[分享]Welcome to Windows Setup

我是神仙

看看有什么帮助？

Welcome to Windows Setup
  Press ENTER to continue
     Press F3 to Exit
    (   
Windows Setup
=============
    <   Setup failed. Press any key to restart your computer.
(   Setup is loading files (%s)...
    0   Other (requires an OEM driver diskette)
      Enter=Select  F3=Exit
,   Enter=Continue  Esc=Cancel  F3=Exit
   4   Manufacturer-supplied hardware support disk
   d   Please insert the disk labeled

         into Drive A:
*  Press ENTER when ready.
   8  +====================================================+
|  Windows is not completely set up on your          |
|  system. If you quit Setup now, you will need      |
|  to run Setup again to set up Windows.             |
|                                                    |
|     * Press ENTER to continue Setup.               |
|     * Press F3 to quit                             |
|----------------------------------------------------|
|  F3=Exit  Enter=Continue                           |
+====================================================+
        Enter=Continue  F3=Exit
   H   
Setup is inspecting your computer';s hardware configuration...
   Windows Executive
&#36;   Hardware Abstraction Layer
    &#36;   Windows Processor Extensions
  &#36;   Windows Configuration Data
       Locale-Specific Data
     Setup Font
       Windows Setup
   Floppy Disk Driver
       Keyboard Driver
      SCSI Port Driver
     Video Driver
  0   Press any key to restart your computer.
   \   An unexpected error (%d) occurred at
line %d in %s.
Press any key to continue.
    T   Only %d floppy drives were found,
the system was trying to find drive %d.
    @   The system has run out of memory at
line %d in file %s
   <   The system encountered an I/O error
accessing %s.
    ,   Section %s of the INF file is invalid
,   Line %d of the INF file %s is invalid
4   INF file %s is corrupt or missing, status %d.
<   File %s could not be loaded.
The error code is %d
    T   The entry "%s" in the [%s] section
of the INF file is corrupt or missing.
       Please wait...
    4   Setup cannot continue. Press any key to exit.
    Select the SCSI Adapter you want from the following list, or select "Other"
if you have a device support disk provided by an adapter manufacturer.
    You have chosen to configure a SCSI Adapter for use with Windows,
using a device support disk provided by an adapter manufacturer.
Select the SCSI Adapter you want from the following list, or press ESC
to return to the previous screen.
    P
  Setup could not determine the type of computer you have, or you have
chosen to manually specify the computer type.
Select the computer type from the following list, or select "Other"
if you have a device support disk provided by your computer manufacturer.
To scroll through the menu items press up arrow or down arrow.
4
  You have chosen to configure a computer for use with Windows,
using a device support disk provided by the computer';s manufacturer.
Select the computer type from the following list, or press ESC
to return to the previous screen.
To scroll through the menu items press up arrow or down arrow.
     Setup could not determine the type of video adapter installed in the system.
Select the video Adapter you want from the following list, or select "Other"
if you have a device support disk provided by an adapter manufacturer.
       You have chosen to configure a video Adapter for use with Windows,
using a device support disk provided by an adapter manufacturer.
Select the video Adapter you want from the following list, or press ESC
to return to the previous screen.
  `   File %s caused an unexpected error (%d) at
line %d in %s.
Press any key to continue.
  @   The file %s is corrupted.
Press any key to continue.
   H   An I/O error occurred on file %s.
Press any key to continue.
   D   The file %s could not be found.
Press any key to continue.
@   Insufficient memory for %s.
Press any key to continue.
(   SETUPLDR: Couldn';t open drive %s
  H   
Setup is inspecting your computer';s hardware configuration...
   NTDETECT failed
      Windows has not been installed.
If there is a floppy disk inserted in drive A:, remove it.
Press ENTER to restart your computer.
    P   Windows has not been installed.
Press ENTER to restart your computer.
      Enter=Restart Computer
    h   Setup could not find any drivers associated with your selection.
Press any key to continue.
    l   The disk you have supplied does not provide any relevant support files.
Press any key to continue.
p   This disk cannot be read because it contains an unrecognized file system.
Press any key to continue.
   p   The entry
"%s"
in the unattended script file doesn';t exist
in the [%s] section of the INF file %s.
L   Press F6 if you need to install a third party SCSI or RAID driver...
     S
@   S=Specify Additional Device   Enter=Continue   F3=Exit
    ?    * To specify additional SCSI adapters, CD-ROM drives, or special
    disk controllers for use with Windows, including those for
    which you have a device support disk from a mass storage device
    manufacturer, press S.
  * If you do not have any device support disks from a mass storage
    device manufacturer, or do not want to specify additional
    mass storage devices for use with Windows, press ENTER.
       Setup could not determine the type of one or more mass storage devices
installed in your system, or you have chosen to manually specify an adapter.
Currently, Setup will load support for the following mass storage devices(s):
   H   Setup will load support for the following mass storage device(s):
    Setup was unable to load support for the mass storage device you specified.
Currently, Setup will load support for the following mass storage devices(s):
       <none>
       <unnamed adapter>
    Other
4   Windows requires an 80486 or later processor.
     Plug & Play Export Driver
     PCI IDE Extensions Driver
d   Windows could not start because of the following ARC
firmware boot configuration problem :
   <   The ';osloadpartition'; parameter setting is invalid.
      Please check the Windows documentation about ARC configuration
options and your hardware reference manuals for additional
information.
      Network Adapter Driver
       TCP/IP Service
    &#36;   WINS Client(TCP/IP) Service
       MRXSMB mini-redirector
       UNC Filesystem
       NDIS Driver
       SMB Redirector Filesystem
    The network boot card in your computer has an older version
of ROM and cannot be used to remotely install Windows.
Contact your system administrator or computer manufacturer
for information about upgrading the ROM.
    The operating system image you selected does not contain the
necessary drivers for your network adapter. Try selecting a
different operating system image. If the problem persists,
contact your system administrator.
   IP Security Service
       Windows Recovery Console
      Setup is starting Windows
&#36;   Machine Identification Data
       Kernel Security Service
   ?  Your system';s PROM (firmware) is below the required revision level.
Please contact SGI customer support or visit the SGI web site to obtain
the PROM update and upgrade instructions.
Note: you can boot previous installations of Microsoft(R) Windows(R)
by selecting the appropriate boot entry in the startup menu rather
than the current default "Windows Setup" boot entry.
      Setup either detected multiple disks in your machine that are
indistinguishable or detected raw disk(s). Setup has corrected the problem,
but a reboot is required.
   Kernel Debugger DLL
      %s
Windows already has a driver that you can use for
"%s".
Unless the device manufacturer prefers that you use the driver on the
floppy disk, you should use the driver in Windows.
   H   S=Use the driver on floppy Enter=Use the default Windows driver
   T   The driver you provided seems to be newer than the Windows
default driver.
   T   The driver you provided seems to be older than the Windows
default driver.
   ,   Starting Windows Recovery Console...
  (   NTDETECT Checking Hardware ...
    <   Press F2 to run Automated System Recovery (ASR)...
               Please insert the disk labeled:

    Windows Automated System Recovery Disk

            into the floppy drive.

          Press any key when ready.
       Windows requires certain processor features that are not available
on the processor in this computer.   Specifically, Windows requires
the following instructions.
    CPUID
    CMPXCHG8B
  H   Preparing for Automated System Recovery, press ESC to cancel...
   4   Starting Windows Automated System Recovery...
   Mouse Driver
      Starting Windows Setup...
L   The file ASRPNP.SIF on the Automated System Recovery disk is invalid
  4   Starting Windows Preinstall Environment...
    ,   
Uninstall is checking hardware...
,   Starting Windows Uninstallation...
       Setup could not find a floppy drive on your machine to load
OEM drivers from floppy disk.
    * Press ESC to cancel loading OEM drivers
   
    * Press F3 to quit setup.
  `
  This computer is already in the process of being upgraded to Microsoft
Windows. What do you want to do ?
    * To continue the current upgrade, press ENTER.
    * To cancel the current upgrade and install new version of
      Microsoft Windows, press F10.
    * To exit Setup without installing Microsoft Windows,
      press F3.
   &#36;   Driver Identification Data
    L   Setup failed to load the OEM drivers.
Press any key to continue.
      EMS Support
      FAT File System
      >
   =
L   Windows could not start due to an error while booting from a RAMDISK.
@   The RAMDISK options specified in boot.ini are invalid.
    8   Windows failed to build a bootable RAMDISK image.
0   Windows failed to open the RAMDISK image.
(   Searching for a build server...
   8   Requesting a bootable image from build server...
  @   Build Server IP = %d.%d.%d.%d. Last request timed out.  
  @   Build Server IP = %d.%d.%d.%d. Last request is pending.  
@   Build Server IP = %d.%d.%d.%d. Last request failed.     
  (   Build Server IP = %d.%d.%d.%d.
        Loading RAMDISK image...
  (   TFTP download from %d.%d.%d.%d
    4   Multicast TFTP download from %d.%d.%d.%d:%d.