光盘启动里的批处理命令应该怎样写？

yu100

想在光盘启动里加入一批处理命令，这个命令执行启动光盘里的程序，启动光盘盘符随意字母，这个命令怎样写?

mutou4396

修改启动映像的autoexec.bat和config.sys
参考如下：
autoexec.bat:
@ECHO OFF
set EXPAND=YES
SET DIRCMD=/O:N
set LglDrv=27 * 26 Z 25 Y 24 X 23 W 22 V 21 U 20 T 19 S 18 R 17 Q 16 P 15
set LglDrv=%LglDrv% O 14 N 13 M 12 L 11 K 10 J 9 I 8 H 7 G 6 F 5 E 4 D 3 C
cls
call setramd.bat %LglDrv%
set temp=c:\
set tmp=c:\
path=%RAMD%:\;a:\;%path%;%CDROM%:\
copy command.com %RAMD%:\ > NUL
set comspec=%RAMD%:\command.com
copy extract.exe %RAMD%:\ > NUL
copy readme.txt %RAMD%:\ > NUL
:ERROR
IF EXIST ebd.cab GOTO EXT
echo Please insert Windows Millennium Edition Startup Disk 2
echo.
pause
GOTO ERROR
:EXT
%RAMD%:\extract /y /e /l %RAMD%: ebd.cab > NUL
echo The diagnostic tools were successfully loaded to drive %RAMD%.
echo.
LH %ramd%:\MSCDEX.EXE /D:mscd001 /L:%CDROM%
echo.
%CDROM%: > NUL
rem
CD \tools\ghost > NUL
rem
MOUSE.com > NUL
ghost.exe > NUL
ECHO Star ghost second edition FAILURE!!!
:QUIT
echo To get help, type HELP and press ENTER.
echo.
rem clean up environment variables
set CDROM=
set LglDrv=
:QUICK
对应的config.sys:
device=himem.sys /testmem:off
device=oakcdrom.sys /D:mscd001
device=btdosm.sys
device=flashpt.sys
device=btcdrom.sys /D:mscd001
device=aspi2dos.sys
device=aspi8dos.sys
device=aspi4dos.sys
device=aspi8u2.sys
device=aspicd.sys /D:mscd001
files=10
buffers=10
dos=high,umb
stacks=9,256
devicehigh=ramdrive.sys /E 2048
lastdrive=z

q8q8feng

原帖由 yu100 于 2004-1-7 11:49 AM 发表
想在光盘启动里加入一批处理命令，这个命令执行启动光盘里的程序，启动光盘盘符随意字母，这个命令怎样写?

像二楼说的那样，在AUTOEXEC.BAT中加上这个批处理名字就可以了，当然你的批处理也得加入到AUTOEXEC.BAT所在的IMG文件中。