imdisk在vista下使用问题

go2

一直觉得imdisk很好用，但vista下加载映像及卸载映像都有问题。查了一下官方网站http://www.ltr-data.se/opencode.html#ImDisk
说"ImDisk is a virtual disk driver for WindowsNT/2000/XP/2003/Vista/2008."
方法如下:

Set the ImDisk driver to auto-load at Command Prompt: sc configimdisk start= auto
orset the ImDisk driver to auto-load using GUI: Open Device Manager, View-> Show hidden devices. Under "Non-plug-and-play devices"right-click ImDisk Virtual Disk Driver and select properties.On the "Driver" tab, change start type to Automatic.

现在加载映像是没问题了，但我用卸载映像时却还是显示错误。不知有没解决方法?

fujianabc

貌似要关了UAC才行

go2

就是不想关了UAC啊

看来只能期待作者更新了。

fujianabc

官网上一段：
Special note for both 32-bit and 64-bit versions of Windows Vista, Windows Server 2008 and Windows 7
On Vista and Server 2008 you need to either turn off UAC, User Access Control, or setup the driver to auto-load on system startup..

Set the ImDisk driver to auto-load at Command Prompt: sc config imdisk start= auto
or set the ImDisk driver to auto-load using GUI: Open Device Manager, View -> Show hidden devices. Under "Non-plug-and-play devices" right-click ImDisk Virtual Disk Driver and select properties. On the "Driver" tab, change start type to Automatic.

Using either solution it should work after next reboot.


要么关uac，要么把驱动加载类型设为启动时加载

go2

已设为系统启动是自动启动imdisk，现在是加载映像没问题，而卸载出问题

go2

回版主：系统为vista，可能兼容imdisk不好