回复 #755 一望无垠 的帖子
在config/software注册表classes/doc
classes/OfficeWord
然后在regdoc.cmd中这么引用的
REG ADD HKCR\OfficeWord\shell\open\command /ve /t REG_SZ /d "\"%TP%\文本图像\OFFICE\WORD.EXE\" "\"%%1\" /f>NUL
要是用regtool打开software文件，直接按时间倒序排列，就能看得很清楚了。
还能直接导出为reg文件，再导入到要修改的XPE中即可。 发现我不能上传附件，就把 setupapi.dev.log 贴上来。对realtek 8187l无线网卡，不能显示出来而言。
OS Version = 6.1.7601
Service Pack = 0.0
Suite = 0x0100
ProductType = 1
Architecture = x86
>>>_M_CPU________440__@_1.86GHz\_1]
>>>Section start 2012/07/17 20:23:24.750
ump: Creating Install Process: DrvInst.exe 20:23:24.750
ndv: Retrieving device info...
ndv: Setting device parameters...
ndv: Searching Driver Store and Device Path...
dvi: {Build Driver List} 20:23:24.796
dvi: Searching for hardware ID(s):
dvi: acpi\genuineintel_-_x86_family_6_model_14
dvi: *genuineintel_-_x86_family_6_model_14
dvi: acpi\genuineintel_-_x86_family_6
dvi: *genuineintel_-_x86_family_6
dvi: acpi\genuineintel_-_x86
dvi: *genuineintel_-_x86
dvi: Searching for compatible ID(s):
dvi: acpi\processor
cpy: Policy is set to make all digital signatures equal.
dvi: Enumerating INFs from path list 'X:\WINDOWS\inf'
! inf: Detected INFCACHE inconsistency
! inf: Attempting INFCACHE repair 20:23:24.796
! inf: Verify/Fix on INFCACHE complete, status(4) - Fixed 20:23:25.046
inf: Searched 0 potential matches in published INF directory
inf: Searched 2 INFs in directory: 'X:\WINDOWS\inf'
dvi: {Build Driver List - exit(0x00000000)} 20:23:25.062
ndv: Selecting best match from Driver Store (including Device Path)...
dvi: {DIF_SELECTBESTCOMPATDRV} 20:23:25.062
dvi: Using exported function 'ProcessorClassInstall' in module 'X:\WINDOWS\system32\procinst.dll'.
dvi: Class installer == procinst.dll,ProcessorClassInstall
dvi: No CoInstallers found
dvi: Class installer: Enter 20:23:25.125
dvi: Class installer: Exit
dvi: Default installer: Enter 20:23:25.125
dvi: {Select Best Driver}
! dvi: Selecting driver failed(0xe0000228)
dvi: {Select Best Driver - exit(0xe0000228)}
! dvi: Default installer: failed!
dvi: {DIF_SELECTBESTCOMPATDRV - exit(0xe0000228)} 20:23:25.125
ndv: {Core Device Install} 20:23:25.125
! ndv: Installing NULL driver!
dvi: Set selected driver complete.
dvi: {DIF_ALLOW_INSTALL} 20:23:25.125
dvi: Class installer: Enter 20:23:25.125
dvi: Class installer: Exit
dvi: Default installer: Enter 20:23:25.125
dvi: Default installer: Exit
dvi: {DIF_ALLOW_INSTALL - exit(0xe000020e)} 20:23:25.125
dvi: {DIF_INSTALLDEVICE} 20:23:25.125
dvi: Class installer: Enter 20:23:25.125
! dvi: Installing NULL driver!
dvi: Writing common driver property settings.
! dvi: Failed to set Device Description property: (null)
dvi: {Restarting Devices} 20:23:25.140
dvi: Restart: ACPI\GENUINEINTEL_-_X86_FAMILY_6_MODEL_14_-_INTEL(R)_CELERON(R)_M_CPU________440__@_1.86GHZ\_1
dvi: Restart complete.
dvi: {Restarting Devices exit} 20:23:25.140
dvi: Class installer: Exit
dvi: {DIF_INSTALLDEVICE - exit(0x00000000)} 20:23:25.140
ndv: Device install status=0xe0000203
ndv: Performing device install final cleanup...
! ndv: Queueing up error report since device installation failed...
ndv: {Core Device Install - exit(0xe0000203)} 20:23:25.140
dvi: {DIF_DESTROYPRIVATEDATA} 20:23:25.140
dvi: Class installer: Enter 20:23:25.140
dvi: Class installer: Exit
dvi: Default installer: Enter 20:23:25.140
dvi: Default installer: Exit
dvi: {DIF_DESTROYPRIVATEDATA - exit(0xe000020e)} 20:23:25.140
ump: Server install process exited with code 0xe0000203 20:23:25.265
<<<Section end 2012/07/17 20:23:25.265
<<<
>>>
>>>Section start 2012/07/17 20:23:24.765
ump: Creating Install Process: DrvInst.exe 20:23:24.765
ndv: Retrieving device info...
ndv: Setting device parameters...
ndv: Searching Driver Store and Device Path...
dvi: {Build Driver List} 20:23:24.906
dvi: Searching for hardware ID(s):
dvi: pci\ven_8086&dev_27d8&subsys_0f701019&rev_02
dvi: pci\ven_8086&dev_27d8&subsys_0f701019
dvi: pci\ven_8086&dev_27d8&cc_040300
dvi: pci\ven_8086&dev_27d8&cc_0403
dvi: Searching for compatible ID(s):
dvi: pci\ven_8086&dev_27d8&rev_02
dvi: pci\ven_8086&dev_27d8
dvi: pci\ven_8086&cc_040300
dvi: pci\ven_8086&cc_0403
dvi: pci\ven_8086
dvi: pci\cc_040300
dvi: pci\cc_0403
cpy: Policy is set to make all digital signatures equal.
dvi: Enumerating INFs from path list 'X:\WINDOWS\inf'
! inf: Detected INFCACHE inconsistency
! inf: Attempting INFCACHE repair 20:23:25.468
! inf: Verify/Fix on INFCACHE complete, status(4) - Fixed 20:23:25.640
inf: Searched 0 potential matches in published INF directory
inf: Searched 2 INFs in directory: 'X:\WINDOWS\inf'
dvi: {Build Driver List - exit(0x00000000)} 20:23:26.562
ndv: Selecting best match from Driver Store (including Device Path)...
dvi: {DIF_SELECTBESTCOMPATDRV} 20:23:26.562
dvi: No class installer for 'PCI Device'
dvi: Using exported function 'CriticalDeviceCoInstaller' in module 'X:\WINDOWS\system32\SysClass.Dll'.
dvi: CoInstaller 1 == SysClass.Dll,CriticalDeviceCoInstaller
dvi: CoInstaller 1: Enter 20:23:26.625
dvi: CoInstaller 1: Exit
dvi: Default installer: Enter 20:23:26.625
dvi: {Select Best Driver}
! dvi: Selecting driver failed(0xe0000228)
dvi: {Select Best Driver - exit(0xe0000228)}
! dvi: Default installer: failed!
dvi: {DIF_SELECTBESTCOMPATDRV - exit(0xe0000228)} 20:23:26.625
ndv: {Core Device Install} 20:23:26.625
! ndv: Installing NULL driver!
dvi: Set selected driver complete.
dvi: {DIF_ALLOW_INSTALL} 20:23:26.671
dvi: No class installer for 'PCI Device'
dvi: CoInstaller 1: Enter 20:23:26.671
dvi: CoInstaller 1: Exit
dvi: Default installer: Enter 20:23:26.671
dvi: Default installer: Exit
dvi: {DIF_ALLOW_INSTALL - exit(0xe000020e)} 20:23:26.671
dvi: {DIF_INSTALLDEVICE} 20:23:26.671
dvi: No class installer for 'PCI Device'
dvi: CoInstaller 1: Enter 20:23:26.671
dvi: CoInstaller 1: Exit
dvi: Default installer: Enter 20:23:26.671
! dvi: Installing NULL driver!
dvi: Writing common driver property settings.
dvi: {Restarting Devices} 20:23:26.671
dvi: Restart: PCI\VEN_8086&DEV_27D8&SUBSYS_0F701019&REV_02\3&11583659&0&D8
dvi: Restart complete.
dvi: {Restarting Devices exit} 20:23:26.687
dvi: Default installer: Exit
dvi: CoInstaller 1: Enter (Post Processing) 20:23:26.687
dvi: CoInstaller 1: Exit (Post Processing)
dvi: {DIF_INSTALLDEVICE - exit(0x00000000)} 20:23:26.687
ndv: Device install status=0xe0000203
ndv: Performing device install final cleanup...
! ndv: Queueing up error report since device installation failed...
ndv: {Core Device Install - exit(0xe0000203)} 20:23:26.687
dvi: {DIF_DESTROYPRIVATEDATA} 20:23:26.687
dvi: CoInstaller 1: Enter 20:23:26.687
dvi: CoInstaller 1: Exit
dvi: Default installer: Enter 20:23:26.687
dvi: Default installer: Exit
dvi: {DIF_DESTROYPRIVATEDATA - exit(0xe000020e)} 20:23:26.687
ump: Server install process exited with code 0xe0000203 20:23:26.812
<<<Section end 2012/07/17 20:23:26.812
<<<
>>>
>>>Section start 2012/07/17 20:23:24.781
ump: Creating Install Process: DrvInst.exe 20:23:24.781
ndv: Retrieving device info...
ndv: Setting device parameters...
ndv: Searching Driver Store and Device Path...
dvi: {Build Driver List} 20:23:24.906
dvi: Searching for hardware ID(s):
dvi: pci\ven_1217&dev_00f7&subsys_0f701019&rev_02
dvi: pci\ven_1217&dev_00f7&subsys_0f701019
dvi: pci\ven_1217&dev_00f7&cc_0c0010
dvi: pci\ven_1217&dev_00f7&cc_0c00
dvi: Searching for compatible ID(s):
dvi: pci\ven_1217&dev_00f7&rev_02
dvi: pci\ven_1217&dev_00f7
dvi: pci\ven_1217&cc_0c0010
dvi: pci\ven_1217&cc_0c00
dvi: pci\ven_1217
dvi: pci\cc_0c0010
dvi: pci\cc_0c00
cpy: Policy is set to make all digital signatures equal.
dvi: Enumerating INFs from path list 'X:\WINDOWS\inf'
! inf: Detected INFCACHE inconsistency
! inf: Attempting INFCACHE repair 20:23:25.468
! inf: Verify/Fix on INFCACHE complete, status(4) - Fixed 20:23:26.578
inf: Searched 0 potential matches in published INF directory
inf: Searched 2 INFs in directory: 'X:\WINDOWS\inf'
dvi: {Build Driver List - exit(0x00000000)} 20:23:26.593
ndv: Selecting best match from Driver Store (including Device Path)...
dvi: {DIF_SELECTBESTCOMPATDRV} 20:23:26.593
dvi: No class installer for 'IEEE 1394 Controller'
dvi: No CoInstallers found
dvi: Default installer: Enter 20:23:26.625
dvi: {Select Best Driver}
! dvi: Selecting driver failed(0xe0000228)
dvi: {Select Best Driver - exit(0xe0000228)}
! dvi: Default installer: failed!
dvi: {DIF_SELECTBESTCOMPATDRV - exit(0xe0000228)} 20:23:26.625
ndv: Waiting for previous device install to complete. 20:23:26.625
ndv: {Core Device Install} 20:23:26.687
! ndv: Installing NULL driver!
dvi: Set selected driver complete.
dvi: {DIF_ALLOW_INSTALL} 20:23:26.687
dvi: No class installer for 'IEEE 1394 Controller'
dvi: Default installer: Enter 20:23:26.687
dvi: Default installer: Exit
dvi: {DIF_ALLOW_INSTALL - exit(0xe000020e)} 20:23:26.687
dvi: {DIF_INSTALLDEVICE} 20:23:26.687
dvi: No class installer for 'IEEE 1394 Controller'
dvi: Default installer: Enter 20:23:26.687
! dvi: Installing NULL driver!
dvi: Writing common driver property settings.
dvi: {Restarting Devices} 20:23:26.828
dvi: Restart: PCI\VEN_1217&DEV_00F7&SUBSYS_0F701019&REV_02\4&1F66DF41&0&38F0
dvi: Restart complete.
dvi: {Restarting Devices exit} 20:23:26.828
dvi: Default installer: Exit
dvi: {DIF_INSTALLDEVICE - exit(0x00000000)} 20:23:26.828
ndv: Device install status=0xe0000203
ndv: Performing device install final cleanup...
! ndv: Queueing up error report since device installation failed...
ndv: {Core Device Install - exit(0xe0000203)} 20:23:26.828
ump: Server install process exited with code 0xe0000203 20:23:26.843
<<<Section end 2012/07/17 20:23:26.843
<<<
>>>
>>>Section start 2012/07/17 20:26:25.843
cmd: pecmddevi Netrtuw.inf
inf: {SetupCopyOEMInf: E:\Win7X86\Netrtuw.inf} 20:26:25.843
inf: Opened INF: 'E:\Win7X86\Netrtuw.inf' ()
! inf: Add to Driver Store unsuccessful
!!!inf: returning failure to SetupCopyOEMInf
inf: {SetupCopyOEMInf exit (0x0000007f)} 20:26:25.890
<<<Section end 2012/07/17 20:26:25.890
<<<
回复 #758 zyk02 的帖子
贴上最后一个小节就行，就是如下部分，有你执行pecmd devi netrtuw.inf命令。>>>
>>>Section start 2012/07/17 20:26:25.843
cmd: pecmddevi Netrtuw.inf
inf: {SetupCopyOEMInf: E:\Win7X86\Netrtuw.inf} 20:26:25.843
inf: Opened INF: 'E:\Win7X86\Netrtuw.inf' ()
! inf: Add to Driver Store unsuccessful
!!!inf: returning failure to SetupCopyOEMInf
inf: {SetupCopyOEMInf exit (0x0000007f)} 20:26:25.890
<<<Section end 2012/07/17 20:26:25.890
<<<
请确认以下两件事：
①执行pecmd devi命令是在启用网络组件之后吧。
②无线网卡是内置的，还是外插的USB无线网卡。
再把这个Netrtuw.inf的内容也贴下。 不好意思，上次急了一点，重新来过。无线网卡是外插的USB无线网卡。把自己的驱动包删除了rtl8187b，不知有没有关系？
楼主请看：
以下是 setupapi.dev.log 的部分内容：
>>>
>>>Section start 2012/07/17 23:30:22.421
cmd: pecmddevi Netrtuw.inf
inf: {SetupCopyOEMInf: E:\Win7X86\Netrtuw.inf} 23:30:22.421
sto: {Import Driver Package: E:\Win7X86\Netrtuw.inf} 23:30:22.468
sto: Importing driver package into Driver Store:
sto: Driver Store = X:\WINDOWS\System32\DriverStore (Online | 6.1.7601)
sto: Driver Package = E:\Win7X86\Netrtuw.inf
sto: Architecture = x86
sto: Locale Name = neutral
sto: Flags = 0x00001000
sto: Copying driver package files to 'X:\Users\Default\AppData\Local\Temp\{2acae291-e221-5164-9a29-9e575d24180b}'.
inf: Opened INF: 'E:\Win7X86\Netrtuw.inf' ()
inf: Opened INF: 'E:\Win7X86\Netrtuw.inf' ()
flq: {FILE_QUEUE_COPY}
flq: CopyStyle - 0x00000000
flq: SourceRootPath - 'E:\Win7X86'
flq: SourceFilename - 'netrtuw.cat'
flq: TargetDirectory- 'X:\Users\Default\AppData\Local\Temp\{2acae291-e221-5164-9a29-9e575d24180b}'
flq: {FILE_QUEUE_COPY exit(0x00000000)}
flq: {FILE_QUEUE_COPY}
flq: CopyStyle - 0x00000000
flq: SourceRootPath - 'E:\Win7X86'
flq: SourceFilename - 'Netrtuw.inf'
flq: TargetDirectory- 'X:\Users\Default\AppData\Local\Temp\{2acae291-e221-5164-9a29-9e575d24180b}'
flq: {FILE_QUEUE_COPY exit(0x00000000)}
flq: {FILE_QUEUE_COPY}
flq: CopyStyle - 0x00000000
flq: SourceRootPath - 'E:\Win7X86'
flq: SourceFilename - 'RTL8187.sys'
flq: TargetDirectory- 'X:\Users\Default\AppData\Local\Temp\{2acae291-e221-5164-9a29-9e575d24180b}'
flq: {FILE_QUEUE_COPY exit(0x00000000)}
flq: {_commit_file_queue}
flq: CommitQ DelNodes=0 RenNodes=0 CopyNodes=3
flq: {_commit_copy_subqueue}
flq: subqueue count=3
flq: source media:
flq: SourcePath -
flq: SourceFile -
flq: Flags - 0x00000000
flq: {_commit_copyfile}
flq: CopyFile: 'E:\Win7X86\netrtuw.cat'
flq: to: 'X:\Users\Default\AppData\Local\Temp\{2acae291-e221-5164-9a29-9e575d24180b}\SETCD25.tmp'
flq: MoveFile: 'X:\Users\Default\AppData\Local\Temp\{2acae291-e221-5164-9a29-9e575d24180b}\SETCD25.tmp'
flq: to: 'X:\Users\Default\AppData\Local\Temp\{2acae291-e221-5164-9a29-9e575d24180b}\netrtuw.cat'
flq: {_commit_copyfile exit OK}
flq: {_commit_copyfile}
flq: CopyFile: 'E:\Win7X86\Netrtuw.inf'
flq: to: 'X:\Users\Default\AppData\Local\Temp\{2acae291-e221-5164-9a29-9e575d24180b}\SETCD26.tmp'
flq: MoveFile: 'X:\Users\Default\AppData\Local\Temp\{2acae291-e221-5164-9a29-9e575d24180b}\SETCD26.tmp'
flq: to: 'X:\Users\Default\AppData\Local\Temp\{2acae291-e221-5164-9a29-9e575d24180b}\Netrtuw.inf'
flq: {_commit_copyfile exit OK}
flq: {_commit_copyfile}
flq: CopyFile: 'E:\Win7X86\RTL8187.sys'
flq: to: 'X:\Users\Default\AppData\Local\Temp\{2acae291-e221-5164-9a29-9e575d24180b}\SETCD55.tmp'
flq: MoveFile: 'X:\Users\Default\AppData\Local\Temp\{2acae291-e221-5164-9a29-9e575d24180b}\SETCD55.tmp'
flq: to: 'X:\Users\Default\AppData\Local\Temp\{2acae291-e221-5164-9a29-9e575d24180b}\RTL8187.sys'
flq: {_commit_copyfile exit OK}
flq: {_commit_copy_subqueue exit OK}
flq: {_commit_file_queue exit OK}
pol: {Driver package policy check} 23:30:22.578
pol: {Driver package policy check - exit(0x00000000)} 23:30:22.578
sto: {Stage Driver Package: X:\Users\Default\AppData\Local\Temp\{2acae291-e221-5164-9a29-9e575d24180b}\Netrtuw.inf} 23:30:22.578
inf: Opened INF: 'X:\Users\Default\AppData\Local\Temp\{2acae291-e221-5164-9a29-9e575d24180b}\Netrtuw.inf' ()
inf: Opened INF: 'X:\Users\Default\AppData\Local\Temp\{2acae291-e221-5164-9a29-9e575d24180b}\Netrtuw.inf' ()
sto: Copying driver package files:
sto: Source Path = X:\Users\Default\AppData\Local\Temp\{2acae291-e221-5164-9a29-9e575d24180b}
sto: Destination Path = X:\WINDOWS\System32\DriverStore\Temp\{7fe6b078-da5e-6ead-4cba-9f2a599be728}
flq: {FILE_QUEUE_COPY}
flq: CopyStyle - 0x00000010
flq: SourceRootPath - 'X:\Users\Default\AppData\Local\Temp\{2acae291-e221-5164-9a29-9e575d24180b}'
flq: SourceFilename - 'netrtuw.cat'
flq: TargetDirectory- 'X:\WINDOWS\System32\DriverStore\Temp\{7fe6b078-da5e-6ead-4cba-9f2a599be728}'
flq: {FILE_QUEUE_COPY exit(0x00000000)}
flq: {FILE_QUEUE_COPY}
flq: CopyStyle - 0x00000010
flq: SourceRootPath - 'X:\Users\Default\AppData\Local\Temp\{2acae291-e221-5164-9a29-9e575d24180b}'
flq: SourceFilename - 'Netrtuw.inf'
flq: TargetDirectory- 'X:\WINDOWS\System32\DriverStore\Temp\{7fe6b078-da5e-6ead-4cba-9f2a599be728}'
flq: {FILE_QUEUE_COPY exit(0x00000000)}
flq: {FILE_QUEUE_COPY}
flq: CopyStyle - 0x00000010
flq: SourceRootPath - 'X:\Users\Default\AppData\Local\Temp\{2acae291-e221-5164-9a29-9e575d24180b}'
flq: SourceFilename - 'RTL8187.sys'
flq: TargetDirectory- 'X:\WINDOWS\System32\DriverStore\Temp\{7fe6b078-da5e-6ead-4cba-9f2a599be728}'
flq: {FILE_QUEUE_COPY exit(0x00000000)}
flq: {_commit_file_queue}
flq: CommitQ DelNodes=0 RenNodes=0 CopyNodes=3
flq: {_commit_copy_subqueue}
flq: subqueue count=3
flq: source media:
flq: SourcePath -
flq: SourceFile -
flq: Flags - 0x00000000
flq: {_commit_copyfile}
flq: CopyFile: 'X:\Users\Default\AppData\Local\Temp\{2acae291-e221-5164-9a29-9e575d24180b}\netrtuw.cat'
flq: to: 'X:\WINDOWS\System32\DriverStore\Temp\{7fe6b078-da5e-6ead-4cba-9f2a599be728}\SETCDA2.tmp'
flq: MoveFile: 'X:\WINDOWS\System32\DriverStore\Temp\{7fe6b078-da5e-6ead-4cba-9f2a599be728}\SETCDA2.tmp'
flq: to: 'X:\WINDOWS\System32\DriverStore\Temp\{7fe6b078-da5e-6ead-4cba-9f2a599be728}\netrtuw.cat'
flq: {_commit_copyfile exit OK}
flq: {_commit_copyfile}
flq: CopyFile: 'X:\Users\Default\AppData\Local\Temp\{2acae291-e221-5164-9a29-9e575d24180b}\Netrtuw.inf'
flq: to: 'X:\WINDOWS\System32\DriverStore\Temp\{7fe6b078-da5e-6ead-4cba-9f2a599be728}\SETCDA3.tmp'
flq: MoveFile: 'X:\WINDOWS\System32\DriverStore\Temp\{7fe6b078-da5e-6ead-4cba-9f2a599be728}\SETCDA3.tmp'
flq: to: 'X:\WINDOWS\System32\DriverStore\Temp\{7fe6b078-da5e-6ead-4cba-9f2a599be728}\Netrtuw.inf'
flq: {_commit_copyfile exit OK}
flq: {_commit_copyfile}
flq: CopyFile: 'X:\Users\Default\AppData\Local\Temp\{2acae291-e221-5164-9a29-9e575d24180b}\RTL8187.sys'
flq: to: 'X:\WINDOWS\System32\DriverStore\Temp\{7fe6b078-da5e-6ead-4cba-9f2a599be728}\SETCDA4.tmp'
flq: MoveFile: 'X:\WINDOWS\System32\DriverStore\Temp\{7fe6b078-da5e-6ead-4cba-9f2a599be728}\SETCDA4.tmp'
flq: to: 'X:\WINDOWS\System32\DriverStore\Temp\{7fe6b078-da5e-6ead-4cba-9f2a599be728}\RTL8187.sys'
flq: {_commit_copyfile exit OK}
flq: {_commit_copy_subqueue exit OK}
flq: {_commit_file_queue exit OK}
sto: {DRIVERSTORE_IMPORT_NOTIFY_VALIDATE} 23:30:22.656
inf: Opened INF: 'X:\WINDOWS\System32\DriverStore\Temp\{7fe6b078-da5e-6ead-4cba-9f2a599be728}\Netrtuw.inf' ()
sto: Validating driver package files against catalog 'netrtuw.cat'.
sto: Driver package is valid.
sto: {DRIVERSTORE_IMPORT_NOTIFY_VALIDATE exit(0x00000000)} 23:30:22.671
sto: Verified driver package signature:
sto: Digital Signer Score = 0x00000000
sto: Digital Signer Name= <unknown>
sto: {DRIVERSTORE_IMPORT_NOTIFY_BEGIN} 23:30:22.671
ndv: System restore not required for signed driver package.
sto: {DRIVERSTORE_IMPORT_NOTIFY_BEGIN: exit(0x00000000)} 23:30:22.671
sto: Importing driver package files:
sto: Source Path = X:\WINDOWS\System32\DriverStore\Temp\{7fe6b078-da5e-6ead-4cba-9f2a599be728}
sto: Destination Path = X:\WINDOWS\System32\DriverStore\FileRepository\netrtuw.inf_x86_neutral_1116baaf4ebbe2a4
sto: {Copy Directory: X:\WINDOWS\System32\DriverStore\Temp\{7fe6b078-da5e-6ead-4cba-9f2a599be728}} 23:30:22.671
sto: Target Path = X:\WINDOWS\System32\DriverStore\FileRepository\netrtuw.inf_x86_neutral_1116baaf4ebbe2a4
sto: {Copy Directory: exit(0x00000000)} 23:30:22.687
sto: {Index Driver Package: X:\WINDOWS\System32\DriverStore\FileRepository\netrtuw.inf_x86_neutral_1116baaf4ebbe2a4\Netrtuw.inf} 23:30:22.687
idb: Registered driver store entry 'netrtuw.inf_x86_neutral_1116baaf4ebbe2a4'.
idb: Published 'netrtuw.inf_x86_neutral_1116baaf4ebbe2a4\netrtuw.inf' to 'X:\WINDOWS\INF\oem2.inf'
idb: Published driver store entry 'netrtuw.inf_x86_neutral_1116baaf4ebbe2a4'.
sto: Published driver package INF 'oem2.inf' was changed.
sto: Active published driver package is 'netrtuw.inf_x86_neutral_1116baaf4ebbe2a4'.
sto: {Index Driver Package: exit(0x00000000)} 23:30:22.718
sto: {DRIVERSTORE_IMPORT_NOTIFY_END} 23:30:22.718
ndv: No system restore point was set earlier.
sto: {DRIVERSTORE_IMPORT_NOTIFY_END: exit(0x00000000)} 23:30:22.718
sto: {Stage Driver Package: exit(0x00000000)} 23:30:22.718
ndv: Doing device matching lookup!
inf: Opened INF: 'X:\WINDOWS\System32\DriverStore\FileRepository\netrtuw.inf_x86_neutral_1116baaf4ebbe2a4\Netrtuw.inf' ()
sto: Driver package was staged to Driver Store. Time = 188 ms
sto: Imported driver package into Driver Store:
sto: Filename = X:\WINDOWS\System32\DriverStore\FileRepository\netrtuw.inf_x86_neutral_1116baaf4ebbe2a4\Netrtuw.inf
sto: Time = 266 ms
sto: {Import Driver Package: exit(0x00000000)} 23:30:22.750
inf: Opened INF: 'E:\Win7X86\Netrtuw.inf' ()
inf: Driver Store location: X:\WINDOWS\System32\DriverStore\FileRepository\netrtuw.inf_x86_neutral_1116baaf4ebbe2a4\Netrtuw.inf
inf: Published Inf Path: X:\WINDOWS\INF\oem2.inf
inf: Opened INF: 'E:\Win7X86\Netrtuw.inf' ()
inf: Installing catalog netrtuw.cat as: oem2.CAT
inf: OEM source media location: E:\Win7X86\
inf: {SetupCopyOEMInf exit (0x00000000)} 23:30:22.765
inf: Opened INF: 'E:\Win7X86\Netrtuw.inf' ()
dvi: Set selected driver complete.
dvi: {Build Driver List} 23:30:22.796
dvi: Searching for hardware ID(s):
dvi: usb\vid_0bda&pid_8187&rev_0100
dvi: usb\vid_0bda&pid_8187
dvi: Searching for compatible ID(s):
dvi: usb\class_00&subclass_00&prot_00
dvi: usb\class_00&subclass_00
dvi: usb\class_00
cpy: Policy is set to make all digital signatures equal.
dvi: Processing a single INF: 'e:\win7x86\netrtuw.inf'
inf: Opened INF: 'e:\win7x86\netrtuw.inf' ()
dvi: Created Driver Node:
dvi: HardwareID - USB\VID_0BDA&PID_8187&REV_0100
dvi: InfName - e:\win7x86\netrtuw.inf
dvi: DevDesc - Realtek RTL8187 Wireless 802.11b/g 54Mbps USB 2.0 Network Adapter
dvi: DrvDesc - Realtek RTL8187 Wireless 802.11b/g 54Mbps USB 2.0 Network Adapter
dvi: Provider - Realtek Semiconductor Corp.
dvi: Mfg - Realtek Semiconductor Corp.
dvi: ModelsSec - Realtek.NTx86.6.1
dvi: InstallSec - RTL8187.ndi
dvi: ActualSec - RTL8187.ndi.NT
dvi: Rank - 0xf0ff0000
dvi: Signer -
dvi: Signer Score - Not digitally signed
dvi: DrvDate - 12/09/2009
dvi: Version - 6.1316.1209.2009
dvi: {Build Driver List - exit(0x00000000)} 23:30:22.812
dvi: {Build Driver List} 23:30:22.812
dvi: Searching for hardware ID(s):
dvi: usb\vid_0bda&pid_8187&rev_0100
dvi: usb\vid_0bda&pid_8187
dvi: Searching for compatible ID(s):
dvi: usb\class_00&subclass_00&prot_00
dvi: usb\class_00&subclass_00
dvi: usb\class_00
cpy: Policy is set to make all digital signatures equal.
dvi: Unable to retrieve InfPath - likely no driver installed
dvi: {Build Driver List - exit(0x00000000)} 23:30:22.812
dvi: {DIF_SELECTBESTCOMPATDRV} 23:30:22.812
dvi: Using exported function 'NetClassInstaller' in module 'X:\WINDOWS\system32\NetCfgx.dll'.
dvi: Class installer == NetCfgx.dll,NetClassInstaller
dvi: Using exported function 'NciDeviceInstall' in module 'X:\WINDOWS\system32\nci.dll'.
dvi: CoInstaller 1 == nci.dll,NciDeviceInstall
dvi: Using exported function 'WlanDeviceClassCoInstaller' in module 'X:\WINDOWS\system32\wlaninst.dll'.
dvi: CoInstaller 2 == wlaninst.dll,WlanDeviceClassCoInstaller
dvi: Using exported function 'WwanDeviceClassCoInstaller' in module 'X:\WINDOWS\system32\wwaninst.dll'.
dvi: CoInstaller 3 == wwaninst.dll,WwanDeviceClassCoInstaller
dvi: CoInstaller 1: Enter 23:30:22.812
dvi: CoInstaller 1: Exit
dvi: CoInstaller 2: Enter 23:30:22.812
dvi: CoInstaller 2: Exit
dvi: CoInstaller 3: Enter 23:30:22.812
dvi: CoInstaller 3: Exit
dvi: Class installer: Enter 23:30:22.812
dvi: Class installer: Exit
dvi: Default installer: Enter 23:30:22.812
dvi: {Select Best Driver}
dvi: Selected driver installs from section in 'e:\win7x86\netrtuw.inf'.
dvi: Class GUID of device changed to: {4d36e972-e325-11ce-bfc1-08002be10318}.
dvi: {DIF_DESTROYPRIVATEDATA} 23:30:22.812
dvi: CoInstaller 1: Enter 23:30:22.812
dvi: CoInstaller 1: Exit
dvi: CoInstaller 2: Enter 23:30:22.812
dvi: CoInstaller 2: Exit
dvi: CoInstaller 3: Enter 23:30:22.812
dvi: CoInstaller 3: Exit
dvi: Class installer: Enter 23:30:22.812
dvi: Class installer: Exit
dvi: {DIF_DESTROYPRIVATEDATA - exit(0x00000000)} 23:30:22.812
dvi: Set selected driver complete.
dvi: Selected:
dvi: Description -
dvi: InfFile -
dvi: Section -
dvi: Signer - []
dvi: Rank -
dvi: {Select Best Driver - exit(0x00000000)}
dvi: Default installer: Exit
dvi: {DIF_SELECTBESTCOMPATDRV - exit(0x00000000)} 23:30:22.828
inf: {SetupCopyOEMInf: e:\win7x86\netrtuw.inf} 23:30:22.828
! inf: Package was already in store: skipping Driver Store add
inf: Driver Store location: X:\WINDOWS\System32\DriverStore\FileRepository\netrtuw.inf_x86_neutral_1116baaf4ebbe2a4\netrtuw.inf
inf: Published Inf Path: X:\WINDOWS\INF\oem2.inf
inf: OEM source media location: e:\win7x86\
inf: {SetupCopyOEMInf exit (0x00000000)} 23:30:22.828
dvi: Searching for hardware ID(s):
dvi: usb\vid_0bda&pid_8187&rev_0100
dvi: usb\vid_0bda&pid_8187
dvi: Searching for compatible ID(s):
dvi: usb\class_00&subclass_00&prot_00
dvi: usb\class_00&subclass_00
dvi: usb\class_00
inf: Opened INF: 'X:\WINDOWS\System32\DriverStore\FileRepository\netrtuw.inf_x86_neutral_1116baaf4ebbe2a4\netrtuw.inf' ()
dvi: Selected driver installs from section in 'x:\windows\system32\driverstore\filerepository\netrtuw.inf_x86_neutral_1116baaf4ebbe2a4\netrtuw.inf'.
dvi: Class GUID of device changed to: {4d36e972-e325-11ce-bfc1-08002be10318}.
dvi: Set selected driver complete.
dvi: {Plug and Play Service: Device Install for USB\VID_0BDA&PID_8187\380A0AA13C23}
ump: Creating Install Process: DrvInst.exe 23:30:22.843
ndv: Infpath=X:\WINDOWS\INF\oem2.inf
ndv: DriverNodeName=netrtuw.inf:Realtek.NTx86.6.1:RTL8187.ndi:6.1316.1209.2009:usb\vid_0bda&pid_8187&rev_0100
ndv: DriverStorepath=X:\WINDOWS\System32\DriverStore\FileRepository\netrtuw.inf_x86_neutral_1116baaf4ebbe2a4\netrtuw.inf
ndv: Building driver list from driver node strong name...
dvi: Searching for hardware ID(s):
dvi: usb\vid_0bda&pid_8187&rev_0100
dvi: usb\vid_0bda&pid_8187
dvi: Searching for compatible ID(s):
dvi: usb\class_00&subclass_00&prot_00
dvi: usb\class_00&subclass_00
dvi: usb\class_00
inf: Opened INF: 'X:\WINDOWS\System32\DriverStore\FileRepository\netrtuw.inf_x86_neutral_1116baaf4ebbe2a4\netrtuw.inf' ()
dvi: Selected driver installs from section in 'x:\windows\system32\driverstore\filerepository\netrtuw.inf_x86_neutral_1116baaf4ebbe2a4\netrtuw.inf'.
dvi: Class GUID of device changed to: {4d36e972-e325-11ce-bfc1-08002be10318}.
dvi: Set selected driver complete.
ndv: {Core Device Install} 23:30:22.859
inf: Opened INF: 'X:\WINDOWS\INF\oem2.inf' ()
dvi: {DIF_ALLOW_INSTALL} 23:30:22.906
dvi: Using exported function 'NetClassInstaller' in module 'X:\WINDOWS\system32\NetCfgx.dll'.
dvi: Class installer == NetCfgx.dll,NetClassInstaller
dvi: Using exported function 'NciDeviceInstall' in module 'X:\WINDOWS\system32\nci.dll'.
dvi: CoInstaller 1 == nci.dll,NciDeviceInstall
dvi: Using exported function 'WlanDeviceClassCoInstaller' in module 'X:\WINDOWS\system32\wlaninst.dll'.
dvi: CoInstaller 2 == wlaninst.dll,WlanDeviceClassCoInstaller
dvi: Using exported function 'WwanDeviceClassCoInstaller' in module 'X:\WINDOWS\system32\wwaninst.dll'.
dvi: CoInstaller 3 == wwaninst.dll,WwanDeviceClassCoInstaller
dvi: CoInstaller 1: Enter 23:30:22.906
dvi: CoInstaller 1: Exit
dvi: CoInstaller 2: Enter 23:30:22.906
dvi: CoInstaller 2: Exit
dvi: CoInstaller 3: Enter 23:30:22.906
dvi: CoInstaller 3: Exit
dvi: Class installer: Enter 23:30:22.906
inf: Opened INF: 'X:\WINDOWS\INF\oem2.inf' ()
inf: AddReg=RTL8187.common.reg,RTLWLAN.reg,RTL8187_os61.reg(oem2.inf line 62)
dvi: Class installer: Exit
dvi: Default installer: Enter 23:30:22.921
dvi: Default installer: Exit
dvi: {DIF_ALLOW_INSTALL - exit(0xe000020e)} 23:30:22.921
ndv: Installing files...
dvi: {DIF_INSTALLDEVICEFILES} 23:30:22.921
dvi: CoInstaller 1: Enter 23:30:22.921
dvi: CoInstaller 1: Exit
dvi: CoInstaller 2: Enter 23:30:22.921
dvi: CoInstaller 2: Exit
dvi: CoInstaller 3: Enter 23:30:22.921
dvi: CoInstaller 3: Exit
dvi: Class installer: Enter 23:30:22.921
dvi: Class installer: Exit
dvi: Default installer: Enter 23:30:22.921
dvi: {Install FILES}
inf: Opened INF: 'x:\windows\system32\driverstore\filerepository\netrtuw.inf_x86_neutral_1116baaf4ebbe2a4\netrtuw.inf' ()
inf: {Install Inf Section }
inf: CopyFiles=RTL8187.CopyFiles(netrtuw.inf line 65)
cpy: Open PnpLockdownPolicy: Err=2. This is OK. Use LockDownPolicyDefault
flq: QueueSingleCopy...
flq: Inf : 'x:\windows\system32\driverstore\filerepository\netrtuw.inf_x86_neutral_1116baaf4ebbe2a4\netrtuw.inf'
flq: SourceInf: 'x:\windows\system32\driverstore\filerepository\netrtuw.inf_x86_neutral_1116baaf4ebbe2a4\netrtuw.inf'
flq: SourceSection:
flq: Source root path based on SourceInf
flq: SourceRootPath: 'X:\WINDOWS\System32\DriverStore\FileRepository\netrtuw.inf_x86_neutral_1116baaf4ebbe2a4'
flq: {FILE_QUEUE_COPY}
flq: CopyStyle - 0x00000400
flq: {FILE_QUEUE_COPY}
flq: CopyStyle - 0x00000400
flq: SourceRootPath - 'X:\WINDOWS\System32\DriverStore\FileRepository\netrtuw.inf_x86_neutral_1116baaf4ebbe2a4'
flq: SourceFilename - 'RTL8187.sys'
flq: TargetDirectory- 'X:\WINDOWS\system32\DRIVERS'
flq: TargetFilename - 'RTL8187.sys'
flq: SourceDesc - 'Realtek RTL8187 Wireless 802.11b/g 54Mbps USB 2.0 Network Adapter Driver Disk'
flq: {FILE_QUEUE_COPY exit(0x00000000)}
flq: {FILE_QUEUE_COPY exit(0x00000000)}
inf: {Install Inf Section exit (0x00000000)}
dvi: Processing co-installer registration section .
inf: {Install Inf Section }
inf: {Install Inf Section exit (0x00000000)}
dvi: Co-installers registered.
dvi: {Install INTERFACES}
dvi: Installing section
dvi: {Install INTERFACES exit 00000000}
dvi: {Install FILES exit (0x00000000)}
dvi: Default installer: Exit
dvi: {DIF_INSTALLDEVICEFILES - exit(0x00000000)} 23:30:22.937
ndv: Pruning file queue...
dvi: {_SCAN_FILE_QUEUE}
flq: ScanQ flags=620
flq: SPQ_SCAN_PRUNE_COPY_QUEUE
flq: SPQ_SCAN_FILE_COMPARISON
flq: SPQ_SCAN_ACTIVATE_DRP
flq: ScanQ number of copy nodes=1
flq: ScanQ action=200 DoPruning=32
flq: ScanQ end Validity flags=620 CopyNodes=1
dvi: {_SCAN_FILE_QUEUE exit(0, 0x00000000)}
ndv: Committing file queue...
flq: {_commit_file_queue}
flq: CommitQ DelNodes=0 RenNodes=0 CopyNodes=1
flq: {SPFILENOTIFY_STARTQUEUE}
flq: {SPFILENOTIFY_STARTQUEUE - exit(0x00000001)}
flq: {_commit_copy_subqueue}
flq: subqueue count=1
flq: {SPFILENOTIFY_STARTSUBQUEUE}
flq: {SPFILENOTIFY_STARTSUBQUEUE - exit(0x00000001)}
flq: source media:
flq: Description-
flq: SourcePath -
flq: SourceFile -
flq: Flags - 0x00000400
flq: {SPFQNOTIFY_NEEDMEDIA}
flq: {SPFILENOTIFY_NEEDMEDIA}
flq: {SPFILENOTIFY_NEEDMEDIA - exit(0x00000001)}
flq: {SPFQNOTIFY_NEEDMEDIA - returned 0x00000001}
flq: source media: SPFQOPERATION_DOIT
flq: {_commit_copyfile}
flq: {SPFILENOTIFY_STARTCOPY}
ndv: Saving LastKnownGood file X:\WINDOWS\system32\DRIVERS\RTL8187.sys (copy)
flq: {SPFILENOTIFY_STARTCOPY - exit(0x00000001)}
flq: CopyFile: 'X:\WINDOWS\System32\DriverStore\FileRepository\netrtuw.inf_x86_neutral_1116baaf4ebbe2a4\RTL8187.sys'
flq: to: 'X:\WINDOWS\system32\DRIVERS\SETCEDA.tmp'
cpy: CopyFile Drp is active
cpy: Source File 'X:\WINDOWS\system32\DRIVERS\SETCEDA.tmp' is NOT signed NT5 Crypto.
cpy: DrpGetFileProt Status=2 dwClass=0
flq: MoveFile: 'X:\WINDOWS\system32\DRIVERS\SETCEDA.tmp'
flq: to: 'X:\WINDOWS\system32\DRIVERS\RTL8187.sys'
cpy: DrpSetRegFileProt 'X:\WINDOWS\system32\DRIVERS\RTL8187.sys' Status=0 Class=OEM Legacy
flq: Caller applied security to file 'X:\WINDOWS\system32\DRIVERS\RTL8187.sys'.
flq: {SPFILENOTIFY_ENDCOPY}
flq: {SPFILENOTIFY_ENDCOPY - exit(0x00000001)}
flq: {_commit_copyfile exit OK}
flq: {SPFILENOTIFY_ENDSUBQUEUE}
flq: {SPFILENOTIFY_ENDSUBQUEUE - exit(0x00000001)}
flq: {_commit_copy_subqueue exit OK}
flq: {SPFILENOTIFY_ENDQUEUE}
flq: {SPFILENOTIFY_ENDQUEUE - exit(0x00000001)}
flq: {_commit_file_queue exit OK}
ndv: Registering CoInstallers...
dvi: {DIF_REGISTER_COINSTALLERS} 23:30:22.968
dvi: CoInstaller 1: Enter 23:30:22.968
dvi: CoInstaller 1: Exit
dvi: CoInstaller 2: Enter 23:30:22.968
dvi: CoInstaller 2: Exit
dvi: CoInstaller 3: Enter 23:30:22.968
dvi: CoInstaller 3: Exit
dvi: Class installer: Enter 23:30:22.968
dvi: Class installer: Exit
dvi: Default installer: Enter 23:30:22.968
inf: Opened INF: 'x:\windows\system32\driverstore\filerepository\netrtuw.inf_x86_neutral_1116baaf4ebbe2a4\netrtuw.inf' ()
inf: {Install Inf Section }
inf: {Install Inf Section exit (0x00000000)}
dvi: {DIF_DESTROYPRIVATEDATA} 23:30:22.968
dvi: CoInstaller 1: Enter 23:30:22.968
dvi: CoInstaller 1: Exit
dvi: CoInstaller 2: Enter 23:30:22.968
dvi: CoInstaller 2: Exit
dvi: CoInstaller 3: Enter 23:30:22.968
dvi: CoInstaller 3: Exit
dvi: Class installer: Enter 23:30:22.984
dvi: Class installer: Exit
dvi: {DIF_DESTROYPRIVATEDATA - exit(0x00000000)} 23:30:22.984
dvi: Co-installers registered.
dvi: Default installer: Exit
dvi: {DIF_REGISTER_COINSTALLERS - exit(0x00000000)} 23:30:22.984
ndv: Installing interfaces...
dvi: {DIF_INSTALLINTERFACES} 23:30:22.984
dvi: Using exported function 'NciDeviceInstall' in module 'X:\WINDOWS\system32\nci.dll'.
dvi: CoInstaller 1 == nci.dll,NciDeviceInstall
dvi: Using exported function 'WlanDeviceClassCoInstaller' in module 'X:\WINDOWS\system32\wlaninst.dll'.
dvi: CoInstaller 2 == wlaninst.dll,WlanDeviceClassCoInstaller
dvi: Using exported function 'WwanDeviceClassCoInstaller' in module 'X:\WINDOWS\system32\wwaninst.dll'.
dvi: CoInstaller 3 == wwaninst.dll,WwanDeviceClassCoInstaller
dvi: CoInstaller 1: Enter 23:30:22.984
dvi: CoInstaller 1: Exit
dvi: CoInstaller 2: Enter 23:30:22.984
dvi: CoInstaller 2: Exit
dvi: CoInstaller 3: Enter 23:30:22.984
dvi: CoInstaller 3: Exit
dvi: Class installer: Enter 23:30:22.984
dvi: Class installer: Exit
dvi: Default installer: Enter 23:30:22.984
dvi: {Install INTERFACES}
inf: Opened INF: 'x:\windows\system32\driverstore\filerepository\netrtuw.inf_x86_neutral_1116baaf4ebbe2a4\netrtuw.inf' ()
dvi: Installing section
dvi: {Install INTERFACES exit 00000000}
dvi: Default installer: Exit
dvi: {DIF_INSTALLINTERFACES - exit(0x00000000)} 23:30:22.984
ndv: Installing device...
dvi: {DIF_INSTALLDEVICE} 23:30:22.984
dvi: CoInstaller 1: Enter 23:30:22.984
cci:
cci: NdisCoinst: NetCfgInstanceId does not exist
cci: NdisCoinst: Guid of the adapter is {207504ED-00BC-4825-9873-44356EAFAB6B}
inf: Opened INF: 'X:\WINDOWS\INF\oem2.inf' ()
cci: NdisCoinst: IfType from registry is 71
cci: NdisCoinst: IfType 71, Characteristics 0x84, IsIrdaDevice 0, PhysicalMediaType 9, MediaType 16, IsBridge 0, FoundGuidInDownlevel 0, EnableDhcp 2
cci: NdisCoinst: Connection name is 无线网络连接
cci: NdisCoinst: NetLuidIndex does not exist
cci: NdisCoinst: Allocated NetLuidIndex is 0
cci:
dvi: CoInstaller 1: Exit
dvi: CoInstaller 2: Enter 23:30:23.000
inf: Opened INF: 'X:\WINDOWS\INF\oem2.inf' ()
dvi: CoInstaller 2: Exit
dvi: CoInstaller 3: Enter 23:30:23.000
inf: Opened INF: 'X:\WINDOWS\INF\oem2.inf' ()
dvi: CoInstaller 3: Exit
dvi: Class installer: Enter 23:30:23.000
cci:
inf: Opened INF: 'X:\WINDOWS\INF\oem2.inf' ()
cci: NCI: NewDeviceInstall is 1, assume new install
inf: AddReg=RTL8187.common.reg,RTLWLAN.reg,RTL8187_os61.reg(oem2.inf line 62)
cci: NCI: Fresh install of device. DI_DONOTCALLCONFIGMG flag set. Device will be started after bindings
dvi: {Install DEVICE}
inf: Opened INF: 'x:\windows\system32\driverstore\filerepository\netrtuw.inf_x86_neutral_1116baaf4ebbe2a4\netrtuw.inf' ()
dvi: Processing Registry/Property directives...
inf: {Install Inf Section }
inf: AddReg=RTL8187.common.reg,RTLWLAN.reg,RTL8187_os61.reg(netrtuw.inf line 62)
inf: {Install Inf Section exit (0x00000000)}
inf: {Install Inf Section }
inf: AddReg=RTL8187_os61.vwifi.reg(netrtuw.inf line 74)
inf: {Install Inf Section exit (0x00000000)}
下贴继续。。。 接上帖：
dvi: {Writing Device Properties}
dvi: Provider name=Realtek Semiconductor Corp.
dvi: DriverDate 12/09/2009
dvi: DriverVersion=6.1316.1209.2009
dvi: Class name=Net
dvi: Manufacturer=Realtek Semiconductor Corp.
dvi: Matching DeviceID=usb\vid_0bda&pid_8187&rev_0100
dvi: Strong Name=oem2.inf:Realtek.NTx86.6.1:RTL8187.ndi:6.1316.1209.2009:usb\vid_0bda&pid_8187&rev_0100
dvi: {Writing Device Properties - Complete}
inf: {Install Inf Section }
inf: AddService=RTL8187,2,RTL8187.nt61.Service,RTL8187.nt61.EventLog(netrtuw.inf line 71)
inf: ServiceType=1(netrtuw.inf line 86)
inf: StartType=3(netrtuw.inf line 87)
inf: ErrorControl=1(netrtuw.inf line 88)
inf: ServiceBinary=X:\WINDOWS\system32\DRIVERS\rtl8187.sys(netrtuw.inf line 89)
inf: DisplayName="Realtek RTL8187 Wireless 802.11b/g 54Mbps USB 2.0 Network Adapter"(netrtuw.inf line 85)
inf: LoadOrderGroup=NDIS(netrtuw.inf line 90)
dvi: Add Service: Created service 'RTL8187'.
inf: AddReg=RTL8187.nt61.AddEventLog.reg(netrtuw.inf line 93)
inf: {Install Inf Section exit(0x00000000)}
dvi: Updated reflected section names for: oem2.inf
dvi: {Install DEVICE exit (0x00000000)}
dvi: Writing common driver property settings.
dvi: DriverDescription=Realtek RTL8187 Wireless 802.11b/g 54Mbps USB 2.0 Network Adapter
dvi: DeviceDisplayName=Realtek RTL8187 Wireless 802.11b/g 54Mbps USB 2.0 Network Adapter
! dvi: Device restart was skipped becasuse the DI_DONOTCALLCONFIGMGflag was set.
cci: NCI: Device installed. Clearing DI_DONOTCALLCONFIGMG flag.
cci:
cci: NCI: INetCfg Installer Interface asking for write lock. 23:30:23.046
cci: NCI: INetCfg Installer Interface acquired write lock. 23:30:23.046
cci: NCI: Init Notify Object for ms_msclient
cci: NCI: Init Notify Object for ms_msclient complete
cci: NCI: Init Notify Object for ms_tcpip
cci: NCI: Init Notify Object for ms_tcpip complete
cci: NCI: Init Notify Object for ms_tcpip6
cci: NCI: Init Notify Object for ms_tcpip6 complete
cci:
cci:
cci: NCI: pnp id USB\VID_0BDA&PID_8187\380A0AA13C23
cci:
cci:
cci:
cci: NCI: Number of components 9
cci: NCI: Number of stack entries 14
cci: NCI: Number of disabled bindpaths 0
cci: NCI: Number of components being referenced 7
cci: NCI: cbBuf - 932, cbBufIn - 932
cci:
cci:
cci: NCI:
cci: NCI: Writing Network Linkage information for ms_netbios
cci: NCI: Bind:
cci: NCI: \Device\NetBT_Tcpip6_{207504ED-00BC-4825-9873-44356EAFAB6B}
cci: NCI: \Device\NetBT_Tcpip6_{BA43852C-210F-4FC4-AD4C-D8E0B7EAA5B4}
cci: NCI: \Device\NetBT_Tcpip_{207504ED-00BC-4825-9873-44356EAFAB6B}
cci: NCI: \Device\NetBT_Tcpip_{BA43852C-210F-4FC4-AD4C-D8E0B7EAA5B4}
cci: NCI: Export:
cci: NCI: \Device\NetBIOS_NetBT_Tcpip6_{207504ED-00BC-4825-9873-44356EAFAB6B}
cci: NCI: \Device\NetBIOS_NetBT_Tcpip6_{BA43852C-210F-4FC4-AD4C-D8E0B7EAA5B4}
cci: NCI: \Device\NetBIOS_NetBT_Tcpip_{207504ED-00BC-4825-9873-44356EAFAB6B}
cci: NCI: \Device\NetBIOS_NetBT_Tcpip_{BA43852C-210F-4FC4-AD4C-D8E0B7EAA5B4}
cci:
cci: NCI: Calling NdisHandlePnPEvent with
cci: NCI: NetBIOS \Device\NetBT_Tcpip6_{207504ED-00BC-4825-9873-44356EAFAB6B}
cci: NCI: NdisHandlePnPEvent result 0x00000001
cci: NCI:
cci: NCI: Writing Network Linkage information for ms_msclient
cci: NCI: Bind:
cci: NCI: \Device\Smb_Tcpip6_{207504ED-00BC-4825-9873-44356EAFAB6B}
cci: NCI: \Device\Smb_Tcpip6_{BA43852C-210F-4FC4-AD4C-D8E0B7EAA5B4}
cci: NCI: \Device\Smb_Tcpip_{207504ED-00BC-4825-9873-44356EAFAB6B}
cci: NCI: \Device\Smb_Tcpip_{BA43852C-210F-4FC4-AD4C-D8E0B7EAA5B4}
cci: NCI: \Device\NetbiosSmb
cci: NCI: \Device\Tcpip_{207504ED-00BC-4825-9873-44356EAFAB6B}
cci: NCI: \Device\Tcpip_{BA43852C-210F-4FC4-AD4C-D8E0B7EAA5B4}
cci: NCI: \Device\Tcpip6_{207504ED-00BC-4825-9873-44356EAFAB6B}
cci: NCI: \Device\Tcpip6_{BA43852C-210F-4FC4-AD4C-D8E0B7EAA5B4}
cci: NCI: \Device\NetBT_Tcpip6_{207504ED-00BC-4825-9873-44356EAFAB6B}
cci: NCI: \Device\NetBT_Tcpip6_{BA43852C-210F-4FC4-AD4C-D8E0B7EAA5B4}
cci: NCI: \Device\NetBT_Tcpip_{207504ED-00BC-4825-9873-44356EAFAB6B}
cci: NCI: \Device\NetBT_Tcpip_{BA43852C-210F-4FC4-AD4C-D8E0B7EAA5B4}
cci: NCI: Export:
cci: NCI: \Device\LanmanWorkstation_Smb_Tcpip6_{207504ED-00BC-4825-9873-44356EAFAB6B}
cci: NCI: \Device\LanmanWorkstation_Smb_Tcpip6_{BA43852C-210F-4FC4-AD4C-D8E0B7EAA5B4}
cci: NCI: \Device\LanmanWorkstation_Smb_Tcpip_{207504ED-00BC-4825-9873-44356EAFAB6B}
cci: NCI: \Device\LanmanWorkstation_Smb_Tcpip_{BA43852C-210F-4FC4-AD4C-D8E0B7EAA5B4}
cci: NCI: \Device\LanmanWorkstation_NetbiosSmb
cci: NCI: \Device\LanmanWorkstation_Tcpip_{207504ED-00BC-4825-9873-44356EAFAB6B}
cci: NCI: \Device\LanmanWorkstation_Tcpip_{BA43852C-210F-4FC4-AD4C-D8E0B7EAA5B4}
cci: NCI: \Device\LanmanWorkstation_Tcpip6_{207504ED-00BC-4825-9873-44356EAFAB6B}
cci: NCI: \Device\LanmanWorkstation_Tcpip6_{BA43852C-210F-4FC4-AD4C-D8E0B7EAA5B4}
cci: NCI: \Device\LanmanWorkstation_NetBT_Tcpip6_{207504ED-00BC-4825-9873-44356EAFAB6B}
cci: NCI: \Device\LanmanWorkstation_NetBT_Tcpip6_{BA43852C-210F-4FC4-AD4C-D8E0B7EAA5B4}
cci: NCI: \Device\LanmanWorkstation_NetBT_Tcpip_{207504ED-00BC-4825-9873-44356EAFAB6B}
cci: NCI: \Device\LanmanWorkstation_NetBT_Tcpip_{BA43852C-210F-4FC4-AD4C-D8E0B7EAA5B4}
cci:
cci: NCI: Calling NdisHandlePnPEvent with
cci: NCI: LanmanWorkstation \Device\Smb_Tcpip6_{207504ED-00BC-4825-9873-44356EAFAB6B}
cci: NCI: NdisHandlePnPEvent result 0x00000001
cci: NCI:
cci: NCI: Writing Network Linkage information for ms_tcpip6
cci: NCI: Bind:
cci: NCI: \Device\{207504ED-00BC-4825-9873-44356EAFAB6B}
cci: NCI: \Device\{BA43852C-210F-4FC4-AD4C-D8E0B7EAA5B4}
cci: NCI: Export:
cci: NCI: \Device\Tcpip6_{207504ED-00BC-4825-9873-44356EAFAB6B}
cci: NCI: \Device\Tcpip6_{BA43852C-210F-4FC4-AD4C-D8E0B7EAA5B4}
cci:
cci: NCI: Calling NdisHandlePnPEvent with
cci: NCI: Tcpip6 \Device\{207504ED-00BC-4825-9873-44356EAFAB6B}
cci: NCI: NdisHandlePnPEvent result 0x00000001
cci: NCI:
cci: NCI: Writing Network Linkage information for ms_smb
cci: NCI: Bind:
cci: NCI: \Device\Tcpip6_{207504ED-00BC-4825-9873-44356EAFAB6B}
cci: NCI: \Device\Tcpip6_{BA43852C-210F-4FC4-AD4C-D8E0B7EAA5B4}
cci: NCI: \Device\Tcpip_{207504ED-00BC-4825-9873-44356EAFAB6B}
cci: NCI: \Device\Tcpip_{BA43852C-210F-4FC4-AD4C-D8E0B7EAA5B4}
cci: NCI: Export:
cci: NCI: \Device\Smb_Tcpip6_{207504ED-00BC-4825-9873-44356EAFAB6B}
cci: NCI: \Device\Smb_Tcpip6_{BA43852C-210F-4FC4-AD4C-D8E0B7EAA5B4}
cci: NCI: \Device\Smb_Tcpip_{207504ED-00BC-4825-9873-44356EAFAB6B}
cci: NCI: \Device\Smb_Tcpip_{BA43852C-210F-4FC4-AD4C-D8E0B7EAA5B4}
cci:
cci: NCI: Calling NdisHandlePnPEvent with
cci: NCI: Smb \Device\Tcpip6_{207504ED-00BC-4825-9873-44356EAFAB6B}
cci: NCI: NdisHandlePnPEvent result 0x00000001
cci: NCI:
cci: NCI: Writing Network Linkage information for ms_netbt
cci: NCI: Bind:
cci: NCI: \Device\Tcpip6_{207504ED-00BC-4825-9873-44356EAFAB6B}
cci: NCI: \Device\Tcpip6_{BA43852C-210F-4FC4-AD4C-D8E0B7EAA5B4}
cci: NCI: \Device\Tcpip_{207504ED-00BC-4825-9873-44356EAFAB6B}
cci: NCI: \Device\Tcpip_{BA43852C-210F-4FC4-AD4C-D8E0B7EAA5B4}
cci: NCI: Export:
cci: NCI: \Device\NetBT_Tcpip6_{207504ED-00BC-4825-9873-44356EAFAB6B}
cci: NCI: \Device\NetBT_Tcpip6_{BA43852C-210F-4FC4-AD4C-D8E0B7EAA5B4}
cci: NCI: \Device\NetBT_Tcpip_{207504ED-00BC-4825-9873-44356EAFAB6B}
cci: NCI: \Device\NetBT_Tcpip_{BA43852C-210F-4FC4-AD4C-D8E0B7EAA5B4}
cci:
cci: NCI: Calling NdisHandlePnPEvent with
cci: NCI: NetBT \Device\Tcpip6_{207504ED-00BC-4825-9873-44356EAFAB6B}
cci: NCI: NdisHandlePnPEvent result 0x00000001
cci: NCI:
cci: NCI: Writing Network Linkage information for ms_tcpip
cci: NCI: Bind:
cci: NCI: \Device\{207504ED-00BC-4825-9873-44356EAFAB6B}
cci: NCI: \Device\{BA43852C-210F-4FC4-AD4C-D8E0B7EAA5B4}
cci: NCI: Export:
cci: NCI: \Device\Tcpip_{207504ED-00BC-4825-9873-44356EAFAB6B}
cci: NCI: \Device\Tcpip_{BA43852C-210F-4FC4-AD4C-D8E0B7EAA5B4}
cci:
cci: NCI: Calling NdisHandlePnPEvent with
cci: NCI: Tcpip \Device\{207504ED-00BC-4825-9873-44356EAFAB6B}
cci: NCI: NdisHandlePnPEvent result 0x00000001
cci: NCI:
cci: NCI: Writing Network Linkage information for USB\VID_0BDA&PID_8187\380A0AA13C23
cci: NCI: UpperBind:
cci: NCI: Tcpip6
cci: NCI: Tcpip
cci: NCI: Export:
cci: NCI: \Device\{207504ED-00BC-4825-9873-44356EAFAB6B}
cci:
cci: NCI: Calling NdisHandlePnPEvent with
cci: NCI: {207504ED-00BC-4825-9873-44356EAFAB6B} Tcpip6
cci: NCI: NdisHandlePnPEvent result 0x00000000
cci:
cci:
cci: NCI: Calling ms_msclient ApplyRegistryChanges
cci: NCI: Calling ms_tcpip6 ApplyRegistryChanges
cci: NCI: Calling ms_tcpip ApplyRegistryChanges
cci:
cci:
cci: Reboot = 0
cci:
cci:
cci:
cci:
cci:
cci: NCI: Starting device USB\VID_0BDA&PID_8187\380A0AA13C23
cci: NCI: SP_DEVINSTALL_PARAMS.Flags 0x01800028. Set result 0x800703ec
cci: NCI: SP_DEVINSTALL_PARAMS.FlagsEx 0x00011000. Set result: 0x00000000
dvi: {Restarting Devices} 23:30:23.109
! dvi: Can't find service vwifibus
! dvi: Failed to retrieve list of devices using this driver
dvi: {Restarting Devices exit} 23:30:23.109
cci:
cci:
! cci: !NCI: Op=BIND, Layer=NDIS, Upper=Tcpip Lower=\Device\{207504ED-00BC-4825-9873-44356EAFAB6B}, Error=00000002
! cci: !NCI: Op=BIND, Layer=NDIS, Upper=Tcpip6 Lower=\Device\{207504ED-00BC-4825-9873-44356EAFAB6B}, Error=00000002
cci: . Reboot 0
cci:
cci: NCI: Calling ms_msclient ApplyPnpChanges
cci: NCI: Calling ms_tcpip6 ApplyPnpChanges
cci: NCI: Calling ms_tcpip ApplyPnpChanges
cci:
cci: NCI: INetCfg Installer Interface Released write lock. 23:30:23.109
cci:
cci:
cci:
dvi: Class installer: Exit
dvi: CoInstaller 2: Enter (Post Processing) 23:30:23.109
cci: NCI: WLAN Coinst asking for write lock. 23:30:23.109
cci: NCI: WLAN Coinst acquired write lock. 23:30:23.109
cci: NCI: Init Notify Object for ms_msclient
cci: NCI: Init Notify Object for ms_msclient complete
cci: NCI: Init Notify Object for ms_tcpip
cci: NCI: Init Notify Object for ms_tcpip complete
cci: NCI: Init Notify Object for ms_tcpip6
cci: NCI: Init Notify Object for ms_tcpip6 complete
cci:
dvi: {Build Driver List} 23:30:23.140
dvi: Searching for hardware ID(s):
dvi: ms_vwifi
cpy: Policy is set to make all digital signatures equal.
dvi: Enumerating INFs from path list 'X:\WINDOWS\inf'
! inf: Detected INFCACHE inconsistency
! inf: Attempting INFCACHE repair 23:30:23.140
! inf: Verify/Fix on INFCACHE complete, status(4) - Fixed 23:30:23.390
inf: Searched 0 potential matches in published INF directory
dvi: Created Driver Node:
dvi: HardwareID - ms_vwifi
dvi: InfName - X:\WINDOWS\inf\netvwififlt.inf
dvi: DevDesc - Virtual WiFi Filter Driver
dvi: DrvDesc - Virtual WiFi Filter Driver
dvi: Provider - Microsoft
dvi: Mfg - Microsoft
dvi: ModelsSec - MSFT.NTx86
dvi: InstallSec - Install
dvi: ActualSec - Install
dvi: Rank - 0xf0ff0000
dvi: Signer -
dvi: Signer Score - Not digitally signed
dvi: DrvDate - 06/21/2006
dvi: Version - 6.1.7600.16385
inf: Searched 25 INFs in directory: 'X:\WINDOWS\inf'
dvi: {Build Driver List - exit(0x00000000)} 23:30:23.453
dvi: {Select Best Driver}
dvi: Selected driver installs from section in 'x:\windows\inf\netvwififlt.inf'.
dvi: Class GUID of device remains: {4d36e974-e325-11ce-bfc1-08002be10318}.
dvi: Set selected driver complete.
dvi: Selected:
dvi: Description -
dvi: InfFile -
dvi: Section -
dvi: Signer - []
dvi: Rank -
dvi: {Select Best Driver - exit(0x00000000)}
inf: Opened INF: 'x:\windows\inf\netvwififlt.inf' ()
inf: Opened INF: 'x:\windows\inf\netvwififlt.inf' ()
cci: NCI: This is a fresh install.
inf: Copyfiles=ndislwf.copyfiles.sys(netvwififlt.inf line 32)
! inf: Empty Section!
dvi: {_SCAN_FILE_QUEUE}
flq: ScanQ flags=22
flq: SPQ_SCAN_FILE_VALIDITY
flq: SPQ_SCAN_PRUNE_COPY_QUEUE
flq: ScanQ number of copy nodes=0
flq: ScanQ action=2 DoPruning=32
flq: ScanQ end Validity flags=22 CopyNodes=0
dvi: {_SCAN_FILE_QUEUE exit(0, 0x00000000)}
inf: AddReg=Inst_Ndi(netvwififlt.inf line 29)
inf: {Install Inf Section }
inf: AddService=vwififlt,,vwififlt_Service_Inst(netvwififlt.inf line 66)
inf: ServiceType=1(netvwififlt.inf line 70)
inf: StartType=1(netvwififlt.inf line 71)
inf: ErrorControl=1(netvwififlt.inf line 72)
inf: ServiceBinary=X:\WINDOWS\system32\DRIVERS\vwififlt.sys(netvwififlt.inf line 73)
inf: DisplayName="Virtual WiFi Filter Driver"(netvwififlt.inf line 69)
inf: LoadOrderGroup=NDIS(netvwififlt.inf line 74)
inf: Description="Virtual WiFi Filter Driver"(netvwififlt.inf line 75)
dvi: Add Service: Created service 'vwififlt'.
inf: {Install Inf Section exit(0x00000000)}
cci:
cci:
cci:
cci:
cci:
cci:
cci:
cci:
cci: NCI: Number of components 10
cci: NCI: Number of stack entries 15
cci: NCI: Number of disabled bindpaths 0
cci: NCI: Number of components being referenced 8
cci: NCI: cbBuf - 1000, cbBufIn - 1000
cci:
cci:
cci: NCI:
cci: NCI: Writing Network Linkage information for USB\VID_0BDA&PID_8187\380A0AA13C23
cci: NCI: UpperBind:
cci: NCI: Tcpip6
cci: NCI: Tcpip
cci: NCI: Export:
cci: NCI: \Device\{207504ED-00BC-4825-9873-44356EAFAB6B}
cci:
cci: NCI: Calling NdisHandlePnPEvent with
cci: NCI: {207504ED-00BC-4825-9873-44356EAFAB6B} Tcpip6
cci: NCI: NdisHandlePnPEvent result 0x00000000
cci:
cci:
cci:
cci:
cci: Reboot = 0
cci:
cci:
cci:
cci:
cci:
cci: NCI: Starting the following services:
cci: NCI: vwififlt
cci:
cci:
! cci: !NCI: Op=ATTACH, Layer=NDIS, Upper={5CBF81BF-5055-47CD-9055-A76B2B4E3698} Lower=\Device\{207504ED-00BC-4825-9873-44356EAFAB6B}, Error=00000002
cci: . Reboot 0
cci:
cci:
cci: NCI: WLAN Coinst Released write lock. 23:30:23.484
cci:
dvi: CoInstaller 2: Exit (Post Processing)
dvi: CoInstaller 1: Enter (Post Processing) 23:30:23.484
cci:
cci: NdisCoinst: IfType 71, NetLuidIndex 0, IfDescr Realtek RTL8187 Wireless 802.11b/g 54Mbps USB 2.0 Network Adapter
cci:
cci:
cci: NdisCoinst: Succefully set the BootFlags
cci:
dvi: CoInstaller 1: Exit (Post Processing)
dvi: {DIF_INSTALLDEVICE - exit(0x00000000)} 23:30:23.500
dvi: {DIF_NEWDEVICEWIZARD_FINISHINSTALL} 23:30:23.500
dvi: CoInstaller 1: Enter 23:30:23.500
dvi: CoInstaller 1: Exit
dvi: CoInstaller 2: Enter 23:30:23.500
dvi: CoInstaller 2: Exit
dvi: CoInstaller 3: Enter 23:30:23.500
dvi: CoInstaller 3: Exit
dvi: Class installer: Enter 23:30:23.500
dvi: Class installer: Exit
dvi: {DIF_NEWDEVICEWIZARD_FINISHINSTALL - exit(0x00000000)} 23:30:23.500
ndv: Device install status=0x00000000
ndv: Performing device install final cleanup...
ndv: {Core Device Install - exit(0x00000000)} 23:30:23.500
dvi: {DIF_DESTROYPRIVATEDATA} 23:30:23.500
dvi: CoInstaller 1: Enter 23:30:23.500
dvi: CoInstaller 1: Exit
dvi: CoInstaller 2: Enter 23:30:23.500
dvi: CoInstaller 2: Exit
dvi: CoInstaller 3: Enter 23:30:23.500
dvi: CoInstaller 3: Exit
dvi: Class installer: Enter 23:30:23.500
dvi: Class installer: Exit
dvi: {DIF_DESTROYPRIVATEDATA - exit(0x00000000)} 23:30:23.500
ump: Server install process exited with code 0x00000000 23:30:23.500
ump: {Plug and Play Service: Device Install exit(00000000)}
dvi: {Build Driver List} 23:30:23.500
! dvi: Driver list already built
dvi: {Build Driver List - exit(0x00000000)} 23:30:23.500
dvi: {DIF_SELECTBESTCOMPATDRV} 23:30:23.500
dvi: Using exported function 'NetClassInstaller' in module 'X:\WINDOWS\system32\NetCfgx.dll'.
dvi: Class installer == NetCfgx.dll,NetClassInstaller
dvi: Using exported function 'NciDeviceInstall' in module 'X:\WINDOWS\system32\nci.dll'.
dvi: CoInstaller 1 == nci.dll,NciDeviceInstall
dvi: Using exported function 'WlanDeviceClassCoInstaller' in module 'X:\WINDOWS\system32\wlaninst.dll'.
dvi: CoInstaller 2 == wlaninst.dll,WlanDeviceClassCoInstaller
dvi: Using exported function 'WwanDeviceClassCoInstaller' in module 'X:\WINDOWS\system32\wwaninst.dll'.
dvi: CoInstaller 3 == wwaninst.dll,WwanDeviceClassCoInstaller
dvi: CoInstaller 1: Enter 23:30:23.500
dvi: CoInstaller 1: Exit
dvi: CoInstaller 2: Enter 23:30:23.500
dvi: CoInstaller 2: Exit
dvi: CoInstaller 3: Enter 23:30:23.500
dvi: CoInstaller 3: Exit
dvi: Class installer: Enter 23:30:23.500
dvi: Class installer: Exit
dvi: Default installer: Enter 23:30:23.500
dvi: {Select Best Driver}
dvi: Selected driver installs from section in 'e:\win7x86\netrtuw.inf'.
dvi: Class GUID of device remains: {4d36e972-e325-11ce-bfc1-08002be10318}.
dvi: Set selected driver complete.
dvi: Selected:
dvi: Description -
dvi: InfFile -
dvi: Section -
dvi: Signer - []
dvi: Rank -
dvi: {Select Best Driver - exit(0x00000000)}
dvi: Default installer: Exit
dvi: {DIF_SELECTBESTCOMPATDRV - exit(0x00000000)} 23:30:23.500
dvi: {DIF_NEWDEVICEWIZARD_FINISHINSTALL} 23:30:23.500
dvi: CoInstaller 1: Enter 23:30:23.500
dvi: CoInstaller 1: Exit
dvi: CoInstaller 2: Enter 23:30:23.500
dvi: CoInstaller 2: Exit
dvi: CoInstaller 3: Enter 23:30:23.515
dvi: CoInstaller 3: Exit
dvi: Class installer: Enter 23:30:23.515
dvi: Class installer: Exit
dvi: {DIF_NEWDEVICEWIZARD_FINISHINSTALL - exit(0x00000000)} 23:30:23.515
dvi: {DIF_DESTROYPRIVATEDATA} 23:30:23.515
dvi: CoInstaller 1: Enter 23:30:23.515
dvi: CoInstaller 1: Exit
dvi: CoInstaller 2: Enter 23:30:23.515
dvi: CoInstaller 2: Exit
dvi: CoInstaller 3: Enter 23:30:23.515
dvi: CoInstaller 3: Exit
dvi: Class installer: Enter 23:30:23.531
dvi: Class installer: Exit
dvi: {DIF_DESTROYPRIVATEDATA - exit(0x00000000)} 23:30:23.531
<<<Section end 2012/07/17 23:30:23.531
<<<
>>>
>>>Section start 2012/07/17 23:32:03.187
cmd: "E:\WIN7驱动\PENetwork.exe"
dvi: Selected driver installs from section in 'x:\windows\inf\oem2.inf'.
dvi: Class GUID of device remains: {4d36e972-e325-11ce-bfc1-08002be10318}.
dvi: Set selected driver complete.
inf: {SetupCopyOEMInf: X:\WINDOWS\INF\oem2.inf} 23:32:03.203
inf: Driver Store location: X:\WINDOWS\System32\DriverStore\FileRepository\netrtuw.inf_x86_neutral_1116baaf4ebbe2a4\netrtuw.inf
inf: Published Inf Path: X:\WINDOWS\INF\oem2.inf
inf: Opened PNF: 'X:\WINDOWS\INF\oem2.inf' ()
inf: Installing catalog netrtuw.cat as: oem2.CAT
inf: OEM source media location: X:\WINDOWS\INF\
inf: {SetupCopyOEMInf exit (0x00000000)} 23:32:03.203
dvi: Searching for hardware ID(s):
dvi: usb\vid_0bda&pid_8187&rev_0100
dvi: usb\vid_0bda&pid_8187
dvi: Searching for compatible ID(s):
dvi: usb\class_00&subclass_00&prot_00
dvi: usb\class_00&subclass_00
dvi: usb\class_00
inf: Opened INF: 'X:\WINDOWS\System32\DriverStore\FileRepository\netrtuw.inf_x86_neutral_1116baaf4ebbe2a4\netrtuw.inf' ()
dvi: Selected driver installs from section in 'x:\windows\system32\driverstore\filerepository\netrtuw.inf_x86_neutral_1116baaf4ebbe2a4\netrtuw.inf'.
dvi: Class GUID of device remains: {4d36e972-e325-11ce-bfc1-08002be10318}.
dvi: Set selected driver complete.
dvi: {Plug and Play Service: Device Install for USB\VID_0BDA&PID_8187\380A0AA13C23}
ump: Creating Install Process: DrvInst.exe 23:32:03.203
ndv: Infpath=X:\WINDOWS\INF\oem2.inf
ndv: DriverNodeName=netrtuw.inf:Realtek.NTx86.6.1:RTL8187.ndi:6.1316.1209.2009:usb\vid_0bda&pid_8187&rev_0100
ndv: DriverStorepath=X:\WINDOWS\System32\DriverStore\FileRepository\netrtuw.inf_x86_neutral_1116baaf4ebbe2a4\netrtuw.inf
ndv: Building driver list from driver node strong name...
dvi: Searching for hardware ID(s):
dvi: usb\vid_0bda&pid_8187&rev_0100
dvi: usb\vid_0bda&pid_8187
dvi: Searching for compatible ID(s):
dvi: usb\class_00&subclass_00&prot_00
dvi: usb\class_00&subclass_00
dvi: usb\class_00
inf: Opened INF: 'X:\WINDOWS\System32\DriverStore\FileRepository\netrtuw.inf_x86_neutral_1116baaf4ebbe2a4\netrtuw.inf' ()
dvi: Selected driver installs from section in 'x:\windows\system32\driverstore\filerepository\netrtuw.inf_x86_neutral_1116baaf4ebbe2a4\netrtuw.inf'.
dvi: Class GUID of device remains: {4d36e972-e325-11ce-bfc1-08002be10318}.
dvi: Set selected driver complete.
ndv: {Core Device Install} 23:32:03.234
inf: Opened PNF: 'X:\WINDOWS\INF\oem2.inf' ()
dvi: {DIF_ALLOW_INSTALL} 23:32:03.265
dvi: Using exported function 'NetClassInstaller' in module 'X:\WINDOWS\system32\NetCfgx.dll'.
dvi: Class installer == NetCfgx.dll,NetClassInstaller
dvi: Using exported function 'NciDeviceInstall' in module 'X:\WINDOWS\system32\nci.dll'.
dvi: CoInstaller 1 == nci.dll,NciDeviceInstall
dvi: Using exported function 'WlanDeviceClassCoInstaller' in module 'X:\WINDOWS\system32\wlaninst.dll'.
dvi: CoInstaller 2 == wlaninst.dll,WlanDeviceClassCoInstaller
dvi: Using exported function 'WwanDeviceClassCoInstaller' in module 'X:\WINDOWS\system32\wwaninst.dll'.
dvi: CoInstaller 3 == wwaninst.dll,WwanDeviceClassCoInstaller
dvi: CoInstaller 1: Enter 23:32:03.265
dvi: CoInstaller 1: Exit
dvi: CoInstaller 2: Enter 23:32:03.265
dvi: CoInstaller 2: Exit
dvi: CoInstaller 3: Enter 23:32:03.265
dvi: CoInstaller 3: Exit
dvi: Class installer: Enter 23:32:03.265
下贴继续。。。。。。。。 接上帖：
inf: Opened PNF: 'X:\WINDOWS\INF\oem2.inf' ()
inf: AddReg=RTL8187.common.reg,RTLWLAN.reg,RTL8187_os61.reg(oem2.inf line 62)
dvi: Class installer: Exit
dvi: Default installer: Enter 23:32:03.281
dvi: Default installer: Exit
dvi: {DIF_ALLOW_INSTALL - exit(0xe000020e)} 23:32:03.281
ndv: Installing files...
dvi: {DIF_INSTALLDEVICEFILES} 23:32:03.281
dvi: CoInstaller 1: Enter 23:32:03.281
dvi: CoInstaller 1: Exit
dvi: CoInstaller 2: Enter 23:32:03.281
dvi: CoInstaller 2: Exit
dvi: CoInstaller 3: Enter 23:32:03.281
dvi: CoInstaller 3: Exit
dvi: Class installer: Enter 23:32:03.281
dvi: Class installer: Exit
dvi: Default installer: Enter 23:32:03.281
dvi: {Install FILES}
inf: Opened INF: 'x:\windows\system32\driverstore\filerepository\netrtuw.inf_x86_neutral_1116baaf4ebbe2a4\netrtuw.inf' ()
inf: {Install Inf Section }
inf: CopyFiles=RTL8187.CopyFiles(netrtuw.inf line 65)
cpy: Open PnpLockdownPolicy: Err=2. This is OK. Use LockDownPolicyDefault
flq: QueueSingleCopy...
flq: Inf : 'x:\windows\system32\driverstore\filerepository\netrtuw.inf_x86_neutral_1116baaf4ebbe2a4\netrtuw.inf'
flq: SourceInf: 'x:\windows\system32\driverstore\filerepository\netrtuw.inf_x86_neutral_1116baaf4ebbe2a4\netrtuw.inf'
flq: SourceSection:
flq: Source root path based on SourceInf
flq: SourceRootPath: 'X:\WINDOWS\System32\DriverStore\FileRepository\netrtuw.inf_x86_neutral_1116baaf4ebbe2a4'
flq: {FILE_QUEUE_COPY}
flq: CopyStyle - 0x00000400
flq: {FILE_QUEUE_COPY}
flq: CopyStyle - 0x00000400
flq: SourceRootPath - 'X:\WINDOWS\System32\DriverStore\FileRepository\netrtuw.inf_x86_neutral_1116baaf4ebbe2a4'
flq: SourceFilename - 'RTL8187.sys'
flq: TargetDirectory- 'X:\WINDOWS\system32\DRIVERS'
flq: TargetFilename - 'RTL8187.sys'
flq: SourceDesc - 'Realtek RTL8187 Wireless 802.11b/g 54Mbps USB 2.0 Network Adapter Driver Disk'
flq: {FILE_QUEUE_COPY exit(0x00000000)}
flq: {FILE_QUEUE_COPY exit(0x00000000)}
inf: {Install Inf Section exit (0x00000000)}
dvi: Processing co-installer registration section .
inf: {Install Inf Section }
inf: {Install Inf Section exit (0x00000000)}
dvi: Co-installers registered.
dvi: {Install INTERFACES}
dvi: Installing section
dvi: {Install INTERFACES exit 00000000}
dvi: {Install FILES exit (0x00000000)}
dvi: Default installer: Exit
dvi: {DIF_INSTALLDEVICEFILES - exit(0x00000000)} 23:32:03.296
ndv: Pruning file queue...
dvi: {_SCAN_FILE_QUEUE}
flq: ScanQ flags=620
flq: SPQ_SCAN_PRUNE_COPY_QUEUE
flq: SPQ_SCAN_FILE_COMPARISON
flq: SPQ_SCAN_ACTIVATE_DRP
flq: ScanQ number of copy nodes=1
flq: File 'X:\WINDOWS\system32\DRIVERS\RTL8187.sys' pruned from copy.
cpy: DrpSetRegFileProt 'X:\WINDOWS\system32\DRIVERS\RTL8187.sys' Status=0 Class=OEM Legacy
flq: ScanQ action=200 DoPruning=32
flq: ScanQ end Validity flags=620 CopyNodes=0
dvi: {_SCAN_FILE_QUEUE exit(0, 0x00000000)}
ndv: Committing file queue...
flq: {_commit_file_queue}
flq: CommitQ DelNodes=0 RenNodes=0 CopyNodes=0
flq: CommitQ early exit: No nodes are queued
flq: {_commit_file_queue exit OK}
ndv: Registering CoInstallers...
dvi: {DIF_REGISTER_COINSTALLERS} 23:32:03.312
dvi: CoInstaller 1: Enter 23:32:03.312
dvi: CoInstaller 1: Exit
dvi: CoInstaller 2: Enter 23:32:03.312
dvi: CoInstaller 2: Exit
dvi: CoInstaller 3: Enter 23:32:03.312
dvi: CoInstaller 3: Exit
dvi: Class installer: Enter 23:32:03.312
dvi: Class installer: Exit
dvi: Default installer: Enter 23:32:03.312
inf: Opened INF: 'x:\windows\system32\driverstore\filerepository\netrtuw.inf_x86_neutral_1116baaf4ebbe2a4\netrtuw.inf' ()
inf: {Install Inf Section }
inf: {Install Inf Section exit (0x00000000)}
dvi: {DIF_DESTROYPRIVATEDATA} 23:32:03.312
dvi: CoInstaller 1: Enter 23:32:03.312
dvi: CoInstaller 1: Exit
dvi: CoInstaller 2: Enter 23:32:03.312
dvi: CoInstaller 2: Exit
dvi: CoInstaller 3: Enter 23:32:03.312
dvi: CoInstaller 3: Exit
dvi: Class installer: Enter 23:32:03.312
dvi: Class installer: Exit
dvi: {DIF_DESTROYPRIVATEDATA - exit(0x00000000)} 23:32:03.312
dvi: Co-installers registered.
dvi: Default installer: Exit
dvi: {DIF_REGISTER_COINSTALLERS - exit(0x00000000)} 23:32:03.312
ndv: Installing interfaces...
dvi: {DIF_INSTALLINTERFACES} 23:32:03.312
dvi: Using exported function 'NciDeviceInstall' in module 'X:\WINDOWS\system32\nci.dll'.
dvi: CoInstaller 1 == nci.dll,NciDeviceInstall
dvi: Using exported function 'WlanDeviceClassCoInstaller' in module 'X:\WINDOWS\system32\wlaninst.dll'.
dvi: CoInstaller 2 == wlaninst.dll,WlanDeviceClassCoInstaller
dvi: Using exported function 'WwanDeviceClassCoInstaller' in module 'X:\WINDOWS\system32\wwaninst.dll'.
dvi: CoInstaller 3 == wwaninst.dll,WwanDeviceClassCoInstaller
dvi: CoInstaller 1: Enter 23:32:03.312
dvi: CoInstaller 1: Exit
dvi: CoInstaller 2: Enter 23:32:03.312
dvi: CoInstaller 2: Exit
dvi: CoInstaller 3: Enter 23:32:03.312
dvi: CoInstaller 3: Exit
dvi: Class installer: Enter 23:32:03.312
dvi: Class installer: Exit
dvi: Default installer: Enter 23:32:03.312
dvi: {Install INTERFACES}
inf: Opened INF: 'x:\windows\system32\driverstore\filerepository\netrtuw.inf_x86_neutral_1116baaf4ebbe2a4\netrtuw.inf' ()
dvi: Installing section
dvi: {Install INTERFACES exit 00000000}
dvi: Default installer: Exit
dvi: {DIF_INSTALLINTERFACES - exit(0x00000000)} 23:32:03.328
ndv: Installing device...
dvi: {DIF_INSTALLDEVICE} 23:32:03.328
dvi: CoInstaller 1: Enter 23:32:03.328
cci:
cci: NdisCoinst: Guid of the adapter exists and is {207504ED-00BC-4825-9873-44356EAFAB6B}
inf: Opened PNF: 'X:\WINDOWS\INF\oem2.inf' ()
cci: NdisCoinst: IfType from registry is 71
cci: NdisCoinst: IfType 71, Characteristics 0x84, IsIrdaDevice 0, PhysicalMediaType 9, MediaType 16, IsBridge 0, FoundGuidInDownlevel 0, EnableDhcp 2
cci: NdisCoinst: Connection name is 无线网络连接
cci: NdisCoinst: NetLuidIndex exists and is 0
cci:
dvi: CoInstaller 1: Exit
dvi: CoInstaller 2: Enter 23:32:03.328
inf: Opened PNF: 'X:\WINDOWS\INF\oem2.inf' ()
dvi: CoInstaller 2: Exit
dvi: CoInstaller 3: Enter 23:32:03.328
inf: Opened PNF: 'X:\WINDOWS\INF\oem2.inf' ()
dvi: CoInstaller 3: Exit
dvi: Class installer: Enter 23:32:03.328
cci:
inf: Opened PNF: 'X:\WINDOWS\INF\oem2.inf' ()
cci: NCI: NewDeviceInstall is 0. Assuming this is an update
inf: AddReg=RTL8187.common.reg,RTLWLAN.reg,RTL8187_os61.reg(oem2.inf line 62)
dvi: {Install DEVICE}
inf: Opened INF: 'x:\windows\system32\driverstore\filerepository\netrtuw.inf_x86_neutral_1116baaf4ebbe2a4\netrtuw.inf' ()
dvi: Processing Registry/Property directives...
inf: {Install Inf Section }
inf: AddReg=RTL8187.common.reg,RTLWLAN.reg,RTL8187_os61.reg(netrtuw.inf line 62)
inf: {Install Inf Section exit (0x00000000)}
inf: {Install Inf Section }
inf: AddReg=RTL8187_os61.vwifi.reg(netrtuw.inf line 74)
inf: {Install Inf Section exit (0x00000000)}
dvi: {Writing Device Properties}
dvi: Provider name=Realtek Semiconductor Corp.
dvi: DriverDate 12/09/2009
dvi: DriverVersion=6.1316.1209.2009
dvi: Class name=Net
dvi: Manufacturer=Realtek Semiconductor Corp.
dvi: Matching DeviceID=usb\vid_0bda&pid_8187&rev_0100
dvi: Strong Name=oem2.inf:Realtek.NTx86.6.1:RTL8187.ndi:6.1316.1209.2009:usb\vid_0bda&pid_8187&rev_0100
dvi: {Writing Device Properties - Complete}
inf: {Install Inf Section }
inf: AddService=RTL8187,2,RTL8187.nt61.Service,RTL8187.nt61.EventLog(netrtuw.inf line 71)
inf: ServiceType=1(netrtuw.inf line 86)
inf: StartType=3(netrtuw.inf line 87)
inf: ErrorControl=1(netrtuw.inf line 88)
inf: ServiceBinary=X:\WINDOWS\system32\DRIVERS\rtl8187.sys(netrtuw.inf line 89)
inf: DisplayName="Realtek RTL8187 Wireless 802.11b/g 54Mbps USB 2.0 Network Adapter"(netrtuw.inf line 85)
inf: LoadOrderGroup=NDIS(netrtuw.inf line 90)
dvi: Add Service: Modified existing service 'RTL8187'.
inf: AddReg=RTL8187.nt61.AddEventLog.reg(netrtuw.inf line 93)
inf: {Install Inf Section exit(0x00000000)}
dvi: Updated reflected section names for: oem2.inf
dvi: {Install DEVICE exit (0x00000000)}
dvi: Writing common driver property settings.
dvi: DriverDescription=Realtek RTL8187 Wireless 802.11b/g 54Mbps USB 2.0 Network Adapter
dvi: DeviceDisplayName=Realtek RTL8187 Wireless 802.11b/g 54Mbps USB 2.0 Network Adapter
dvi: Install Device: Restarting device. 23:32:03.359
dvi: Install Device: Restarting device completed. 23:32:03.359
!!!dvi: Device not started: Device has problem: 0x13: CM_PROB_REGISTRY.
cci:
cci: NCI: INetCfg Installer Interface asking for write lock. 23:32:03.359
cci: NCI: INetCfg Installer Interface acquired write lock. 23:32:03.359
cci: NCI: Init Notify Object for ms_msclient
cci: NCI: Init Notify Object for ms_msclient complete
cci: NCI: Init Notify Object for ms_tcpip
cci: NCI: Init Notify Object for ms_tcpip complete
cci: NCI: Init Notify Object for ms_tcpip6
cci: NCI: Init Notify Object for ms_tcpip6 complete
cci:
cci:
cci:
cci: NCI: Number of components 12
cci: NCI: Number of stack entries 18
cci: NCI: Number of disabled bindpaths 0
cci: NCI: Number of components being referenced 10
cci: NCI: cbBuf - 1160, cbBufIn - 1160
cci:
cci:
cci:
cci:
cci:
cci:
cci: Reboot = 0
cci:
cci:
cci:
cci:
cci:
cci:
cci:
cci: . Reboot 0
cci:
cci:
cci: NCI: INetCfg Installer Interface Released write lock. 23:32:03.406
cci:
cci:
cci:
dvi: Class installer: Exit
dvi: CoInstaller 2: Enter (Post Processing) 23:32:03.406
cci: NCI: WLAN Coinst asking for write lock. 23:32:03.406
cci: NCI: WLAN Coinst acquired write lock. 23:32:03.406
cci: NCI: WLAN Coinst Released write lock. 23:32:03.406
cci:
dvi: CoInstaller 2: Exit (Post Processing)
dvi: CoInstaller 1: Enter (Post Processing) 23:32:03.406
cci:
cci: NdisCoinst: IfType 71, NetLuidIndex 0, IfDescr Realtek RTL8187 Wireless 802.11b/g 54Mbps USB 2.0 Network Adapter
cci:
cci:
cci: NdisCoinst: Succefully set the BootFlags
cci:
dvi: CoInstaller 1: Exit (Post Processing)
dvi: {DIF_INSTALLDEVICE - exit(0x00000000)} 23:32:03.406
dvi: {DIF_NEWDEVICEWIZARD_FINISHINSTALL} 23:32:03.406
dvi: CoInstaller 1: Enter 23:32:03.406
dvi: CoInstaller 1: Exit
dvi: CoInstaller 2: Enter 23:32:03.406
dvi: CoInstaller 2: Exit
dvi: CoInstaller 3: Enter 23:32:03.406
dvi: CoInstaller 3: Exit
dvi: Class installer: Enter 23:32:03.406
dvi: Class installer: Exit
dvi: {DIF_NEWDEVICEWIZARD_FINISHINSTALL - exit(0x00000000)} 23:32:03.406
ndv: Device install status=0x00000000
ndv: Performing device install final cleanup...
! ndv: Queueing up error report since device has a PnP problem...
ndv: {Core Device Install - exit(0x00000000)} 23:32:03.406
dvi: {DIF_DESTROYPRIVATEDATA} 23:32:03.406
dvi: CoInstaller 1: Enter 23:32:03.406
dvi: CoInstaller 1: Exit
dvi: CoInstaller 2: Enter 23:32:03.406
dvi: CoInstaller 2: Exit
dvi: CoInstaller 3: Enter 23:32:03.406
dvi: CoInstaller 3: Exit
dvi: Class installer: Enter 23:32:03.406
dvi: Class installer: Exit
dvi: {DIF_DESTROYPRIVATEDATA - exit(0x00000000)} 23:32:03.406
ump: Server install process exited with code 0x00000000 23:32:03.406
ump: {Plug and Play Service: Device Install exit(00000000)}
dvi: {Build Driver List} 23:32:03.406
! dvi: Driver list already built
dvi: {Build Driver List - exit(0x00000000)} 23:32:03.406
dvi: {DIF_SELECTBESTCOMPATDRV} 23:32:03.406
dvi: Using exported function 'NetClassInstaller' in module 'X:\WINDOWS\system32\NetCfgx.dll'.
dvi: Class installer == NetCfgx.dll,NetClassInstaller
dvi: Using exported function 'NciDeviceInstall' in module 'X:\WINDOWS\system32\nci.dll'.
dvi: CoInstaller 1 == nci.dll,NciDeviceInstall
dvi: Using exported function 'WlanDeviceClassCoInstaller' in module 'X:\WINDOWS\system32\wlaninst.dll'.
dvi: CoInstaller 2 == wlaninst.dll,WlanDeviceClassCoInstaller
dvi: Using exported function 'WwanDeviceClassCoInstaller' in module 'X:\WINDOWS\system32\wwaninst.dll'.
dvi: CoInstaller 3 == wwaninst.dll,WwanDeviceClassCoInstaller
dvi: CoInstaller 1: Enter 23:32:03.421
dvi: CoInstaller 1: Exit
dvi: CoInstaller 2: Enter 23:32:03.421
dvi: CoInstaller 2: Exit
dvi: CoInstaller 3: Enter 23:32:03.421
dvi: CoInstaller 3: Exit
dvi: Class installer: Enter 23:32:03.421
dvi: Class installer: Exit
dvi: Default installer: Enter 23:32:03.421
dvi: {Select Best Driver}
dvi: Selected driver installs from section in 'x:\windows\inf\oem2.inf'.
dvi: Class GUID of device remains: {4d36e972-e325-11ce-bfc1-08002be10318}.
dvi: Set selected driver complete.
dvi: Selected:
dvi: Description -
dvi: InfFile -
dvi: Section -
dvi: Signer - []
dvi: Rank -
dvi: {Select Best Driver - exit(0x00000000)}
dvi: Default installer: Exit
dvi: {DIF_SELECTBESTCOMPATDRV - exit(0x00000000)} 23:32:03.421
dvi: {DIF_NEWDEVICEWIZARD_FINISHINSTALL} 23:32:03.421
dvi: CoInstaller 1: Enter 23:32:03.421
dvi: CoInstaller 1: Exit
dvi: CoInstaller 2: Enter 23:32:03.421
dvi: CoInstaller 2: Exit
dvi: CoInstaller 3: Enter 23:32:03.421
dvi: CoInstaller 3: Exit
dvi: Class installer: Enter 23:32:03.421
dvi: Class installer: Exit
dvi: {DIF_NEWDEVICEWIZARD_FINISHINSTALL - exit(0x00000000)} 23:32:03.421
<<<Section end 2012/07/17 23:32:03.421
<<<
下贴继续。。。。。。。 以下是 Netrtuw.inf (For Win 7) 的内容：
;; Netrtuw.inf (For Win 7)
;;
;; Realtek RTL8187 Wireless 802.11g 54Mbps USB 2.0 Network Adapter
;;
;; Copyright (C) 2009 Realtek Semiconductor Corp.
;;
;; this release is primarily for WHQL test.
;;
Signature = "$Windows NT$"
Class = Net
ClassGUID = {4d36e972-e325-11ce-bfc1-08002be10318}
Provider = %Realtek%
CatalogFile.NT = netrtuw.cat ;; for WHQL certified
DriverVer = 12/09/2009,6.1316.1209.2009
%Realtek% = Realtek,NTx86.6.1
ExcludeFromSelect = USB\VID_0BDA&PID_8187&REV_0100
;;****************************************************************************
;; IDs for X86
;;****************************************************************************
%RTL8187.DeviceDesc% = RTL8187.ndi, USB\VID_0BDA&PID_8187&REV_0100
%RTL8187.DeviceDesc% = RTL8187.ndi, USB\VID_13D1&PID_ABE6&REV_0100
%RTL8187.DeviceDesc% = RTL8187.ndi, USB\VID_1371&PID_9401&REV_0100
%RTL8187.DeviceDesc% = RTL8187.ndi, USB\VID_114B&PID_0150&REV_0100
%RTL8187.DeviceDesc% = RTL8187.ndi, USB\VID_18E8&PID_6232&REV_0100
%RTL8187.DeviceDesc% = RTL8187.ndi, USB\VID_0789&PID_010C&REV_0100
%RTL8187.DeviceDesc% = RTL8187.ndi, USB\VID_7392&PID_7612&REV_0100
%RTL8187.DeviceDesc% = RTL8187.ndi, USB\VID_145F&PID_0161&REV_0100
%RTL8187.DeviceDesc% = RTL8187.ndi, USB\VID_1B75&PID_8187&REV_0100
%RTL8187.DeviceDesc.Surecom% = RTL8187.ndi,USB\VID_0769&PID_11F2&REV_0100
%RTL8187.DeviceDesc.Sitecom% = RTL8187.ndi,USB\VID_0DF6&PID_000D&REV_0100
;;****************************************************************************
;; IDs for X64
;;****************************************************************************
%RTL8187.DeviceDesc% = RTL8187.ndi, USB\VID_0BDA&PID_8187&REV_0100
%RTL8187.DeviceDesc% = RTL8187.ndi, USB\VID_13D1&PID_ABE6&REV_0100
%RTL8187.DeviceDesc% = RTL8187.ndi, USB\VID_1371&PID_9401&REV_0100
%RTL8187.DeviceDesc% = RTL8187.ndi, USB\VID_114B&PID_0150&REV_0100
%RTL8187.DeviceDesc% = RTL8187.ndi, USB\VID_18E8&PID_6232&REV_0100
%RTL8187.DeviceDesc% = RTL8187.ndi, USB\VID_0789&PID_010C&REV_0100
%RTL8187.DeviceDesc% = RTL8187.ndi, USB\VID_7392&PID_7612&REV_0100
%RTL8187.DeviceDesc% = RTL8187.ndi, USB\VID_145F&PID_0161&REV_0100
%RTL8187.DeviceDesc% = RTL8187.ndi, USB\VID_1B75&PID_8187&REV_0100
%RTL8187.DeviceDesc.Surecom% = RTL8187.ndi,USB\VID_0769&PID_11F2&REV_0100
%RTL8187.DeviceDesc.Sitecom% = RTL8187.ndi,USB\VID_0DF6&PID_000D&REV_0100
;;****************************************************************************
;; Windows 2000/XP
;;****************************************************************************
AddReg = RTL8187.common.reg, RTLWLAN.reg, RTL8187_os61.reg
Characteristics = 0x84
BusType = 15
CopyFiles = RTL8187.CopyFiles
*IfType = 71 ; IF_TYPE_IEEE80211
*MediaType = 16 ; NdisMediumNative802_11
*PhysicalMediaType = 9 ; NdisPhysicalMediumNative802_11
AddService = RTL8187, 2, RTL8187.nt61.Service, RTL8187.nt61.EventLog
AddReg = RTL8187_os61.vwifi.reg
;;****************************************************************************
;; register for both Win 7 x86 and x64 **
;;****************************************************************************
HKR, Ndi, Service, 0, "RTL8187"
HKR, Ndi\Interfaces, UpperRange, 0, "ndis5,mdcwifi,wifipro"
HKR, Ndi\Interfaces, LowerRange, 0, "wlan, ethernet,vwifi"
DisplayName = %RTL8187.DeviceDesc.DispName%
ServiceType = 1 ; SERVICE_KERNEL_DRIVER
StartType = 3 ; SERVICE_DEMAND_START
ErrorControl = 1 ; SERVICE_ERROR_NORMAL
ServiceBinary= %12%\rtl8187.sys
LoadOrderGroup = NDIS
AddReg = RTL8187.nt61.AddEventLog.reg
HKR, , EventMessageFile, 0x00020000, "%%SystemRoot%%\System32\netevent.dll"
HKR, , TypesSupported, 0x00010001, 7
;; Adds the VWiFi PNP filter
HKR,,"UpperFilters",0x00010000,"vwifibus"
;*******************************************************************************
; RTL8187 common paramters
;*******************************************************************************
HKR,Ndi\params\LedCtrl, ParamDesc,0, %LED_CONTROL_STR%
HKR,Ndi\params\LedCtrl, type, 0, "enum"
HKR,Ndi\params\LedCtrl, default, 0, "1"
HKR,Ndi\params\LedCtrl\enum, "0", 0, %Disable_STR%
HKR,Ndi\params\LedCtrl\enum, "1", 0, %ENABLE_STR%
HKR,defaults,LedCtrl,0,"1"
HKR,,LedCtrl,0,"1"
HKR,NDI\params\PowerSaveMode, ParamDesc,0, %POWER_SAVE_STR%
HKR,NDI\params\PowerSaveMode, type, 0, "enum"
HKR,Ndi\params\PowerSaveMode, default, 0, "0"
HKR,NDI\params\PowerSaveMode\enum, "0", 0, %CAM_STR%
HKR,NDI\params\PowerSaveMode\enum, "1", 0, %MAX_PSP_STR%
HKR,NDI\params\PowerSaveMode\enum, "2", 0, %FAST_PSP_STR%
HKR,defaults,PowerSaveMode,0,"0"
HKR,,PowerSaveMode,0,"0"
HKR,Ndi\params\WiFi11bIbss, ParamDesc,0, %WIFI_IBSS_STR%
HKR,Ndi\params\WiFi11bIbss, type, 0, "enum"
HKR,Ndi\params\WiFi11bIbss, default, 0, "0"
HKR,Ndi\params\WiFi11bIbss\enum, "0", 0, %DISABLE_STR%
HKR,Ndi\params\WiFi11bIbss\enum, "1", 0, %ENABLE_STR%
HKR,defaults,WiFi11bIbss,0,"0"
HKR,,WiFi11bIbss,0,"0"
HKR,Ndi\params\bRateAdaptive, ParamDesc,0, %RATE_ADAPTIVE_STR%
HKR,Ndi\params\bRateAdaptive, type, 0, "enum"
HKR,Ndi\params\bRateAdaptive, default, 0, "1"
HKR,Ndi\params\bRateAdaptive\enum, "0", 0, %DISABLE_STR%
HKR,Ndi\params\bRateAdaptive\enum, "1", 0, %ENABLE_STR%
HKR,defaults,bRateAdaptive,0,"1"
HKR,,bRateAdaptive,0,"1"
; IC specific
HKR,,QoS,0,"0"
HKR,,CcxRm,0,"0"
;;----------------------------------------------------------------------------
;; Realtek WLAN NIC parameters
;;----------------------------------------------------------------------------
HKR,,SSID,0,""
HKR,Ndi\params\Channel, ParamDesc,0, %CHANNEL_STR%
HKR,Ndi\params\Channel, type, 0, "int"
HKR,Ndi\params\Channel, default, 0, "1"
HKR,Ndi\params\Channel, Min, 0, "1"
HKR,Ndi\params\Channel, Max, 0, "14"
HKR,Ndi\params\Channel, Step, 0, "1"
HKR,Ndi\params\Channel, Base, 0, "10"
HKR,defaults,Channel,0,"1"
HKR,,Channel,0,"1"
HKR,Ndi\params\NetworkType, ParamDesc,0, %NETWORK_TYPE_STR%
HKR,Ndi\params\NetworkType, type, 0, "enum"
HKR,Ndi\params\NetworkType, default, 0, "1"
HKR,Ndi\params\NetworkType\enum, "0", 0, %AD_HOC_STR%
HKR,Ndi\params\NetworkType\enum, "1", 0, %INFRA_STR%
HKR,Ndi\params\NetworkType\enum, "2", 0, %AUTO_SELECT_STR%
HKR,defaults,NetworkType,0,"1"
HKR,,NetworkType,0,"1"
HKR,Ndi\params\ChannelPlan, ParamDesc, 0, %CHANNEL_PLAN_STR%
HKR,Ndi\params\ChannelPlan, type, 0, "enum"
HKR,Ndi\params\ChannelPlan, default, 0, "15"
HKR,Ndi\params\ChannelPlan\enum, "0", 0, "FCC"
HKR,Ndi\params\ChannelPlan\enum, "1", 0, "IC"
HKR,Ndi\params\ChannelPlan\enum, "2", 0, "ETSI"
HKR,Ndi\params\ChannelPlan\enum, "3", 0, "Spain"
HKR,Ndi\params\ChannelPlan\enum, "4", 0, "France"
HKR,Ndi\params\ChannelPlan\enum, "5", 0, "MKK"
HKR,Ndi\params\ChannelPlan\enum, "6", 0, "MKK1"
HKR,Ndi\params\ChannelPlan\enum, "7", 0, "Israel"
HKR,Ndi\params\ChannelPlan\enum, "8", 0, "TELEC"
HKR,Ndi\params\ChannelPlan\enum, "15", 0, "DOMAIN_FROM_EEPROM"
HKR,defaults,ChannelPlan, 0, "15"
HKR,,ChannelPlan, 0, "15"
; Wireless Mode, 2006.11.30, by shien chang.
HKR,Ndi\params\WirelessMode, ParamDesc, 0, %WL_MODE_STR%
HKR,Ndi\params\WirelessMode, type, 0, "enum"
HKR,Ndi\params\WirelessMode, default, 0, "8"
;HKR,Ndi\params\WirelessMode\enum, "1", 0, "IEEE 802.11a"
HKR,Ndi\params\WirelessMode\enum, "2", 0, "IEEE 802.11b"
HKR,Ndi\params\WirelessMode\enum, "4", 0, "IEEE 802.11b/g"
;HKR,Ndi\params\WirelessMode\enum, "8", 0, "Auto"
HKR,defaults,WirelessMode, 0, "4"
HKR,,WirelessMode, 0, "4"
; For PSP XLink mode, 2006.09.04, by shien chang.
;HKR,Ndi\params\PSPXlinkMode, ParamDesc,0, %PSP_XLINK_STR%
;HKR,Ndi\params\PSPXlinkMode, type, 0, "enum"
;HKR,Ndi\params\PSPXlinkMode, default, 0, "0"
;HKR,Ndi\params\PSPXlinkMode\enum, "0", 0, "Disable"
;HKR,Ndi\params\PSPXlinkMode\enum, "1", 0, "Enable"
;HKR,defaults,PSPXlinkMode,0,"0"
;HKR,,PSPXlinkMode,0,"0"
; Preamble mode, 2006.11.30, by shien chang.
HKR,Ndi\params\PreambleMode, ParamDesc, 0, %PREAMBLE_MODE_STR%
HKR,Ndi\params\PreambleMode, type, 0, "enum"
HKR,Ndi\params\PreambleMode, default, 0, "2"
HKR,Ndi\params\PreambleMode\enum, "1", 0, "Long Preamble"
HKR,Ndi\params\PreambleMode\enum, "2", 0, "Auto"
HKR,Ndi\params\PreambleMode\enum, "3", 0, "Short Preamble"
HKR,defaults,PreambleMode, 0, "2"
HKR,,PreambleMode, 0, "2"
HKR,,DefaultKeyID,,"0"
HKR,,DefaultKey0,,""
HKR,,DefaultKey1,,""
HKR,,DefaultKey2,,""
HKR,,DefaultKey3,,""
;*******************************************************************************
; Destination Directory
;*******************************************************************************
RTL8187.sys,,,2
DefaultDestDir = 11
RTL8187.CopyFiles = 12
;;****************************************************************************
;; Source Files
;;****************************************************************************
RTL8187.sys = 1
1=%DISKNAME%,,,
;*******************************************************************************
; Strings
;*******************************************************************************
Realtek = "Realtek Semiconductor Corp."
SSID_STR = "SSID"
CHANNEL_STR = "Channel"
NETWORK_TYPE_STR = "Network Type"
LED_CONTROL_STR = "LED Control"
POWER_SAVE_STR = "Power Save Mode"
WIFI_IBSS_STR = "IBSS Default 11b Mode"
RATE_ADAPTIVE_STR = "Rate Adaptive"
QOS_STR = "QoS"
TransmitBuffers = "Transmit Buffers"
ReceiveBuffers = "Receive Buffers"
FORCE_PRIORITY_STR = "Forced Priority"
HW_PARA_STR = "Init from HwParaFile"
THREE_WIRE_MODE_STR = "Three Wire Programming Mode"
BOARD_TYPE_STR = "Board Type"
PROTECTION_MODE_STR = "Protection Mode"
TPC_STR = "Transmit Power Control"
TPC_POLARITY_STR = "TPC Polarity Select"
HIGH_POWER_STR = "High Power Mechanism"
INIT_GAIN_STR = "Initial Gain State"
CW_MAX_MIN_STR = "Contention Window"
PSP_XLINK_STR = "PSP XLink Mode"
ANTENNA_DIVERSITY_STR = "SW Antenna Diversity"
INACTIVE_POWER_SAVE = "Inactive Power Save"
B_MODE_INIT_GAIN_STR = "B Mode Initial Gain"
WL_MODE_STR = "Wireless Mode"
PREAMBLE_MODE_STR = "Preamble Mode"
FRAGTHRESH_STR = "Fragmentation Threshold"
RTSTHRESH_STR = "RTS Threshold"
DOT11_ENABLE_STR = "802.11d"
CHANNEL_PLAN_STR = "Channel Plan"
CAM_STR ="CAM"
MAX_PSP_STR ="MAX_PSP"
FAST_PSP_STR ="Fast_PSP"
DISABLE_STR ="Disable"
ENABLE_STR ="Enable"
AD_HOC_STR ="Ad Hoc"
INFRA_STR ="Infrastructure"
AUTO_SELECT_STR ="Auto select"
11A_STR ="IEEE 802.11 a"
11B_STR ="IEEE 802.11 b"
11BG_STR ="IEEE 802.11 b/g"
LONG_PREAMBLE_STR ="Long Preamble"
SHORT_PREAMBLE_STR ="Short Preamble"
AUTO_STR ="Auto"
;; Source disk name
DISKNAME = "Realtek RTL8187 Wireless 802.11b/g 54Mbps USB 2.0 Network Adapter Driver Disk"
RTL8187.DeviceDesc = "Realtek RTL8187 Wireless 802.11b/g 54Mbps USB 2.0 Network Adapter"
RTL8187.DeviceDesc.DispName = "Realtek RTL8187 Wireless 802.11b/g 54Mbps USB 2.0 Network Adapter"
RTL8187.DeviceDesc.Surecom = "SURECOM EP-9001-g 802.11g 54M WLAN USB Adapter"
RTL8187.DeviceDesc.Sitecom = "SITECOM WL-168 Wireless Network USB Adapter 54g"
实在不好意思，太长了，楼主注意休息呵。 N年之后回来，终于等到有win7pe的骨头版了，真是非常感谢啊 原帖由 hlstudio 于 2012-7-17 20:57 发表 http://bbs.wuyou.net/images/common/back.gif
在config/software注册表
classes/doc
classes/OfficeWord
然后在regdoc.cmd中这么引用的
REG ADD HKCR\OfficeWord\shell\open\command /ve /t REG_SZ /d "\"%TP%\文本图像\OFFICE\WORD.EXE\" "\"%%1\" / ...
谢谢，已解决。举一反三，系统已关联图片、doc、xls、gho、iso及压缩文件包。
回复 #763 zyk02 的帖子
辛苦了，这么晚还在测试。从楼上日志来看，驱动基本装上了。
无线网络启用过程：
如上图，选择 WIFI 页签，点击开始，启动WIFI后，有无线网络时页面如下图：
依据你需要手工安装驱动的情况来看，可以先启用网络，再手工安装驱动，再如上启用WIFI。
请进一步在启用WIFI后测试确认：
①网卡列表中有无 RELTEK无线网卡
②SSID列表中能搜索到无线网络吗？
③如果搜索到无线网卡，则选中一个网络，双击即可（有的要输入密码）连接。
BTW：我的SSID清单是空的，因为我这个网卡有点问题，正常情况下，这个清单应该有10个8个的无线网络
[ 本帖最后由 hlstudio 于 2012-7-18 09:39 编辑 ] 都说骨头的好，我也要下载来看看到底怎样 按照楼主的方法，不好意思，还是出不来。可能原因如下：
1. 可能是外插 USB 无线网卡的缘故，但网卡是好的。
2. 试过在 XPSp3 和其它 win7pe 中，装完驱动还要重启。但pe 是map ×.iso启动，重启无效。
骨头win7pe是其它win7pe中启动最快的，还将继续使用下去。多谢楼主指导，让我们学到了不少知识。
回复 #768 zyk02 的帖子
是啊，可能和外插USB有关，没有环境有些不好调试。前面有一例说某款一体机不能识别u盘的，也没有定位到。 继续关注，继续学习。。。。。。。。
请教H大
原帖由 一望无垠 于 2012-7-18 09:31 发表 http://bbs.wuyou.net/images/common/back.gif谢谢，已解决。举一反三，系统已关联图片、doc、xls、gho、iso及压缩文件包。
再请教，我在其它XPPE系统中顺利实现了上述关联。但在 其它win7pe中按此方法，却不能实现文件关联，另，我虽然能把UD区petools 目录读取到x:\盘，但参照大大的win7pe，却不能在 程序\petools 上显示，其它03pe也如此，只好在桌面建立了文件夹快捷方式。再请指点！
回复 #771 一望无垠 的帖子
①WIN7PE中文件关联应该是一样的，注册表同样修改，外置是共用的。②看有x:\PETOOLS目录吗？能正确识别到别的硬盘根目录上PETOOLS吗？
如果上述都没有问题，注意看WIN7PE内核中pecmd.ini最后一行，读取UD区和加载PETOOLS这两个命令应该组合成串行执行。 原帖由 hlstudio 于 2012-7-20 14:38 发表 http://bbs.wuyou.net/images/common/back.gif
①WIN7PE中文件关联应该是一样的，注册表同样修改，外置是共用的。
②看有x:\PETOOLS目录吗？能正确识别到别的硬盘根目录上PETOOLS吗？
如果上述都没有问题，注意看WIN7PE内核中pecmd.ini最后一行，读取UD区 ...
改装w03pe 成功实现文件关联 和 开始菜单 petools
但其它win7pe 还是不能 文件关联 和 显示 程序\petools ，查x盘 有petools目录和文件；启动pe后运行regedit 查注册表项 也有添加的相关内容。不知道如何做了。 w03pe不管，此精简版链接显示 “程序\xx盘petools ”肯定没问题的。
目前的精简版，就缺diskpart组件，或者找一个能代替的工具也行。主要想vhd的创建及挂载分配盘符。
回复 #774 zhaohj 的帖子
你这工具太多了啊，还不少是wim的。已经有了imdisk了，还要搞vhd啊？好像在坛子里见过说先预置好已格式化的vhd，再直接挂载，这样是不是就省diskpart了。 原帖由 zhaohj 于 2012-7-20 16:56 发表 http://bbs.wuyou.net/images/common/back.gif
w03pe不管，此精简版链接显示 “程序\xx盘petools ”肯定没问题的。
目前的精简版，就缺diskpart组件，或者找一个能代替的工具也行。主要想vhd的创建及挂载分配盘符。
是啊，骨头版的win7pe 可以实现 程序\petools,也能上网，关联相关文件，真不错，收藏做合盘用了；改装其它w03pe和xppe 也成功实现了此功能。目前照此方法修改饭大的native win7pe不成功，不能关联文件和显示 程序\petools ，我只好在桌面建 petools 文件夹快捷方式了。 原帖由 hlstudio 于 2012-7-20 17:07 发表 http://bbs.wuyou.net/images/common/back.gif
你这工具太多了啊，还不少是wim的。
已经有了imdisk了，还要搞vhd啊？好像在坛子里见过说先预置好已格式化的vhd，再直接挂载，这样是不是就省diskpart了。
嵌入式的fbwf对imdisk虚拟的盘无法挂载。
先预置好已格式化的vhd，再直接挂载，有什么工具？
我测试了几个都不太好。
回复 #770 zyk02 的帖子
从同事那借了一个USB无线网卡TL-WN620G，没找到WIN7的驱动，从驱动之家下载了一个vista的驱动。先启用网络，然后用pecmd devi netathrusb.inf手工加载驱动，成功加载了无线网络，并连通。
[ 本帖最后由 hlstudio 于 2012-7-26 10:44 编辑 ] 这个骨头版的需要下载收藏了。 请教一下 如何把这个PE安装到WIN7中 启动项如何修改？