无忧启动论坛

 找回密码
 注册
搜索
系统gho:最纯净好用系统下载站广告联系 微信:wuyouceo QQ:184822951
查看: 4185|回复: 5

[讨论] 从archlinux提取的syslinux支持包

[复制链接]
发表于 2016-6-30 16:03:32 | 显示全部楼层 |阅读模式
哪位老大研究下搞定三启?

syslinux.part1.rar

1000 KB, 下载次数: 20, 下载积分: 无忧币 -2

syslinux.part2.rar

862.92 KB, 下载次数: 24, 下载积分: 无忧币 -2

 楼主| 发表于 2016-7-1 00:43:30 来自手机 | 显示全部楼层
关注起来,syslinux搞定efi比grub2强大。
回复

使用道具 举报

 楼主| 发表于 2016-7-1 07:27:17 来自手机 | 显示全部楼层
Create or edit $esp/EFI/syslinux/syslinux.cfg by following #Configuration. Note: The config file for UEFI is $esp/EFI/syslinux/syslinux.cfg, not /boot/syslinux/syslinux.cfg. Files in /boot/syslinux/ are BIOS specific and not related to UEFI Syslinux. Note: When booted in BIOS mode, efibootmgr will not be able to set EFI nvram entry for /efi/syslinux/syslinux.efi. To work around, place resources at the default EFI location: $esp/efi/syslinux/* -> $esp/efi/boot/* and $esp/efi/syslinux/syslinux.efi -> $esp/efi/boot/bootx64.efi
回复

使用道具 举报

 楼主| 发表于 2016-7-1 07:27:52 来自手机 | 显示全部楼层
The Syslinux configuration file, syslinux.cfg, should be created in the same directory where you installed Syslinux. In our case, /boot/syslinux/ for BIOS systems and $esp/EFI/syslinux/ for UEFI systems. The bootloader will look for either syslinux.cfg (preferred) or extlinux.conf Tip: Instead of LINUX, the keyword KERNEL can also be used. KERNEL tries to detect the type of the file, while LINUX always expects a Linux kernel. TIMEOUT value is in units of 0.1 seconds. Examples Note: Any configuration file found in the examples needs to be edited to set the proper kernel parameters. See section #Kernel parameters. Please, pay close attention to the paths. The examples may not be suitable for your installation, especially when using UEFI. Boot prompt This is a simple configuration file that will show a boot: prompt and will automatically boot after 5 seconds. If you want to boot directly without seeing a prompt, set PROMPT to 0. Configuration: /boot/syslinux/syslinux.cfg PROMPT 1 TIMEOUT 50 DEFAULT arch  LABEL arch LINUX ../vmlinuz-linux APPEND root=/dev/sda2 rw INITRD ../initramfs-linux.img  LABEL archfallback LINUX ../vmlinuz-linux APPEND root=/dev/sda2 rw INITRD ../initramfs-linux-fallback.img
回复

使用道具 举报

 楼主| 发表于 2016-7-1 07:29:50 来自手机 | 显示全部楼层
菜单范例
Screenshot_2016-07-01-07-29-13.png
回复

使用道具 举报

发表于 2016-11-23 10:16:28 | 显示全部楼层
老友记!我顶你!
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 注册

本版积分规则

小黑屋|手机版|Archiver|捐助支持|无忧启动 ( 闽ICP备05002490号-1 )

闽公网安备 35020302032614号

GMT+8, 2024-3-29 15:02

Powered by Discuz! X3.3

© 2001-2017 Comsenz Inc.

快速回复 返回顶部 返回列表