U盘量产失败 怎么办啊？？

201094048344

量产前的
---------------- Device 1------------------
  MP Tool Version :  
  INI File Name :  
  Format Date :  
  Flash Part No : Toshiba 43nm D2 MLC
  CE-0, Flash ID=98-D5-94-32-76-54-0B
  CE-1, Flash ID=98-D5-94-32-76-54-0B
  VID : 0x0930
  PID : 0x6544
  Vendor Name = Kingston
  Product Name = DataTraveler 2.0
  Serial Number = 0019B92764CCC97143AF09B5
  Volume Label = NO NAME   
  F/W Version : 0xB0
  ISP Version : V1.27
  Flash R/W Timing : 25ns
  Channel : Byte Mode
  Homogeneous Mode : Off
  HID Function : Disable
  Planes(F/W) : 2
  Pages/Block : 128 pages
  Max Current : 100 mA
  Total Blocks : 4168
  Bad Blocks : 7
  Capacity : 7807888 Sectors, 3997638656 Bytes
                   3903944 KBytes, 3812.45 MBytes, 3.72 GBytes



量产后的
Device 1:0xB0
MP Version:2.162
INI_File_Name:
Random delay 0 msec
[2090 CM]
--- Download MP ISP ---
CE-0, Flash ID=98-D5-94-32-76-54-0B-00
CE-1, Flash ID=98-D5-94-32-76-54-0B-00
Searching SORTING BOARD table ...
--> Not Found
Found BACKUP Table (000000BB-0001)
Found BACKUP Table (0000013B-0002)
  Original Bad Block - 0:0x00E6
  Original Bad Block - 0:0x00E8
  Original Bad Block - 0:0x0233
  Original Bad Block - 1:0x051F
  Original Bad Block - 1:0x06F1
  Original Bad Block - 1:0x0739
  Original Bad Block - 1:0x0777
Defect Table shows 4161 Good blocks, 7 Bad blocks
SafeErase (0,2084)
  Erase failed Block - 0:0:0x00E6
  Erase failed Block - 0:0:0x00E8
  Erase failed Block - 0:0:0x0233
  ---> Max Bad of Plane (2,1)
SafeErase (1,2084)
  Erase failed Block - 1:0:0x051F
  Erase failed Block - 1:0:0x06F1
  Erase failed Block - 1:0:0x0739
  Erase failed Block - 1:0:0x0777
  ---> Max Bad of Plane (0,4)
  ---> Max BAD/DIE = 4
Total good blocks after SCAN: 4161 / 4168, Bad block=7
RootSector=0x3D3D,Sec/Cluster=8, SuperPage=32 ---> Alignment=27
Boot Block=0x0001,0x0002
==> Homogeneous ON
Lun0(7987120), Lun1(329808), Public=7987120, Secure=0, CDROM=329808
Special FE Config = 56-0B-00
(MaxLBA: 007EE800 < 007DA800)
Lun0(7905200), Lun1(329808), Public=7905200, Secure=0, CDROM=329808
Public,Secure,CDROM = 7905200,0,329808
SN=0025869B489BF0A0A98514DB
--- Download ISP Code:C:\TDDOWNLOAD\MP_VER2162_ALL\ISP_CODE\6690_B1-CM_20081204_V302_29E2.BIN---
--- ISP Code installed.
--- Download ISP Code:C:\TDDOWNLOAD\MP_VER2162_ALL\ISP_CODE\6690_B1-CM_20081204_V302_29E2.BIN---
--- ISP Code installed.
=== CM Preformat Done ===
Low Level Format DONE
Store INI/ERROR MSG to Block-0x0001:79.
CDROM image:D:\LUYAFEI.ISO
Total=8235008,CDROM=329808, PublicArea=7905072, SecureArea=0
Create SECURE(CDROM=1,Public=3859 MB,Secure=0 MB)
   Write LBA(0x00789FB0,128) Fail !
### Err: SECURE failed(16413816).


U盘现在识别不到安装要驱动
0字节 RAW文件

201094048344

有什么办法可以补救啊?????

201094048344

我把U盘还原了 请问这个U盘能量产么？？
哪位大哥帮帮我啊？？？

设备名称: [E:]USB Mass Storage Device(Kingston DataTraveler 2.0 USB Device)
PNP设备ID: VID = 0930 PID = 6544
设备序列号: 0025869B489BF0A0AFA514DC
  设备版本: 1.00
  设备类型: 标准USB设备 - USB2.0高速
芯片制造商: Toshiba(东芝)
  芯片型号: SK6211BB/TC58NC6686G1F
产品制造商: Kingston
  产品型号: DataTraveler 2.0



cardinfo
---------------- Device 1------------------
  MP Tool Version :  
  INI File Name :  
  Format Date :  
  Flash Part No : Toshiba 43nm D2 MLC
  CE-0, Flash ID=98-D5-94-32-76-54-0B
  CE-1, Flash ID=98-D5-94-32-76-54-0B
  VID : 0x0930
  PID : 0x6544
  Vendor Name = Kingston
  Product Name = DataTraveler 2.0
  Serial Number = 0019B92764CCC97143AF09B5
  Volume Label = NO NAME   
  F/W Version : 0xB0
  ISP Version : V1.27
  Flash R/W Timing : 25ns
  Channel : Byte Mode
  Homogeneous Mode : Off
  HID Function : Disable
  Planes(F/W) : 2
  Pages/Block : 128 pages
  Max Current : 100 mA
  Total Blocks : 4168
  Bad Blocks : 7
  Capacity : 7807888 Sectors, 3997638656 Bytes
                   3903944 KBytes, 3812.45 MBytes, 3.72 GBytes

jjsfm

这个盘不能量产CD-ROM。

201094048344

悲剧啊！！   怎么不能量产啊？？
我的U盘还原后怎么容量变大了啊？ 原来是3.72G  现在是3.92G了

2010xiaodmeon

不是变大了，是量产工具将U盘的容量虚拟大了，其实你U盘真正的容量还是那么大，不信楼主可以尝试一下