巴尔扎特 发表于 2017-3-14 16:05
试一试,看看好用不。谢谢制作者们辛苦付出。
UD三分区,加上无损数据区制作,当然是刚刚的。
牛皮不是吹的嘛。
这个作品第一次有团队制作,
水平是相当高的。 吹牛不上税! zds1210 发表于 2017-3-13 22:37
有没有朋友翻译下,他要什么?
hello
thank you for considering .
also , can you please share again on any other host then baidu ? , i can not use Baidu , block in pakistan.
thank you , waiting.
独剑标准UD三分区PE无损制作20170305U版模块.7z
is it with tool ?
Best Regards
Maanu from Pakistan maanu 发表于 2017-3-15 02:20
hello
thank you for considering .
传到什么地方?电子邮件 zds1210 发表于 2017-3-15 13:10
传到什么地方?电子邮件
hello ,
i have sent you email address in message.
problem is , this link http://yunpan.cn/cdN3ieGMRNaMwis down . if you can re upload here, i can download. 感谢zds1210的推广与执著,三分区很方便。
我现在是:先量产,再三分区,这样,就有三个选项,而且每一个里面皆有不同的PE,几乎做到一盘走天下。 好东西,支持一下 不错~不错~ jmjmbj 发表于 2017-3-16 07:41
感谢zds1210的推广与执著,三分区很方便。
我现在是:先量产,再三分区,这样,就有三个选项,而且每一个 ...
我不支持你的做法,我认为不如一个u 盘。一种部署法。 zds1210 发表于 2017-3-16 16:22
我不支持你的做法,我认为不如一个u 盘。一种部署法。
支持这种方法,量产一个,三分区一个,够用了。 zds1210 发表于 2017-3-15 13:10
传到什么地方?电子邮件
hello , i was able to download the tool from baidu using vpn , it was awesome experience.
i was looking for this option of having NTFS with UD , since the beginning of FBINST by Bean at znpc forums .,
i used center option
,
i used by own UEFI iso with x64 win10 english PE , and my own FBA package . and it is awesome experience.i ll post another topic asking for different steps meaning in english .
Thank you for such a beautiful tool , i am so much happy . i hope soon , you ll release english version.
Best Regards
Maanu from Pakistan
外国人的话,有没有人翻译下。 路过 路过 请问放在UD区或者EFI区中的PE,是否不能两种启动方式共用? 一会试一下。 不知道有没有加入最新的NVME驱动呀!
然则应付新本(小新、710S之类自带NVME的本)有点难度呀 神棍 发表于 2017-3-18 18:27
不知道有没有加入最新的NVME驱动呀!
然则应付新本(小新、710S之类自带NVME的本)有点难度呀
8 pe支持吧。 神棍 发表于 2017-3-18 18:27
不知道有没有加入最新的NVME驱动呀!
然则应付新本(小新、710S之类自带NVME的本)有点难度呀
8 .1及10 pe原生态支持,8pec大他们努力解决中。 thank you hello , i think your tool not compatible with fbinst 1.7 that yaya updated recently , when i open my usb with fbinst 1.607 , it can read the UD district , but when i open it with fbinst 1.7 , it shows this message .
i use U盘启动制作工具(2.0.2.1)增强版f2 to prepare my USB . 32GB kingston 3.0
it shows this error when i open fbinstool 1.7
本帖最后由 zds1210 于 2017-3-19 17:22 编辑
maanu 发表于 2017-3-19 16:55
hello , i think your tool not compatible with fbinst 1.7 that yaya updated recently , when i open my ...
好了。1.7fb并不向下兼容fb1.6制作的UD区。
所以,如果要兼容1.7的fbinstool,则一键制作和PE的fbinst plus都更新到百大的支持1.7版。
工作量相当大。作为三分区来,并没有必要更新fb至1.7版,因为UD区并不需要大于4G。以后的UD只放一个grldr。
1.7fb主要是为了把玩新的分区表项,所以,不得不更新至64位支持大于4G的UD。
当然,为了不造成大家因新老版本的fb之间的兼容性困扰,等有时间,我做好制作工具的更新工作,做好fba的更新工作,
其实就是更新一个fbinst plus文件就是了。 zds1210 发表于 2017-3-19 17:14
好了。1.7fb并不向下兼容fb1.6制作的UD区。
所以,如果要兼容1.7的fbinstool,则一键制作和PE的fbinst p ...
ok , i think i will wait for your update tool .
in the meantime , where should i put the fbplus file ? in BIN folder , replace old file , fbinst.exe ? maanu 发表于 2017-3-19 20:52
ok , i think i will wait for your update tool .
in the meantime , where should i put the fbplu ...
好了,fb1.7还在完善中,升级成功太高,暂时用1.6版的fb和fbtoo田就可以 。
U启区中,我置顶帖子中有专门老版本的fbtool下载。
巴基斯坦古暮的文译为中文
本帖最后由 大悍虎 于 2017-3-19 21:45 编辑zds1210 发表于 2017-3-16 17:11
外国人的话,有没有人翻译下。
送出机译网页截图——
这不是赶时髦雨 算填枯迟来水吧
本帖最后由 大悍虎 于 2017-3-19 22:01 编辑zds1210 发表于 2017-3-16 17:11
外国人的话,有没有人翻译下。
刚看到巴基斯坛——古暮——无优论坛载花是中将——的英文对话——试用机译为中文截图——送出作参考—— 20170320版:主程序更新至2.0.2.2U版,三分区升级模式制作时的小错误;同时向下兼容,制作一个ansi版本的cmd和程序模块,以适用于ansi格式的老UD。因默默工作特别忙,程序版经默默授权修正发布。无损制作和全新制作UD三分区项目完美收工! 好东西啊,收下来,谢谢大师! 通告:基于分区助手命令行一键制作UD三分区项目,完美收工!乐见UD三分区一键制作盘如雨后春笋般涌现。
au3源码在适当的时机会考虑开源。目前不是时候。 谢谢Z大等的奉献和精心制作