInf: 'x:\windows\system32\driverstore\filerepository\netrtuw.inf_x86_neutral_1116baaf4ebbe2a4\netrtuw.inf'
   flq:                            SourceSection: [sourcedisksfiles]
   flq:                            Source root path based on SourceInf
   flq:                            SourceRootPath: 'X:\WINDOWS\System32\DriverStore\FileRepository\netrtuw.inf_x86_neutral_1116baaf4ebbe2a4'
   flq:                            {FILE_QUEUE_COPY}
   flq:                                  CopyStyle    - 0x00000400
   flq:                                  {FILE_QUEUE_COPY}
   flq:                                        CopyStyle    - 0x00000400
   flq:                                        SourceRootPath - 'X:\WINDOWS\System32\DriverStore\FileRepository\netrtuw.inf_x86_neutral_1116baaf4ebbe2a4'
   flq:                                        SourceFilename - 'RTL8187.sys'
   flq:                                        TargetDirectory- 'X:\WINDOWS\system32\DRIVERS'
   flq:                                        TargetFilename - 'RTL8187.sys'
   flq:                                        SourceDesc    - 'Realtek RTL8187 Wireless 802.11b/g 54Mbps USB 2.0 Network Adapter Driver Disk'
   flq:                                  {FILE_QUEUE_COPY exit(0x00000000)}
   flq:                            {FILE_QUEUE_COPY exit(0x00000000)}
   inf:                         {Install Inf Section [RTL8187.ndi.NT] exit (0x00000000)}
   dvi:                         Processing co-installer registration section [RTL8187.ndi.NT.CoInstallers].
   inf:                         {Install Inf Section [RTL8187.ndi.NT.CoInstallers]}
   inf:                         {Install Inf Section [RTL8187.ndi.NT.CoInstallers] exit (0x00000000)}
   dvi:                         Co-installers registered.
   dvi:                         {Install INTERFACES}
   dvi:                            Installing section [RTL8187.ndi.NT.Interfaces]
   dvi:                         {Install INTERFACES exit 00000000}
   dvi:                   {Install FILES exit (0x00000000)}
   dvi:             Default installer: Exit
   dvi:          {DIF_INSTALLDEVICEFILES - exit(0x00000000)} 23:30:22.937
   ndv:          Pruning file queue...
   dvi:          {_SCAN_FILE_QUEUE}
   flq:             ScanQ flags=620
   flq:                   SPQ_SCAN_PRUNE_COPY_QUEUE
   flq:                   SPQ_SCAN_FILE_COMPARISON
   flq:                   SPQ_SCAN_ACTIVATE_DRP
   flq:             ScanQ number of copy nodes=1
   flq:             ScanQ action=200 DoPruning=32
   flq:             ScanQ end Validity flags=620 CopyNodes=1
   dvi:          {_SCAN_FILE_QUEUE exit(0, 0x00000000)}
   ndv:          Committing file queue...
   flq:          {_commit_file_queue}
   flq:             CommitQ DelNodes=0 RenNodes=0 CopyNodes=1
   flq:             {SPFILENOTIFY_STARTQUEUE}
   flq:             {SPFILENOTIFY_STARTQUEUE - exit(0x00000001)}
   flq:             {_commit_copy_subqueue}
   flq:                   subqueue count=1
   flq:                   {SPFILENOTIFY_STARTSUBQUEUE}
   flq:                   {SPFILENOTIFY_STARTSUBQUEUE - exit(0x00000001)}
   flq:                   source media:
   flq:                         Description  - [Realtek RTL8187 Wireless 802.11b/g 54Mbps USB 2.0 Network Adapter Driver Disk]
   flq:                         SourcePath - [X:\WINDOWS\System32\DriverStore\FileRepository\netrtuw.inf_x86_neutral_1116baaf4ebbe2a4]
   flq:                         SourceFile - [RTL8187.sys]
   flq:                         Flags       - 0x00000400
   flq:                   {SPFQNOTIFY_NEEDMEDIA}
   flq:                         {SPFILENOTIFY_NEEDMEDIA}
   flq:                         {SPFILENOTIFY_NEEDMEDIA - exit(0x00000001)}
   flq:                   {SPFQNOTIFY_NEEDMEDIA - returned 0x00000001}
   flq:                   source media: SPFQOPERATION_DOIT
   flq:                   {_commit_copyfile}
   flq:                         {SPFILENOTIFY_STARTCOPY}
   ndv:                            Saving LastKnownGood file X:\WINDOWS\system32\DRIVERS\RTL8187.sys (copy)
   flq:                         {SPFILENOTIFY_STARTCOPY - exit(0x00000001)}
   flq:                         CopyFile: 'X:\WINDOWS\System32\DriverStore\FileRepository\netrtuw.inf_x86_neutral_1116baaf4ebbe2a4\RTL8187.sys'
   flq:                               to: 'X:\WINDOWS\system32\DRIVERS\SETCEDA.tmp'
   cpy:                         CopyFile Drp is active
   cpy:                         Source File 'X:\WINDOWS\system32\DRIVERS\SETCEDA.tmp' is NOT signed NT5 Crypto.
   cpy:                         DrpGetFileProt Status=2 dwClass=0
   flq:                         MoveFile: 'X:\WINDOWS\system32\DRIVERS\SETCEDA.tmp'
   flq:                               to: 'X:\WINDOWS\system32\DRIVERS\RTL8187.sys'
   cpy:                         DrpSetRegFileProt 'X:\WINDOWS\system32\DRIVERS\RTL8187.sys' Status=0 Class=OEM Legacy
   flq:                         Caller applied security to file 'X:\WINDOWS\system32\DRIVERS\RTL8187.sys'.
   flq:                         {SPFILENOTIFY_ENDCOPY}
   flq:                         {SPFILENOTIFY_ENDCOPY - exit(0x00000001)}
   flq:                   {_commit_copyfile exit OK}
   flq:                   {SPFILENOTIFY_ENDSUBQUEUE}
   flq:                   {SPFILENOTIFY_ENDSUBQUEUE - exit(0x00000001)}
   flq:             {_commit_copy_subqueue exit OK}
   flq:             {SPFILENOTIFY_ENDQUEUE}
   flq:             {SPFILENOTIFY_ENDQUEUE - exit(0x00000001)}
   flq:          {_commit_file_queue exit OK}
   ndv:          Registering CoInstallers...
   dvi:          {DIF_REGISTER_COINSTALLERS} 23:30:22.968
   dvi:             CoInstaller 1: Enter 23:30:22.968
   dvi:             CoInstaller 1: Exit
   dvi:             CoInstaller 2: Enter 23:30:22.968
   dvi:             CoInstaller 2: Exit
   dvi:             CoInstaller 3: Enter 23:30:22.968
   dvi:             CoInstaller 3: Exit
   dvi:             Class installer: Enter 23:30:22.968
   dvi:             Class installer: Exit
   dvi:             Default installer: Enter 23:30:22.968
   inf:                   Opened INF: 'x:\windows\system32\driverstore\filerepository\netrtuw.inf_x86_neutral_1116baaf4ebbe2a4\netrtuw.inf' ([strings])
   inf:                   {Install Inf Section [RTL8187.ndi.NT.CoInstallers]}
   inf:                   {Install Inf Section [RTL8187.ndi.NT.CoInstallers] exit (0x00000000)}
   dvi:                   {DIF_DESTROYPRIVATEDATA} 23:30:22.968
   dvi:                         CoInstaller 1: Enter 23:30:22.968
   dvi:                         CoInstaller 1: Exit
   dvi:                         CoInstaller 2: Enter 23:30:22.968
   dvi:                         CoInstaller 2: Exit
   dvi:                         CoInstaller 3: Enter 23:30:22.968
   dvi:                         CoInstaller 3: Exit
   dvi:                         Class installer: Enter 23:30:22.984
   dvi:                         Class installer: Exit
   dvi:                   {DIF_DESTROYPRIVATEDATA - exit(0x00000000)} 23:30:22.984
   dvi:                   Co-installers registered.
   dvi:             Default installer: Exit
   dvi:          {DIF_REGISTER_COINSTALLERS - exit(0x00000000)} 23:30:22.984
   ndv:          Installing interfaces...
   dvi:          {DIF_INSTALLINTERFACES} 23:30:22.984
   dvi:             Using exported function 'NciDeviceInstall' in module 'X:\WINDOWS\system32\nci.dll'.
   dvi:             CoInstaller 1 == nci.dll,NciDeviceInstall
   dvi:             Using exported function 'WlanDeviceClassCoInstaller' in module 'X:\WINDOWS\system32\wlaninst.dll'.
   dvi:             CoInstaller 2 == wlaninst.dll,WlanDeviceClassCoInstaller
   dvi:             Using exported function 'WwanDeviceClassCoInstaller' in module 'X:\WINDOWS\system32\wwaninst.dll'.
   dvi:             CoInstaller 3 == wwaninst.dll,WwanDeviceClassCoInstaller
   dvi:             CoInstaller 1: Enter 23:30:22.984
   dvi:             CoInstaller 1: Exit
   dvi:             CoInstaller 2: Enter 23:30:22.984
   dvi:             CoInstaller 2: Exit
   dvi:             CoInstaller 3: Enter 23:30:22.984
   dvi:             CoInstaller 3: Exit
   dvi:             Class installer: Enter 23:30:22.984
   dvi:             Class installer: Exit
   dvi:             Default installer: Enter 23:30:22.984
   dvi:                   {Install INTERFACES}
   inf:                         Opened INF: 'x:\windows\system32\driverstore\filerepository\netrtuw.inf_x86_neutral_1116baaf4ebbe2a4\netrtuw.inf' ([strings])
   dvi:                         Installing section [RTL8187.ndi.NT.Interfaces]
   dvi:                   {Install INTERFACES exit 00000000}
   dvi:             Default installer: Exit
   dvi:          {DIF_INSTALLINTERFACES - exit(0x00000000)} 23:30:22.984
   ndv:          Installing device...
   dvi:          {DIF_INSTALLDEVICE} 23:30:22.984
   dvi:             CoInstaller 1: Enter 23:30:22.984
   cci:                   [NdisCoinst: Enter NcipHandleInstallPreProcessing]
   cci:                   NdisCoinst: NetCfgInstanceId does not exist
   cci:                   NdisCoinst: Guid of the adapter is {207504ED-00BC-4825-9873-44356EAFAB6B}
   inf:                   Opened INF: 'X:\WINDOWS\INF\oem2.inf' ([strings])
   cci:                   NdisCoinst: IfType from registry is 71
   cci:                   NdisCoinst: IfType 71, Characteristics 0x84, IsIrdaDevice 0, PhysicalMediaType 9, MediaType 16, IsBridge 0, FoundGuidInDownlevel 0, EnableDhcp 2
   cci:                   NdisCoinst: Connection name is 无线网络连接
   cci:                   NdisCoinst: NetLuidIndex does not exist
   cci:                   NdisCoinst: Allocated NetLuidIndex is 0
   cci:                   [NdisCoinst: Exit NcipHandleInstallPreProcessing]
   dvi:             CoInstaller 1: Exit
   dvi:             CoInstaller 2: Enter 23:30:23.000
   inf:                   Opened INF: 'X:\WINDOWS\INF\oem2.inf' ([strings])
   dvi:             CoInstaller 2: Exit
   dvi:             CoInstaller 3: Enter 23:30:23.000
   inf:                   Opened INF: 'X:\WINDOWS\INF\oem2.inf' ([strings])
   dvi:             CoInstaller 3: Exit
   dvi:             Class installer: Enter 23:30:23.000
   cci:                   [NCI BEGIN INSTALL DEVICE for USB\VID_0BDA&PID_8187\380A0AA13C23]
   inf:                   Opened INF: 'X:\WINDOWS\INF\oem2.inf' ([strings])
   cci:                   NCI: NewDeviceInstall is 1, assume new install
   inf:                   AddReg=RTL8187.common.reg,RTLWLAN.reg,RTL8187_os61.reg  (oem2.inf line 62)
   cci:                   NCI: Fresh install of device. DI_DONOTCALLCONFIGMG flag set. Device will be started after bindings
   dvi:                   {Install DEVICE}
   inf:                         Opened INF: 'x:\windows\system32\driverstore\filerepository\netrtuw.inf_x86_neutral_1116baaf4ebbe2a4\netrtuw.inf' ([strings])
   dvi:                         Processing Registry/Property directives...
   inf:                         {Install Inf Section [RTL8187.ndi.NT]}
   inf:                            AddReg=RTL8187.common.reg,RTLWLAN.reg,RTL8187_os61.reg  (netrtuw.inf line 62)
   inf:                         {Install Inf Section [RTL8187.ndi.NT] exit (0x00000000)}
   inf:                         {Install Inf Section [RTL8187.ndi.NT.Hw]}
   inf:                            AddReg=RTL8187_os61.vwifi.reg  (netrtuw.inf line 74)
   inf:                         {Install Inf Section [RTL8187.ndi.NT.Hw] exit (0x00000000)}

下贴继续。。。

zyk02 · 发表于 2012-7-18 00:06:13

接上帖：

dvi:                         {Writing Device Properties}
   dvi:                            Provider name=Realtek Semiconductor Corp.
   dvi:                            DriverDate 12/09/2009
   dvi:                            DriverVersion=6.1316.1209.2009
   dvi:                            Class name=Net
   dvi:                            Manufacturer=Realtek Semiconductor Corp.
   dvi:                            Matching DeviceID=usb\vid_0bda&pid_8187&rev_0100
   dvi:                            Strong Name=oem2.inf:Realtek.NTx86.6.1:RTL8187.ndi:6.1316.1209.2009:usb\vid_0bda&pid_8187&rev_0100
   dvi:                         {Writing Device Properties - Complete}
   inf:                         {Install Inf Section [RTL8187.ndi.NT.Services]}
   inf:                            AddService=RTL8187,2,RTL8187.nt61.Service,RTL8187.nt61.EventLog  (netrtuw.inf line 71)
   inf:                            ServiceType=1  (netrtuw.inf line 86)
   inf:                            StartType=3  (netrtuw.inf line 87)
   inf:                            ErrorControl=1  (netrtuw.inf line 88)
   inf:                            ServiceBinary=X:\WINDOWS\system32\DRIVERS\rtl8187.sys  (netrtuw.inf line 89)
   inf:                            DisplayName="Realtek RTL8187 Wireless 802.11b/g 54Mbps USB 2.0 Network Adapter"  (netrtuw.inf line 85)
   inf:                            LoadOrderGroup=NDIS  (netrtuw.inf line 90)
   dvi:                            Add Service: Created service 'RTL8187'.
   inf:                            AddReg=RTL8187.nt61.AddEventLog.reg  (netrtuw.inf line 93)
   inf:                         {Install Inf Section [RTL8187.ndi.NT.Services] exit(0x00000000)}
   dvi:                         Updated reflected section names for: oem2.inf
   dvi:                   {Install DEVICE exit (0x00000000)}
   dvi:                   Writing common driver property settings.
   dvi:                         DriverDescription=Realtek RTL8187 Wireless 802.11b/g 54Mbps USB 2.0 Network Adapter
   dvi:                         DeviceDisplayName=Realtek RTL8187 Wireless 802.11b/g 54Mbps USB 2.0 Network Adapter
! dvi:                   Device restart was skipped becasuse the DI_DONOTCALLCONFIGMG  flag was set.
   cci:                   NCI: Device installed. Clearing DI_DONOTCALLCONFIGMG flag.
   cci:                   [NCI BEGIN BINDINGS UPDATE for USB\VID_0BDA&PID_8187\380A0AA13C23]
   cci:                   NCI: INetCfg Installer Interface asking for write lock. 23:30:23.046
   cci:                   NCI: INetCfg Installer Interface acquired write lock. 23:30:23.046
   cci:                   NCI: Init Notify Object for ms_msclient
   cci:                   NCI: Init Notify Object for ms_msclient complete
   cci:                   NCI: Init Notify Object for ms_tcpip
   cci:                   NCI: Init Notify Object for ms_tcpip complete
   cci:                   NCI: Init Notify Object for ms_tcpip6
   cci:                   NCI: Init Notify Object for ms_tcpip6 complete
   cci:                   [NCI BEGIN RC: Install any components required by usb\vid_0bda&pid_8187&rev_0100]
   cci:                   [NCI END RC: Install any components required by usb\vid_0bda&pid_8187&rev_0100. Result 0x00000000]
   cci:                   NCI: pnp id USB\VID_0BDA&PID_8187\380A0AA13C23
   cci:                   [NCI: BEGIN WRITING CONFIG BLOB]
   cci:                   [NCI: END WRITING CONFIG BLOB]
   cci:                   [NCI: BEGIN WRITING CONFIG BLOB]
   cci:                   NCI: Number of components 9
   cci:                   NCI: Number of stack entries 14
   cci:                   NCI: Number of disabled bindpaths 0
   cci:                   NCI: Number of components being referenced 7
   cci:                   NCI: cbBuf - 932, cbBufIn - 932
   cci:                   [NCI: END WRITING CONFIG BLOB]
   cci:                   [NCI BEGIN STATIC BINDINGS]
   cci:                   NCI:
   cci:                   NCI: Writing Network Linkage information for ms_netbios
   cci:                   NCI:    Bind:
   cci:                   NCI:       \Device\NetBT_Tcpip6_{207504ED-00BC-4825-9873-44356EAFAB6B}
   cci:                   NCI:       \Device\NetBT_Tcpip6_{BA43852C-210F-4FC4-AD4C-D8E0B7EAA5B4}
   cci:                   NCI:       \Device\NetBT_Tcpip_{207504ED-00BC-4825-9873-44356EAFAB6B}
   cci:                   NCI:       \Device\NetBT_Tcpip_{BA43852C-210F-4FC4-AD4C-D8E0B7EAA5B4}
   cci:                   NCI:    Export:
   cci:                   NCI:       \Device\NetBIOS_NetBT_Tcpip6_{207504ED-00BC-4825-9873-44356EAFAB6B}
   cci:                   NCI:       \Device\NetBIOS_NetBT_Tcpip6_{BA43852C-210F-4FC4-AD4C-D8E0B7EAA5B4}
   cci:                   NCI:       \Device\NetBIOS_NetBT_Tcpip_{207504ED-00BC-4825-9873-44356EAFAB6B}
   cci:                   NCI:       \Device\NetBIOS_NetBT_Tcpip_{BA43852C-210F-4FC4-AD4C-D8E0B7EAA5B4}
   cci:
   cci:                   NCI: Calling NdisHandlePnPEvent [TDI, RECONFIGURE] with
   cci:                   NCI: NetBIOS \Device\NetBT_Tcpip6_{207504ED-00BC-4825-9873-44356EAFAB6B}
   cci:                   NCI: NdisHandlePnPEvent result 0x00000001

   cci:                   NCI:
   cci:                   NCI: Writing Network Linkage information for ms_msclient
   cci:                   NCI:    Bind:
   cci:                   NCI:       \Device\Smb_Tcpip6_{207504ED-00BC-4825-9873-44356EAFAB6B}
   cci:                   NCI:       \Device\Smb_Tcpip6_{BA43852C-210F-4FC4-AD4C-D8E0B7EAA5B4}
   cci:                   NCI:       \Device\Smb_Tcpip_{207504ED-00BC-4825-9873-44356EAFAB6B}
   cci:                   NCI:       \Device\Smb_Tcpip_{BA43852C-210F-4FC4-AD4C-D8E0B7EAA5B4}
   cci:                   NCI:       \Device\NetbiosSmb
   cci:                   NCI:       \Device\Tcpip_{207504ED-00BC-4825-9873-44356EAFAB6B}
   cci:                   NCI:       \Device\Tcpip_{BA43852C-210F-4FC4-AD4C-D8E0B7EAA5B4}
   cci:                   NCI:       \Device\Tcpip6_{207504ED-00BC-4825-9873-44356EAFAB6B}
   cci:                   NCI:       \Device\Tcpip6_{BA43852C-210F-4FC4-AD4C-D8E0B7EAA5B4}
   cci:                   NCI:       \Device\NetBT_Tcpip6_{207504ED-00BC-4825-9873-44356EAFAB6B}
   cci:                   NCI:       \Device\NetBT_Tcpip6_{BA43852C-210F-4FC4-AD4C-D8E0B7EAA5B4}
   cci:                   NCI:       \Device\NetBT_Tcpip_{207504ED-00BC-4825-9873-44356EAFAB6B}
   cci:                   NCI:       \Device\NetBT_Tcpip_{BA43852C-210F-4FC4-AD4C-D8E0B7EAA5B4}
   cci:                   NCI:    Export:
   cci:                   NCI:       \Device\LanmanWorkstation_Smb_Tcpip6_{207504ED-00BC-4825-9873-44356EAFAB6B}
   cci:                   NCI:       \Device\LanmanWorkstation_Smb_Tcpip6_{BA43852C-210F-4FC4-AD4C-D8E0B7EAA5B4}
   cci:                   NCI:       \Device\LanmanWorkstation_Smb_Tcpip_{207504ED-00BC-4825-9873-44356EAFAB6B}
   cci:                   NCI:       \Device\LanmanWorkstation_Smb_Tcpip_{BA43852C-210F-4FC4-AD4C-D8E0B7EAA5B4}
   cci:                   NCI:       \Device\LanmanWorkstation_NetbiosSmb
   cci:                   NCI:       \Device\LanmanWorkstation_Tcpip_{207504ED-00BC-4825-9873-44356EAFAB6B}
   cci:                   NCI:       \Device\LanmanWorkstation_Tcpip_{BA43852C-210F-4FC4-AD4C-D8E0B7EAA5B4}
   cci:                   NCI:       \Device\LanmanWorkstation_Tcpip6_{207504ED-00BC-4825-9873-44356EAFAB6B}
   cci:                   NCI:       \Device\LanmanWorkstation_Tcpip6_{BA43852C-210F-4FC4-AD4C-D8E0B7EAA5B4}
   cci:                   NCI:       \Device\LanmanWorkstation_NetBT_Tcpip6_{207504ED-00BC-4825-9873-44356EAFAB6B}
   cci:                   NCI:       \Device\LanmanWorkstation_NetBT_Tcpip6_{BA43852C-210F-4FC4-AD4C-D8E0B7EAA5B4}
   cci:                   NCI:       \Device\LanmanWorkstation_NetBT_Tcpip_{207504ED-00BC-4825-9873-44356EAFAB6B}
   cci:                   NCI:       \Device\LanmanWorkstation_NetBT_Tcpip_{BA43852C-210F-4FC4-AD4C-D8E0B7EAA5B4}
   cci:
   cci:                   NCI: Calling NdisHandlePnPEvent [TDI, RECONFIGURE] with
   cci:                   NCI: LanmanWorkstation \Device\Smb_Tcpip6_{207504ED-00BC-4825-9873-44356EAFAB6B}
   cci:                   NCI: NdisHandlePnPEvent result 0x00000001

   cci:                   NCI:
   cci:                   NCI: Writing Network Linkage information for ms_tcpip6
   cci:                   NCI:    Bind:
   cci:                   NCI:       \Device\{207504ED-00BC-4825-9873-44356EAFAB6B}
   cci:                   NCI:       \Device\{BA43852C-210F-4FC4-AD4C-D8E0B7EAA5B4}
   cci:                   NCI:    Export:
   cci:                   NCI:       \Device\Tcpip6_{207504ED-00BC-4825-9873-44356EAFAB6B}
   cci:                   NCI:       \Device\Tcpip6_{BA43852C-210F-4FC4-AD4C-D8E0B7EAA5B4}
   cci:
   cci:                   NCI: Calling NdisHandlePnPEvent [TDI, RECONFIGURE] with
   cci:                   NCI: Tcpip6 \Device\{207504ED-00BC-4825-9873-44356EAFAB6B}
   cci:                   NCI: NdisHandlePnPEvent result 0x00000001

   cci:                   NCI:
   cci:                   NCI: Writing Network Linkage information for ms_smb
   cci:                   NCI:    Bind:
   cci:                   NCI:       \Device\Tcpip6_{207504ED-00BC-4825-9873-44356EAFAB6B}
   cci:                   NCI:       \Device\Tcpip6_{BA43852C-210F-4FC4-AD4C-D8E0B7EAA5B4}
   cci:                   NCI:       \Device\Tcpip_{207504ED-00BC-4825-9873-44356EAFAB6B}
   cci:                   NCI:       \Device\Tcpip_{BA43852C-210F-4FC4-AD4C-D8E0B7EAA5B4}
   cci:                   NCI:    Export:
   cci:                   NCI:       \Device\Smb_Tcpip6_{207504ED-00BC-4825-9873-44356EAFAB6B}
   cci:                   NCI:       \Device\Smb_Tcpip6_{BA43852C-210F-4FC4-AD4C-D8E0B7EAA5B4}
   cci:                   NCI:       \Device\Smb_Tcpip_{207504ED-00BC-4825-9873-44356EAFAB6B}
   cci:                   NCI:       \Device\Smb_Tcpip_{BA43852C-210F-4FC4-AD4C-D8E0B7EAA5B4}
   cci:
   cci:                   NCI: Calling NdisHandlePnPEvent [TDI, RECONFIGURE] with
   cci:                   NCI: Smb \Device\Tcpip6_{207504ED-00BC-4825-9873-44356EAFAB6B}
   cci:                   NCI: NdisHandlePnPEvent result 0x00000001

   cci:                   NCI:
   cci:                   NCI: Writing Network Linkage information for ms_netbt
   cci:                   NCI:    Bind:
   cci:                   NCI:       \Device\Tcpip6_{207504ED-00BC-4825-9873-44356EAFAB6B}
   cci:                   NCI:       \Device\Tcpip6_{BA43852C-210F-4FC4-AD4C-D8E0B7EAA5B4}
   cci:                   NCI:       \Device\Tcpip_{207504ED-00BC-4825-9873-44356EAFAB6B}
   cci:                   NCI:       \Device\Tcpip_{BA43852C-210F-4FC4-AD4C-D8E0B7EAA5B4}
   cci:                   NCI:    Export:
   cci:                   NCI:       \Device\NetBT_Tcpip6_{207504ED-00BC-4825-9873-44356EAFAB6B}
   cci:                   NCI:       \Device\NetBT_Tcpip6_{BA43852C-210F-4FC4-AD4C-D8E0B7EAA5B4}
   cci:                   NCI:       \Device\NetBT_Tcpip_{207504ED-00BC-4825-9873-44356EAFAB6B}
   cci:                   NCI:       \Device\NetBT_Tcpip_{BA43852C-210F-4FC4-AD4C-D8E0B7EAA5B4}
   cci:
   cci:                   NCI: Calling NdisHandlePnPEvent [TDI, RECONFIGURE] with
   cci:                   NCI: NetBT \Device\Tcpip6_{207504ED-00BC-4825-9873-44356EAFAB6B}
   cci:                   NCI: NdisHandlePnPEvent result 0x00000001

   cci:                   NCI:
   cci:                   NCI: Writing Network Linkage information for ms_tcpip
   cci:                   NCI:    Bind:
   cci:                   NCI:       \Device\{207504ED-00BC-4825-9873-44356EAFAB6B}
   cci:                   NCI:       \Device\{BA43852C-210F-4FC4-AD4C-D8E0B7EAA5B4}
   cci:                   NCI:    Export:
   cci:                   NCI:       \Device\Tcpip_{207504ED-00BC-4825-9873-44356EAFAB6B}
   cci:                   NCI:       \Device\Tcpip_{BA43852C-210F-4FC4-AD4C-D8E0B7EAA5B4}
   cci:
   cci:                   NCI: Calling NdisHandlePnPEvent [TDI, RECONFIGURE] with
   cci:                   NCI: Tcpip \Device\{207504ED-00BC-4825-9873-44356EAFAB6B}
   cci:                   NCI: NdisHandlePnPEvent result 0x00000001

   cci:                   NCI:
   cci:                   NCI: Writing Network Linkage information for USB\VID_0BDA&PID_8187\380A0AA13C23
   cci:                   NCI:    UpperBind:
   cci:                   NCI:       Tcpip6
   cci:                   NCI:       Tcpip
   cci:                   NCI:    Export:
   cci:                   NCI:       \Device\{207504ED-00BC-4825-9873-44356EAFAB6B}
   cci:
   cci:                   NCI: Calling NdisHandlePnPEvent [NDIS, BIND_LIST] with
   cci:                   NCI: {207504ED-00BC-4825-9873-44356EAFAB6B} Tcpip6
   cci:                   NCI: NdisHandlePnPEvent result 0x00000000

   cci:                   [NCI END STATIC BINDINGS]
   cci:                   [NCI BEGIN NOTIFY APPLY REGISTRY CHANGES]
   cci:                   NCI: Calling ms_msclient ApplyRegistryChanges
   cci:                   NCI: Calling ms_tcpip6 ApplyRegistryChanges
   cci:                   NCI: Calling ms_tcpip ApplyRegistryChanges
   cci:                   [NCI END NOTIFY APPLY REGISTRY CHANGES]
   cci:                   [NCI BEGIN UNBIND DELETED BINDINGS]
   cci:                   [NCI END UNBIND DELETED BINDINGS] Reboot = 0
   cci:                   [NCI BEGIN STOP SERVICES]
   cci:                   [NCI END STOP SERVICES]
   cci:                   [NCI BEGIN UNINSTALL COMPONENTS]
   cci:                   [NCI END UNINSTALL COMPONENTS]
   cci:                   [NCI BEGIN START SERVICES]
   cci:                   NCI: Starting device USB\VID_0BDA&PID_8187\380A0AA13C23
   cci:                   NCI: SP_DEVINSTALL_PARAMS.Flags 0x01800028. Set result 0x800703ec
   cci:                   NCI: SP_DEVINSTALL_PARAMS.FlagsEx 0x00011000. Set result: 0x00000000
   dvi:                   {Restarting Devices} 23:30:23.109
! dvi:                         Can't find service vwifibus
! dvi:                         Failed to retrieve list of devices using this driver
   dvi:                   {Restarting Devices exit} 23:30:23.109
   cci:                   [NCI END START SERVICES]
   cci:                   [NCI BEGIN BIND ADDED BINDPATHS]
! cci:                   !NCI: Op=BIND, Layer=NDIS, Upper=Tcpip Lower=\Device\{207504ED-00BC-4825-9873-44356EAFAB6B}, Error=00000002
! cci:                   !NCI: Op=BIND, Layer=NDIS, Upper=Tcpip6 Lower=\Device\{207504ED-00BC-4825-9873-44356EAFAB6B}, Error=00000002
   cci:                   [NCI END BIND ADDED BINDPATHS]. Reboot 0
   cci:                   [NCI BEGIN NOTIFY APPLY PNP CHANGES]
   cci:                   NCI: Calling ms_msclient ApplyPnpChanges
   cci:                   NCI: Calling ms_tcpip6 ApplyPnpChanges
   cci:                   NCI: Calling ms_tcpip ApplyPnpChanges
   cci:                   [NCI END NOTIFY APPLY PNP CHANGES]
   cci:                   NCI: INetCfg Installer Interface Released write lock. 23:30:23.109
   cci:

   cci:                   [NCI END BINDINGS UPDATE for USB\VID_0BDA&PID_8187\380A0AA13C23. Result 0x00000000]
   cci:                   [NCI END INSTALL DEVICE for USB\VID_0BDA&PID_8187\380A0AA13C23]
   dvi:             Class installer: Exit
   dvi:             CoInstaller 2: Enter (Post Processing) 23:30:23.109
   cci:                   NCI: WLAN Coinst asking for write lock. 23:30:23.109
   cci:                   NCI: WLAN Coinst acquired write lock. 23:30:23.109
   cci:                   NCI: Init Notify Object for ms_msclient
   cci:                   NCI: Init Notify Object for ms_msclient complete
   cci:                   NCI: Init Notify Object for ms_tcpip
   cci:                   NCI: Init Notify Object for ms_tcpip complete
   cci:                   NCI: Init Notify Object for ms_tcpip6
   cci:                   NCI: Init Notify Object for ms_tcpip6 complete
   cci:                   [NCI BEGIN CI: Installing ms_vwifi]
   dvi:                   {Build Driver List} 23:30:23.140
   dvi:                         Searching for hardware ID(s):
   dvi:                            ms_vwifi
   cpy:                         Policy is set to make all digital signatures equal.
   dvi:                         Enumerating INFs from path list 'X:\WINDOWS\inf'
! inf:                         Detected INFCACHE inconsistency
! inf:                         Attempting INFCACHE repair 23:30:23.140
! inf:                         Verify/Fix on INFCACHE complete, status(4) - Fixed 23:30:23.390
   inf:                         Searched 0 potential matches in published INF directory
   dvi:                         Created Driver Node:
   dvi:                            HardwareID - ms_vwifi
   dvi:                            InfName    - X:\WINDOWS\inf\netvwififlt.inf
   dvi:                            DevDesc    - Virtual WiFi Filter Driver
   dvi:                            DrvDesc    - Virtual WiFi Filter Driver
   dvi:                            Provider    - Microsoft
   dvi:                            Mfg       - Microsoft
   dvi:                            ModelsSec - MSFT.NTx86
   dvi:                            InstallSec - Install
   dvi:                            ActualSec - Install
   dvi:                            Rank       - 0xf0ff0000
   dvi:                            Signer    -
   dvi:                            Signer Score - Not digitally signed
   dvi:                            DrvDate    - 06/21/2006
   dvi:                            Version    - 6.1.7600.16385
   inf:                         Searched 25 INFs in directory: 'X:\WINDOWS\inf'
   dvi:                   {Build Driver List - exit(0x00000000)} 23:30:23.453
   dvi:                   {Select Best Driver}
   dvi:                         Selected driver installs from section [Install] in 'x:\windows\inf\netvwififlt.inf'.
   dvi:                         Class GUID of device remains: {4d36e974-e325-11ce-bfc1-08002be10318}.
   dvi:                         Set selected driver complete.
   dvi:                         Selected:
   dvi:                            Description - [Virtual WiFi Filter Driver]
   dvi:                            InfFile    - [x:\windows\inf\netvwififlt.inf]
   dvi:                            Section    - [Install]
   dvi:                            Signer    - []
   dvi:                            Rank       - [0xf0ff0000]
   dvi:                   {Select Best Driver - exit(0x00000000)}
   inf:                   Opened INF: 'x:\windows\inf\netvwififlt.inf' ([strings])
   inf:                   Opened INF: 'x:\windows\inf\netvwififlt.inf' ([strings])
   cci:                   NCI: This is a fresh install.
   inf:                   Copyfiles=ndislwf.copyfiles.sys  (netvwififlt.inf line 32)
! inf:                   Empty Section! [ndislwf.copyfiles.sys]
   dvi:                   {_SCAN_FILE_QUEUE}
   flq:                         ScanQ flags=22
   flq:                            SPQ_SCAN_FILE_VALIDITY
   flq:                            SPQ_SCAN_PRUNE_COPY_QUEUE
   flq:                         ScanQ number of copy nodes=0
   flq:                         ScanQ action=2 DoPruning=32
   flq:                         ScanQ end Validity flags=22 CopyNodes=0
   dvi:                   {_SCAN_FILE_QUEUE exit(0, 0x00000000)}
   inf:                   AddReg=Inst_Ndi  (netvwififlt.inf line 29)
   inf:                   {Install Inf Section [Install.Services]}
   inf:                         AddService=vwififlt,,vwififlt_Service_Inst  (netvwififlt.inf line 66)
   inf:                         ServiceType=1  (netvwififlt.inf line 70)
   inf:                         StartType=1  (netvwififlt.inf line 71)
   inf:                         ErrorControl=1  (netvwififlt.inf line 72)
   inf:                         ServiceBinary=X:\WINDOWS\system32\DRIVERS\vwififlt.sys  (netvwififlt.inf line 73)
   inf:                         DisplayName="Virtual WiFi Filter Driver"  (netvwififlt.inf line 69)
   inf:                         LoadOrderGroup=NDIS  (netvwififlt.inf line 74)
   inf:                         Description="Virtual WiFi Filter Driver"  (netvwififlt.inf line 75)
   dvi:                         Add Service: Created service 'vwififlt'.
   inf:                   {Install Inf Section [Install.Services] exit(0x00000000)}
   cci:                   [NCI END CI: Installing ms_vwifi. Result: 0x00000000]
   cci:                   [NCI BEGIN RC: Install any components required by ms_vwifi]
   cci:                   [NCI END RC: Install any components required by ms_vwifi. Result 0x00000000]
   cci:                   [NCI BEGIN NO: Notifying ms_msclient about ms_vwifi. Change flags: 0x00080001]
   cci:                   [NCI END NO: Notifying ms_msclient about ms_vwifi. Change flags: 0x00080001]
   cci:                   [NCI: BEGIN WRITING CONFIG BLOB]
   cci:                   [NCI: END WRITING CONFIG BLOB]
   cci:                   [NCI: BEGIN WRITING CONFIG BLOB]
   cci:                   NCI: Number of components 10
   cci:                   NCI: Number of stack entries 15
   cci:                   NCI: Number of disabled bindpaths 0
   cci:                   NCI: Number of components being referenced 8
   cci:                   NCI: cbBuf - 1000, cbBufIn - 1000
   cci:                   [NCI: END WRITING CONFIG BLOB]
   cci:                   [NCI BEGIN STATIC BINDINGS]
   cci:                   NCI:
   cci:                   NCI: Writing Network Linkage information for USB\VID_0BDA&PID_8187\380A0AA13C23
   cci:                   NCI:    UpperBind:
   cci:                   NCI:       Tcpip6
   cci:                   NCI:       Tcpip
   cci:                   NCI:    Export:
   cci:                   NCI:       \Device\{207504ED-00BC-4825-9873-44356EAFAB6B}
   cci:
   cci:                   NCI: Calling NdisHandlePnPEvent [NDIS, BIND_LIST] with
   cci:                   NCI: {207504ED-00BC-4825-9873-44356EAFAB6B} Tcpip6
   cci:                   NCI: NdisHandlePnPEvent result 0x00000000

   cci:                   [NCI END STATIC BINDINGS]
   cci:                   [NCI BEGIN NOTIFY APPLY REGISTRY CHANGES]
   cci:                   [NCI END NOTIFY APPLY REGISTRY CHANGES]
   cci:                   [NCI BEGIN UNBIND DELETED BINDINGS]
   cci:                   [NCI END UNBIND DELETED BINDINGS] Reboot = 0
   cci:                   [NCI BEGIN STOP SERVICES]
   cci:                   [NCI END STOP SERVICES]
   cci:                   [NCI BEGIN UNINSTALL COMPONENTS]
   cci:                   [NCI END UNINSTALL COMPONENTS]
   cci:                   [NCI BEGIN START SERVICES]
   cci:                   NCI: Starting the following services:
   cci:                   NCI: vwififlt
   cci:                   [NCI END START SERVICES]
   cci:                   [NCI BEGIN BIND ADDED BINDPATHS]
! cci:                   !NCI: Op=ATTACH, Layer=NDIS, Upper={5CBF81BF-5055-47CD-9055-A76B2B4E3698} Lower=\Device\{207504ED-00BC-4825-9873-44356EAFAB6B}, Error=00000002
   cci:                   [NCI END BIND ADDED BINDPATHS]. Reboot 0
   cci:                   [NCI BEGIN NOTIFY APPLY PNP CHANGES]
   cci:                   [NCI END NOTIFY APPLY PNP CHANGES]
   cci:                   NCI: WLAN Coinst Released write lock. 23:30:23.484
   cci:

   dvi:             CoInstaller 2: Exit (Post Processing)
   dvi:             CoInstaller 1: Enter (Post Processing) 23:30:23.484
   cci:                   [NdisCoinst: Enter NcipUpdateIfDescr]
   cci:                   NdisCoinst: IfType 71, NetLuidIndex 0, IfDescr Realtek RTL8187 Wireless 802.11b/g 54Mbps USB 2.0 Network Adapter
   cci:                   [NdisCoinst: Exit NcipUpdateIfDescr]
   cci:                   [NdisCoinst: Enter NcipSetiScsiFlags]
   cci:                   NdisCoinst: Succefully set the BootFlags
   cci:                   [NdisCoinst: Exit NcipSetiScsiFlags]
   dvi:             CoInstaller 1: Exit (Post Processing)
   dvi:          {DIF_INSTALLDEVICE - exit(0x00000000)} 23:30:23.500
   dvi:          {DIF_NEWDEVICEWIZARD_FINISHINSTALL} 23:30:23.500
   dvi:             CoInstaller 1: Enter 23:30:23.500
   dvi:             CoInstaller 1: Exit
   dvi:             CoInstaller 2: Enter 23:30:23.500
   dvi:             CoInstaller 2: Exit
   dvi:             CoInstaller 3: Enter 23:30:23.500
   dvi:             CoInstaller 3: Exit
   dvi:             Class installer: Enter 23:30:23.500
   dvi:             Class installer: Exit
   dvi:          {DIF_NEWDEVICEWIZARD_FINISHINSTALL - exit(0x00000000)} 23:30:23.500
   ndv:          Device install status=0x00000000
   ndv:          Performing device install final cleanup...
   ndv:    {Core Device Install - exit(0x00000000)} 23:30:23.500
   dvi:    {DIF_DESTROYPRIVATEDATA} 23:30:23.500
   dvi:          CoInstaller 1: Enter 23:30:23.500
   dvi:          CoInstaller 1: Exit
   dvi:          CoInstaller 2: Enter 23:30:23.500
   dvi:          CoInstaller 2: Exit
   dvi:          CoInstaller 3: Enter 23:30:23.500
   dvi:          CoInstaller 3: Exit
   dvi:          Class installer: Enter 23:30:23.500
   dvi:          Class installer: Exit
   dvi:    {DIF_DESTROYPRIVATEDATA - exit(0x00000000)} 23:30:23.500
   ump:    Server install process exited with code 0x00000000 23:30:23.500
   ump: {Plug and Play Service: Device Install exit(00000000)}
   dvi: {Build Driver List} 23:30:23.500
! dvi:    Driver list already built
   dvi: {Build Driver List - exit(0x00000000)} 23:30:23.500
   dvi: {DIF_SELECTBESTCOMPATDRV} 23:30:23.500
   dvi:    Using exported function 'NetClassInstaller' in module 'X:\WINDOWS\system32\NetCfgx.dll'.
   dvi:    Class installer == NetCfgx.dll,NetClassInstaller
   dvi:    Using exported function 'NciDeviceInstall' in module 'X:\WINDOWS\system32\nci.dll'.
   dvi:    CoInstaller 1 == nci.dll,NciDeviceInstall
   dvi:    Using exported function 'WlanDeviceClassCoInstaller' in module 'X:\WINDOWS\system32\wlaninst.dll'.
   dvi:    CoInstaller 2 == wlaninst.dll,WlanDeviceClassCoInstaller
   dvi:    Using exported function 'WwanDeviceClassCoInstaller' in module 'X:\WINDOWS\system32\wwaninst.dll'.
   dvi:    CoInstaller 3 == wwaninst.dll,WwanDeviceClassCoInstaller
   dvi:    CoInstaller 1: Enter 23:30:23.500
   dvi:    CoInstaller 1: Exit
   dvi:    CoInstaller 2: Enter 23:30:23.500
   dvi:    CoInstaller 2: Exit
   dvi:    CoInstaller 3: Enter 23:30:23.500
   dvi:    CoInstaller 3: Exit
   dvi:    Class installer: Enter 23:30:23.500
   dvi:    Class installer: Exit
   dvi:    Default installer: Enter 23:30:23.500
   dvi:          {Select Best Driver}
   dvi:             Selected driver installs from section [RTL8187.ndi] in 'e:\win7x86\netrtuw.inf'.
   dvi:             Class GUID of device remains: {4d36e972-e325-11ce-bfc1-08002be10318}.
   dvi:             Set selected driver complete.
   dvi:             Selected:
   dvi:                   Description - [Realtek RTL8187 Wireless 802.11b/g 54Mbps USB 2.0 Network Adapter]
   dvi:                   InfFile    - [e:\win7x86\netrtuw.inf]
   dvi:                   Section    - [RTL8187.ndi]
   dvi:                   Signer    - []
   dvi:                   Rank       - [0xf0ff0000]
   dvi:          {Select Best Driver - exit(0x00000000)}
   dvi:    Default installer: Exit
   dvi: {DIF_SELECTBESTCOMPATDRV - exit(0x00000000)} 23:30:23.500
   dvi: {DIF_NEWDEVICEWIZARD_FINISHINSTALL} 23:30:23.500
   dvi:    CoInstaller 1: Enter 23:30:23.500
   dvi:    CoInstaller 1: Exit
   dvi:    CoInstaller 2: Enter 23:30:23.500
   dvi:    CoInstaller 2: Exit
   dvi:    CoInstaller 3: Enter 23:30:23.515
   dvi:    CoInstaller 3: Exit
   dvi:    Class installer: Enter 23:30:23.515
   dvi:    Class installer: Exit
   dvi: {DIF_NEWDEVICEWIZARD_FINISHINSTALL - exit(0x00000000)} 23:30:23.515
   dvi: {DIF_DESTROYPRIVATEDATA} 23:30:23.515
   dvi:    CoInstaller 1: Enter 23:30:23.515
   dvi:    CoInstaller 1: Exit
   dvi:    CoInstaller 2: Enter 23:30:23.515
   dvi:    CoInstaller 2: Exit
   dvi:    CoInstaller 3: Enter 23:30:23.515
   dvi:    CoInstaller 3: Exit
   dvi:    Class installer: Enter 23:30:23.531
   dvi:    Class installer: Exit
   dvi: {DIF_DESTROYPRIVATEDATA - exit(0x00000000)} 23:30:23.531
<<<  Section end 2012/07/17 23:30:23.531
<<<  [Exit status: SUCCESS]

>>>  [Device Install (DiInstallDevice) - USB\VID_0BDA&PID_8187\380A0AA13C23]
>>>  Section start 2012/07/17 23:32:03.187
   cmd: "E:\WIN7驱动\PENetwork.exe"
   dvi: Selected driver installs from section [RTL8187.ndi] in 'x:\windows\inf\oem2.inf'.
   dvi: Class GUID of device remains: {4d36e972-e325-11ce-bfc1-08002be10318}.
   dvi: Set selected driver complete.
   inf: {SetupCopyOEMInf: X:\WINDOWS\INF\oem2.inf} 23:32:03.203
   inf:    Driver Store location: X:\WINDOWS\System32\DriverStore\FileRepository\netrtuw.inf_x86_neutral_1116baaf4ebbe2a4\netrtuw.inf
   inf:    Published Inf Path: X:\WINDOWS\INF\oem2.inf
   inf:    Opened PNF: 'X:\WINDOWS\INF\oem2.inf' ([strings])
   inf:    Installing catalog netrtuw.cat as: oem2.CAT
   inf:    OEM source media location: X:\WINDOWS\INF\
   inf: {SetupCopyOEMInf exit (0x00000000)} 23:32:03.203
   dvi: Searching for hardware ID(s):
   dvi:    usb\vid_0bda&pid_8187&rev_0100
   dvi:    usb\vid_0bda&pid_8187
   dvi: Searching for compatible ID(s):
   dvi:    usb\class_00&subclass_00&prot_00
   dvi:    usb\class_00&subclass_00
   dvi:    usb\class_00
   inf: Opened INF: 'X:\WINDOWS\System32\DriverStore\FileRepository\netrtuw.inf_x86_neutral_1116baaf4ebbe2a4\netrtuw.inf' ([strings])
   dvi: Selected driver installs from section [RTL8187.ndi] in 'x:\windows\system32\driverstore\filerepository\netrtuw.inf_x86_neutral_1116baaf4ebbe2a4\netrtuw.inf'.
   dvi: Class GUID of device remains: {4d36e972-e325-11ce-bfc1-08002be10318}.
   dvi: Set selected driver complete.
   dvi: {Plug and Play Service: Device Install for USB\VID_0BDA&PID_8187\380A0AA13C23}
   ump:    Creating Install Process: DrvInst.exe 23:32:03.203
   ndv:    Infpath=X:\WINDOWS\INF\oem2.inf
   ndv:    DriverNodeName=netrtuw.inf:Realtek.NTx86.6.1:RTL8187.ndi:6.1316.1209.2009:usb\vid_0bda&pid_8187&rev_0100
   ndv:    DriverStorepath=X:\WINDOWS\System32\DriverStore\FileRepository\netrtuw.inf_x86_neutral_1116baaf4ebbe2a4\netrtuw.inf
   ndv:    Building driver list from driver node strong name...
   dvi:    Searching for hardware ID(s):
   dvi:          usb\vid_0bda&pid_8187&rev_0100
   dvi:          usb\vid_0bda&pid_8187
   dvi:    Searching for compatible ID(s):
   dvi:          usb\class_00&subclass_00&prot_00
   dvi:          usb\class_00&subclass_00
   dvi:          usb\class_00
   inf:    Opened INF: 'X:\WINDOWS\System32\DriverStore\FileRepository\netrtuw.inf_x86_neutral_1116baaf4ebbe2a4\netrtuw.inf' ([strings])
   dvi:    Selected driver installs from section [RTL8187.ndi] in 'x:\windows\system32\driverstore\filerepository\netrtuw.inf_x86_neutral_1116baaf4ebbe2a4\netrtuw.inf'.
   dvi:    Class GUID of device remains: {4d36e972-e325-11ce-bfc1-08002be10318}.
   dvi:    Set selected driver complete.
   ndv:    {Core Device Install} 23:32:03.234
   inf:          Opened PNF: 'X:\WINDOWS\INF\oem2.inf' ([strings])
   dvi:          {DIF_ALLOW_INSTALL} 23:32:03.265
   dvi:             Using exported function 'NetClassInstaller' in module 'X:\WINDOWS\system32\NetCfgx.dll'.
   dvi:             Class installer == NetCfgx.dll,NetClassInstaller
   dvi:             Using exported function 'NciDeviceInstall' in module 'X:\WINDOWS\system32\nci.dll'.
   dvi:             CoInstaller 1 == nci.dll,NciDeviceInstall
   dvi:             Using exported function 'WlanDeviceClassCoInstaller' in module 'X:\WINDOWS\system32\wlaninst.dll'.
   dvi:             CoInstaller 2 == wlaninst.dll,WlanDeviceClassCoInstaller
   dvi:             Using exported function 'WwanDeviceClassCoInstaller' in module 'X:\WINDOWS\system32\wwaninst.dll'.
   dvi:             CoInstaller 3 == wwaninst.dll,WwanDeviceClassCoInstaller
   dvi:             CoInstaller 1: Enter 23:32:03.265
   dvi:             CoInstaller 1: Exit
   dvi:             CoInstaller 2: Enter 23:32:03.265
   dvi:             CoInstaller 2: Exit
   dvi:             CoInstaller 3: Enter 23:32:03.265
   dvi:             CoInstaller 3: Exit
   dvi:             Class installer: Enter 23:32:03.265

下贴继续。。。。。。。。

zyk02 · 发表于 2012-7-18 00:07:06

接上帖：

   inf:                   Opened PNF: 'X:\WINDOWS\INF\oem2.inf' ([strings])
   inf:                   AddReg=RTL8187.common.reg,RTLWLAN.reg,RTL8187_os61.reg  (oem2.inf line 62)
   dvi:             Class installer: Exit
   dvi:             Default installer: Enter 23:32:03.281
   dvi:             Default installer: Exit
   dvi:          {DIF_ALLOW_INSTALL - exit(0xe000020e)} 23:32:03.281
   ndv:          Installing files...
   dvi:          {DIF_INSTALLDEVICEFILES} 23:32:03.281
   dvi:             CoInstaller 1: Enter 23:32:03.281
   dvi:             CoInstaller 1: Exit
   dvi:             CoInstaller 2: Enter 23:32:03.281
   dvi:             CoInstaller 2: Exit
   dvi:             CoInstaller 3: Enter 23:32:03.281
   dvi:             CoInstaller 3: Exit
   dvi:             Class installer: Enter 23:32:03.281
   dvi:             Class installer: Exit
   dvi:             Default installer: Enter 23:32:03.281
   dvi:                   {Install FILES}
   inf:                         Opened INF: 'x:\windows\system32\driverstore\filerepository\netrtuw.inf_x86_neutral_1116baaf4ebbe2a4\netrtuw.inf' ([strings])
   inf:                         {Install Inf Section [RTL8187.ndi.NT]}
   inf:                            CopyFiles=RTL8187.CopyFiles  (netrtuw.inf line 65)
   cpy:                            Open PnpLockdownPolicy: Err=2. This is OK. Use LockDownPolicyDefault
   flq:                            QueueSingleCopy...
   flq:                            Inf    : 'x:\windows\system32\driverstore\filerepository\netrtuw.inf_x86_neutral_1116baaf4ebbe2a4\netrtuw.inf'
   flq:                            SourceInf: 'x:\windows\system32\driverstore\filerepository\netrtuw.inf_x86_neutral_1116baaf4ebbe2a4\netrtuw.inf'
   flq:                            SourceSection: [sourcedisksfiles]
   flq:                            Source root path based on SourceInf
   flq:                            SourceRootPath: 'X:\WINDOWS\System32\DriverStore\FileRepository\netrtuw.inf_x86_neutral_1116baaf4ebbe2a4'
   flq:                            {FILE_QUEUE_COPY}
   flq:                                  CopyStyle    - 0x00000400
   flq:                                  {FILE_QUEUE_COPY}
   flq:                                        CopyStyle    - 0x00000400
   flq:                                        SourceRootPath - 'X:\WINDOWS\System32\DriverStore\FileRepository\netrtuw.inf_x86_neutral_1116baaf4ebbe2a4'
   flq:                                        SourceFilename - 'RTL8187.sys'
   flq:                                        TargetDirectory- 'X:\WINDOWS\system32\DRIVERS'
   flq:                                        TargetFilename - 'RTL8187.sys'
   flq:                                        SourceDesc    - 'Realtek RTL8187 Wireless 802.11b/g 54Mbps USB 2.0 Network Adapter Driver Disk'
   flq:                                  {FILE_QUEUE_COPY exit(0x00000000)}
   flq:                            {FILE_QUEUE_COPY exit(0x00000000)}
   inf:                         {Install Inf Section [RTL8187.ndi.NT] exit (0x00000000)}
   dvi:                         Processing co-installer registration section [RTL8187.ndi.NT.CoInstallers].
   inf:                         {Install Inf Section [RTL8187.ndi.NT.CoInstallers]}
   inf:                         {Install Inf Section [RTL8187.ndi.NT.CoInstallers] exit (0x00000000)}
   dvi:                         Co-installers registered.
   dvi:                         {Install INTERFACES}
   dvi:                            Installing section [RTL8187.ndi.NT.Interfaces]
   dvi:                         {Install INTERFACES exit 00000000}
   dvi:                   {Install FILES exit (0x00000000)}
   dvi:             Default installer: Exit
   dvi:          {DIF_INSTALLDEVICEFILES - exit(0x00000000)} 23:32:03.296
   ndv:          Pruning file queue...
   dvi:          {_SCAN_FILE_QUEUE}
   flq:             ScanQ flags=620
   flq:                   SPQ_SCAN_PRUNE_COPY_QUEUE
   flq:                   SPQ_SCAN_FILE_COMPARISON
   flq:                   SPQ_SCAN_ACTIVATE_DRP
   flq:             ScanQ number of copy nodes=1
   flq:             File 'X:\WINDOWS\system32\DRIVERS\RTL8187.sys' pruned from copy.
   cpy:             DrpSetRegFileProt 'X:\WINDOWS\system32\DRIVERS\RTL8187.sys' Status=0 Class=OEM Legacy
   flq:             ScanQ action=200 DoPruning=32
   flq:             ScanQ end Validity flags=620 CopyNodes=0
   dvi:          {_SCAN_FILE_QUEUE exit(0, 0x00000000)}
   ndv:          Committing file queue...
   flq:          {_commit_file_queue}
   flq:             CommitQ DelNodes=0 RenNodes=0 CopyNodes=0
   flq:             CommitQ early exit: No nodes are queued
   flq:          {_commit_file_queue exit OK}
   ndv:          Registering CoInstallers...
   dvi:          {DIF_REGISTER_COINSTALLERS} 23:32:03.312
   dvi:             CoInstaller 1: Enter 23:32:03.312
   dvi:             CoInstaller 1: Exit
   dvi:             CoInstaller 2: Enter 23:32:03.312
   dvi:             CoInstaller 2: Exit
   dvi:             CoInstaller 3: Enter 23:32:03.312
   dvi:             CoInstaller 3: Exit
   dvi:             Class installer: Enter 23:32:03.312
   dvi:             Class installer: Exit
   dvi:             Default installer: Enter 23:32:03.312
   inf:                   Opened INF: 'x:\windows\system32\driverstore\filerepository\netrtuw.inf_x86_neutral_1116baaf4ebbe2a4\netrtuw.inf' ([strings])
   inf:                   {Install Inf Section [RTL8187.ndi.NT.CoInstallers]}
   inf:                   {Install Inf Section [RTL8187.ndi.NT.CoInstallers] exit (0x00000000)}
   dvi:                   {DIF_DESTROYPRIVATEDATA} 23:32:03.312
   dvi:                         CoInstaller 1: Enter 23:32:03.312
   dvi:                         CoInstaller 1: Exit
   dvi:                         CoInstaller 2: Enter 23:32:03.312
   dvi:                         CoInstaller 2: Exit
   dvi:                         CoInstaller 3: Enter 23:32:03.312
   dvi:                         CoInstaller 3: Exit
   dvi:                         Class installer: Enter 23:32:03.312
   dvi:                         Class installer: Exit
   dvi:                   {DIF_DESTROYPRIVATEDATA - exit(0x00000000)} 23:32:03.312
   dvi:                   Co-installers registered.
   dvi:             Default installer: Exit
   dvi:          {DIF_REGISTER_COINSTALLERS - exit(0x00000000)} 23:32:03.312
   ndv:          Installing interfaces...
   dvi:          {DIF_INSTALLINTERFACES} 23:32:03.312
   dvi:             Using exported function 'NciDeviceInstall' in module 'X:\WINDOWS\system32\nci.dll'.
   dvi:             CoInstaller 1 == nci.dll,NciDeviceInstall
   dvi:             Using exported function 'WlanDeviceClassCoInstaller' in module 'X:\WINDOWS\system32\wlaninst.dll'.
   dvi:             CoInstaller 2 == wlaninst.dll,WlanDeviceClassCoInstaller
   dvi:             Using exported function 'WwanDeviceClassCoInstaller' in module 'X:\WINDOWS\system32\wwaninst.dll'.
   dvi:             CoInstaller 3 == wwaninst.dll,WwanDeviceClassCoInstaller
   dvi:             CoInstaller 1: Enter 23:32:03.312
   dvi:             CoInstaller 1: Exit
   dvi:             CoInstaller 2: Enter 23:32:03.312
   dvi:             CoInstaller 2: Exit
   dvi:             CoInstaller 3: Enter 23:32:03.312
   dvi:             CoInstaller 3: Exit
   dvi:             Class installer: Enter 23:32:03.312
   dvi:             Class installer: Exit
   dvi:             Default installer: Enter 23:32:03.312
   dvi:                   {Install INTERFACES}
   inf:                         Opened INF: 'x:\windows\system32\driverstore\filerepository\netrtuw.inf_x86_neutral_1116baaf4ebbe2a4\netrtuw.inf' ([strings])
   dvi:                         Installing section [RTL8187.ndi.NT.Interfaces]
   dvi:                   {Install INTERFACES exit 00000000}
   dvi:             Default installer: Exit
   dvi:          {DIF_INSTALLINTERFACES - exit(0x00000000)} 23:32:03.328
   ndv:          Installing device...
   dvi:          {DIF_INSTALLDEVICE} 23:32:03.328
   dvi:             CoInstaller 1: Enter 23:32:03.328
   cci:                   [NdisCoinst: Enter NcipHandleInstallPreProcessing]
   cci:                   NdisCoinst: Guid of the adapter exists and is {207504ED-00BC-4825-9873-44356EAFAB6B}
   inf:                   Opened PNF: 'X:\WINDOWS\INF\oem2.inf' ([strings])
   cci:                   NdisCoinst: IfType from registry is 71
   cci:                   NdisCoinst: IfType 71, Characteristics 0x84, IsIrdaDevice 0, PhysicalMediaType 9, MediaType 16, IsBridge 0, FoundGuidInDownlevel 0, EnableDhcp 2
   cci:                   NdisCoinst: Connection name is 无线网络连接
   cci:                   NdisCoinst: NetLuidIndex exists and is 0
   cci:                   [NdisCoinst: Exit NcipHandleInstallPreProcessing]
   dvi:             CoInstaller 1: Exit
   dvi:             CoInstaller 2: Enter 23:32:03.328
   inf:                   Opened PNF: 'X:\WINDOWS\INF\oem2.inf' ([strings])
   dvi:             CoInstaller 2: Exit
   dvi:             CoInstaller 3: Enter 23:32:03.328
   inf:                   Opened PNF: 'X:\WINDOWS\INF\oem2.inf' ([strings])
   dvi:             CoInstaller 3: Exit
   dvi:             Class installer: Enter 23:32:03.328
   cci:                   [NCI BEGIN INSTALL DEVICE for USB\VID_0BDA&PID_8187\380A0AA13C23]
   inf:                   Opened PNF: 'X:\WINDOWS\INF\oem2.inf' ([strings])
   cci:                   NCI: NewDeviceInstall is 0. Assuming this is an update
   inf:                   AddReg=RTL8187.common.reg,RTLWLAN.reg,RTL8187_os61.reg  (oem2.inf line 62)
   dvi:                   {Install DEVICE}
   inf:                         Opened INF: 'x:\windows\system32\driverstore\filerepository\netrtuw.inf_x86_neutral_1116baaf4ebbe2a4\netrtuw.inf' ([strings])
   dvi:                         Processing Registry/Property directives...
   inf:                         {Install Inf Section [RTL8187.ndi.NT]}
   inf:                            AddReg=RTL8187.common.reg,RTLWLAN.reg,RTL8187_os61.reg  (netrtuw.inf line 62)
   inf:                         {Install Inf Section [RTL8187.ndi.NT] exit (0x00000000)}
   inf:                         {Install Inf Section [RTL8187.ndi.NT.Hw]}
   inf:                            AddReg=RTL8187_os61.vwifi.reg  (netrtuw.inf line 74)
   inf:                         {Install Inf Section [RTL8187.ndi.NT.Hw] exit (0x00000000)}
   dvi:                         {Writing Device Properties}
   dvi:                            Provider name=Realtek Semiconductor Corp.
   dvi:                            DriverDate 12/09/2009
   dvi:                            DriverVersion=6.1316.1209.2009
   dvi:                            Class name=Net
   dvi:                            Manufacturer=Realtek Semiconductor Corp.
   dvi:                            Matching DeviceID=usb\vid_0bda&pid_8187&rev_0100
   dvi:                            Strong Name=oem2.inf:Realtek.NTx86.6.1:RTL8187.ndi:6.1316.1209.2009:usb\vid_0bda&pid_8187&rev_0100
   dvi:                         {Writing Device Properties - Complete}
   inf:                         {Install Inf Section [RTL8187.ndi.NT.Services]}
   inf:                            AddService=RTL8187,2,RTL8187.nt61.Service,RTL8187.nt61.EventLog  (netrtuw.inf line 71)
   inf:                            ServiceType=1  (netrtuw.inf line 86)
   inf:                            StartType=3  (netrtuw.inf line 87)
   inf:                            ErrorControl=1  (netrtuw.inf line 88)
   inf:                            ServiceBinary=X:\WINDOWS\system32\DRIVERS\rtl8187.sys  (netrtuw.inf line 89)
   inf:                            DisplayName="Realtek RTL8187 Wireless 802.11b/g 54Mbps USB 2.0 Network Adapter"  (netrtuw.inf line 85)
   inf:                            LoadOrderGroup=NDIS  (netrtuw.inf line 90)
   dvi:                            Add Service: Modified existing service 'RTL8187'.
   inf:                            AddReg=RTL8187.nt61.AddEventLog.reg  (netrtuw.inf line 93)
   inf:                         {Install Inf Section [RTL8187.ndi.NT.Services] exit(0x00000000)}
   dvi:                         Updated reflected section names for: oem2.inf
   dvi:                   {Install DEVICE exit (0x00000000)}
   dvi:                   Writing common driver property settings.
   dvi:                         DriverDescription=Realtek RTL8187 Wireless 802.11b/g 54Mbps USB 2.0 Network Adapter
   dvi:                         DeviceDisplayName=Realtek RTL8187 Wireless 802.11b/g 54Mbps USB 2.0 Network Adapter
   dvi:                   Install Device: Restarting device. 23:32:03.359
   dvi:                   Install Device: Restarting device completed. 23:32:03.359
!!!  dvi:                   Device not started: Device has problem: 0x13: CM_PROB_REGISTRY.
   cci:                   [NCI BEGIN BINDINGS UPDATE for USB\VID_0BDA&PID_8187\380A0AA13C23]
   cci:                   NCI: INetCfg Installer Interface asking for write lock. 23:32:03.359
   cci:                   NCI: INetCfg Installer Interface acquired write lock. 23:32:03.359
   cci:                   NCI: Init Notify Object for ms_msclient
   cci:                   NCI: Init Notify Object for ms_msclient complete
   cci:                   NCI: Init Notify Object for ms_tcpip
   cci:                   NCI: Init Notify Object for ms_tcpip complete
   cci:                   NCI: Init Notify Object for ms_tcpip6
   cci:                   NCI: Init Notify Object for ms_tcpip6 complete
   cci:                   [NCI: BEGIN WRITING CONFIG BLOB]
   cci:                   [NCI: END WRITING CONFIG BLOB]
   cci:                   [NCI: BEGIN WRITING CONFIG BLOB]
   cci:                   NCI: Number of components 12
   cci:                   NCI: Number of stack entries 18
   cci:                   NCI: Number of disabled bindpaths 0
   cci:                   NCI: Number of components being referenced 10
   cci:                   NCI: cbBuf - 1160, cbBufIn - 1160
   cci:                   [NCI: END WRITING CONFIG BLOB]
   cci:                   [NCI BEGIN STATIC BINDINGS]
   cci:                   [NCI END STATIC BINDINGS]
   cci:                   [NCI BEGIN NOTIFY APPLY REGISTRY CHANGES]
   cci:                   [NCI END NOTIFY APPLY REGISTRY CHANGES]
   cci:                   [NCI BEGIN UNBIND DELETED BINDINGS]
   cci:                   [NCI END UNBIND DELETED BINDINGS] Reboot = 0
   cci:                   [NCI BEGIN STOP SERVICES]
   cci:                   [NCI END STOP SERVICES]
   cci:                   [NCI BEGIN UNINSTALL COMPONENTS]
   cci:                   [NCI END UNINSTALL COMPONENTS]
   cci:                   [NCI BEGIN START SERVICES]
   cci:                   [NCI END START SERVICES]
   cci:                   [NCI BEGIN BIND ADDED BINDPATHS]
   cci:                   [NCI END BIND ADDED BINDPATHS]. Reboot 0
   cci:                   [NCI BEGIN NOTIFY APPLY PNP CHANGES]
   cci:                   [NCI END NOTIFY APPLY PNP CHANGES]
   cci:                   NCI: INetCfg Installer Interface Released write lock. 23:32:03.406
   cci:

   cci:                   [NCI END BINDINGS UPDATE for USB\VID_0BDA&PID_8187\380A0AA13C23. Result 0x00000000]
   cci:                   [NCI END INSTALL DEVICE for USB\VID_0BDA&PID_8187\380A0AA13C23]
   dvi:             Class installer: Exit
   dvi:             CoInstaller 2: Enter (Post Processing) 23:32:03.406
   cci:                   NCI: WLAN Coinst asking for write lock. 23:32:03.406
   cci:                   NCI: WLAN Coinst acquired write lock. 23:32:03.406
   cci:                   NCI: WLAN Coinst Released write lock. 23:32:03.406
   cci:

   dvi:             CoInstaller 2: Exit (Post Processing)
   dvi:             CoInstaller 1: Enter (Post Processing) 23:32:03.406
   cci:                   [NdisCoinst: Enter NcipUpdateIfDescr]
   cci:                   NdisCoinst: IfType 71, NetLuidIndex 0, IfDescr Realtek RTL8187 Wireless 802.11b/g 54Mbps USB 2.0 Network Adapter
   cci:                   [NdisCoinst: Exit NcipUpdateIfDescr]
   cci:                   [NdisCoinst: Enter NcipSetiScsiFlags]
   cci:                   NdisCoinst: Succefully set the BootFlags
   cci:                   [NdisCoinst: Exit NcipSetiScsiFlags]
   dvi:             CoInstaller 1: Exit (Post Processing)
   dvi:          {DIF_INSTALLDEVICE - exit(0x00000000)} 23:32:03.406
   dvi:          {DIF_NEWDEVICEWIZARD_FINISHINSTALL} 23:32:03.406
   dvi:             CoInstaller 1: Enter 23:32:03.406
   dvi:             CoInstaller 1: Exit
   dvi:             CoInstaller 2: Enter 23:32:03.406
   dvi:             CoInstaller 2: Exit
   dvi:             CoInstaller 3: Enter 23:32:03.406
   dvi:             CoInstaller 3: Exit
   dvi:             Class installer: Enter 23:32:03.406
   dvi:             Class installer: Exit
   dvi:          {DIF_NEWDEVICEWIZARD_FINISHINSTALL - exit(0x00000000)} 23:32:03.406
   ndv:          Device install status=0x00000000
   ndv:          Performing device install final cleanup...
! ndv:          Queueing up error report since device has a PnP problem...
   ndv:    {Core Device Install - exit(0x00000000)} 23:32:03.406
   dvi:    {DIF_DESTROYPRIVATEDATA} 23:32:03.406
   dvi:          CoInstaller 1: Enter 23:32:03.406
   dvi:          CoInstaller 1: Exit
   dvi:          CoInstaller 2: Enter 23:32:03.406
   dvi:          CoInstaller 2: Exit
   dvi:          CoInstaller 3: Enter 23:32:03.406
   dvi:          CoInstaller 3: Exit
   dvi:          Class installer: Enter 23:32:03.406
   dvi:          Class installer: Exit
   dvi:    {DIF_DESTROYPRIVATEDATA - exit(0x00000000)} 23:32:03.406
   ump:    Server install process exited with code 0x00000000 23:32:03.406
   ump: {Plug and Play Service: Device Install exit(00000000)}
   dvi: {Build Driver List} 23:32:03.406
! dvi:    Driver list already built
   dvi: {Build Driver List - exit(0x00000000)} 23:32:03.406
   dvi: {DIF_SELECTBESTCOMPATDRV} 23:32:03.406
   dvi:    Using exported function 'NetClassInstaller' in module 'X:\WINDOWS\system32\NetCfgx.dll'.
   dvi:    Class installer == NetCfgx.dll,NetClassInstaller
   dvi:    Using exported function 'NciDeviceInstall' in module 'X:\WINDOWS\system32\nci.dll'.
   dvi:    CoInstaller 1 == nci.dll,NciDeviceInstall
   dvi:    Using exported function 'WlanDeviceClassCoInstaller' in module 'X:\WINDOWS\system32\wlaninst.dll'.
   dvi:    CoInstaller 2 == wlaninst.dll,WlanDeviceClassCoInstaller
   dvi:    Using exported function 'WwanDeviceClassCoInstaller' in module 'X:\WINDOWS\system32\wwaninst.dll'.
   dvi:    CoInstaller 3 == wwaninst.dll,WwanDeviceClassCoInstaller
   dvi:    CoInstaller 1: Enter 23:32:03.421
   dvi:    CoInstaller 1: Exit
   dvi:    CoInstaller 2: Enter 23:32:03.421
   dvi:    CoInstaller 2: Exit
   dvi:    CoInstaller 3: Enter 23:32:03.421
   dvi:    CoInstaller 3: Exit
   dvi:    Class installer: Enter 23:32:03.421
   dvi:    Class installer: Exit
   dvi:    Default installer: Enter 23:32:03.421
   dvi:          {Select Best Driver}
   dvi:             Selected driver installs from section [RTL8187.ndi] in 'x:\windows\inf\oem2.inf'.
   dvi:             Class GUID of device remains: {4d36e972-e325-11ce-bfc1-08002be10318}.
   dvi:             Set selected driver complete.
   dvi:             Selected:
   dvi:                   Description - [Realtek RTL8187 Wireless 802.11b/g 54Mbps USB 2.0 Network Adapter]
   dvi:                   InfFile    - [x:\windows\inf\oem2.inf]
   dvi:                   Section    - [RTL8187.ndi]
   dvi:                   Signer    - []
   dvi:                   Rank       - [0xf0ff0000]
   dvi:          {Select Best Driver - exit(0x00000000)}
   dvi:    Default installer: Exit
   dvi: {DIF_SELECTBESTCOMPATDRV - exit(0x00000000)} 23:32:03.421
   dvi: {DIF_NEWDEVICEWIZARD_FINISHINSTALL} 23:32:03.421
   dvi:    CoInstaller 1: Enter 23:32:03.421
   dvi:    CoInstaller 1: Exit
   dvi:    CoInstaller 2: Enter 23:32:03.421
   dvi:    CoInstaller 2: Exit
   dvi:    CoInstaller 3: Enter 23:32:03.421
   dvi:    CoInstaller 3: Exit
   dvi:    Class installer: Enter 23:32:03.421
   dvi:    Class installer: Exit
   dvi: {DIF_NEWDEVICEWIZARD_FINISHINSTALL - exit(0x00000000)} 23:32:03.421
<<<  Section end 2012/07/17 23:32:03.421
<<<  [Exit status: SUCCESS]

下贴继续。。。。。。。

zyk02 · 发表于 2012-7-18 00:11:27

以下是 Netrtuw.inf (For Win 7) 的内容：

;; Netrtuw.inf (For Win 7)
;;
;; Realtek RTL8187 Wireless 802.11g 54Mbps USB 2.0 Network Adapter
;;
;; Copyright (C) 2009 Realtek Semiconductor Corp.
;;
;; this release is primarily for WHQL test.
;;

[Version]
Signature = "$Windows NT$"
Class = Net
ClassGUID = {4d36e972-e325-11ce-bfc1-08002be10318}
Provider = %Realtek%
CatalogFile.NT = netrtuw.cat ;; for WHQL certified
DriverVer = 12/09/2009,6.1316.1209.2009

[Manufacturer]
%Realtek% = Realtek,NTx86.6.1

[ControlFlags]
ExcludeFromSelect = USB\VID_0BDA&PID_8187&REV_0100

;;****************************************************************************
;; IDs for X86
;;****************************************************************************
[Realtek.NTx86.6.1]
%RTL8187.DeviceDesc% = RTL8187.ndi, USB\VID_0BDA&PID_8187&REV_0100
%RTL8187.DeviceDesc% = RTL8187.ndi, USB\VID_13D1&PID_ABE6&REV_0100
%RTL8187.DeviceDesc% = RTL8187.ndi, USB\VID_1371&PID_9401&REV_0100
%RTL8187.DeviceDesc% = RTL8187.ndi, USB\VID_114B&PID_0150&REV_0100
%RTL8187.DeviceDesc% = RTL8187.ndi, USB\VID_18E8&PID_6232&REV_0100
%RTL8187.DeviceDesc% = RTL8187.ndi, USB\VID_0789&PID_010C&REV_0100
%RTL8187.DeviceDesc% = RTL8187.ndi, USB\VID_7392&PID_7612&REV_0100
%RTL8187.DeviceDesc% = RTL8187.ndi, USB\VID_145F&PID_0161&REV_0100
%RTL8187.DeviceDesc% = RTL8187.ndi, USB\VID_1B75&PID_8187&REV_0100

%RTL8187.DeviceDesc.Surecom% = RTL8187.ndi,USB\VID_0769&PID_11F2&REV_0100
%RTL8187.DeviceDesc.Sitecom% = RTL8187.ndi,USB\VID_0DF6&PID_000D&REV_0100

;;****************************************************************************
;; IDs for X64
;;****************************************************************************
[Realtek.NTamd64.6.1]
%RTL8187.DeviceDesc% = RTL8187.ndi, USB\VID_0BDA&PID_8187&REV_0100
%RTL8187.DeviceDesc% = RTL8187.ndi, USB\VID_13D1&PID_ABE6&REV_0100
%RTL8187.DeviceDesc% = RTL8187.ndi, USB\VID_1371&PID_9401&REV_0100
%RTL8187.DeviceDesc% = RTL8187.ndi, USB\VID_114B&PID_0150&REV_0100
%RTL8187.DeviceDesc% = RTL8187.ndi, USB\VID_18E8&PID_6232&REV_0100
%RTL8187.DeviceDesc% = RTL8187.ndi, USB\VID_0789&PID_010C&REV_0100
%RTL8187.DeviceDesc% = RTL8187.ndi, USB\VID_7392&PID_7612&REV_0100
%RTL8187.DeviceDesc% = RTL8187.ndi, USB\VID_145F&PID_0161&REV_0100
%RTL8187.DeviceDesc% = RTL8187.ndi, USB\VID_1B75&PID_8187&REV_0100

%RTL8187.DeviceDesc.Surecom% = RTL8187.ndi,USB\VID_0769&PID_11F2&REV_0100
%RTL8187.DeviceDesc.Sitecom% = RTL8187.ndi,USB\VID_0DF6&PID_000D&REV_0100

;;****************************************************************************
;; Windows 2000/XP
;;****************************************************************************
[RTL8187.ndi.NT]
AddReg = RTL8187.common.reg, RTLWLAN.reg, RTL8187_os61.reg
Characteristics = 0x84
BusType = 15
CopyFiles = RTL8187.CopyFiles
*IfType = 71          ; IF_TYPE_IEEE80211
*MediaType = 16          ; NdisMediumNative802_11
*PhysicalMediaType = 9       ; NdisPhysicalMediumNative802_11

[RTL8187.ndi.NT.Services]
AddService = RTL8187, 2, RTL8187.nt61.Service, RTL8187.nt61.EventLog

[RTL8187.ndi.NT.HW]
AddReg = RTL8187_os61.vwifi.reg

;;****************************************************************************
;; register for both Win 7 x86 and x64               **
;;****************************************************************************
[RTL8187_os61.reg]
HKR, Ndi, Service, 0, "RTL8187"
HKR, Ndi\Interfaces, UpperRange, 0, "ndis5,mdcwifi,wifipro"
HKR, Ndi\Interfaces, LowerRange, 0, "wlan, ethernet,vwifi"

[RTL8187.nt61.Service]
DisplayName = %RTL8187.DeviceDesc.DispName%
ServiceType = 1 ; SERVICE_KERNEL_DRIVER
StartType    = 3 ; SERVICE_DEMAND_START
ErrorControl = 1 ; SERVICE_ERROR_NORMAL
ServiceBinary  = %12%\rtl8187.sys
LoadOrderGroup = NDIS

[RTL8187.nt61.EventLog]
AddReg = RTL8187.nt61.AddEventLog.reg

[RTL8187.nt61.AddEventLog.reg]
HKR, , EventMessageFile, 0x00020000, "%%SystemRoot%%\System32\netevent.dll"
HKR, , TypesSupported  , 0x00010001, 7

;; Adds the VWiFi PNP filter
[RTL8187_os61.vwifi.reg]
HKR,,"UpperFilters",0x00010000,"vwifibus"

;*******************************************************************************
; RTL8187 common paramters
;*******************************************************************************
[RTL8187.common.reg]
HKR,Ndi\params\LedCtrl,       ParamDesc,  0, %LED_CONTROL_STR%
HKR,Ndi\params\LedCtrl,       type,    0, "enum"
HKR,Ndi\params\LedCtrl,       default, 0, "1"
HKR,Ndi\params\LedCtrl\enum, "0",       0, %Disable_STR%
HKR,Ndi\params\LedCtrl\enum, "1",       0, %ENABLE_STR%
HKR,defaults,LedCtrl,0,"1"
HKR,,LedCtrl,0,"1"

HKR,NDI\params\PowerSaveMode,    ParamDesc,  0, %POWER_SAVE_STR%
HKR,NDI\params\PowerSaveMode,    type,    0, "enum"
HKR,Ndi\params\PowerSaveMode,    default, 0, "0"
HKR,NDI\params\PowerSaveMode\enum, "0",       0, %CAM_STR%
HKR,NDI\params\PowerSaveMode\enum, "1",       0, %MAX_PSP_STR%
HKR,NDI\params\PowerSaveMode\enum, "2",       0, %FAST_PSP_STR%
HKR,defaults,PowerSaveMode,0,"0"
HKR,,PowerSaveMode,0,"0"

HKR,Ndi\params\WiFi11bIbss,       ParamDesc,  0, %WIFI_IBSS_STR%
HKR,Ndi\params\WiFi11bIbss,       type,    0, "enum"
HKR,Ndi\params\WiFi11bIbss,       default, 0, "0"
HKR,Ndi\params\WiFi11bIbss\enum, "0",       0, %DISABLE_STR%
HKR,Ndi\params\WiFi11bIbss\enum, "1",       0, %ENABLE_STR%
HKR,defaults,WiFi11bIbss,0,"0"
HKR,,WiFi11bIbss,0,"0"

HKR,Ndi\params\bRateAdaptive,       ParamDesc,  0, %RATE_ADAPTIVE_STR%
HKR,Ndi\params\bRateAdaptive,       type,    0, "enum"
HKR,Ndi\params\bRateAdaptive,       default, 0, "1"
HKR,Ndi\params\bRateAdaptive\enum, "0",       0, %DISABLE_STR%
HKR,Ndi\params\bRateAdaptive\enum, "1",       0, %ENABLE_STR%
HKR,defaults,bRateAdaptive,0,"1"
HKR,,bRateAdaptive,0,"1"

; IC specific
HKR,,QoS,0,"0"
HKR,,CcxRm,0,"0"

;;----------------------------------------------------------------------------
;; Realtek WLAN NIC parameters
;;----------------------------------------------------------------------------
[RTLWLAN.reg]
HKR,,SSID,0,""

HKR,Ndi\params\Channel,    ParamDesc,  0, %CHANNEL_STR%
HKR,Ndi\params\Channel,    type,    0, "int"
HKR,Ndi\params\Channel,    default, 0, "1"
HKR,Ndi\params\Channel,    Min,       0, "1"
HKR,Ndi\params\Channel,    Max,       0, "14"
HKR,Ndi\params\Channel,    Step,    0, "1"
HKR,Ndi\params\Channel,    Base,    0, "10"
HKR,defaults,Channel,0,"1"
HKR,,Channel,0,"1"

HKR,Ndi\params\NetworkType,       ParamDesc,  0, %NETWORK_TYPE_STR%
HKR,Ndi\params\NetworkType,       type,    0, "enum"
HKR,Ndi\params\NetworkType,       default, 0, "1"
HKR,Ndi\params\NetworkType\enum, "0",       0, %AD_HOC_STR%
HKR,Ndi\params\NetworkType\enum, "1",       0, %INFRA_STR%
HKR,Ndi\params\NetworkType\enum, "2",       0, %AUTO_SELECT_STR%
HKR,defaults,NetworkType,0,"1"
HKR,,NetworkType,0,"1"

HKR,Ndi\params\ChannelPlan, ParamDesc, 0, %CHANNEL_PLAN_STR%
HKR,Ndi\params\ChannelPlan, type, 0, "enum"
HKR,Ndi\params\ChannelPlan, default, 0, "15"
HKR,Ndi\params\ChannelPlan\enum, "0", 0, "FCC"
HKR,Ndi\params\ChannelPlan\enum, "1", 0, "IC"
HKR,Ndi\params\ChannelPlan\enum, "2", 0, "ETSI"
HKR,Ndi\params\ChannelPlan\enum, "3", 0, "Spain"
HKR,Ndi\params\ChannelPlan\enum, "4", 0, "France"
HKR,Ndi\params\ChannelPlan\enum, "5", 0, "MKK"
HKR,Ndi\params\ChannelPlan\enum, "6", 0, "MKK1"
HKR,Ndi\params\ChannelPlan\enum, "7", 0, "Israel"
HKR,Ndi\params\ChannelPlan\enum, "8", 0, "TELEC"
HKR,Ndi\params\ChannelPlan\enum, "15", 0, "DOMAIN_FROM_EEPROM"
HKR,defaults,ChannelPlan, 0, "15"
HKR,,ChannelPlan, 0, "15"

; Wireless Mode, 2006.11.30, by shien chang.
HKR,Ndi\params\WirelessMode, ParamDesc, 0, %WL_MODE_STR%
HKR,Ndi\params\WirelessMode, type, 0, "enum"
HKR,Ndi\params\WirelessMode, default, 0, "8"
;HKR,Ndi\params\WirelessMode\enum, "1", 0, "IEEE 802.11a"
HKR,Ndi\params\WirelessMode\enum, "2", 0, "IEEE 802.11b"
HKR,Ndi\params\WirelessMode\enum, "4", 0, "IEEE 802.11b/g"
;HKR,Ndi\params\WirelessMode\enum, "8", 0, "Auto"
HKR,defaults,WirelessMode, 0, "4"
HKR,,WirelessMode, 0, "4"

; For PSP XLink mode, 2006.09.04, by shien chang.
;HKR,Ndi\params\PSPXlinkMode,       ParamDesc,  0, %PSP_XLINK_STR%
;HKR,Ndi\params\PSPXlinkMode,       type,    0, "enum"
;HKR,Ndi\params\PSPXlinkMode,       default, 0, "0"
;HKR,Ndi\params\PSPXlinkMode\enum, "0",       0, "Disable"
;HKR,Ndi\params\PSPXlinkMode\enum, "1",       0, "Enable"
;HKR,defaults,PSPXlinkMode,0,"0"
;HKR,,PSPXlinkMode,0,"0"

; Preamble mode, 2006.11.30, by shien chang.
HKR,Ndi\params\PreambleMode, ParamDesc, 0, %PREAMBLE_MODE_STR%
HKR,Ndi\params\PreambleMode, type, 0, "enum"
HKR,Ndi\params\PreambleMode, default, 0, "2"
HKR,Ndi\params\PreambleMode\enum, "1", 0, "Long Preamble"
HKR,Ndi\params\PreambleMode\enum, "2", 0, "Auto"
HKR,Ndi\params\PreambleMode\enum, "3", 0, "Short Preamble"
HKR,defaults,PreambleMode, 0, "2"
HKR,,PreambleMode, 0, "2"

HKR,,DefaultKeyID,,"0"
HKR,,DefaultKey0,,""
HKR,,DefaultKey1,,""
HKR,,DefaultKey2,,""
HKR,,DefaultKey3,,""

;*******************************************************************************
; Destination Directory
;*******************************************************************************
[RTL8187.CopyFiles]
RTL8187.sys,,,2

[DestinationDirs]
DefaultDestDir    = 11
RTL8187.CopyFiles = 12

;;****************************************************************************
;; Source Files
;;****************************************************************************
[SourceDisksFiles]
RTL8187.sys = 1

[SourceDisksNames]
1=%DISKNAME%,,,

;*******************************************************************************
; Strings
;*******************************************************************************
[Strings]
Realtek = "Realtek Semiconductor Corp."
SSID_STR = "SSID"
CHANNEL_STR = "Channel"
NETWORK_TYPE_STR = "Network Type"
LED_CONTROL_STR = "LED Control"
POWER_SAVE_STR = "Power Save Mode"
WIFI_IBSS_STR = "IBSS Default 11b Mode"
RATE_ADAPTIVE_STR = "Rate Adaptive"
QOS_STR = "QoS"
TransmitBuffers               = "Transmit Buffers"
ReceiveBuffers                = "Receive Buffers"
FORCE_PRIORITY_STR = "Forced Priority"
HW_PARA_STR = "Init from HwParaFile"
THREE_WIRE_MODE_STR = "Three Wire Programming Mode"
BOARD_TYPE_STR = "Board Type"
PROTECTION_MODE_STR = "Protection Mode"
TPC_STR = "Transmit Power Control"
TPC_POLARITY_STR = "TPC Polarity Select"
HIGH_POWER_STR = "High Power Mechanism"
INIT_GAIN_STR = "Initial Gain State"
CW_MAX_MIN_STR = "Contention Window"
PSP_XLINK_STR = "PSP XLink Mode"
ANTENNA_DIVERSITY_STR = "SW Antenna Diversity"
INACTIVE_POWER_SAVE = "Inactive Power Save"
B_MODE_INIT_GAIN_STR = "B Mode Initial Gain"
WL_MODE_STR = "Wireless Mode"
PREAMBLE_MODE_STR = "Preamble Mode"
FRAGTHRESH_STR = "Fragmentation Threshold"
RTSTHRESH_STR = "RTS Threshold"
DOT11_ENABLE_STR = "802.11d"
CHANNEL_PLAN_STR = "Channel Plan"
CAM_STR ="CAM"
MAX_PSP_STR ="MAX_PSP"
FAST_PSP_STR ="Fast_PSP"
DISABLE_STR ="Disable"
ENABLE_STR ="Enable"
AD_HOC_STR ="Ad Hoc"
INFRA_STR ="Infrastructure"
AUTO_SELECT_STR ="Auto select"
11A_STR ="IEEE 802.11 a"
11B_STR ="IEEE 802.11 b"
11BG_STR ="IEEE 802.11 b/g"
LONG_PREAMBLE_STR ="Long Preamble"
SHORT_PREAMBLE_STR ="Short Preamble"
AUTO_STR ="Auto"

;; Source disk name
DISKNAME = "Realtek RTL8187 Wireless 802.11b/g 54Mbps USB 2.0 Network Adapter Driver Disk"
RTL8187.DeviceDesc = "Realtek RTL8187 Wireless 802.11b/g 54Mbps USB 2.0 Network Adapter"
RTL8187.DeviceDesc.DispName = "Realtek RTL8187 Wireless 802.11b/g 54Mbps USB 2.0 Network Adapter"
RTL8187.DeviceDesc.Surecom = "SURECOM EP-9001-g 802.11g 54M WLAN USB Adapter"
RTL8187.DeviceDesc.Sitecom = "SITECOM WL-168 Wireless Network USB Adapter 54g"

实在不好意思，太长了，楼主注意休息呵。

lasti · 发表于 2012-7-18 08:42:18

N年之后回来，终于等到有win7pe的骨头版了，真是非常感谢啊

无垠 · 发表于 2012-7-18 09:31:20

原帖由 hlstudio 于 2012-7-17 20:57 发表
在config/software注册表
classes/doc
classes/OfficeWord

然后在regdoc.cmd中这么引用的
REG ADD HKCR\OfficeWord\shell\open\command /ve /t REG_SZ /d "\"%TP%\文本图像\OFFICE\WORD.EXE\" "\"%%1\" / ...

谢谢，已解决。举一反三，系统已关联图片、doc、xls、gho、iso及压缩文件包。

hlstudio · 发表于 2012-7-18 09:37:25

辛苦了，这么晚还在测试。
从楼上日志来看，驱动基本装上了。
无线网络启用过程：

如上图，选择 WIFI 页签，点击开始，启动WIFI后，有无线网络时页面如下图：

依据你需要手工安装驱动的情况来看，可以先启用网络，再手工安装驱动，再如上启用WIFI。

请进一步在启用WIFI后测试确认：
①网卡列表中有无 RELTEK无线网卡
②SSID列表中能搜索到无线网络吗？
③如果搜索到无线网卡，则选中一个网络，双击即可（有的要输入密码）连接。

BTW：我的SSID清单是空的，因为我这个网卡有点问题，正常情况下，这个清单应该有10个8个的无线网络

[ 本帖最后由 hlstudio 于 2012-7-18 09:39 编辑 ]

2012kezhangbio · 发表于 2012-7-18 11:10:48

都说骨头的好，我也要下载来看看到底怎样

zyk02 · 发表于 2012-7-18 13:46:13

按照楼主的方法，不好意思，还是出不来。可能原因如下：
1. 可能是外插 USB 无线网卡的缘故，但网卡是好的。
2. 试过在 XPSp3 和其它 win7pe 中，装完驱动还要重启。但pe 是map ×.iso启动，重启无效。

骨头win7pe是其它win7pe中启动最快的，还将继续使用下去。多谢楼主指导，让我们学到了不少知识。

hlstudio · 发表于 2012-7-18 16:06:27

是啊，可能和外插USB有关，没有环境有些不好调试。
前面有一例说某款一体机不能识别u盘的，也没有定位到。

zyk02 · 发表于 2012-7-18 16:18:49

继续关注，继续学习。。。。。。。。

无垠 · 发表于 2012-7-20 09:23:36

原帖由 一望无垠 于 2012-7-18 09:31 发表

谢谢，已解决。举一反三，系统已关联图片、doc、xls、gho、iso及压缩文件包。

再请教，我在其它XPPE系统中顺利实现了上述关联。但在其它win7pe中按此方法，却不能实现文件关联，另，我虽然能把UD区petools 目录读取到x:\盘，但参照大大的win7pe，却不能在程序\petools 上显示，其它03pe也如此，只好在桌面建立了文件夹快捷方式。再请指点！

hlstudio · 发表于 2012-7-20 14:38:25

①WIN7PE中文件关联应该是一样的，注册表同样修改，外置是共用的。

②看有x:\PETOOLS目录吗？能正确识别到别的硬盘根目录上PETOOLS吗？
如果上述都没有问题，注意看WIN7PE内核中pecmd.ini最后一行，读取UD区和加载PETOOLS这两个命令应该组合成串行执行。

无垠 · 发表于 2012-7-20 16:25:08

原帖由 hlstudio 于 2012-7-20 14:38 发表
①WIN7PE中文件关联应该是一样的，注册表同样修改，外置是共用的。

②看有x:\PETOOLS目录吗？能正确识别到别的硬盘根目录上PETOOLS吗？
如果上述都没有问题，注意看WIN7PE内核中pecmd.ini最后一行，读取UD区 ...

改装w03pe 成功实现文件关联和开始菜单 petools

但其它win7pe 还是不能文件关联和显示程序\petools ，查x盘有petools目录和文件；启动pe后运行regedit 查注册表项也有添加的相关内容。不知道如何做了。

zhaohj · 发表于 2012-7-20 16:56:31

w03pe不管，此精简版链接显示 “程序\xx盘petools ”肯定没问题的。
目前的精简版，就缺diskpart组件，或者找一个能代替的工具也行。主要想vhd的创建及挂载分配盘符。

hlstudio · 发表于 2012-7-20 17:07:13

你这工具太多了啊，还不少是wim的。

已经有了imdisk了，还要搞vhd啊？好像在坛子里见过说先预置好已格式化的vhd，再直接挂载，这样是不是就省diskpart了。

无垠 · 发表于 2012-7-20 17:16:25

原帖由 zhaohj 于 2012-7-20 16:56 发表
w03pe不管，此精简版链接显示 “程序\xx盘petools ”肯定没问题的。
目前的精简版，就缺diskpart组件，或者找一个能代替的工具也行。主要想vhd的创建及挂载分配盘符。

是啊，骨头版的win7pe 可以实现程序\petools,也能上网，关联相关文件，真不错，收藏做合盘用了；改装其它w03pe和xppe 也成功实现了此功能。目前照此方法修改饭大的native win7pe不成功，不能关联文件和显示程序\petools ，我只好在桌面建 petools 文件夹快捷方式了。

zhaohj · 发表于 2012-7-20 17:16:36

原帖由 hlstudio 于 2012-7-20 17:07 发表
你这工具太多了啊，还不少是wim的。

已经有了imdisk了，还要搞vhd啊？好像在坛子里见过说先预置好已格式化的vhd，再直接挂载，这样是不是就省diskpart了。

嵌入式的fbwf对imdisk虚拟的盘无法挂载。
先预置好已格式化的vhd，再直接挂载，有什么工具？
我测试了几个都不太好。

hlstudio · 发表于 2012-7-26 10:41:14

从同事那借了一个USB无线网卡TL-WN620G，没找到WIN7的驱动，从驱动之家下载了一个vista的驱动。
先启用网络，然后用pecmd devi netathrusb.inf手工加载驱动，成功加载了无线网络，并连通。

[ 本帖最后由 hlstudio 于 2012-7-26 10:44 编辑 ]

yys5161 · 发表于 2012-7-29 21:40:34

这个骨头版的需要下载收藏了。

T000 · 发表于 2012-8-16 10:03:54

请教一下如何把这个PE安装到WIN7中启动项如何修改？

[发布] 【20240517】骨头网络版PE[win10-96M][win8-56M][win7-37M][XP-16M]

回复 #755 一望无垠的帖子

回复 #758 zyk02 的帖子

回复 #763 zyk02 的帖子

回复 #768 zyk02 的帖子

请教H大

回复 #771 一望无垠的帖子

回复 #774 zhaohj 的帖子

回复 #770 zyk02 的帖子

浏览过的版块

		自动登录	找回密码
密码			注册