无忧启动论坛

 找回密码
 注册
搜索
系统gho:最纯净好用系统下载站广告联系 微信:wuyouceo QQ:184822951
楼主: chiannet

【2012】娇小身躯、刚强内力的2003 SKYPE(Native UD+ISO)

[复制链接]
发表于 2011-6-23 08:57:23 | 显示全部楼层
蓝屏:0x00000071(全部0)

提取WINPE.IS_挂到自己用的ISO里也是同样的提示,说明是WINPE.IS_有问题————我的安装方式是BOOTICE手工大法!

[ 本帖最后由 nnail 于 2011-6-23 09:52 编辑 ]
回复

使用道具 举报

发表于 2011-6-23 09:38:32 | 显示全部楼层
有英文版,太好了,支持支持
回复

使用道具 举报

 楼主| 发表于 2011-6-23 10:28:04 | 显示全部楼层

回复 #31 nnail 的帖子

没看懂你是怎么用的。
回复

使用道具 举报

发表于 2011-6-23 10:36:20 | 显示全部楼层
安装用Grdlr+PE.ISO————蓝屏



提取你ISO中的WINPE.IS_替换我自己用的PE.ISO,同样的安装也是蓝屏。
回复

使用道具 举报

 楼主| 发表于 2011-6-23 10:49:24 | 显示全部楼层

回复 #34 nnail 的帖子

BOOTICE,安装grldr引导,把ISO内的整个AXPE目录复制到grldr所在分区

引导本PE的方式:

title   Windows 2003 PE
find --set-root /AXPE/SETUPLDR.BIN
chainloader ()/AXPE/SETUPLDR.BIN


就这么简单

[ 本帖最后由 chiannet 于 2011-6-23 10:50 编辑 ]
回复

使用道具 举报

 楼主| 发表于 2011-6-23 10:53:22 | 显示全部楼层
可自动安装到C:\盘,喜欢手动也很容易,




手动安装到本地硬盘:

把ISO内的整个AXPE目录复制到boot.ini所在分区

boot.ini内容如下
[boot loader]
timeout=4
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /noexecute=optin /fastdetect
c:\grldr="Windows PE"



在boot.ini所在分区放一个grldr

建立一个MENU.LST,内容如下:

timeout 0
default 0
title   Windows 2003 PE
find --set-root /AXPE/SETUPLDR.BIN
chainloader ()/AXPE/SETUPLDR.BIN


就这么简单

[ 本帖最后由 chiannet 于 2011-6-23 10:55 编辑 ]
回复

使用道具 举报

发表于 2011-6-23 10:54:59 | 显示全部楼层
能引导,能加载,到登录界面要转换成桌面时就蓝屏了……
回复

使用道具 举报

 楼主| 发表于 2011-6-23 10:56:15 | 显示全部楼层

回复 #37 nnail 的帖子

你使用的map iso方式?
回复

使用道具 举报

发表于 2011-6-23 11:17:50 | 显示全部楼层

回复 #38 chiannet 的帖子

是的

map /WINPE.ISO (0xff) || map --mem /WINPE.ISO (0xff)
map --hook
chainloader (0xff)
回复

使用道具 举报

 楼主| 发表于 2011-6-23 11:33:55 | 显示全部楼层

回复 #39 nnail 的帖子

这不就是了,map方式引发的一切故障暂不考虑。

非要用这种方式,必须要:

title   Windows 2003 PE
map FIRADISK.ima (fd0)
map /WINPE.ISO (0xff) || map --mem /WINPE.ISO (0xff)
map --hook
chainloader (0xff)



把此附件扩展名改为IMA
FIRADISK.zip (14.6 KB, 下载次数: 51)
回复

使用道具 举报

发表于 2011-6-23 14:49:47 | 显示全部楼层
问题好像不在这里,这样处理后同样的结果,到达初始化在到桌面时出现蓝屏…………

引导应该没有问题…………
回复

使用道具 举报

发表于 2011-6-23 15:52:46 | 显示全部楼层
测试了一个,UD区为HDD格式的金士顿4g U盘,该PE放可见区,虚拟机测试通过,该虚拟机会把U盘认成HDD。
实机测试,BIOS将U识别为ZIP,加--mem参数整体启动,进入桌面外置工具不能加载。自动搜索PETOOLS异常,不能显示快捷方式。
  而加载FIRADISK后可以显示外置工具。
结论:该PE对ZIP格式的U盘支持不好。对HDD格式支持正常。
回复

使用道具 举报

 楼主| 发表于 2011-6-23 15:57:15 | 显示全部楼层

回复 #41 nnail 的帖子

争论无益,看图说话。。。,怀疑你firadisk.ima木有map成功?

以下是利用map --mem方式物理机器引导的PE截图。
其中A:\是map --mem /PE/XXX.ima (fd0)所得;
其中G:\是map --mem /PE/XXX .iso (0xff)所得;


未命名.JPG

[ 本帖最后由 chiannet 于 2011-6-23 16:15 编辑 ]
回复

使用道具 举报

 楼主| 发表于 2011-6-23 16:02:11 | 显示全部楼层

回复 #42 幸运的草 的帖子

所述状况与PE完全无关,属于Grub4dos的问题。建议您仔细阅读

http://bbs.wuyou.net/forum.php?m ... &extra=page%3D1

将其中的move方案好好消化。所以你现在得到的所得结论自然站不住脚。由衷感谢参与评测。
回复

使用道具 举报

发表于 2011-6-23 17:02:36 | 显示全部楼层

回复 #43 chiannet 的帖子

不是争论,我是小白,最多算是个老白……

我想不明白的是,已经初始化完成到达桌面这时一闪才蓝屏,这样应该不是引导的问题吧……
回复

使用道具 举报

发表于 2011-6-23 17:18:40 | 显示全部楼层
几天前在天空看到过,,,,,,,呵呵,,就是更新太频繁了,,,一直没下,,,这次估计快定版了,,,,我也来折腾一下
回复

使用道具 举报

 楼主| 发表于 2011-6-23 18:21:35 | 显示全部楼层

回复 #45 nnail 的帖子

已经初始化完成到达桌面这时一闪才蓝屏,


发生蓝屏是特定机器还是所以机器?


你可以试试换一种引导方式:比如35楼得方式。


顺便说一下,刚才已把fradisk驱动内置到Pe里了。即便map iso方式引导,也不需要再map -mem fradisk.ima (fd0)了。
回复

使用道具 举报

发表于 2011-6-23 20:09:36 | 显示全部楼层
在我的机器上启动时蓝屏,AMD780主板,2G内存,用Grub4Dos启动
回复

使用道具 举报

发表于 2011-6-23 20:29:22 | 显示全部楼层
进入后右键时7Z解压会出现两个呀?
回复

使用道具 举报

 楼主| 发表于 2011-6-23 21:03:54 | 显示全部楼层

回复 #48 LiiGuang 的帖子

能说详细点么?蓝屏错误号?硬盘控制器HWID等。
回复

使用道具 举报

发表于 2011-6-24 00:40:47 | 显示全部楼层
这个是 光盘的吗? 启动没有菜单?直接启动?
回复

使用道具 举报

发表于 2011-6-24 01:11:29 | 显示全部楼层
发现个问题,就是 怎么看不到我的电脑的硬盘了啊?
回复

使用道具 举报

 楼主| 发表于 2011-6-24 05:59:47 | 显示全部楼层

回复 #52 2011wzdpd 的帖子

你的是什么主板,能把磁盘控制器HWID贴出来么,这样才能解决你提的这个问题。
回复

使用道具 举报

发表于 2011-6-24 10:44:27 | 显示全部楼层
Dell r210服务器成功认盘,很好。  就是不喜欢主题图标,还是喜欢windows默认的图标。于是把这个和HHH333的内核整合了一下,呵呵
回复

使用道具 举报

 楼主| 发表于 2011-6-24 10:50:12 | 显示全部楼层

回复 #54 drdark 的帖子

是不喜欢主题图标?
你说壁纸?壁纸可自由更换,比其他任何PE换起来都容易,放置到AXPE\FILE\PIC下就可以了
回复

使用道具 举报

发表于 2011-6-24 12:25:46 | 显示全部楼层
原帖由 chiannet 于 2011-6-24 10:50 发表
是不喜欢主题图标?
你说壁纸?壁纸可自由更换,比其他任何PE换起来都容易,放置到AXPE\FILE\PIC下就可以了


不是壁纸,是图标,比如“我的电脑”,文件夹等, 审美习惯了windows的那一套东西,突然不一样感觉怪怪的,呵呵
回复

使用道具 举报

发表于 2011-6-25 09:33:42 | 显示全部楼层
看着不错,期待你的更加完善
回复

使用道具 举报

发表于 2011-6-25 10:30:22 | 显示全部楼层

回复 #44 chiannet 的帖子

结论正确与否没关系,实际测试结果就是如此,同一个U盘,同一个PE,换一台电脑,该BIOS把U盘识别为HDD,启动--mem正常,但对于ZIP格式的U盘,启动后却不能加载外置,是实际情况,与PE无关?不可能,如果是G4D的问题,那只能是PE适应G4D,而G4D不可能去适应PE吧。还有你的那个全藏入UD区的那个,我也参与测试过,怎么没这个问题?
  我是整体启动的,是用ISO启动器加--mem参数启动的。不是解开放可见区调用BIN启动的,你提供的那个帖子不适合这种情况。
  RUN、新版0PE,在测试时都是在ZIP格式方面出问题,HDD格式却正常,后来原作者不都进行了优化,解决了这个问题,G4D在ZIP方面确实另类,但制作PE及其他在G4D下运行的东东,作者是不是应该考虑这方面的支持?我只是把测试的情况提供给你,改不改进是你的事。
回复

使用道具 举报

 楼主| 发表于 2011-6-25 11:17:18 | 显示全部楼层

回复 #58 幸运的草 的帖子

解决的办法在这个帖子:

http://sky123.org/forum-redirect ... -fromuid-34408.html


最终发布的东西在这里:
http://u.115.com/file/clv81r0w#
Mini_PE_ISO.7z


您辛苦了,衷心感谢您参与进来,并据实反馈。再次诚挚感谢。

[ 本帖最后由 chiannet 于 2011-6-25 11:21 编辑 ]
回复

使用道具 举报

发表于 2011-6-25 12:49:39 | 显示全部楼层
早上测试在一台Dell 2950服务器上不认盘。ID见图, 官方txtsetup.oem贴上
raid1.JPG
raid2.JPG

1。
#-------------------------------------------------------------
# Copyright (c) Adaptec Inc. 2007
#
#-------------------------------------------------------------

#
# General format:
#
# [section]
# key = value1,value2,...
#
#
# The hash ('#') introduces a comment.
# Strings with embedded spaces, commas, or hashes should be double-quoted
#

#-------------------------------------------------------------
#                          
# [Disks]
#
# This section lists all disks in the disk set.
#
# <description> is a descriptive name for a disk, used when
#
#               prompting for the disk
# <tagfile>     is a file whose presence allows setup to recognize
#               that the disk is inserted.
#
# <directory>   is where the files are located on the disk.
#
#-------------------------------------------------------------
[Disks]
d1   = "Adaptec Ultra160 Windows 32-bit FMS4.0 SP5 S5", \u160dsk1, \

#-------------------------------------------------------------
#
# [Defaults]
#
# This section lists the default selection for each 'required'
# hardware component.  If a line is not present for a component,
# the default defaults to the first item in the [<component_name>]
# section (see below).
#
# <component_name> is one of computer, display, keyboard, mouse, scsi
# <id>             is a unique <within the component> string to be associated
#                  with an option.
#
#-------------------------------------------------------------
[Defaults]
scsi = a7899NT60

#-------------------------------------------------------------
#
# [scsi]
#
# This section lists the options available for a particular component.
#
# <id>          is the unique string for the option
# <description> is a text string, presented to the user in a menu
# <key_name>    gives the name of the key to be created for the component in
#               HKEY_LOCAL_MACHINE\ControlSet001\Services
#
#-------------------------------------------------------------
[scsi]
a7899NT60 = "Adaptec Ultra160 Windows 32-bit FMS4.0 SP5 S5"

#-------------------------------------------------------------
# [Files.scsi.a78xxNT40]
#
# This section lists the files that should be copied if the user
# selects a particular component option.
#
# <file_type>   is one of driver, port, class, dll, hal, inf, or detect.
#               See below.
#
# <source_disk> identifies where the file is to be copied from, and must
#               match en entry in the [Disks] section.
#
# <filename>    is the name of the file. This will be appended to the
#               directory specified for the disk in the [Disks] section to form the
#               full path of the file on the disk.
#
#-------------------------------------------------------------
[Files.scsi.a7899NT60]
driver  = d1, adpu160m.sys, adpu160m
inf     = d1, adpu160m.inf
catalog = d1, adpu160m.cat


#-------------------------------------------------------------
#
# [Config.adpu160m]
#
# This section specifies values to be set in the registry for
# particular component options.  Required values in the services\xxx
# key are created automatically -- use this section to specify additional
# keys to be created in services\xxx and values in services\xxx and
# services\xxx\yyy.
#
# <key_name>   is relative to the services node for this device.
#              If it is empty, then it refers to the services node.
#              If specified, the key is created first.
#
# <value_name> specifies the value to be set within the key
#
# <value_type> is a string like REG_DWORD.  See below.
#
# <value>      specifies the actual value; its format depends on <value_type>
#
#-------------------------------------------------------------
#
[Config.adpu160m]
value = "", tag, REG_DWORD, 20
value = Parameters\PnpInterface,5, REG_DWORD,1

[HardwareIds.scsi.a7899NT60]
id = "PCI\VEN_9005&DEV_00C0", "adpu160m"
id = "PCI\VEN_9005&DEV_00C0&SUBSYS_F6209005", "adpu160m"
id = "PCI\VEN_9005&DEV_00C0&SUBSYS_F6200E11", "adpu160m"

id = "PCI\VEN_9005&DEV_0080", "adpu160m"
id = "PCI\VEN_9005&DEV_0080&SUBSYS_E2A09005", "adpu160m"
id = "PCI\VEN_9005&DEV_0080&SUBSYS_E2A00E11", "adpu160m"
id = "PCI\VEN_9005&DEV_0080&SUBSYS_62A09005", "adpu160m"
id = "PCI\VEN_9005&DEV_0080&SUBSYS_E2209005", "adpu160m"

id = "PCI\VEN_9005&DEV_00CF", "adpu160m"
id = "PCI\VEN_9005&DEV_008F", "adpu160m"

2。
# txtsetup.oem -  for the PERC RAID family of RAID Controllers
#
# ***********************************************************************
#                                                                       *
#   Copyright 2005 LSI Corp.  All rights reserved.               *
#                                                                       *
#   This file is property of LSI Corp. and is licensed for       *
#   use as is.  The receipt of or posession of this file does not       *
#   convey any rights to modify its contents, in whole, or in part,     *
#   without the specific written consent of LSI Corp.            *
#                                                                       *
# ***********************************************************************
#
# format for txtsetup.oem.
#
# General format:
#
# [section]
# key = value1,value2,...
#
#
# The hash ('#') introduces a comment.
# Strings with embedded spaces, commas, or hashes should be double-quoted
#

[Disks]

# This section lists all disks in the disk set.
#
# <description> is a descriptive name for a disk, used when
#   prompting for the disk
# <tagfile> is a file whose presence allows setup to recognize
#   that the disk is inserted.
# <directory> is where the files are located on the disk.
#

d1 = "DELL PERC5 and PERC6/CERC6 RAID Controller Driver (Server 2003 32 bit)", \percsas.sys, \

[Defaults]

# This section lists the default selection for each 'required'
# hardware component.  If a line is not present for a component,
# the default defaults to the first item in the [<component_name>]
# section (see below).
#
# <component_name> is one of computer, display, keyboard, mouse, scsi
# <id> is a unique <within the component> string to be associated
#   with an option.

scsi = PERC_32



[scsi]

# This section lists the options available for a particular component.
#
# <id> is the unique string for the option
# <description> is a text string, presented to the user in a menu
# <key_name> gives the name of the key to be created for the component in
#   HKEY_LOCAL_MACHINE\ControlSet001\Services


PERC_32    = "DELL PERC5 and PERC6/CERC6 RAID Controller Driver (Server 2003 32 bit)",percsas

[HardwareIds.scsi.PERC_32]
id = "PCI\VEN_1028&DEV_0015&SUBSYS_1F011028", "percsas"
id = "PCI\VEN_1028&DEV_0015&SUBSYS_1F021028", "percsas"
id = "PCI\VEN_1028&DEV_0015&SUBSYS_1F031028", "percsas"
id = "PCI\VEN_1000&DEV_0060&SUBSYS_1F0A1028", "percsas"
id = "PCI\VEN_1000&DEV_0060&SUBSYS_1F0B1028", "percsas"
id = "PCI\VEN_1000&DEV_0060&SUBSYS_1F0C1028", "percsas"
id = "PCI\VEN_1000&DEV_0060&SUBSYS_1F0D1028", "percsas"
id = "PCI\VEN_1000&DEV_0060&SUBSYS_1F111028", "percsas"


# This section lists the files that should be copied if the user
# selects a particular component option.
#
# <file_type> is one of driver, port, class, dll, hal, inf, or detect.
#   See below.
# <source_disk> identifies where the file is to be copied from, and must
#   match en entry in the [Disks] section.
# <filename> is the name of the file. This will be appended to the
#   directory specified for the disk in the [Disks] section to form the
#   full path of the file on the disk.


[Files.scsi.PERC_32]

driver  = d1, percsas.sys, percsas
inf     = d1, oemsetup.inf, percsas
inf     = d1, nodev.inf
catalog = d1, percsas.cat

# This section specifies values to be set in the registry for
# particular component options.  Required values in the services\xxx
# key are created automatically -- use this section to specify additional
# keys to be created in services\xxx and values in services\xxx and
# services\xxx\yyy.
#
# <key_name> is relative to the services node for this device.
#   If it is empty, then it refers to the services node.
#   If specified, the key is created first.
# <value_name> specifies the value to be set within the key
# <value_type> is a string like REG_DWORD.  See below.
# <value> specifies the actual value; its format depends on <value_type>


[Config.percsas]
value=parameters\PnpInterface,5, REG_DWORD,1
value = "", Tag, REG_DWORD, 20
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 注册

本版积分规则

小黑屋|手机版|Archiver|捐助支持|无忧启动 ( 闽ICP备05002490号-1 )

闽公网安备 35020302032614号

GMT+8, 2024-3-28 21:32

Powered by Discuz! X3.3

© 2001-2017 Comsenz Inc.

快速回复 返回顶部 返回列表