无忧启动论坛

 找回密码
 注册
搜索
WEPE笔记本电脑手机维修小包 IT发烧友的必备工具最纯净的「微PE装机优盘」UEPON大师作品卡瑞飞系统和装机二合一超级U盘
无忧启动论坛唯一网址:bbs.wuyou.net系统gho:最纯净好用系统下载站广告联系 QQ:184822951 微信:wuyouceo
楼主: hilsonma

[分享] 我的启动U盘(uefi+bios+wepe骨版,独剑三分区脚本简化制作)

    [复制链接]
发表于 2019-5-28 03:20:40 | 显示全部楼层

1- it does not create EFI partition . is it possible if i want to make an EFI partition of 8 GB ?
2- it does not convert main DATA partiition to NTFS at the end.
3- i had to add ( --force ) to fbinst parameter , after that it formatted successfully .

Thank you for your time ,

It give these errors while formatting .
回复

使用道具 举报

发表于 2019-5-28 03:20:51 | 显示全部楼层

1- it does not create EFI partition . is it possible if i want to make an EFI partition of 8 GB ?
2- it does not convert main DATA partiition to NTFS at the end.
3- i had to add ( --force ) to fbinst parameter , after that it formatted successfully .

Thank you for your time ,

It give these errors while formatting .
2019-05-28_001454.png
回复

使用道具 举报

 楼主| 发表于 2019-5-28 05:51:43 | 显示全部楼层
1- it does not create EFI partition . is it possible if i want to make an EFI partition of 8 GB ?
FAT16 partition can only be up to 2GB. Big wim file should be in data partition. Big EFI partition is not recommended.
2- it does not convert main DATA partiition to NTFS at the end.
The script does not support this function. You should convert manually. And exFAT for udisk is recommended.
3- i had to add ( --force ) to fbinst parameter , after that it formatted successfully .
There should be sth not in order. A single fat32/ntfs partition udisk is required for this script. You can do the job without this script.
Use fbinsttool to make a ud partition and to copy files.
Use diskgenius to make an efi partition and to copy files.

点评

Dear Sir, i have manually created a 800MB UD area , with commandline fbinst , i dont use fbinsttool . also manually created a 8GB EFI FAT32 partition , because i have many WIM files and other efi t  详情 回复 发表于 2019-5-28 23:59
回复

使用道具 举报

发表于 2019-5-28 12:29:24 | 显示全部楼层
hilsonma 发表于 2019-5-27 12:41
20190527更新:
UEFI平台开机菜单改用grub2菜单,实现wim镜像和efi文件自动列表,一键启动。

三分区工具取得重大突破,恭喜恭喜!!!
回复

使用道具 举报

发表于 2019-5-28 23:59:25 | 显示全部楼层
hilsonma 发表于 2019-5-28 05:51
FAT16 partition can only be up to 2GB. Big wim file should be in data partition. Big EFI partition i ...

Dear Sir,

i have manually created a 800MB UD area , with commandline fbinst , i dont use fbinsttool . also manually created a 8GB EFI FAT32 partition , because i have many WIM files and other efi tools , like acronis etc . remaining is DATA partition .

same is possible with this tool . by Zdz1210

http://bbs.wuyou.net/forum.php?mod=viewthread&tid=410621

i thought may be it is possible with cmd file too.

thanks

点评

You can create an 800MB ud with the script by change to and an 8GB esp by change to But I don't recommend to like this. You can put wim files into a folder in data partition. And put  详情 回复 发表于 2019-5-29 06:48
回复

使用道具 举报

 楼主| 发表于 2019-5-29 06:48:18 | 显示全部楼层
本帖最后由 hilsonma 于 2019-5-29 07:02 编辑
maanu 发表于 2019-5-28 23:59
Dear Sir,

i have manually created a 800MB UD area , with commandline fbinst , i dont use fbinst ...


You can create an 800MB ud with the script by
change
  1. pa\partassist.exe /hd:%d123% /resize:0 /reduce-left:7 /align
复制代码

to
  1. pa\partassist.exe /hd:%d123% /resize:0 /reduce-left:800 /align
复制代码


and an 8GB esp by
change
  1. pa\partassist.exe /hd:%d123% /resize:0 /reduce-right:200
  2. pa\partassist.exe /hd:%d123% /cre /pri /size:auto /end /fs:fat16 /align /label:EFI
复制代码

to
  1. pa\partassist.exe /hd:%d123% /resize:0 /reduce-right:8GB
  2. pa\partassist.exe /hd:%d123% /cre /pri /size:auto /end /fs:fat32 /align /label:EFI
复制代码

But I don't recommend to do like this.
You can put wim files into a folder in data partition.
And put booting files with a small wim file into esp.
Then just put 2 loaders into ud.

I prefer small ud and esp. They should do efficient booting, not storing.
Just a small wim file should be kept in esp for maintenance.
回复

使用道具 举报

 楼主| 发表于 2019-5-29 16:02:46 | 显示全部楼层
本帖最后由 hilsonma 于 2019-5-29 16:22 编辑
wintoflash 发表于 2019-5-29 15:02
我修改的grub2是支持读ud区的,只需要加入fb这个模块。其实可以考虑把wim都放ud区隐藏起来。不过这样比较麻 ...


ud 可能会成为过去式,仅仅是为了兼容bios.
而且也不必放ud隐藏,放一个维护用的小wim隐藏在esp即可,其他pe和工具就放可见区。
其实不论放ud还是esp还是可见区,bios下g4d或grub2都可以引导,所以没有必要既放esp又放ud.
不论是uefi还是bios,引导的都是esp的极简wim或可见区的wim集合。这是我的做法。

当然,grub2支持ud是好的,ud的隐藏性要比esp高,有人喜欢放wim在ud。只是bios平台和uefi平台各放一个PE我不欣赏,完全可以启动同一个PE的。
而且也没有必要将各类PE合盘隐藏,只要隐藏一个核心就可以了,工具都可以提取外置。要尝试不同风格的PE,将各类PE镜像放同一个文件夹使用自动菜单就可以了。

再次谢谢wintoflash的指导,让我实现了uefi平台的自动菜单。
回复

使用道具 举报

发表于 2019-5-30 04:17:43 | 显示全部楼层
Dear Hilsonma ,

Thank you for writing back, i will play around with your command line suggestions during weekend . and i understand your technique , but i prefer FB's bootloader for BIOS boot ( everything is hidden in UD ) my PE's import pe tools while booting from ud.

but like wintoflash is saying that he is working grub2 to access ud , will it be possible to access those files in UEFI secure mode as well ?

also , if you are interested , i suggest  using shim loader modified by ValidKss ,

https://github.com/ValdikSS/Super-UEFIinSecureBoot-Disk

it auto enroll secure keys , you can also use Linux's Preloader signed by Microsoft with their secure key .

Thank you again.

Regards
Maanu from Pakistan

点评

Hi Maanu, Thank you for your suggestion. I found the shim loader should be the same as i have used. But I have not tested it. You can test it if you have the conditions and tell me the result.  详情 回复 发表于 2019-5-30 10:04
回复

使用道具 举报

发表于 2019-5-30 07:41:51 | 显示全部楼层
谢谢大大更新 越来越好了啊!
回复

使用道具 举报

发表于 2019-5-30 08:33:42 | 显示全部楼层
支持下!
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 注册

本版积分规则

小黑屋|手机版|Archiver|捐助支持|无忧启动 ( 闽ICP备05002490号-1 )

闽公网安备 35020302032614号

GMT+8, 2019-12-7 18:24

Powered by Discuz! X3.3

© 2001-2017 Comsenz Inc.

快速回复 返回顶部 返回列表