找回密码
 注册
搜索
系统gho:最纯净好用系统下载站投放广告、加入VIP会员,请联系 微信:wuyouceo
查看: 259|回复: 13

[求助] iVentoy 情况

[复制链接]
发表于 3 小时前 | 显示全部楼层 |阅读模式

如果这里选了第一个,它会成为DHCP服务器,终端可以分配到IP  也可以正常使用,但是我们内网已经有DHCP服务器,怕冲突。。如果选了下面两个,终端就找不到这个PXE服务器了,
发表于 3 小时前 来自手机 | 显示全部楼层
不会冲突,pxe的dhcp和路由器的DHCP两回事。

点评

我看官方文档里 好像是选下面两个,可以沿用用来的DHCP服务器的,不知道理解对不对  详情 回复 发表于 2 小时前
回复

使用道具 举报

 楼主| 发表于 2 小时前 | 显示全部楼层
窄口牛 发表于 2026-3-30 14:22
不会冲突,pxe的dhcp和路由器的DHCP两回事。

我看官方文档里  好像是选下面两个,可以沿用用来的DHCP服务器的,不知道理解对不对

点评

这就不知道了,我没有玩过这个 我只是知道pxe的dhcp和路由器的dhcp无关。  详情 回复 发表于 2 小时前
回复

使用道具 举报

发表于 2 小时前 | 显示全部楼层
shb110119 发表于 2026-3-30 14:25
我看官方文档里  好像是选下面两个,可以沿用用来的DHCP服务器的,不知道理解对不对 ...

这就不知道了,我没有玩过这个
我只是知道pxe的dhcp和路由器的dhcp无关。

点评

那有没有哪个PXE的软件 配置比较简单 可以沿用原来的DHCP服务器的软件 在WIN下可以直接启动的? 方便推一个么。。 我的环境由于 IP-MAC是绑定的 如果iVentoy开了DHCP ,客户端得到的IP和绑定的不一致,数据无法  详情 回复 发表于 2 小时前
回复

使用道具 举报

发表于 2 小时前 | 显示全部楼层
没搞过这个,看大佬们分析
回复

使用道具 举报

 楼主| 发表于 2 小时前 | 显示全部楼层
窄口牛 发表于 2026-3-30 14:30
这就不知道了,我没有玩过这个
我只是知道pxe的dhcp和路由器的dhcp无关。

那有没有哪个PXE的软件 配置比较简单  可以沿用原来的DHCP服务器的软件  在WIN下可以直接启动的?  方便推一个么。。
我的环境由于  IP-MAC是绑定的  如果iVentoy开了DHCP ,客户端得到的IP和绑定的不一致,数据无法正常通过交换机,启动会卡住的,如果这时候再去改绑定,操作就比较麻烦,完全抵消了网启的优势 。。
回复

使用道具 举报

发表于 1 小时前 | 显示全部楼层
你可以临时换个其他交换机,断开原来的网络进行克隆,施工完成后再接回去。

点评

机房的线是蜘蛛网  详情 回复 发表于 1 小时前
回复

使用道具 举报

 楼主| 发表于 1 小时前 | 显示全部楼层
窄口牛 发表于 2026-3-30 15:25
你可以临时换个其他交换机,断开原来的网络进行克隆,施工完成后再接回去。 ...

机房的线是蜘蛛网  
回复

使用道具 举报

发表于 1 小时前 | 显示全部楼层
你可以简单描述下你环境的组网情况。
1、你们的DHCP Server的IP 地址
2、iVentoy运行的机器的IP地址
3、客户端分到的IP地址。
4、客户端报错的截图。
5、iVentoy端的log

点评

你可以简单描述下你环境的组网情况。 组网比较简单,一个华为防火墙 当网关,也是DHCP服务器 下面接了交换机 交换机做了IP-MAC绑定 如果IP和MAC关系不对,数据过不了交换机,但是DHCP可以下发 1、你们的DHCP  详情 回复 发表于 1 小时前
回复

使用道具 举报

发表于 1 小时前 | 显示全部楼层
记住已亮的插口,将你要施工的机器全部断电,那些灭了的就是你要施工的,就可以取下来接到另外的交换机了。
干活要打开思路,多想想,就能简单化解决。
回复

使用道具 举报

发表于 1 小时前 | 显示全部楼层
是否有多段网??用路由器或DHCP隔开的,如果全网只有一个路由器就是选第2个,我这里成功了,哈哈,

点评

没有,你是直接改了第二个就可以了, 路由器上还要不要配置?  详情 回复 发表于 1 小时前
回复

使用道具 举报

 楼主| 发表于 1 小时前 | 显示全部楼层
longpanda 发表于 2026-3-30 15:42
你可以简单描述下你环境的组网情况。
1、你们的DHCP Server的IP 地址
2、iVentoy运行的机器的IP地址

你可以简单描述下你环境的组网情况。
组网比较简单,一个华为防火墙  当网关,也是DHCP服务器   下面接了交换机 交换机做了IP-MAC绑定    如果IP和MAC关系不对,数据过不了交换机,但是DHCP可以下发

1、你们的DHCP Server的IP 地址   186.168.2.1

2、iVentoy运行的机器的IP地址   186.168.2.174
3、客户端分到的IP地址。     这个在PXE启动阶段看不到  进到WIN下 会分配到186.168.2.117  

4、客户端报错的截图。、

1.jpg

   2.jpg

上张图在那边转圈圈,,转了很久,就到这张,然后就重启了

5、iVentoy端的log


  1. 2026/03/30 15:51:52.742 [PXE]  ==========================================================
  2. 2026/03/30 15:51:52.743 [PXE]  ##########################################################
  3. 2026/03/30 15:51:52.743 [PXE]  ##################### IVENTOY RUN ########################
  4. 2026/03/30 15:51:52.743 [PXE]  ##########################################################
  5. 2026/03/30 15:51:52.743 [PXE]  ==========================================================
  6. 2026/03/30 15:51:52.753 [PXE]  ##################### IVENTOY [Windows 64] ################
  7. 2026/03/30 15:51:52.753 [PXE]  system cpu core number: 4
  8. 2026/03/30 15:51:52.753 [PXE]  Module <Log> init start ...
  9. 2026/03/30 15:51:52.753 [PXE]  Module <Log> init OK ...
  10. 2026/03/30 15:51:52.753 [PXE]  Module <Plat> init start ...
  11. 2026/03/30 15:51:52.758 [PXE]  NIC:<Intel(R) Ethernet Connection I217-LM> Type:6
  12. 2026/03/30 15:51:52.758 [PXE]  IP=<186.168.2.174> Mask=<255.255.255.0>
  13. 2026/03/30 15:51:52.758 [PXE]  Gateway list <186.168.2.1>
  14. 2026/03/30 15:51:52.758 [PXE]  Find Gateway <186.168.2.1>
  15. 2026/03/30 15:51:52.758 [PXE]  Before nic name not found, now add new
  16. 2026/03/30 15:51:52.758 [PXE]  Module <Plat> init OK ...
  17. 2026/03/30 15:51:52.758 [PXE]  Module <Cfg> init start ...
  18. 2026/03/30 15:51:52.758 [PXE]  Module <Cfg> init OK ...
  19. 2026/03/30 15:51:52.758 [PXE]  Module <MAC> init start ...
  20. 2026/03/30 15:51:52.758 [PXE]  mac addr db init ...
  21. 2026/03/30 15:51:52.862 [PXE]  mac addr db init OK, total 49002 records
  22. 2026/03/30 15:51:52.862 [PXE]  Module <MAC> init OK ...
  23. 2026/03/30 15:51:52.862 [PXE]  Module <Tarfs> init start ...
  24. 2026/03/30 15:51:52.910 [PXE]  iventoy.dat <8035648> <15042560> <e5122f1a>
  25. 2026/03/30 15:51:53.229 [PXE]  Extract iventoy.dat success.
  26. 2026/03/30 15:51:53.229 [PXE]  ======= iVentoy 1.0.20 ========
  27. 2026/03/30 15:51:53.229 [PXE]  tarfs find 179 files
  28. 2026/03/30 15:51:53.229 [PXE]  Module <Tarfs> init OK ...
  29. 2026/03/30 15:51:53.229 [PXE]  Module <OS> init start ...
  30. 2026/03/30 15:51:53.229 [PXE]  cpio buf:0000026BDE36BA40 len:4407296 fixoff:4406800
  31. 2026/03/30 15:51:53.230 [PXE]  Module <OS> init OK ...
  32. 2026/03/30 15:51:53.230 [PXE]  Module <IMG> init start ...
  33. 2026/03/30 15:51:53.230 [PXE]  Scan iso directory for all image files ...
  34. 2026/03/30 15:51:53.232 [PXE]  Add ISO <iso/cn_windows_10_multi-edition_vl_version_1709_updated_sept_2017_x64_dvd_100090774.iso> size:4630972416 type:1
  35. 2026/03/30 15:51:53.233 [PXE]  Add ISO <iso/FirPE-V2.1.1.iso> size:1218586624 type:0
  36. 2026/03/30 15:51:53.234 [PXE]  Add ISO <iso/WePE_64_V2.3.iso> size:478414848 type:1
  37. 2026/03/30 15:51:53.234 [PXE]  [2] Phase1 parse image <iso/FirPE-V2.1.1.iso> <ISO> 0 starting...
  38. 2026/03/30 15:51:53.234 [PXE]  [1] Phase1 parse image <iso/cn_windows_10_multi-edition_vl_version_1709_updated_sept_2017_x64_dvd_100090774.iso> <UDF> 1 starting...
  39. 2026/03/30 15:51:53.235 [PXE]  [3] Phase1 parse image <iso/WePE_64_V2.3.iso> <UDF> 1 starting...
  40. 2026/03/30 15:51:53.235 [PXE]  [2] img <iso/FirPE-V2.1.1.iso> <ISO> OS type:WinPE
  41. 2026/03/30 15:51:53.235 [PXE]  [2] collect wim files for <iso/FirPE-V2.1.1.iso> ...
  42. 2026/03/30 15:51:53.235 [PXE]  [2] collect wim files finished.
  43. 2026/03/30 15:51:53.235 [PXE]  [2] Phase1 parse image <iso/FirPE-V2.1.1.iso> finished success
  44. 2026/03/30 15:51:53.240 [PXE]  [3] No boot.wim found.
  45. 2026/03/30 15:51:53.240 [PXE]  [3] img <iso/WePE_64_V2.3.iso> <UDF> OS type:WinPE
  46. 2026/03/30 15:51:53.240 [PXE]  [3] collect wim files for <iso/WePE_64_V2.3.iso> ...
  47. 2026/03/30 15:51:53.240 [PXE]  [3] Find in /efi/microsoft/boot/bcd ...
  48. 2026/03/30 15:51:53.240 [PXE]  [3] Find wim flag:</WEPE/WEPE64.WIM>
  49. 2026/03/30 15:51:53.240 [PXE]  [3] Find wim flag:</WEPE/WEPE64.WIM>
  50. 2026/03/30 15:51:53.240 [PXE]  [3] wim </WEPE/WEPE64.WIM> already exist
  51. 2026/03/30 15:51:53.240 [PXE]  [3] Find wim flag:</WEPE/WEPE64.WIM>
  52. 2026/03/30 15:51:53.240 [PXE]  [3] wim </WEPE/WEPE64.WIM> already exist
  53. 2026/03/30 15:51:53.240 [PXE]  [3] Find wim flag:</WEPE/WEPE64.WIM>
  54. 2026/03/30 15:51:53.240 [PXE]  [3] wim </WEPE/WEPE64.WIM> already exist
  55. 2026/03/30 15:51:53.240 [PXE]  [3] [WIM 0] /WEPE/WEPE64.WIM [Seek:256874496  Size:219880538  RecSeek:0]
  56. 2026/03/30 15:51:53.240 [PXE]  [3] collect wim files finished.
  57. 2026/03/30 15:51:53.240 [PXE]  [3] Phase1 parse image <iso/WePE_64_V2.3.iso> finished success
  58. 2026/03/30 15:51:53.437 [PXE]  [1] This is standard Windows ISO.
  59. 2026/03/30 15:51:53.437 [PXE]  [1] img <iso/cn_windows_10_multi-edition_vl_version_1709_updated_sept_2017_x64_dvd_100090774.iso> <UDF> OS type:Windows
  60. 2026/03/30 15:51:53.438 [PXE]  [1] collect wim files for <iso/cn_windows_10_multi-edition_vl_version_1709_updated_sept_2017_x64_dvd_100090774.iso> ...
  61. 2026/03/30 15:51:53.438 [PXE]  [1] Find in /efi/microsoft/boot/bcd ...
  62. 2026/03/30 15:51:53.438 [PXE]  [1] Find wim flag:</sources/boot.wim>
  63. 2026/03/30 15:51:53.438 [PXE]  [1] Find wim flag:</sources/boot.wim>
  64. 2026/03/30 15:51:53.438 [PXE]  [1] wim </sources/boot.wim> already exist
  65. 2026/03/30 15:51:53.438 [PXE]  [1] Find in /boot/bcd ...
  66. 2026/03/30 15:51:53.438 [PXE]  [1] Find wim flag:</sources/boot.wim>
  67. 2026/03/30 15:51:53.438 [PXE]  [1] wim </sources/boot.wim> already exist
  68. 2026/03/30 15:51:53.438 [PXE]  [1] Find wim flag:</sources/boot.wim>
  69. 2026/03/30 15:51:53.438 [PXE]  [1] wim </sources/boot.wim> already exist
  70. 2026/03/30 15:51:53.438 [PXE]  [1] [WIM 0] /sources/boot.wim [Seek:20023296  Size:382344825  RecSeek:0]
  71. 2026/03/30 15:51:53.438 [PXE]  [1] collect wim files finished.
  72. 2026/03/30 15:51:53.438 [PXE]  [1] Phase1 parse image <iso/cn_windows_10_multi-edition_vl_version_1709_updated_sept_2017_x64_dvd_100090774.iso> finished success
  73. 2026/03/30 15:51:53.439 [PXE]  ================= PXE IMG DUMP =================
  74. 2026/03/30 15:51:53.439 [PXE]  [1] <cn_windows_10_multi-edition_vl_version_1709_updated_sept_2017_x64_dvd_100090774.iso> <4630972416> <UDF> <Windows> <Wim:0/1>
  75. 2026/03/30 15:51:53.439 [PXE]  [2] <FirPE-V2.1.1.iso> <1218586624> <ISO> <WinPE> <Wim:0/0>
  76. 2026/03/30 15:51:53.439 [PXE]  [3] <WePE_64_V2.3.iso> <478414848> <UDF> <WinPE> <Wim:0/1>
  77. 2026/03/30 15:51:53.439 [PXE]  ================================================
  78. 2026/03/30 15:51:53.439 [PXE]  Module <IMG> init OK ...
  79. 2026/03/30 15:51:53.439 [PXE]  Module <DHCP> init start ...
  80. 2026/03/30 15:51:53.439 [PXE]  Module <DHCP> init OK ...
  81. 2026/03/30 15:51:53.439 [PXE]  Module <TFTP> init start ...
  82. 2026/03/30 15:51:53.439 [PXE]  Module <TFTP> init OK ...
  83. 2026/03/30 15:51:53.439 [PXE]  Module <HTTP> init start ...
  84. 2026/03/30 15:51:53.448 [HTTP] HTTP API service is running on 0.0.0.0:26000 ...
  85. 2026/03/30 15:51:53.448 [PXE]  EnableWindow open link button
  86. 2026/03/30 15:51:53.508 [PXE]  Module <HTTP> init OK ...
  87. 2026/03/30 15:51:53.508 [PXE]  Module <NBD> init start ...
  88. 2026/03/30 15:51:53.513 [PXE]  Module <NBD> init OK ...
  89. 2026/03/30 15:51:53.513 [PXE]  <535735305a57776f55696b67513239795a53685554536b67615455744e4455354d434244554655675143417a4c6a4d7752306836>
  90. 2026/03/30 15:51:53.513 [PXE]  <4f5759774d546c6b597a68684f4445354d54466c4e546b774f446b7859544978595749794e44457a4d44413d>
  91. 2026/03/30 15:51:53.513 [PXE]  b43b842032f44343e2b47789f0824e8a1f1930e0612f59138580eef3f39d8157
  92. 2026/03/30 15:51:53.513 [PXE]  ====================== SYSTEM IP LIST ===================================
  93. 2026/03/30 15:51:53.513 [PXE]   [1] 186.168.2.174     255.255.255.0     186.168.2.1       Intel(R) Ethernet Connection I217-LM
  94. 2026/03/30 15:51:53.513 [PXE]  =========================================================================
  95. 2026/03/30 15:51:53.513 [PXE]  PXE cofigure recovery ...
  96. 2026/03/30 15:51:53.514 [PXE]  data/config.dat is valid, now recover data ...
  97. 2026/03/30 15:51:53.514 [PXE]  Recover: dhcp server mode 0
  98. 2026/03/30 15:51:53.514 [PXE]  Recover: boot background mode 0
  99. 2026/03/30 15:51:53.514 [PXE]  Recover: efi boot file 0
  100. 2026/03/30 15:51:53.514 [PXE]  Recover: boot resolution 1024 x 768
  101. 2026/03/30 15:51:53.514 [PXE]  Recover default image [2] <iso/FirPE-V2.1.1.iso> timeout:[0]
  102. 2026/03/30 15:51:53.514 [PXE]  Recover: ip:186.168.2.174 mask:255.255.255.0 gateway:186.168.2.1 pool:[186.168.2.200-186.168.2.219]
  103. 2026/03/30 15:51:53.514 [PXE]  Recover: HTTP port:16000 NBD port:10809 TFTP timeout:5 TFTP max-retransmit:3
  104. 2026/03/30 15:51:53.514 [DHCP] Recover dhcp db MAC:40-8d-5c-b8-08-c6 IP:186.168.2.201
  105. 2026/03/30 15:51:53.514 [PXE]  Recover filter [deny] mode
  106. 2026/03/30 15:51:53.514 [PXE]  =============== PXE cofigure recovery finished ===============
  107. 2026/03/30 15:51:53.540 [PXE]  link button already enabled, no need to dissable.
  108. 2026/03/30 15:51:54.758 [HTTP] API request: <{"method":"sysinfo"}>
  109. 2026/03/30 15:51:54.807 [HTTP] API request: <{"method":"sys_ip_list"}>
  110. 2026/03/30 15:51:54.814 [HTTP] API request: <{"method":"get_dhcp_mode"}>
  111. 2026/03/30 15:51:56.613 [HTTP] API request: <{"method":"get_config_all"}>
  112. 2026/03/30 15:51:59.024 [HTTP] API request: <{"method":"set_dhcp_mode","dhcp_mode":1}>
  113. 2026/03/30 15:51:59.819 [HTTP] API request: <{"method":"set_config","tftp_timeout":5,"tftp_maxretrans":3,"http_port":16000,"nbd_port":10809}>
  114. 2026/03/30 15:51:59.824 [HTTP] API request: <{"method":"get_config_all"}>
  115. 2026/03/30 15:52:00.843 [HTTP] API request: <{"method":"sys_ip_list"}>
  116. 2026/03/30 15:52:00.850 [HTTP] API request: <{"method":"get_dhcp_mode"}>
  117. 2026/03/30 15:52:04.093 [HTTP] API request: <{"method":"start_server","ip":"186.168.2.174","mask":"255.255.255.0","gw":"186.168.2.1","pool_begin":"186.168.2.200","pool_end":"186.168.2.219","dns_server":""}>
  118. 2026/03/30 15:52:04.093 [PXE]  Update Mask[255.255.255.0 --> 255.255.255.0] GW[186.168.2.1 --> 186.168.2.1]
  119. 2026/03/30 15:52:04.094 [PXE]  iVentoy service is starting ...
  120. 2026/03/30 15:52:04.095 [PXE]  [1] Phase2 parse image <iso/cn_windows_10_multi-edition_vl_version_1709_updated_sept_2017_x64_dvd_100090774.iso> <UDF> starting...
  121. 2026/03/30 15:52:04.095 [PXE]  [2] Phase2 parse image <iso/FirPE-V2.1.1.iso> <ISO> starting...
  122. 2026/03/30 15:52:04.095 [PXE]  [2] locate wim data (wims:0) ...
  123. 2026/03/30 15:52:04.095 [PXE]  [3] Phase2 parse image <iso/WePE_64_V2.3.iso> <UDF> starting...
  124. 2026/03/30 15:52:04.095 [PXE]  [3] locate wim data (wims:1) ...
  125. 2026/03/30 15:52:04.096 [PXE]  [2] ExtraBuf totlen:934296 tool:933104 autonum:0 injectlen:0
  126. 2026/03/30 15:52:04.096 [PXE]  [2] windows locate wim finish
  127. 2026/03/30 15:52:04.096 [PXE]  [2] Windows virt data new <WinPE> ...
  128. 2026/03/30 15:52:04.096 [PXE]  [2] ISO fill override data sector(595013) ...
  129. 2026/03/30 15:52:04.096 [PXE]  [2] Virt data ISO file size: 1218586624 1218586624
  130. 2026/03/30 15:52:04.096 [PXE]  [2] ================ OVERRIDE DUMP ================
  131. 2026/03/30 15:52:04.096 [PXE]  [2] ================ OVERRIDE DUMP ================
  132. 2026/03/30 15:52:04.096 [PXE]  [2] ================ VIRT RANGE DUMP ================
  133. 2026/03/30 15:52:04.096 [PXE]  [2]  <iso/FirPE-V2.1.1.iso> WIM:0/0
  134. 2026/03/30 15:52:04.096 [PXE]  [2] ================ VIRT RANGE DUMP ================
  135. 2026/03/30 15:52:04.096 [PXE]  [2] Phase2 parse image <iso/FirPE-V2.1.1.iso> finished success
  136. 2026/03/30 15:52:04.096 [PXE]  [3] ExtraBuf totlen:934296 tool:933104 autonum:0 injectlen:0
  137. 2026/03/30 15:52:04.096 [PXE]  [3] @@ locate wim file </WEPE/WEPE64.WIM> ...
  138. 2026/03/30 15:52:04.096 [PXE]  [3] @@@ overlen=8 overoff=3639528 fe_entry_size_offset=3639352 start_block=304 file_offset=256874496
  139. 2026/03/30 15:52:04.098 [PXE]  [1] is Windows10+
  140. 2026/03/30 15:52:04.098 [PXE]  [1] Patch BCD file for Windows10+
  141. 2026/03/30 15:52:04.099 [PXE]  [3] 105204 397008 chunk_num=13
  142. 2026/03/30 15:52:04.100 [PXE]  [1] Patch BIOS BCD file success
  143. 2026/03/30 15:52:04.100 [PXE]  [1] Patch UEFI BCD file success
  144. 2026/03/30 15:52:04.100 [PXE]  [1] locate wim data (wims:1) ...
  145. 2026/03/30 15:52:04.100 [PXE]  [3] last chunk_size:1192 decompresslen:3792 tot:397008
  146. 2026/03/30 15:52:04.100 [PXE]  [3] read lookup offset:219797850 size:80650
  147. 2026/03/30 15:52:04.100 [PXE]  [1] ExtraBuf totlen:934296 tool:933104 autonum:0 injectlen:0
  148. 2026/03/30 15:52:04.100 [PXE]  [1] @@ locate wim file </sources/boot.wim> ...
  149. 2026/03/30 15:52:04.101 [PXE]  [3] search pecmd.exe 0000026BDD2C5040
  150. 2026/03/30 15:52:04.101 [PXE]  [3] search reg SYSTEM 0000026BDD2D1D30
  151. 2026/03/30 15:52:04.101 [PXE]  [3] find system lookup entry_id:509 raw_size:7602176
  152. 2026/03/30 15:52:04.101 [PXE]  [1] @@@ overlen=8 overoff=2656488 fe_entry_size_offset=2656312 start_block=304 file_offset=20023296
  153. 2026/03/30 15:52:04.102 [HTTP] API request: <{"method":"query_status"}>
  154. 2026/03/30 15:52:04.105 [PXE]  [1] 956768 4800688 chunk_num=147
  155. 2026/03/30 15:52:04.107 [PXE]  [3] 1156620 7602176 chunk_num=232
  156. 2026/03/30 15:52:04.114 [PXE]  [1] last chunk_size:4702 decompresslen:16560 tot:4800688
  157. 2026/03/30 15:52:04.114 [PXE]  [1] read lookup offset:381851187 size:489650
  158. 2026/03/30 15:52:04.116 [PXE]  [1] search pecmd.exe 0000000000000000
  159. 2026/03/30 15:52:04.116 [PXE]  [1] search winpeshl.exe 0000026BE15CEBE8
  160. 2026/03/30 15:52:04.116 [PXE]  [1] find replace file at 0000026BE15CEBE8
  161. 2026/03/30 15:52:04.116 [PXE]  [1] search hash <c4ceaca1424333e4132e8cbec63fdf678a31b801>
  162. 2026/03/30 15:52:04.116 [PXE]  [1] find replace lookup entry_id:2513 raw_size:31232
  163. 2026/03/30 15:52:04.116 [PXE]  [1] 13074 31232 chunk_num=1
  164. 2026/03/30 15:52:04.117 [PXE]  [1] last chunk_size:13074 decompresslen:31232 tot:31232
  165. 2026/03/30 15:52:04.117 [PXE]  [1] jump exe </win/vtoypxe64.exe> len:194048 alignlen:194048
  166. 2026/03/30 15:52:04.117 [PXE]  [1] jump_exe_len:194048 bin_raw_len:1159644 bin_align_len:1161216
  167. 2026/03/30 15:52:04.117 [PXE]  [1] windows locate wim finish
  168. 2026/03/30 15:52:04.117 [PXE]  [1] Windows virt data new <Windows> ...
  169. 2026/03/30 15:52:04.117 [PXE]  [1] bootfix.bin data: 80 00 cd 13
  170. 2026/03/30 15:52:04.117 [PXE]  [1] Auto suppress BIOS cdrom prompt
  171. 2026/03/30 15:52:04.117 [PXE]  [1] Auto suppress UEFI cdrom prompt
  172. 2026/03/30 15:52:04.117 [PXE]  [1] UDF fill override data ...
  173. 2026/03/30 15:52:04.117 [PXE]  [1] PdSizeOffset=530624 tagOffset=530432
  174. 2026/03/30 15:52:04.117 [PXE]  [1] UDF tag valid OK, should match it.
  175. 2026/03/30 15:52:04.118 [PXE]  [1] UDF tag refresh OK.
  176. 2026/03/30 15:52:04.118 [PXE]  [1] ## virt wim file </sources/boot.wim> <382344825> <New:388800512> ...
  177. 2026/03/30 15:52:04.118 [PXE]  [1] file_entry and extend data in the same block.
  178. 2026/03/30 15:52:04.118 [PXE]  [1] fix tag override 224[2656272 - 2656496] 2656312 2656256 56
  179. 2026/03/30 15:52:04.118 [PXE]  [1] ## virt BIOS BCD file 16384 20480 20480...
  180. 2026/03/30 15:52:04.118 [PXE]  [1] file_entry and extend data in the same block.
  181. 2026/03/30 15:52:04.118 [PXE]  [1] fix tag override 224[2560016 - 2560240] 2560056 2560000 56
  182. 2026/03/30 15:52:04.118 [PXE]  [1] ## virt BIOS BCD file 16384 20480 20480...
  183. 2026/03/30 15:52:04.118 [PXE]  [1] file_entry and extend data in the same block.
  184. 2026/03/30 15:52:04.118 [PXE]  [1] fix tag override 224[4251664 - 4251888] 4251704 4251648 56
  185. 2026/03/30 15:52:04.118 [PXE]  [1] find target file, name_len:24, offset: 678888, upadte hash
  186. 2026/03/30 15:52:04.118 [PXE]  [1] find target file, name_len:24, offset: 2724552, upadte hash
  187. 2026/03/30 15:52:04.118 [PXE]  [1] update replace lookup entry_id:2513
  188. 2026/03/30 15:52:04.118 [PXE]  [1] find meta lookup entry_id:1, update resource head and hash(4800688)
  189. 2026/03/30 15:52:04.118 [PXE]  [1] Virt data ISO file size: 4630972416 5019813888
  190. 2026/03/30 15:52:04.118 [PXE]  [1] ================ OVERRIDE DUMP ================
  191. 2026/03/30 15:52:04.118 [PXE]  [1]  <0> [ 9637912 - 9637916 4 ]
  192. 2026/03/30 15:52:04.118 [PXE]  [1]  <1> [ 1077248 - 2551808 1474560 ]
  193. 2026/03/30 15:52:04.118 [PXE]  [1]  <2> [ 530432 - 530944 512 ]
  194. 2026/03/30 15:52:04.118 [PXE]  [1]  <3> [ 2656256 - 2656768 512 ]
  195. 2026/03/30 15:52:04.118 [PXE]  [1]  <4> [ 2560000 - 2560512 512 ]
  196. 2026/03/30 15:52:04.118 [PXE]  [1]  <5> [ 4251648 - 4252160 512 ]
  197. 2026/03/30 15:52:04.119 [PXE]  [1] ================ OVERRIDE DUMP ================
  198. 2026/03/30 15:52:04.119 [PXE]  [1] ================ VIRT RANGE DUMP ================
  199. 2026/03/30 15:52:04.119 [PXE]  [1]  <iso/cn_windows_10_multi-edition_vl_version_1709_updated_sept_2017_x64_dvd_100090774.iso> WIM:1/1
  200. 2026/03/30 15:52:04.119 [PXE]  [1]  <01> [4630972416 - 5013317632 382345216 ] Remap
  201. 2026/03/30 15:52:04.119 [PXE]  [1]  <02> [4630972416 - 4630972624 208       ] Memory
  202. 2026/03/30 15:52:04.119 [PXE]  [1]  <03> [5013317632 - 5014478848 1161216   ] Memory
  203. 2026/03/30 15:52:04.119 [PXE]  [1]  <04> [5013511780 - 5013512804 1024      ] iVentoy Param
  204. 2026/03/30 15:52:04.119 [PXE]  [1]  <05> [5014478848 - 5019281408 4802560   ] Memory
  205. 2026/03/30 15:52:04.119 [PXE]  [1]  <06> [5015157736 - 5015157756 20        ] WIM BIN CHK
  206. 2026/03/30 15:52:04.119 [PXE]  [1]  <07> [5017203400 - 5017203420 20        ] WIM BIN CHK
  207. 2026/03/30 15:52:04.119 [PXE]  [1]  <08> [5019281408 - 5019772928 491520    ] Memory
  208. 2026/03/30 15:52:04.119 [PXE]  [1]  <09> [5019407088 - 5019407108 20        ] WIM BIN CHK
  209. 2026/03/30 15:52:04.119 [PXE]  [1]  <10> [5019281488 - 5019281508 20        ] WIM META CHK
  210. 2026/03/30 15:52:04.119 [PXE]  [1]  <11> [5019772928 - 5019793408 20480     ] Memory
  211. 2026/03/30 15:52:04.119 [PXE]  [1]  <12> [5019793408 - 5019813888 20480     ] Memory
  212. 2026/03/30 15:52:04.119 [PXE]  [1] ================ VIRT RANGE DUMP ================
  213. 2026/03/30 15:52:04.119 [PXE]  [1] Phase2 parse image <iso/cn_windows_10_multi-edition_vl_version_1709_updated_sept_2017_x64_dvd_100090774.iso> finished success
  214. 2026/03/30 15:52:04.122 [PXE]  [3] last chunk_size:78 decompresslen:32768 tot:7602176
  215. 2026/03/30 15:52:04.123 [PXE]  [3] find registry cmdline i:1880008 offset:(0x6e888)452744 size:(0x4c)76
  216. 2026/03/30 15:52:04.123 [PXE]  [3] start offset is 0x6f88c(456844)
  217. 2026/03/30 15:52:04.123 [PXE]  [3] registry setup cmdline:<PECMD.EXE MAIN %SystemRoot%\PECMD.INI>
  218. 2026/03/30 15:52:04.123 [PXE]  [3] @ directly use pecmd.exe 0000026BDD2C5040
  219. 2026/03/30 15:52:04.123 [PXE]  [3] find replace file at 0000026BDD2C5040
  220. 2026/03/30 15:52:04.123 [PXE]  [3] search hash <574647cf06719daa0d31ae27a35ff27ac18cd9c7>
  221. 2026/03/30 15:52:04.123 [PXE]  [3] find replace lookup entry_id:52 raw_size:1008128
  222. 2026/03/30 15:52:04.127 [PXE]  [3] 969356 1008128 chunk_num=31
  223. 2026/03/30 15:52:04.129 [PXE]  [3] last chunk_size:22350 decompresslen:25088 tot:1008128
  224. 2026/03/30 15:52:04.129 [PXE]  [3] jump exe </win/vtoypxe64.exe> len:194048 alignlen:194048
  225. 2026/03/30 15:52:04.130 [PXE]  [3] jump_exe_len:194048 bin_raw_len:2136540 bin_align_len:2138112
  226. 2026/03/30 15:52:04.130 [PXE]  [3] windows locate wim finish
  227. 2026/03/30 15:52:04.130 [PXE]  [3] Windows virt data new <WinPE> ...
  228. 2026/03/30 15:52:04.130 [PXE]  [3] UDF fill override data ...
  229. 2026/03/30 15:52:04.130 [PXE]  [3] PdSizeOffset=530624 tagOffset=530432
  230. 2026/03/30 15:52:04.130 [PXE]  [3] UDF tag valid OK, should match it.
  231. 2026/03/30 15:52:04.130 [PXE]  [3] UDF tag refresh OK.
  232. 2026/03/30 15:52:04.130 [PXE]  [3] ## virt wim file </WEPE/WEPE64.WIM> <219880538> <New:222498816> ...
  233. 2026/03/30 15:52:04.130 [PXE]  [3] file_entry and extend data in the same block.
  234. 2026/03/30 15:52:04.130 [PXE]  [3] fix tag override 224[3639312 - 3639536] 3639352 3639296 56
  235. 2026/03/30 15:52:04.130 [PXE]  [3] find target file, name_len:18, offset: 16104, upadte hash
  236. 2026/03/30 15:52:04.130 [PXE]  [3] find target file, name_len:18, offset: 103648, upadte hash
  237. 2026/03/30 15:52:04.130 [PXE]  [3] update replace lookup entry_id:52
  238. 2026/03/30 15:52:04.130 [PXE]  [3] find meta lookup entry_id:0, update resource head and hash(397008)
  239. 2026/03/30 15:52:04.130 [PXE]  [3] Virt data ISO file size: 478414848 700913664
  240. 2026/03/30 15:52:04.130 [PXE]  [3] ================ OVERRIDE DUMP ================
  241. 2026/03/30 15:52:04.130 [PXE]  [3]  <0> [ 530432 - 530944 512 ]
  242. 2026/03/30 15:52:04.130 [PXE]  [3]  <1> [ 3639296 - 3639808 512 ]
  243. 2026/03/30 15:52:04.130 [PXE]  [3] ================ OVERRIDE DUMP ================
  244. 2026/03/30 15:52:04.130 [PXE]  [3] ================ VIRT RANGE DUMP ================
  245. 2026/03/30 15:52:04.130 [PXE]  [3]  <iso/WePE_64_V2.3.iso> WIM:1/1
  246. 2026/03/30 15:52:04.130 [PXE]  [3]  <01> [478414848 - 698296320 219881472 ] Remap
  247. 2026/03/30 15:52:04.130 [PXE]  [3]  <02> [478414848 - 478415056 208       ] Memory
  248. 2026/03/30 15:52:04.130 [PXE]  [3]  <03> [698296320 - 700434432 2138112   ] Memory
  249. 2026/03/30 15:52:04.130 [PXE]  [3]  <04> [698490468 - 698491492 1024      ] iVentoy Param
  250. 2026/03/30 15:52:04.130 [PXE]  [3]  <05> [700434432 - 700831744 397312    ] Memory
  251. 2026/03/30 15:52:04.130 [PXE]  [3]  <06> [700450536 - 700450556 20        ] WIM BIN CHK
  252. 2026/03/30 15:52:04.130 [PXE]  [3]  <07> [700538080 - 700538100 20        ] WIM BIN CHK
  253. 2026/03/30 15:52:04.130 [PXE]  [3]  <08> [700831744 - 700913664 81920     ] Memory
  254. 2026/03/30 15:52:04.130 [PXE]  [3]  <09> [700834374 - 700834394 20        ] WIM BIN CHK
  255. 2026/03/30 15:52:04.130 [PXE]  [3]  <10> [700831774 - 700831794 20        ] WIM META CHK
  256. 2026/03/30 15:52:04.130 [PXE]  [3] ================ VIRT RANGE DUMP ================
  257. 2026/03/30 15:52:04.130 [PXE]  [3] Phase2 parse image <iso/WePE_64_V2.3.iso> finished success
  258. 2026/03/30 15:52:04.130 [PXE]  Update ipxe menu 1 ...
  259. 2026/03/30 15:52:04.130 [PXE]  ================= IMG TREE DUMP =================
  260. 2026/03/30 15:52:04.130 [PXE]  FirPE-V2.1.1.iso [2] <WIMS:0/0>
  261. 2026/03/30 15:52:04.130 [PXE]  WePE_64_V2.3.iso [3] <WIMS:1/1>
  262. 2026/03/30 15:52:04.130 [PXE]  cn_windows_10_multi-edition_vl_version_1709_updated_sept_2017_x64_dvd_100090774.iso [1] <WIMS:1/1>
  263. 2026/03/30 15:52:04.130 [PXE]  ================================================
  264. 2026/03/30 15:52:04.131 [HTTP] HTTP PXE service starting ...
  265. 2026/03/30 15:52:04.131 [TFTP] TFTP service starting ...
  266. 2026/03/30 15:52:04.131 [DHCP] DHCP service starting ...
  267. 2026/03/30 15:52:04.131 [NBD]  NBD service starting ...
  268. 2026/03/30 15:52:04.131 [PXE]  Now save iventoy config data ...
  269. 2026/03/30 15:52:04.131 [PXE]  iventoy config data (data/config.dat) save OK
  270. 2026/03/30 15:52:04.131 [PXE]  ===========================================================
  271. 2026/03/30 15:52:04.131 [PXE]         iVentoy 1.0.20 [Windows 64] is running now ...
  272. 2026/03/30 15:52:04.131 [PXE]  ===========================================================
  273. 2026/03/30 15:52:04.132 [HTTP] HTTP PXE service is running on 186.168.2.174:16000 ...
  274. 2026/03/30 15:52:04.132 [TFTP] TFTP write thread is running 1948 ...
  275. 2026/03/30 15:52:04.132 [TFTP] TFTP service is running ...
  276. 2026/03/30 15:52:04.132 [DHCP] DHCP service is running ...
  277. 2026/03/30 15:52:04.133 [HTTP] NBD service is running on 186.168.2.174:10809 ...
  278. 2026/03/30 15:52:04.607 [HTTP] API request: <{"method":"query_status"}>
  279. 2026/03/30 15:52:04.616 [HTTP] API request: <{"method":"sys_ip_list"}>
  280. 2026/03/30 15:52:04.621 [HTTP] API request: <{"method":"get_dhcp_mode"}>
  281. 2026/03/30 15:53:03.885 [DHCP] Snooping 40-8d-5c-b8-08-c6 MSG:<DISCOVER> ARCH:<Intel x86PC> 0000000000000000
  282. 2026/03/30 15:53:03.886 [DHCP] snopping add client 40-8d-5c-b8-08-c6
  283. 2026/03/30 15:53:07.922 [DHCP] Snooping 40-8d-5c-b8-08-c6 MSG:<DISCOVER> ARCH:<Intel x86PC> 0000026BDD168B30
  284. 2026/03/30 15:53:15.986 [DHCP] Snooping 40-8d-5c-b8-08-c6 MSG:<DISCOVER> ARCH:<Intel x86PC> 0000026BDD168B30
  285. 2026/03/30 15:53:48.072 [DHCP] Snooping 40-8d-5c-b8-08-c6 MSG:<DISCOVER> ARCH:<Intel x86PC> 0000026BDD168B30
  286. 2026/03/30 15:53:56.146 [DHCP] Snooping 40-8d-5c-b8-08-c6 MSG:<DISCOVER> ARCH:<Intel x86PC> 0000026BDD168B30
  287. 2026/03/30 15:54:00.212 [DHCP] Snooping 40-8d-5c-b8-08-c6 MSG:<DISCOVER> ARCH:<Intel x86PC> 0000026BDD168B30
  288. 2026/03/30 15:54:40.155 [PXE]  IDC_BUTTON4 ...
  289. 2026/03/30 15:54:40.155 [PXE]  OnDestroyDialog ...
  290. 2026/03/30 15:54:40.155 [PXE]  Main loop break, now exit iventoy ...
  291. 2026/03/30 15:54:40.155 [PXE]  iVentoy service is stopping ...
  292. 2026/03/30 15:54:40.155 [PXE]  Now save iventoy config data ...
  293. 2026/03/30 15:54:40.155 [PXE]  iventoy config data (data/config.dat) save OK
  294. 2026/03/30 15:54:40.155 [PXE]  [1] image phase2 free for <iso/cn_windows_10_multi-edition_vl_version_1709_updated_sept_2017_x64_dvd_100090774.iso>
  295. 2026/03/30 15:54:40.155 [PXE]  [1] wim location free
  296. 2026/03/30 15:54:40.156 [PXE]  [1] Windows virt data free <Windows> ...
  297. 2026/03/30 15:54:40.156 [PXE]  [2] image phase2 free for <iso/FirPE-V2.1.1.iso>
  298. 2026/03/30 15:54:40.156 [PXE]  [2] wim location free
  299. 2026/03/30 15:54:40.156 [PXE]  [2] Windows virt data free <WinPE> ...
  300. 2026/03/30 15:54:40.156 [PXE]  [3] image phase2 free for <iso/WePE_64_V2.3.iso>
  301. 2026/03/30 15:54:40.156 [PXE]  [3] wim location free
  302. 2026/03/30 15:54:40.157 [PXE]  [3] Windows virt data free <WinPE> ...
  303. 2026/03/30 15:54:40.157 [DHCP] DHCP service stop starting...
  304. 2026/03/30 15:54:40.157 [DHCP] DHCP service stop finished OK
  305. 2026/03/30 15:54:40.157 [TFTP] TFTP service stop starting...
  306. 2026/03/30 15:54:40.157 [TFTP] Wating for tftp write thread finish ...
  307. 2026/03/30 15:54:40.157 [TFTP] tftp write thread finished OK
  308. 2026/03/30 15:54:40.157 [TFTP] Wating for tftp read thread finish ...
  309. 2026/03/30 15:54:40.157 [TFTP] tftp read thread finished OK
  310. 2026/03/30 15:54:40.157 [TFTP] TFTP service stop finished OK
  311. 2026/03/30 15:54:40.157 [HTTP] HTTP PXE service stop starting...
  312. 2026/03/30 15:54:40.157 [HTTP] HTTP PXE master stop starting...
  313. 2026/03/30 15:54:40.158 [HTTP] HTTP PXE master stop finished OK
  314. 2026/03/30 15:54:40.158 [HTTP] HTTP PXE service stop finished OK
  315. 2026/03/30 15:54:40.158 [NBD]  NBD service stop starting...
  316. 2026/03/30 15:54:40.158 [NBD]  NBD master stop starting...
  317. 2026/03/30 15:54:40.158 [NBD]  NBD master stop finished OK
  318. 2026/03/30 15:54:40.158 [NBD]  NBD service stop finished OK
  319. 2026/03/30 15:54:40.158 [PXE]  iVentoy service stop OK.
  320. 2026/03/30 15:54:40.190 [PXE]  Module <NBD> exit ...
  321. 2026/03/30 15:54:40.190 [NBD]  NBD worker 0 stop starting...
  322. 2026/03/30 15:54:40.190 [NBD]  NBD worker 0 stop finished OK
  323. 2026/03/30 15:54:40.191 [NBD]  NBD worker 1 stop starting...
  324. 2026/03/30 15:54:40.191 [NBD]  NBD worker 1 stop finished OK
  325. 2026/03/30 15:54:40.191 [NBD]  NBD worker 2 stop starting...
  326. 2026/03/30 15:54:40.191 [NBD]  NBD worker 2 stop finished OK
  327. 2026/03/30 15:54:40.191 [NBD]  NBD worker 3 stop starting...
  328. 2026/03/30 15:54:40.191 [NBD]  NBD worker 3 stop finished OK
  329. 2026/03/30 15:54:40.191 [PXE]  Module <HTTP> exit ...
  330. 2026/03/30 15:54:40.191 [HTTP] HTTP API master stop starting...
  331. 2026/03/30 15:54:40.192 [HTTP] HTTP API master stop finished OK
  332. 2026/03/30 15:54:40.192 [HTTP] HTTP worker 0 stop starting...
  333. 2026/03/30 15:54:40.192 [HTTP] HTTP worker 0 stop finished OK
  334. 2026/03/30 15:54:40.192 [HTTP] HTTP worker 1 stop starting...
  335. 2026/03/30 15:54:40.192 [HTTP] HTTP worker 1 stop finished OK
  336. 2026/03/30 15:54:40.193 [HTTP] HTTP worker 2 stop starting...
  337. 2026/03/30 15:54:40.193 [HTTP] HTTP worker 2 stop finished OK
  338. 2026/03/30 15:54:40.193 [HTTP] HTTP worker 3 stop starting...
  339. 2026/03/30 15:54:40.193 [HTTP] HTTP worker 3 stop finished OK
  340. 2026/03/30 15:54:40.193 [HTTP] HTTP API master stop finished OK
  341. 2026/03/30 15:54:40.193 [PXE]  Module <TFTP> exit ...
  342. 2026/03/30 15:54:40.193 [TFTP] tftp exit starting...
  343. 2026/03/30 15:54:40.193 [TFTP] tftp exit finished OK
  344. 2026/03/30 15:54:40.193 [PXE]  Module <DHCP> exit ...
  345. 2026/03/30 15:54:40.193 [DHCP] dhcp exit finished OK
  346. 2026/03/30 15:54:40.193 [PXE]  Module <IMG> exit ...
  347. 2026/03/30 15:54:40.193 [PXE]  free all images ...
  348. 2026/03/30 15:54:40.194 [PXE]  Module <OS> exit ...
  349. 2026/03/30 15:54:40.194 [PXE]  Module <Tarfs> exit ...
  350. 2026/03/30 15:54:40.195 [PXE]  Module <MAC> exit ...
  351. 2026/03/30 15:54:40.196 [PXE]  Module <Cfg> exit ...
  352. 2026/03/30 15:54:40.196 [PXE]  Module <Plat> exit ...
  353. 2026/03/30 15:54:40.196 [PXE]  Module <Log> exit ...
  354. 2026/03/30 15:54:40.196 [LOG]  iVentoy log exit ...

复制代码



回复

使用道具 举报

 楼主| 发表于 1 小时前 | 显示全部楼层
ytfqifw 发表于 2026-3-30 15:57
是否有多段网??用路由器或DHCP隔开的,如果全网只有一个路由器就是选第2个,我这里成功了,哈哈,
...

没有,你是直接改了第二个就可以了, 路由器上还要不要配置?
回复

使用道具 举报

发表于 22 分钟前 | 显示全部楼层
这还真不懂,哪位大佬来讲讲
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 注册

本版积分规则

小黑屋|手机版|Archiver|捐助支持|无忧启动 ( 闽ICP备05002490号-1|闽公网安备35020302032614号 )

GMT+8, 2026-3-30 17:23

Powered by Discuz! X5.0

© 2001-2026 Discuz! Team.

快速回复 返回顶部 返回列表